Attr Set not available in component

Hi Gurus, I am having some problems with add som fields in a componet.
I did exactly the same what this blog say
http://wiki.scn.sap.com/wiki/display/CRM/Creating+UI+Configuration+for+Set+Types+to+display+on+CRM+Product+Overview+page
The thing is when I do all this steps I cannot see my z attrset in my component PRD01OV.
I have noticed that I have 20 displayed assignments blocks, and only in my view I can see only 9 .
Does anybody knows how could be the problem?
Thanks in advance.
Regards

Do you need to enable the assignment block with personalization or in the BSP component workbench?
Thomas Wagner

Similar Messages

  • Session Property Set not available in Portal Administration Console

    We have a Portal Application (WLP 10.0 MP1) that needs to have visitor entitlements applied to allow some customization based upon a Session Property Set. The property set has been defined in Workshop and the .ses file is now included in our Portal EAR file in the /META-INF/data directory. When the EAR is deployed on a local (winXP) domain the property set is then available in the portal admin console and can be used to build entitlements. When the EAR is deployed to our test server (Solaris 10) the property set does not become available in the portal admin console. Both servers are in development mode and already have a previous version of the EAR deployed in streaming mode.
    Is there anything obvious that needs to be done to ensure that a property set is enabled when deploying a new EAR?

    We are actually performing the portal EAR build using maven but are creating the same directory layout as is created by Workshop when a data sync project is used and an EAR exported, i.e. the contents of the data sync project ends up in the EAR /META-INF/data directory.
    The mystery here is that the property set correctly deploys in one environment but not in another. I'd really like to know whether there are any particular tricks to the property set deployment and what the deployent process actually does. Could issues with the target environment prevent correct deployment of the property set?

  • 'Never' auto lock setting not available.

    My iPhone 3G doesn't have 'Never' listed as an option under the Autolock settings. It has 1,2,3,4, and 5 minutes listed, but Never is not there. I'm on software 3.0.1 and hardware model MB702LL. Could there be a setting in another menu that is disabling that option? I'd appreciate any ideas on how to fix this, thanks.

    I just added an email account to my iphone through Microsoft Exchange. I couldn't figure out why on my auto lock I didn't have the "never" setting any longer. Only 1 thru 5 minutes. I searched on here and find out through your posts that it has something to do with the Exchange. I disabled it and sure enough the "never" setting came back. My question is this, Is there a way to have the email account through Microsoft Exchange on and keep the "never" setting in auto lock? Can I override it somehow so to speak? Any help would be greatly appreciated. Thanks.

  • Photostream setting not available

    I am trying to get photostream working. I have an iPhone 4 with iOS 5.1, with iCloud set up. I noticed new photos were not being sent to iPhoto on my Mac, so I checked to be sure photo stream was enabled in iCloud. However, I noticed there was no photostream setting at all on the iPhone (Settings > iCloud). There is also no setting for "Documents & Data"). Any ideas why either of these settings is not there?  I cannot enable photostream on the iPhone without that setting present.
    Thanks in advance.
    LAF

    FYI... I learned why there is no photostream or Documents & Data setting on the iPhone. It is because my employer, who bought the iphone and pays for service, has disabled these functions because of privacy reasons.

  • Help Setting not available in Site Setting

    Hi,
    i'm not able to find the "Help Setting" link in a Site Collection (under Site Setting > Site Collection Administration).
    Thanks
    Daniele
    Daniele

    Custom site collection help allows you to create your own custom help libraries for your users. You can upload documents  and articles related to help for your users after you have activated this feature. To learn about this more, here is an article
    for you which will give you the full idea.
    http://office.microsoft.com/en-us/sharepoint-foundation-help/add-custom-help-to-a-site-collection-HA101833141.aspx
    If you find this information helpful please propose this as an answer and vote.
    Thanks.
    Kind Regards,
    Ujjwal Patel
     |
    SharePoint Online Support Engineer,MCPD,MCTS,MCAD.

  • Iphone device not detected in PC, hence autoplay setting not available

    My iphone is not detected under autoplay, therefore i cannot import/export pictures.. please help!

    Here is a starting point
    http://support.apple.com/kb/TS1538

  • Apn setting not available

    can't change apn setting on the new iOS 8.1.2

    Follow up to my posting above.  The PH setting disappeared again last night after I got home.  I brought it back today in my office after another series of steps 1,3,4,5,6 above.  My theory (other than that something must be wrong with the iOS) is that the coming and going of the PH setting is triggered by the wifi that is it connecting too.  For instance, a change in wifi might be the trigger.  After fixing it in the office yesterday, it worked fine the rest of the day, through the night, until I finally got home then it disappeared again.  Just a thought.

  • Office 2013 and SharePoint 2013 server properties - The required term set is not available.

    Hi,
    After creating new document from ribbon with the new document function on any template the managed metadata based server properties cannot be selected and properties boxes are grayed out. Mouse over displays "The Required term set is not available".
    Works fine when using it form resource (SharePoint) domain both with user domain and resource domain accounts.
    There is a two-way trust btw domains.
    SPNs are done for AppPools.
    AppPool accounts have delegations and are set to impersonate with GPO.
    SharePoint Web Application is on kerberos authentication.
    There is no difference when sites are using user or resource domain AppPool accounts.
    The WFE and SQL Server have computer delegations.
    Server env: Windows Server 2008 R2 with all updates, SQL Server 2008 R2 with all updates, on-prem SharePoint Server 2013 with no CU.
    User env: Windows 7 ENT, IE10 and Office 2013 with all updates.
    There is no internet connection and internet connection is not possible. The internet connection is cheated with two DNS A record setting for
    www.msftncsi.com and dns.msftncsi.com. Also registry changes "ActiveDnsProbeContent" ip- address for Win7 is done via GPO to private IP. This is done because otherwise check-in/check-out does not work.
    Last things on IIS log are:
    2014-01-24 10:38:36 192.168.n.n PROPFIND /TestDoc - 5445 0#.w|userdomain\test3-user 192.168.51.51 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 207 0 0 639
    2014-01-24 10:38:37 192.168.n.m OPTIONS / - 5445 0#.w|userdomain\test3-user 192.168.51.51 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 842
    2014-01-24 10:38:54 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
    2014-01-24 10:39:25 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 0
    2014-01-24 10:39:56 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
    2014-01-24 10:40:27 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
    What I missed.
    Br,
    -timo-

    Same problem here!. Giving the computer network access allows the control to be populated. Then I disabled and restarted and it seems to be ok....

  • I have an iphone 5 with ios 6. I am trying to setup a new exchange email account. I need the backslash but it is not available. I can find it on other apps but not when trying to set up the mail account. (it is not on the  keyboard)

    I have an iphone 4s with ios 6. I am trying to setup a new exchange email account. I need the back slash but it does not show up on the keyboard. I know it is supposed to be on the +key (and is for other apps) but for some reason it is not available when setting up an email account. Is this on purpose or am I doing something wrong?

    I can tell you that with Sprint their coverage area isn't as good as Verizon or AT&T.
    Are you sending these imessage while on wifi or cellular data?  Also your husband would need to be in a good coverage area.
    Usually when imessage is unavailable it will send it as a text.  Does your husband receive your imessage as a text?

  • How can I save a page and all its component parts in a single file, like IE does as an MHT - it's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)

    how can I save a page and all its component parts in a single file, like IE does as an MHT?
    It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
    It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
    I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
    Thanks
    MG

    This is not really an answer just my comments on your question.
    I am sure I recollect efforts being made to get mhtml to work with FF.
    Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
    There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
    You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
    As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
    Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

  • ICloud you have the ability to NOT format phone numbers of contacts; this ability is not available on the contacts of iPhone. If I set-up a phone number in iCloud with NO parenthesis, ex. 123- 456-7899, then this format should be available on the iPhone

    In iCloud you have the ability to NOT format phone numbers of contacts; this ability is not available on the contacts of iPhone. If I set-up a phone number in iCloud with NO parenthesis, ex. 123- 456-7899, then this format should be available on the iPhone contact.

    That is correct is doesn't. Standardized formatting of phone numbers in the iOS app is more important because it supports contact from a variety of locations (gmail, hotmail, etc.). iCloud doesn't (not directly).

  • DC containing UI component of task is not available

    Genereating version ID's for sources...
    Compiling workflow...
      [BpemTask] WARNING: [System.err] [Invoked from  com.sap.bc.krn.perf.PerfTimes.internal_TRC(PerfTimes.java:103)]
      [BpemTask] WARNING: [System.err] PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
    Warning: Deploy time dependency to DC (filein/wd) containing UI component of task (Develop CA) is not available
    Warning: Mapping in AssignT0 does not do any transformations.
    Warning: Mapping in AssignT4 does not do any transformations.
      [BpemTask] [System.out] [Invoked from  com.sap.glx.paradigmInterface.triggernet.assembler.GalaxyAssembler$AssemblerRun.checkNode(GalaxyAssembler.java:706)]
      [BpemTask] [System.out] Here.
      [BpemTask] [System.out] Here.
      [BpemTask] [System.out] Here.
    Transforming Trigger Network into CSV...
      [BpemTask] [System.out] Here.
      [BpemTask] [System.out] Here.
      [BpemTask] [System.out] Here.
    my bpm always has build log like this.
    i have no idea why it( Deploy time dependency to DC (the ui project) containing UI component of task (task name) is not available ) happen.
    maybe it happen because i chenged the web dynpro's context, but is that normal? or how can i fix it?

    Hi Vic,
    Looks that you have defined a Deploy time dependency on some DC and it is not present in your local machine while you are deploying your Process Composer DC. If you are working in a NWDI environment, then you can sync all the dependent DCs to resolve this issue. Else you can also remove the Deploy Time dependency for the DC, but ensure that all the DCs having runtime dependency are available at runtime else it will lead to issues at runtime.
    Hope this helps!!
    Cheers,
    Arafat

  • Delete button not available for goods receipt when PO has GR-Based IV set

    Hi ll,
    the delete button for confirmations is greyed out when the PO has the GR-Based IV set, the return delivery button however is available.
    There are several goods receipt on the PO some of which have linked invoices but the goods receipt I want to cancel is not linked to an invoice.
    I've checked the backend config and it's the same for movement types 102 and 122. Also I can manually post a 102 in the backend.
    For PO's without GR-Based IV both the delete and return delivery buttons are available.
    Does anyone have any ideas? We are on SRM 4.0.
    Cheers
    Chris

    Hi,
    thanks for the response but I don't think this situation is related to backend settings as I can perform a 102 and a 122 against the same PO l;ine directly in R/3.
    This appears to be an SRM "feature".
    To claifry the situation
    PO flagged as GR-Based IV
    Purchase Order line has several goods receipts and several invoice receipts matched.
    Tryning to cancel a confirmation in SRM for a goods receipt without a matched invoice receipt.
    "Delete" button is not available but "Return Delivery" button is available.
    In R/3 backend I can post a 102 (delete) or a 122 (return) without any issues.
    Config settings are the same for 102 and 122 in the R/3 backend.
    Any one any ideas?
    Cheers
    Chris

  • In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?

    In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?

    The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
    To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
    [http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]
    If you prefer, you can also do this by installing the Browse by Name extension - https://addons.mozilla.org/firefox/addon/browse-by-name

  • SLDAccess set to true, but not available

    Hi all,
    I get the following error when Running a Proxy to mail Scenario.
    This happens in the Call adapter pipeline Step of the receiver mail adapter.
    error message "com.sap.engine.interfaces.messaging.api.exception.ConfigException: SLDAccess set to true, but not available"
    I did the Following:
    1.  tried SLDCHECK -
    works fine
    2.  XIAFUSER/PIAFUSER is not locked.
    3.  The SLD is reachable
    4.  XI business system has correct "Pipeline URL" parameter defined
    What could have gone wrong.
    Any help would be appreciated.
    Regards
    Abhishek

    Hi,
    Check the doc and links.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/09cb9ffb-0701-0010-4183-c2e8f405bf9a
    Note 768148 - Using a separate SLD
    Note 720717 - Reduce the number of System Landscape Directories (SLD)
    Note 936318 - Dividing a SLD instance
    Note 935474 - Consolidate SLD instances
    Regards,
    Phani

Maybe you are looking for

  • Upgrade SAP R/3 to ECC 6.0 , Java Stack Upgrade

    Hi Experts We are doing R/3 upgrade to ECC 6.0, we have done technical upgrade,Now we are planning to do Functional Upgrade. like 1. Java Stack 2. Integrated Planning 3.BI Accelarator 4.Data Transfer process 5.Web Reporting Portal 5.New BI content 6.

  • Phone number appearing in Favorites list but does not exist in Contacts

    I have an iPhone 4S, running iOS 5.1.1 (9B206). About two weeks ago (not really sure when I noticed) a phone number appeared at the bottom of my Favorites list. The number is for a person that I deleted from Contacts some months ago. The number is no

  • Views not available in Discoverer Plus

    Hi Gurus, I have created some views using Oracle 10 g Disco Admin v 9.0.4 and I am able to access them from Disco Desktop v 9.0.4 However, when I log in to Discoverer Plus, those views are not available. I am logging with the same user id that I am u

  • Photoshop & Lightroom on iPad photo quality

    I am wondering why went to editing a photo through Photoshop on my iPad, the quality of the photo decreases dramatically? Wondering if I'm doing something wrong. Thanks

  • I am operating with OS X 10.5.8 and need to upgrade to 10.6.4 any thoughts on how?

    I just bought the Magic Trackpad, however OS X10.6.4 is required and I am running 10.5.8. I keep clicking on Software update but there aren't any updates. Any thoughts on how I can upgrade would be greatly appreciated.