ATP tree structures in planning book
Is there a way to pull quantites that are in the ATP Tree Structure into a planning book?
Michel -
We understand that once the ATP Tree Structure is converted, the values will appear in the planning book. Our issue is that we want the quantities to display in the planning book before and after conversion.
Our situation is that we are using Rules Based ATP and having the rule generate a stock transfer request. We are booking orders that are outside of the PPDS Horizon, so a stock transfer request is not generated, but the ATP Tree Structure is. We need to be able to see this quantity in our planning book, so we can take it into consideration during our runs.
Similar Messages
-
ATP Tree Structure is not getting created automatically after Sales Order is saved
In one one of our scenario, when we add material to Sales Order and save with Requirement Type(under Procurrement Tab of Sales Order) , in APO there is no planned order or only planned order which is dynamically pegged created because the ATP Tree in APO is not being converted. There is no pegging relevant item create(e.g. Planned Order). When we are checking the persistent ATP Trees in APO (/SAPAPO/ATREE_DSP - ATP-Trees) we can see that they are not converted automatically. They are still there. If we do it manually via transaction (/SAPAPO/RRP_ATP2PPDS - Conversion ATP Tree Structures -> Production Planning) it works. Afterwards the Planned Order is available and fixed pegged.
Why is APO not converting the ATP tree automatically ?
I also checked the scheduling horizon for conversion of the ATP Tree and it is correct: Is there any relation with Check Mode setting under ATP tab in Material Master?Hi Prasad ,
This enables you to debug the ATP tree . If you have created an entry here with your user name then it will not let ATP tree get converted into PP/DS orders automatically .
It's very surprising because all seems fine . Just cross check all the settings once with below .
The conversion time depends on the following horizons and dates:
· PP/DS Horizon
· Scheduling horizon for the conversion of ATP tree structures
· Requirements dates in the ATP tree structure
PP/DS immediately converts the ATP tree structure when the sales order is saved
· If the earliest requirements date for components is within the scheduling horizon or
· If the latest requirements date for finished products is within the PP/DS horizon
If none of these conditions are fulfilled when saving the sales order, the system saves the ATP tree structure in SAP APO. In this case you can only convert the ATP tree structure online or in the background when one of the conditions given above is fulfilled. Here, there is an offset for the horizons with which you can achieve an earlier conversion.
You maintain the scheduling horizon for the conversion of ATP tree structures in Customizing for Production Planning and Detailed Scheduling under Maintain Global Parameters and Defaults. You maintain a location product specific PP/DS horizon in the location product master. If no location product specific PP/DS horizon exists, the system uses the PP/DS horizon from the planning version. You maintain these in Model and Planning Version Management.
Love Singh -
ATP Tree Structure error -MATP
Hi Experts,
I am testing MATP with RBA, I could not see the planned orders in ATP tree structure once I saved the sales order in ECC.
Scenario -
I have product A (header) and A1 & A2 are the components of product A (Header)
I have stock on component A1 - 100 & component A2 - 100, STOCK on header material A -0
I have created sales order for header material A - customer requested quantity 201.
THEN system is confirming the sales order only for 100 qty because the components A1 & A2 stock available only 100.
I can see the dependent demand in rrp3 for Components A1 and A2
I can see the planned order in rrp3 for header material A
BUT I could not see any planned orders either in /SAPAPO/RRP_ATP2PPDS - Conversion ATP Tree Structures -> Production Planning OR
/SAPAPO/ATREE_DSP - ATP Tree Structures
below is the error message I am getting in the transaction -/SAPAPO/RRP_ATP2PPDS - Conversion ATP Tree Structure
What could be the wrong in the above case.. can you please suggest.. Advance thanks for your information.Hi Experts,
Can someone please help in the below ATP Tree Structure error-
I am not able to covert the sales orders from the ATP Tree Structure
The error message as below - Transaction - /SAPAPO/RRP_ATP2PPDS - Conversion ATP Tree Structures -> Production Planning
Can you just help me what could be the wrong in the setting and how to make the sales orders to be converted from this transaction /SAPAPO/RRP_ATP2PPDS
Error appears when I convert the sales orders from the ATP Tree Structure as below -
''The successor reqmts groups of the ATP tree structure were not converted''
Conversion canceled with error
ATP tree for sales order xxxx, item xx could not be converted
Thanks, -
Unable to create tree structure in Address Book like "Mail"
I'm moving from a Windows PC environment having used both Mozilla's Thunderbird (email) & Firefox (browser) successfully for years. Problem I'm encountering is setting up a similar structure in both Address Book & Mail!! I set my Mail structure as follows:
Leon Contacts
0800 Class
1100 Class
T'ai Chi
Earthquake E-tree
Branch 1
Branch 2
Branch 3
Branch 4
From my Apple phone conversations & One-On-One sessions, this is impossible. All Groups in Address Book are sorted in alphabetical order. There are NO sub-groups! When I'm composing a Mail for Mailbox, Leon Contacts, it's not easy to locate 1100 Class. It seems as though this logical approach to a tree structure would be useful for the community.
I'm at a loss for getting the mail addesses easily into Mail. Any interrim suggestions.Firefox doesn't do email, it's strictly a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, let us know and we can move this thread to the Thunderbird queue. This question currently is in the Firefox queue for answers. -
Planning Book Error during forcast voew
When i am change the dataview time bucket profile (i.e .Period structure settings) planning book for Monthly display of Data View instead of present view which is weekly an error pops up as:
Period to date 31.01.2008 cannot be determined
Message no. /SAPAPO/MA 120
Diagnosis
The system cannot interpret one or more of your data entries.
Procedure
Check the date parameters for this operation, and change accordingly.
please suggest what to check to resolve the problem...
thanks in advanceHi Kirankumar ,
This is the problem more related to the defining Proportional Factor
See <a href="https://websmp203.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=432360">OSS note 432360</a>
Thanks in advance for rewarding points if this helps ,,,
Regds ,Digs.... -
How to create Tree structure in Visual Composer
Hi All,
I need to develop tree structure in my VC application. Can any one of you please suggest me the steps to do it.Its very urgent please can any one help me out in this.
Regards,
LakshmiHi Nutan,
if you want to solve it with webdynpro it depends on your skills in java and abap. There are books available to start with webdynpro and there are examples for building tree structures with Webdynpro.
[Java Webdynpro|http://www.sappress.com/product.cfm?account=&product=H983]
[ABAP Webdynpro|http://www.sappress.com/product.cfm?account=&product=H1916]
If you want to do it in VC you have to write e.g. an ABAP rfc function module, which returns you the tree with the information about childnode, parentnode and so on, so that you can display it in the table. But if the users click on sort then the tree is "destroyed". You can also display only a few levels of your tree and when you select a certain node a drill down is done by calling a rfc which returns the child nodes of the corresponding node.
But I think the solution with VC is not the best. Use webdynpro for this requirements.
Best Regards,
Marcel -
Show Sales orders, STOs, & Deliveires in SNP planning book by Shipping Poin
We are using ECC 6.0 and SCM 7.0.
We have a requirement to model the Shipping point as a location in SNP. By this functionality we want to show Sales orders, STOs, & Deliveires in SNP planning book by Shipping Point in addition to Delivering Plant which is default now.
When I create Sales Orders in ECC system always perform shipping point determination and passon to APO per schedule line via CIF. These Sales Orders always show up in SNP under delivering plant/location. We also want to show them under Shipping Point location.
Here is what I have done so far:
1. I have created a CIF integration model for all required shipping points and CIFed over to APO. These locations are showing up in SNP planning book.
2. I have created Sales Orders and verified the shipping points are determined correctly and sent Sales Orders to APO successfully.
3. I see all the Sales Orders in SNP planning book at delivering plant/location.
4. But I don't see any sales orders under shipping point. They also don't show in RRP3 screen.
5. If I create a forecast in RRP3 at Shipping Point location they show-up in SNP planning book at Shipping point location.
Any idea how to model shipping points in SNP for planning?check what the ATP order type is of these orders are (from RRP3)
then check what ATP group these order types are assigned to (from SPRO)
then in the SNP Planning are make sure the Keyfigure you want to see them in refers to the ATP group from above
Which planning book are you using? Is it a standard book/ copy of a standard book? What KF are you expecting to see it under... the standard book has KF for planned production that will be same as your PPDS planned orders -
How to show an ALV grid in planning book (using macro-exit)
Hi Expertss,
I am using a macro-exit. Now in the execution flow of this macro-exit I am required to shaow an ALV grid. I tried calling a Zreport in which i am calling alv screen(screen type dialog box). It is giving a short-dump saying Exception condition "CNTL_ERROR" raised.
If i comments the fieldcatlog and structure name while calling the ALV in my Zreport then the alv is coming but then planning book is not vivible.
Kindly tell what thing I am missing and what probable thing I can do to make it work.
Thanks a lot in advance.I got the solution.
-
How to create tree structure in abap
hi,
I am mohan. Please send the how to create the tree structure. how to insert the child nodes in root node. actually our requirement is we have list transaction codes. We are planning to put all transaction codes in tree level.
please tell me how to do the program in tree structure.Hi Mohan,
Check the following program on ALV tree.
REPORT zalvtree.
CLASS cl_gui_column_tree DEFINITION LOAD.
CLASS cl_gui_cfw DEFINITION LOAD.
DATA: go_grid TYPE REF TO cl_gui_alv_grid.
DATA: ro_grid TYPE REF TO cl_gui_alv_grid.
DATA tree1 TYPE REF TO cl_gui_alv_tree.
DATA mr_toolbar TYPE REF TO cl_gui_toolbar.
DATA : gt_checked TYPE lvc_t_chit,
gs_checked LIKE LINE OF gt_checked,
l_part_key TYPE lvc_nkey,
gt_node TYPE lvc_s_chit-nodekey.
INCLUDE <icon>.
INCLUDE zamit_alv_tree_toolbar_event.
INCLUDE zbcalv_tree_event_receiver.
*DATA: toolbar_event_receiver TYPE REF TO lcl_toolbar_event_receiver.
DATA: gt_sflight TYPE sflight OCCURS 0, "Output-Table
gt_fieldcatalog TYPE lvc_t_fcat, "Fieldcatalog
ok_code LIKE sy-ucomm. "OK-Code
START-OF-SELECTION.
END-OF-SELECTION.
CALL SCREEN 100.
*& Module PBO OUTPUT
process before output
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
IF tree1 IS INITIAL.
PERFORM init_tree.
else.
CALL METHOD me->refresh_table_display
EXCEPTIONS
PROGRAM_ERROR = 1
others = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
CALL METHOD cl_gui_cfw=>flush.
ENDMODULE. " PBO OUTPUT
*& Module PAI INPUT
process after input
MODULE pai INPUT.
CASE ok_code.
WHEN 'EXIT' OR 'BACK' OR 'CANC'.
PERFORM exit_program.
*mrk
WHEN 'MOVE'.
PERFORM check_selection.
WHEN 'MBAK'.
PERFORM another_selection.
WHEN 'ALL'.
PERFORM select_all.
WHEN 'CLEAR'.
PERFORM clear_all.
WHEN 'DELETE'.
PERFORM delete_all.
WHEN 'EXPAND'.
PERFORM expand_all.
WHEN 'COLLAPSE'.
PERFORM collapse_all.
WHEN OTHERS.
CALL METHOD cl_gui_cfw=>dispatch.
ENDCASE.
CLEAR ok_code.
CALL METHOD cl_gui_cfw=>flush.
ENDMODULE. " PAI INPUT
*& Form build_fieldcatalog
build fieldcatalog for structure sflight
FORM build_fieldcatalog.
get fieldcatalog
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SFLIGHT'
CHANGING
ct_fieldcat = gt_fieldcatalog.
change fieldcatalog
DATA: ls_fieldcatalog TYPE lvc_s_fcat.
LOOP AT gt_fieldcatalog INTO ls_fieldcatalog.
CASE ls_fieldcatalog-fieldname.
WHEN 'CARRID' OR 'CONNID' OR 'FLDATE'.
ls_fieldcatalog-no_out = 'X'.
ls_fieldcatalog-key = ''.
WHEN 'PRICE' OR 'SEATSOCC' OR 'SEATSMAX' OR 'PAYMENTSUM'.
ls_fieldcatalog-do_sum = 'X'.
ENDCASE.
MODIFY gt_fieldcatalog FROM ls_fieldcatalog.
ENDLOOP.
ENDFORM. " build_fieldcatalog
*& Form build_hierarchy_header
build hierarchy-header-information
-->P_L_HIERARCHY_HEADER strucxture for hierarchy-header
FORM build_hierarchy_header CHANGING
p_hierarchy_header TYPE treev_hhdr.
p_hierarchy_header-heading = 'Hierarchy Header'. "#EC NOTEXT
p_hierarchy_header-tooltip =
'This is the Hierarchy Header !'. "#EC NOTEXT
p_hierarchy_header-width = 30.
p_hierarchy_header-width_pix = ''.
ENDFORM. " build_hierarchy_header
*& Form exit_program
free object and leave program
FORM exit_program.
CALL METHOD tree1->free.
LEAVE PROGRAM.
ENDFORM. " exit_program
*& Form check_selection
text
--> p1 text
<-- p2 text
FORM check_selection .
create container for alv-tree
DATA: l_tree_container_name(30) TYPE c,
l_custom_container2 TYPE REF TO cl_gui_custom_container.
l_tree_container_name = 'TREE2'.
IF sy-batch IS INITIAL.
CREATE OBJECT l_custom_container2
EXPORTING
container_name = l_tree_container_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
MESSAGE x208(00) WITH 'ERROR'. "#EC NOTEXT
ENDIF.
ENDIF.
CREATE OBJECT go_grid
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = l_custom_container2
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
others = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
PERFORM load_data_into_grid.
*data: lt_nodes type LVC_T_NKEY,
ls_nodes like line of lt_nodes,
ls_checked like line of gt_checked.
*loop at gt_checked into ls_checked.
ls_nodes = ls_checked-nodekey.
append ls_nodes to lt_nodes.
*endloop.
*CALL METHOD tree1->unselect_nodes
EXPORTING
it_node_key = lt_nodes
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
DP_ERROR = 2
MULTIPLE_NODE_SELECTION_ONLY = 3
ERROR_IN_NODE_KEY_TABLE = 4
FAILED = 5
others = 6
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
ENDFORM. " check_selection
*& Form another_selection
text
--> p1 text
<-- p2 text
FORM another_selection .
create container for alv-tree
DATA: l_tree_container_name(30) TYPE c,
l_custom_container2 TYPE REF TO cl_gui_custom_container.
l_tree_container_name = 'TREE2'.
IF sy-batch IS INITIAL.
CREATE OBJECT l_custom_container2
EXPORTING
container_name = l_tree_container_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
MESSAGE x208(00) WITH 'ERROR'. "#EC NOTEXT
ENDIF.
ENDIF.
CREATE OBJECT ro_grid
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = l_custom_container2
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
others = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
PERFORM load_data_into_grid1.
DATA: lt_unsel TYPE lvc_t_nkey,
ls_unsel LIKE LINE OF lt_unsel.
LOOP AT gt_checked INTO gs_checked.
ls_unsel = gs_checked-nodekey.
APPEND ls_unsel TO lt_unsel.
ENDLOOP.
CALL METHOD tree1->unselect_nodes
EXPORTING
it_node_key = lt_unsel
EXCEPTIONS
cntl_system_error = 1
dp_error = 2
multiple_node_selection_only = 3
error_in_node_key_table = 4
failed = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*CALL METHOD tree1->unselect_all
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
FAILED = 2
others = 3
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
DATA: text TYPE lvc_value,
item TYPE lvc_t_layi,
node TYPE lvc_s_layn,
inode TYPE lvc_nkey.
FIELD-SYMBOLS: <wa> TYPE ANY.
DATA: l_dref_wa LIKE LINE OF gt_sflight.
ASSIGN l_dref_wa TO <wa>.
READ TABLE gt_checked INTO gs_checked WITH KEY nodekey = 3.
inode = gs_checked-nodekey.
CALL METHOD tree1->get_outtab_line
EXPORTING
i_node_key = inode
IMPORTING
e_outtab_line = <wa>
e_node_text = text
et_item_layout = item
es_node_layout = node
EXCEPTIONS
node_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA: lt_layout TYPE lvc_t_laci,
layout LIKE LINE OF lt_layout.
layout-chosen = 'X'.
layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-chosen = 'X'. "To give default checkbox value checked
layout-class = cl_gui_column_tree=>item_class_checkbox.
layout-editable = 'X'.
LAYOUT-U_CHOSEN = 'X'.
APPEND layout TO lt_layout.
CALL METHOD tree1->change_node
EXPORTING
i_node_key = inode
i_outtab_line = <wa>
IS_NODE_LAYOUT =
it_item_layout = lt_layout
I_NODE_TEXT =
I_U_NODE_TEXT =
EXCEPTIONS
node_not_found = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*CALL METHOD tree1->change_item
EXPORTING
i_node_key = inode
i_fieldname = gs_checked-FIELDNAME
i_data = <wa>
I_U_DATA = ''
IS_ITEM_LAYOUT = layout
EXCEPTIONS
NODE_NOT_FOUND = 1
others = 2
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
*loop at lt_unsel into ls_unsel.
*CALL METHOD tree1->update_checked_items
EXPORTING
i_node_key = ls_unsel
i_fieldname = ''
i_checked = ''
EXCEPTIONS
PROGRAM_ERROR = 1
others = 2
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
*endif.
ENDFORM. " another_selection
*& Form select_all
text
--> p1 text
<-- p2 text
FORM select_all .
CONSTANTS: c_x(1) TYPE c VALUE 'X'.
*********Check box modifications.
CALL METHOD tree1->delete_all_nodes
EXCEPTIONS
failed = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear l_part_key.
create hierarchy
PERFORM create_hierarchy USING c_x.
CALL METHOD tree1->expand_node
EXPORTING
i_node_key = gt_node
I_LEVEL_COUNT = 1
i_expand_subtree = 'X'
EXCEPTIONS
failed = 1
illegal_level_count = 2
cntl_system_error = 3
node_not_found = 4
cannot_expand_leaf = 5
OTHERS = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
add own functioncodes to the toolbar
perform change_toolbar.
register events
perform register_events.
adjust column_width
call method tree1->COLUMN_OPTIMIZE.
ENDFORM. " select_all
*& Form clear_all
text
--> p1 text
<-- p2 text
FORM clear_all .
CONSTANTS: c_x(1) TYPE c VALUE space.
*********Check box modifications.
CALL METHOD tree1->delete_all_nodes
EXCEPTIONS
failed = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
create hierarchy
PERFORM create_hierarchy USING c_x.
CALL METHOD tree1->expand_node
EXPORTING
i_node_key = gt_node
I_LEVEL_COUNT = 1
i_expand_subtree = 'X'
EXCEPTIONS
failed = 1
illegal_level_count = 2
cntl_system_error = 3
node_not_found = 4
cannot_expand_leaf = 5
OTHERS = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " clear_all
*& Form delete_all
text
--> p1 text
<-- p2 text
FORM delete_all .
*********Check box modifications.
CALL METHOD tree1->delete_all_nodes
EXCEPTIONS
failed = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " delete_all
*& Form expand_all
text
--> p1 text
<-- p2 text
FORM expand_all .
CALL METHOD tree1->expand_node
EXPORTING
i_node_key = gt_node
I_LEVEL_COUNT = 1
i_expand_subtree = 'X'
EXCEPTIONS
failed = 1
illegal_level_count = 2
cntl_system_error = 3
node_not_found = 4
cannot_expand_leaf = 5
OTHERS = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " expand_all
*& Form collapse_all
text
--> p1 text
<-- p2 text
FORM collapse_all .
CALL METHOD tree1->collapse_all_nodes
EXCEPTIONS
failed = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " collapse_all
*& Form load_data_into_grid
text
--> p1 text
<-- p2 text
FORM load_data_into_grid .
DATA:
For parameter IS_VARIANT
l_layout TYPE disvariant,
gs_layout TYPE lvc_s_layo.
DATA gi_sflight TYPE TABLE OF zsflight.
Load data into the grid and display them
l_layout-report = sy-repid.
gs_layout-grid_title = 'Amits Test Program'.
gs_layout-sel_mode = 'A'.
SELECT *
FROM zsflight
INTO TABLE gi_sflight.
CALL METHOD go_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
is_layout = gs_layout
is_variant = l_layout
i_save = 'A'
CHANGING
it_outtab = gi_sflight.
ENDFORM. " load_data_into_grid
*& Form load_data_into_grid
text
--> p1 text
<-- p2 text
FORM load_data_into_grid1.
DATA:
For parameter IS_VARIANT
l_layout TYPE disvariant,
gs_layout TYPE lvc_s_layo.
DATA gi_sflight TYPE TABLE OF zapempl.
Load data into the grid and display them
l_layout-report = sy-repid.
gs_layout-grid_title = 'Rams Test Program'.
gs_layout-sel_mode = 'A'.
SELECT *
FROM zapempl
INTO TABLE gi_sflight.
CALL METHOD ro_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'ZAPEMPL'
is_layout = gs_layout
is_variant = l_layout
i_save = 'A'
CHANGING
it_outtab = gi_sflight.
ENDFORM. " load_data_into_grid1
*& Form build_header
build table for html_header
--> p1 text
<-- p2 text
FORM build_comment USING
pt_list_commentary TYPE slis_t_listheader
p_logo TYPE sdydo_value.
DATA: ls_line TYPE slis_listheader.
LIST HEADING LINE: TYPE H
CLEAR ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: NOT USED FOR THIS TYPE
ls_line-info = 'ALV-tree-demo: flight-overview'. "#EC NOTEXT
APPEND ls_line TO pt_list_commentary.
STATUS LINE: TYPE S
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-key = 'valid until'. "#EC NOTEXT
ls_line-info = 'January 29 1999'. "#EC NOTEXT
APPEND ls_line TO pt_list_commentary.
ls_line-key = 'time'.
ls_line-info = '2.00 pm'. "#EC NOTEXT
APPEND ls_line TO pt_list_commentary.
ACTION LINE: TYPE A
CLEAR ls_line.
ls_line-typ = 'A'.
LS_LINE-KEY: NOT USED FOR THIS TYPE
ls_line-info = 'actual data'. "#EC NOTEXT
APPEND ls_line TO pt_list_commentary.
p_logo = 'ENJOYSAP_LOGO'.
ENDFORM. "build_comment
*& Form create_hierarchy
text
--> p1 text
<-- p2 text
FORM create_hierarchy USING p_x.
DATA: ls_sflight TYPE sflight,
lt_sflight TYPE sflight OCCURS 0.
get data
SELECT * FROM sflight INTO TABLE lt_sflight
UP TO 200 ROWS .
SORT lt_sflight BY carrid connid fldate.
add data to tree
DATA: l_carrid_key TYPE lvc_nkey,
l_connid_key TYPE lvc_nkey,
l_last_key TYPE lvc_nkey.
l_part_key TYPE lvc_nkey
PERFORM add_carrid_line USING ls_sflight
CHANGING l_part_key.
gt_node = l_part_key.
LOOP AT lt_sflight INTO ls_sflight.
ON CHANGE OF ls_sflight-carrid.
PERFORM add_carrid_line USING ls_sflight
l_part_key
CHANGING l_carrid_key.
PERFORM add_connid_line USING ls_sflight
l_carrid_key
CHANGING l_connid_key.
PERFORM add_complete_line USING ls_sflight
l_connid_key
p_x
CHANGING l_last_key.
CONTINUE.
ENDON.
ON CHANGE OF ls_sflight-connid.
PERFORM add_connid_line USING ls_sflight
l_carrid_key
CHANGING l_connid_key.
PERFORM add_complete_line USING ls_sflight
l_connid_key
p_x
CHANGING l_last_key.
CONTINUE.
ENDON.
PERFORM add_complete_line USING ls_sflight
l_connid_key
p_x
CHANGING l_last_key.
ENDLOOP.
calculate totals
CALL METHOD tree1->update_calculations.
this method must be called to send the data to the frontend
CALL METHOD tree1->frontend_update.
ENDFORM. " create_hierarchy
*& Form add_carrid_line
add hierarchy-level 1 to tree
-->P_LS_SFLIGHT sflight
-->P_RELEATKEY relatkey
<-->p_node_key new node-key
FORM add_carrid_line USING ps_sflight TYPE sflight
p_relat_key TYPE lvc_nkey
CHANGING p_node_key TYPE lvc_nkey.
DATA: l_node_text TYPE lvc_value,
ls_sflight TYPE sflight.
set item-layout
DATA: lt_item_layout TYPE lvc_t_layi,
ls_item_layout TYPE lvc_s_layi.
ls_item_layout-t_image = '@3P@'.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-style =
cl_gui_column_tree=>style_intensifd_critical.
APPEND ls_item_layout TO lt_item_layout.
add node
l_node_text = ps_sflight-carrid.
CALL METHOD tree1->add_node
EXPORTING
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
i_node_text = l_node_text
is_outtab_line = ls_sflight
it_item_layout = lt_item_layout
IMPORTING
e_new_node_key = p_node_key.
ENDFORM. " add_carrid_line
*& Form add_connid_line
add hierarchy-level 2 to tree
-->P_LS_SFLIGHT sflight
-->P_RELEATKEY relatkey
<-->p_node_key new node-key
FORM add_connid_line USING ps_sflight TYPE sflight
p_relat_key TYPE lvc_nkey
CHANGING p_node_key TYPE lvc_nkey.
DATA: l_node_text TYPE lvc_value,
ls_sflight TYPE sflight.
set item-layout
DATA: lt_item_layout TYPE lvc_t_layi,
ls_item_layout TYPE lvc_s_layi.
ls_item_layout-t_image = '@3Y@'.
ls_item_layout-style =
cl_gui_column_tree=>style_intensified.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
APPEND ls_item_layout TO lt_item_layout.
add node
l_node_text = ps_sflight-connid.
CALL METHOD tree1->add_node
EXPORTING
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
i_node_text = l_node_text
is_outtab_line = ls_sflight
it_item_layout = lt_item_layout
IMPORTING
e_new_node_key = p_node_key.
ENDFORM. " add_connid_line
*& Form add_cmplete_line
add hierarchy-level 3 to tree
-->P_LS_SFLIGHT sflight
-->P_RELEATKEY relatkey
<-->p_node_key new node-key
FORM add_complete_line USING ps_sflight TYPE sflight
p_relat_key TYPE lvc_nkey
p_x
CHANGING p_node_key TYPE lvc_nkey.
DATA: l_node_text TYPE lvc_value.
set item-layout
DATA: lt_item_layout TYPE lvc_t_layi,
ls_item_layout TYPE lvc_s_layi.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-chosen = p_x. "To give default checkbox value checked
ls_item_layout-class = cl_gui_column_tree=>item_class_checkbox.
ls_item_layout-editable = 'X'.
APPEND ls_item_layout TO lt_item_layout.
l_node_text = ps_sflight-fldate.
CALL METHOD tree1->add_node
EXPORTING
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
is_outtab_line = ps_sflight
i_node_text = l_node_text
it_item_layout = lt_item_layout
IMPORTING
e_new_node_key = p_node_key.
ENDFORM. " add_complete_line
*& Form register_events
text
--> p1 text
<-- p2 text
FORM register_events.
define the events which will be passed to the backend
DATA: lt_events TYPE cntl_simple_events,
l_event TYPE cntl_simple_event.
define the events which will be passed to the backend
l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_checkbox_change.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_click.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_keypress.
APPEND l_event TO lt_events.
CALL METHOD tree1->set_registered_events
EXPORTING
events = lt_events
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
illegal_event_combination = 3.
IF sy-subrc <> 0.
MESSAGE x208(00) WITH 'ERROR'. "#EC NOTEXT
ENDIF.
set Handler
DATA: l_event_receiver TYPE REF TO lcl_tree_event_receiver.
CREATE OBJECT l_event_receiver.
SET HANDLER l_event_receiver->handle_node_ctmenu_request
FOR tree1.
SET HANDLER l_event_receiver->handle_node_ctmenu_selected
FOR tree1.
SET HANDLER l_event_receiver->handle_item_ctmenu_request
FOR tree1.
SET HANDLER l_event_receiver->handle_item_ctmenu_selected
FOR tree1.
SET HANDLER l_event_receiver->handle_checkbox_change FOR tree1.
ENDFORM. " register_events
*& Form change_toolbar
text
--> p1 text
<-- p2 text
FORM change_toolbar.
DATA: toolbar_event_receiver TYPE REF TO lcl_toolbar_event_receiver.
get toolbar control
CALL METHOD tree1->get_toolbar_object
IMPORTING
er_toolbar = mr_toolbar.
CHECK NOT mr_toolbar IS INITIAL.
add seperator to toolbar
CALL METHOD mr_toolbar->add_button
EXPORTING
fcode = ''
icon = ''
butn_type = cntb_btype_sep
text = ''
quickinfo = 'This is a Seperator'. "#EC NOTEXT
add Standard Button to toolbar (for Delete Subtree)
CALL METHOD mr_toolbar->add_button
EXPORTING
fcode = 'DELETE'
icon = '@18@'
butn_type = cntb_btype_button
text = ''
quickinfo = 'Delete subtree'. "#EC NOTEXT
add Dropdown Button to toolbar (for Insert Line)
CALL METHOD mr_toolbar->add_button
EXPORTING
fcode = 'INSERT_LC'
icon = '@17@'
butn_type = cntb_btype_dropdown
text = ''
quickinfo = 'Insert Line'. "#EC NOTEXT
set event-handler for toolbar-control
CREATE OBJECT toolbar_event_receiver.
SET HANDLER toolbar_event_receiver->on_function_selected
FOR mr_toolbar.
SET HANDLER toolbar_event_receiver->on_toolbar_dropdown
FOR mr_toolbar.
ENDFORM. " change_toolbar
*& Form init_tree
text
--> p1 text
<-- p2 text
FORM init_tree.
create fieldcatalog for structure sflight
PERFORM build_fieldcatalog.
create container for alv-tree
DATA: l_tree_container_name(30) TYPE c,
l_custom_container TYPE REF TO cl_gui_custom_container.
l_tree_container_name = 'TREE1'.
IF sy-batch IS INITIAL.
CREATE OBJECT l_custom_container
EXPORTING
container_name = l_tree_container_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
MESSAGE x208(00) WITH 'ERROR'. "#EC NOTEXT
ENDIF.
ENDIF.
create tree control
CREATE OBJECT tree1
EXPORTING
parent = l_custom_container
node_selection_mode = cl_gui_column_tree=>node_sel_mode_multiple "node_sel_mode_single
item_selection = 'X'
no_html_header = ''
no_toolbar = ''
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
illegal_node_selection_mode = 5
failed = 6
illegal_column_name = 7.
IF sy-subrc <> 0.
MESSAGE x208(00) WITH 'ERROR'. "#EC NOTEXT
ENDIF.
create Hierarchy-header
DATA l_hierarchy_header TYPE treev_hhdr.
PERFORM build_hierarchy_header CHANGING l_hierarchy_header.
create info-table for html-header
DATA: lt_list_commentary TYPE slis_t_listheader,
l_logo TYPE sdydo_value.
PERFORM build_comment USING
lt_list_commentary
l_logo.
repid for saving variants
DATA: ls_variant TYPE disvariant.
ls_variant-report = sy-repid.
create emty tree-control
CALL METHOD tree1->set_table_for_first_display
EXPORTING
is_hierarchy_header = l_hierarchy_header
it_list_commentary = lt_list_commentary
i_logo = l_logo
i_background_id = 'ALV_BACKGROUND'
i_save = 'A'
is_variant = ls_variant
CHANGING
it_outtab = gt_sflight "table must be emty !!
it_fieldcatalog = gt_fieldcatalog.
CONSTANTS: c_s(1) TYPE c VALUE space.
create hierarchy
PERFORM create_hierarchy USING c_s.
add own functioncodes to the toolbar
PERFORM change_toolbar.
register events
PERFORM register_events.
adjust column_width
call method tree1->COLUMN_OPTIMIZE.
ENDFORM. " init_tree
Award points if found useful.
Regards
Indrajit -
Demand on VC material not visible in SNP planning book
Hi Experts,
Is there any way to plan VC (Variant Configuration ) materials in SNP at the group level ?
I will explain the scenario more in details below
I have an VC material say X. Material X has end product Y attached to it (material variant). When material X is cifed to APO, it appears as configurable product in APO & is a top level product. Now when I create a demand on material X through DP, the demand appears in product view (RRP3). However the demand does not appear in the SNP planning book nor it gets selected during background planning run. The system is configured as Variant Configuration & not CDP.
Is it possible to plan material X in SNP ? If possible how can the demand be read in SNP ?
Thanks in advance
Regards
SandeepHi Sandeep,
One of the limitations of Characteristics Based Forecasting is, CBF results can only be used in PPDS and not in SNP, hence it is not possible to plan that material X in SNP. Even though you use MC90 transaction which is release DP to SNP, but the data will not be available in SNP
That material X will be planned only in PPDS, there are two ways to plan, those are
1. one way is by releasing CBF results to active version using MC90 transaction, during this release, you should maintain consumption group in release settings and in product master, in this case you have to use Forecast Check/Allocation check as a part of ATP/GATP, here you can not use CTP or MATP
2.the other way is by releasing CBF results to inactive version using MC90 transaction, during this release you should not define consumption groups, generate the dependent requirements in inactive verison using heuristics in PPDS , and convert dependent requirements from inactive version to Forecast - active version using /SAPAPO/DMP2 transaction, in this case you can use MATP/CTP as a part of GATP
-Deepak -
Process orders not reflecting in SNP planning book
Hi,
I am facing a problem here that the SNP planned orders once converted into process orders in ECC are not reflecting in the SNP planning book.
However if i check the /sapapo/rrp3 product view, the process orders are visible here.
Kindly help me understand if i am missing out something here.
Thanks,
NalinHi,
Please Check whether the ATP category is assigned to the Category group which is assigned to KF in the planning.
If that is assigned rightly then run TS cons check.
Regards,
Kishore Reddy. -
How to manually enter forcast/demand in SNP Planning Book
Hi experts,
Kindly help me there are two questions on my mind. First
1. How to create manually forecast in SNP planning book? and also in RRP3? (if the product is in house it automatically creates planned order, if externally procured PREQ but how about forecast using product view?
2. If the forecast is in the past but I want to upload that in the SNP Planning book?
Even if I change the period structure date it does not reflect the past dates in the planning book. Since the planning book of SNP is standard how am I be able to change the planning book time bucket start date.
Thanks and Best Regards!!!!Hi,
in /SAPAPO/SJKTST04 you set the type of order FCST, then you planning area and version, keyfigure to populate (your forecast keyfigure, probably 9ADFCST), the order type (usually FA)
In the details you set product, date to start, in horizon - the number of orders to create, if you set 10, you'll get 10 orders starting from your start date).
Unfortunately through here, you gan create orders with fixed quantity only and also for only one product/location combination.
If you already have DP available, even for testing I find it more easy to release forecast from there.
For your second question - at least for 4.1 (I don't have a 5.0 system to check) you cannot have past dates in a column other than "Initial"
Hope that helps,
br,
Mikhail -
Transport planning book from Production to Dev/ Test system
Hi APO Gurus,
I need clarity for below mentioned point u2013
I have a correct planning book in production system. I have a different structure in testing as well as in quality system. I want to transport planning book with all data views and macrou2019s associated with it to development system (or in test system).
How to do this? Please elaborate with details
Thanks in advance.I did the transport from Production to Dev client using TSOBJ last week. Basis team helped in connecting Prod and Dev clients.
Everyting went ok except selection IDs. When I check 'with selection transport' in TSOBJ, it ends up in short dump saying Timed Out in reading SQL table /sapapo/sdpsetde. We increased the system profile parameter "rdisp/max_wprun_time" from 1800 seconds to 3600 seconds. It still timed out with same message. So, I created the transport without selection IDs and it worked.
Next, I downloaded the only required selection IDs (total 498) from the DP Planning Area in Production client to excel spreadsheet using table /sapapo/TS_SELKO. Then created another transport using TSOBJ.....this time I used the 'Transport of Selections' section for Selection IDs and used single value selection from drop down, uploaded the IDs from clipboard option. That worked.
Although my problem is solved....but by any chance, has anyone encountered that TSOBJ Timed out? Is there any OSS note for this?
-Sachin -
How to Transport a planning book to another system
Hello,
Can someone please let me know how to transport a planning book to another system?
Thanks for your time.
Sarath.Dear Sarath,
Transporting Macro Books:
You can add macro books to a transport request so that they are transported to the target system(s) when the request is released. When you transport a macro book, the system exports relevant notes directly to the target system. For this, you must specify the relevant RFC destination.
To be able to use macro books in another system, you need to have already exported other objects such as the relevant planning object structures and planning areas to the target system. You do this in Customizing for Demand Planning or Supply Network Planning under Basic Settings -> Maintain Manual Transport Link for DP/SNP. You can also use this activity to transport macro books. If the planning area does not exist in the target system, you can transport the macro book, but you cannot open the macro book or use the macros.
To transport a macro book, select the book and choose Tools -> Transport Macro Books. On the dialog box that appears, enter an existing transport request or create new one. The transport request determines the system to which the macro book is transported. Choose Enter.
Regards,
Naveen. -
Adding a attribute in Demand planning book.
Hello Experts.
We do have a "location" as a attribute in various planning book, now we have to add it another planning book, where its need from business.
Could you please let me know what procedure has to be adopted to add a existing attribute in another planning book ?
Regards
Rahul ChitteRahul
The changes that you need to make may be very simple or too complex based on the answer to one question - Is the master planning object structure the same for both planning books ( that is the planning book that has location attribute and pb that does not have location attribute). . If the MPOS is the same then your changes can be done easily. The mpos associated with a pb can be found by going to the pb in /n/sapapo/sdp94 and right clicking on it and displaying details.
If the mpos is the same, then all you have to do is go to the planning book in /n/sapapo/sdp8B , go to characteristic tab and drag the location attribute from right to left and hit continue and save. Thats it you are done.
But if the mpo structues are different , then you first have to add the location characteristics to the mpos. For this you have to deactivate the mpos and when you do this you will lose all your cvc's . So you have to backup the data before you deactivate the mpos. Then add the location characteristic and activate the mpos and reload the data to the mpos. This is a very complex and critical process .
Thanks
Aparna
Maybe you are looking for
-
Hello everybody, I am dealing with transfert orders return. I created a delivery (VL10G) , posted goods issue (VL02N), and posted goods receipt on the other side (MIGO on Outbound delivery- mvt 101). I then created a return delivery (MIGO Return Deli
-
Newest iTunes blows big time! Can I have the old one back :(
Seriously, I cant find anything, cant do anything, shuffle does not work, the views suck, I want the old horizontal album cover view back. Makes me want to go buy a Samsung or something different.... for the first time in 4 years.... I wont even get
-
Restart Managed Server from Adminserver FAILED_NOT_RESTARTABLE
Hi all, I've got problems restarting the managed server from the adminkonsole ('Control'-Tab) and from within wlst while connected to the adminserver 'start('mymanaged','Server','t3://localhost:80', block='true') connected with the adminserver. In th
-
New MySQL Turbo Manager 2.5.5.0 - Download Now
Hello Mentat Technologies announces his new MySQL Turbo Manager Version 2.5.5.0 with features like : Query Builder New editor options. Improvements in the reports generation. New export options. URL : http://www.mentattech.com Regards, Peter
-
Hi all. I have a little question. I have made a Mac OS X app that uses CoreData with a DataModel and SQLite method. Once the DB is created if I want to update it with, for example, another field, how I can to do that? If I change only the DataModel t