Attached iPod to TV but not getting any audio

I attached iPod to TV via Apple's digital A/V adapter and HDMI cable.  The video works great but I am not getting any sound. My tv is a samsung smart tv and I also have a samsung home theater system. I even turned of the home theater system completely to see if that was the issue but no audio comes through either device or the iPod when it is connected.  Any ideas are appreciated. Thanks!

I attached iPod to TV via Apple's digital A/V adapter and HDMI cable.  The video works great but I am not getting any sound. My tv is a samsung smart tv and I also have a samsung home theater system. I even turned of the home theater system completely to see if that was the issue but no audio comes through either device or the iPod when it is connected.  Any ideas are appreciated. Thanks!

Similar Messages

  • I was working on a project a few days ago and now I'm not getting any audio or visuals out of it. In the project file the screen went grey. Not sure how to fix this. I'm new to iMovie, but the program seems easy to use and my Mac is new. Any help?

    I used to use Movie Maker and it would be able to handle lots of file uploads and big projects. I figure iMovie can do the same since it's newer and it's on my iMac. I was working on a project for a few months, it was working fine up until about a few days ago when the project file just stopped working. Not getting any audio or visuals and the screen went grey. I hope to not lose the project file as I've spent a lot of time on it. The project will still show up in iMovie, but it won't play. Other project files will, but this one won't for some reason. It's my first time using this program and I assumed it would be fine, but now it's causing me big problems. Anyone else run into a similar problem?

    But it is I jsut can sync, back up files, or anything becuase its stuck at this screene and wont do execute when i click either of those button

  • I have a bose docking station with a 30 pin connector and purchased the Ipod 5G and also have a Ipad4th Gen and have tried several connectors but cannot get any audio.  Any suggestions?

    I have a Ipod Touch 5G and a Ipad 4th Gen with a Bose sound dock with a 30 pin adapter.  I have tried several connectors but cannot get any audio on the sound dock.  Do you have any suggestions?

    Have you tried this adapter from the Apple on-line store http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=3c  They also have one that uses a cord to connect the dock to lightning that is $10 more.

  • TS5150 We just set up our Apple TV 3rd gen but not getting any sound. We have the boss system hooked up to the cable tv. Support could not help us, we were told to call Boss.

    We just set up our Apple TV but not getting any sound. We have the Boss sound system. Support could not help us they directed us to call a Boss.

    Do you mean Bose sound system? What model?

  • Not getting any audio

    Just setting up a new AppleTV and all is good except not getting any audio -- help

    Welcome to the Apple Community.
    Please tell us a little more, are you using a receiver/home theatre, how have you connected everything up.

  • I am Not getting any Audio on Videos in the Browsers.

    Hi Everyone,
    I am Not getting any Audio on Videos in the Browsers. My Powerbook otherwise plays CD's and the other Audio/video Apps works fine.
    Thanks in advance
    Jalion

    Which browsers?
    Would the browser content in question happen to be all the same format (eg flash)? Maybe you lack the application needed to play them.

  • Connected to Router, but not getting any Internet access

    Hello,
    So I recently got my parent's old router. It's a Linksys WRT54G. I had used it with my MBP when I lived with them a year ago, and I never had a problem. Airport was always able to locate their network and log into it.
    6 months ago I moved out and have been using a direct Ethernet connection to my Road Runner Cable modem. No problem.
    Yesterday I did some rearranging of my apartment, and now my computer isn't near a cable outlet. So I got the old router old and started getting it running.
    Over many stress filled hours I have it at the point where my MBP is connected to the network (I named it, gave it a password, it shows a strong signal), but I have no Internet access. I even ran the Network Diagnostics a couple times, and it said my Internet connection appeared to be working correctly. Yet I can't open up any pages in Safari.
    I don't know if I need to change any of the router settings?? Or if it's just an old router and I need a new one?? I've unplugged, replugged, and restarted everything numerous times, and still nothing.
    Thank you!

    Hi Rod,
    Let me start by mentioning that when I hit the 'reply' button to write this post, it took more than 6 min for the page to appear. During that time, the 'connected time' displayed to the right of the 'radar' icon slid in and out dozens of times (indicating a dropped connection). If you have the 'magic' broth, I'd be happy to drink it.
    You must have seen my posting on the InformationWeek website, which I wrote on after reading the review of the MacBook products in their email newsletter that I receive. I normally don't post on blogs but after reading the pulp in that review - after trying AppleCare and the Genius bar and seeing all of the posts here (with no fix forthcoming from Apple), I felt the need to both vent and to seek a solution outside of these discussion pages.
    I have posted the details of my MBP/Airport connectivity issues in detail on other threads here but I would be happy to reiterate them.
    My problems appeared to start after the 10.5.2 update. My connections became unbearably slow, to the point that I would begin to get Safari browser connection error messages (i.e., no server response...not connected to the internet, etc.) Then I noticed that the 'connected time' displayed to the right on the 'radar' icon in the menu bar was 'sliding' in and out (I didn't realize what this meant at the time but soon realized that every time it 'slid' out (disappeared) represented a 'droped' connection and when it 'slid' back (reappeared) it represented a reconnection. Both at home and at the office, I run under static IP addresses (home = MaxDSL with Westell modem to APEBSg; office = T-1x2 with NetGear). But about a month ago, I did some more testing. I run VM Ware and Windows Vista and my assumption had been, since Vista, running under VM Ware, utilizes all of the Mac I/O ports, that Vista would share the same slowness with the Mac Airport Wi-Fi. I tried it and, much to my surprise, the connection speed was great (like normal). I then tried an Ethernet hardwire to the Ethernet port on the APEBSg and got the same great connection speed.
    So, MBP Airport works with Vista but not with Mac OS and by-passing the Airport Wi-Fi with a hardwire works with both Vista and Mac OS. It's only the Mac OS trying to go through the onboard Airport that gets choked down to unacceptable connection speeds.
    I have tried all of the suggestions posted on the discussion board (resetting the CSM, PMU, etc). But, like everyone else, to no avail.
    So, it's all about being connected via Wi-Fi (with my 'portable'). That's my problem. And, as you can see from all of the posts, it's not just me. So, you must have received the 'wonder machine' when you got your MBP. My MBP is a 1st gen but you can read posts here of people who just bought theirs (some who indicated that they were 'switchers') and it wouldn't connect right out of the box with 10.5.2. So, I realized that it wasn't 'me' - it was a real problem.
    And, I might add that I've been an 'enthusiastic' Apple user since 1979. I've owned almost every model along the way - except for the LISA. In the past year alone, I've encouraged four people to 'switch' to Mac (three of whom I actually accompanied to the Apple Store and helped them with their selection). So, I'm a longtime - happy - user (my wife has a PBG4, my daugher a MacBook, my son a new MBP, plus I have an iMac and a CubeG4) who has hit a bump in the road and have become very frustrated by the fact that Apple does not appear to be responding to a real issue.
    I welcome any advice that you might have to offer.

  • HT201335 I have done this a few times but not getting any icon on my phone or iPad. Both Apple TV andiphone are the latest versions. Apple TV is picking up my music from my computer but I can't get iPhone to mirror at all.

    Help needed. Can't get any mirroring done between iPad/ iPhone to Apple TV and it is3rd generation.

    double click home button on iphone or ipad.
    then swipe right keep swiping intill you see the icon.

  • Not getting any audio...help

    im using the motu 828mk2 with logic express...i setup everything accoding to the book and cannot get any in put..the Coreaudio is set to the motu, and nothing..im getting the metronome ckick when i enable rec...but no audio level? any sugestions

    You need to make sure that in the track pannel, under I/O it is set to the input that your instrument or mic is plugged into.

  • I am not getting any audio frommy IMAC?

    Need Help,
         I recently turned in my IMAC to have the hard drive replaced due to a recall.  When I got it back I no longer have any audio or Safari.  I know it is not a hardware problem because I can hear the sound upon startup.  I am running OS X Lion 10.7.5.  Does anybody have any ides on where to start looking?  I have checked all possible volume controls and they are all on. There is no mutes on at all.
    Thanks,
    tvanscoyk

    Welcome to the Apple Support Communities
    First, reset the PRAM > http://support.apple.com/kb/HT1379 Then, the sound should be working. If not, open System Preferences > Sound > Output, and choose "Internal Speakers"

  • IPad 2 fully connected to Wi-Fi and a VPN, but not getting any internet access

    I'm on iOS 8.3 using an iPad 2, and the other day out of nowhere, I stopped getting internet connection to my iPad. I am still connected to my WiFi network as well as a VPN I was using before I lost internet connection (which is weird, as I figured I'd have lost that), and the WiFi icon is still there. I've tried multiple methods to try and fix the problem:
    updating the iPad (I was on iOS 8.1 when I lost connection)
    forgetting and then rejoining the network
    renewing the lease under the WiFi network's settings
    rebooting the iPad
    turning WiFi off and on
    turning airplane mode and Do Not Disturb mode on, then keeping the iPad turned off for 10 minutes (as suggested here: iPad connected to wifi, but no wifi icon and no internet access?)
    unplugging and then plugging back in the router's power
    turning off the VPN (it hadn't caused any problems for the week I had been using it, but I wanted to make sure)
    doing a hard reset on the iPad
    and NONE of these have done anything to help. I have no idea what to do now, as I can't seem to find really anymore possible solutions. Also, yes, I checked the network IP address and it doesn't start off with "169". And the iPad is the only thing that isn't getting internet access, every other device in my house is doing fine, so I don't think it's the WiFi network itself. Unfortunately I can't try connecting to another WiFi network either to see if I can still actually connect to the internet, as I live in a semi-rural area. I've never run into any issue like this in the 3 years I've had the iPad, and I have no idea what's going on. Will I need to take it into an Apple Store to have it fixed, or is there anything left I might be able to do myself?

    When you unplugged the router did you leave it off for at least 3.minutes?  Try unplugging it again, waiting & then bootimg back up.
    Try to connect your iPad again, 
    If you have another iOS device that is connected, check it's wifi settings under your network the IP address settings & cross compare it to your iPad 2
    Some routers also have settings where you can increase allowable connections. Have you tried connecting just your iPad with no other devices connected?
    if that doesn't work, I would suggest you try & find a public wifi hotspot to see if you can connect there.  If not, then I would suggest your next trip be to a Genius Bar to Let Apple diagnose the issue.

  • Time Capsule not backing up - but not getting any messages of failure

    Hello, I have had my Time Capsule installed successfully for about 5 months. Two weeks ago, it apparently stopped backing up. I was regularly seeing the hard drive icon appear on my desktop and the spinning icon in the top right hand menu bar, so I was assuming all was well. But recently something else cause me to open time machine to look for a file to restore and I found that Time Capsule hadn't backed anything up recently!
    I received no messages, got no failure notices - nothing!
    Now, when the icon appears, I have checked on the status and right now it says "Indexing backup." I don't know what stage it stops, because the icon just quietly disappears.
    What should I do?

    A clue may be lurking in your logs. See #A1 in [Time Machine - troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for a handy widget that will display the backup messages from your logs.
    If that shows errors, see #C2 there.
    If it doesn't, but shows very small amounts of data copied, see #D5 there.

  • 8500A ink leaving cartridge, but not getting as far as paper....

    Hi there.
    I'm having a real issue trying to get any black ink to reach the paper on my 8500A. It was working fine until my ink ran out about 3 weeks ago, now I need to do some printing I've gone and bought myself a new official cartridge.
    After installing (which I've done a million times in the past) and attempting a print the ink seems to be leaving the cartridge, but not getting any further than the springy mechanism it's attached to. I've tried both cleaning the printheads via the printer, and the springy plastic bit with a **bleep** cloth - which gets covered in black ink.
    I've attached two photos...

    Hello @dwfmagik,
    Welcome back to the HP Support Forums! I see you have recently replaced the black ink cartridge on your HP Officejet 8500A, but you are still not getting any black ink on the paper. I see you have tried to clean the printheads using the cleaning utility as well as inside the machine with no success.
    I would like you to continue troubleshooting here: Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Officejet Pro 8500A
    If after the troubleshooting you are still not able to print in black ink, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I'm not getting any sound when i play a video; HP pavilion dv7 Windows 7

    I'm not getting any audio when I try to play a video, such as youtube; I have an HP pavilion dv7....op sys is Windows 7;  Funny thing is that when my brother signs in under his User ID, he gets audio, but I don't when I'm the user.  I've checked all of the on/off audio mute buttons that I know of.
    what can you suggest?

    Is it just sites like YouTube? Can you play music files-mp3/cd ,hear Windows system sounds,etc?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Not getting any sound trying to record external synth in GB

    I'm trying to record my Alesis Andromeda synth into GB but not getting any sound. I am using an Emagic AMT-8 as a midi i/f & a MOTU 828mkII as a soundcard. Both are set up correctly in core midi/audio as I normally use Logic Pro 7 with no problems.
    In GB I add a new real instrument track & select the relevant input to corespond to my 828mkII, I then turn monitor 'on' but I am not getting any sound back to the 828mkII. Preferences shows that this soundcard is recognised.
    I can play AU instruments or GB instruments from the Andromeda so the midi connection is good.
    Any ideas? cheers....

    The Andromeda is plugged into line inputs 1&2 of the 828mkII (which is inputs 3&4 as the mic inputs are 1&2), The outputs of the 828mkII are plugged into my Genelec monitors. I know the set up works as I use Logic all the time, just can't get any sound in GB.
    thanks.

Maybe you are looking for