Attribute Editor: Alarm Tab Not Available

Hi,
We have installed Sun Manager Center 4.0 with Addon v 5.
When we select, <server object> -> Operating System -> Kernel Reader -> System Load Statistics -> Load Average Over Last 5 Minutes, in the console, the "attribute button" becomes unavailable.
Does any body know why this would be?
In other installations the " attribute button" is active. When selected the alarm tab becomes available.
Why is our installation different?
Thanks,
Gilbert

This has been sorted.
Thanks

Similar Messages

Grid Control performance tab not available when on the target home of ASM

I noticed recently that the "Performance" tab/link is not available when you are using 10g Grid Control and you are on the home page of an ASM instance. Can this be explained?

Hi MarGur
I try to help you. The OEM Grid Control in some times not discover the Oracle 9i databases and you must to add manually.
First, check in your target machine that the user owner of agent software have rights of read and write in the ORACLE_HOME directories of Oracle 9i databases.
Go to Grid Control Console
Select Targets ---> Databases
Press Add --> Select the host ebisdb2.oneshield.com and press continue
The automatic discover process begin. When finished is very normal that nor discover the Oracle 9i databases. You press the Add manually button
in the page that appear you must entry all the configuration information of database:
ORACLE_HOME directory
DBSNMP USER
DBSNMP PASSWORD
HOSTNAME
PORT
SID
Check that the dbsnmp user in your database is unlock and press the TEST button to verify the connection work fine.
After this many windows appear of configuration process, and you will put the sys password and host credentials.
If you have problems, tell me
Regards

Planning Availability Times tab not available

Dear All,
Greetings!
We have a SAP NW 04s system with PI 7.0 SP 11, we are trying to do some actions in the Planning Availability Times tab at the Communication Channel Monitoring in Runtime Workbench.
But the Planning Availability Times tab is not available when I choose any of the Communication Channels, I am able to view only the Cluster Node and Administration Tabs in the browser screen.
Kindly let me know whether any configurations needs to be activated for the tab
(or)
Any special authorizations to the user
(or)
Is the feature available only from SP12, as I searched few OSS notes for Planning Availability Times and found that the corrections or changes refering to SP 12 and above for WAS 7.00.
Currently we are on the below mentioned SP's,
SAP_ABA                     700                     0011
SAP_BASIS     700                     0011
PI_BASIS                     2005_1_700     0011
SAP_BW                     700                     0010
Kindly help me in solving the issue.
Thank you
Regards,
Vineeth
SAP BASIS

Hello Vineet
I am not sure exactly when this functionality was released (SP11 or SP12). I think it may be available in the latest SP11 patches (XIAFC, XIAF and XITOOLS). You would need to be on the latest patches to ensure you can use the functionality. If you still don't see the button then it will be necessary to go to SP12.
Regarding configuration etc, see the link below.
Planning Availability Times
http://help.sap.com/saphelp_nw70/helpdata/EN/45/e3c488f87c6f74e10000000a1553f6/frameset.htm
Regards
Mark

ISE 1.2 IETF Attribute 88 Framed-Pool not available

Using ISE 1.2 and setting up a new Radius Server Sequence, I am unable to use IETF Radius attribute 88 (Framed-Pool) as it is not displayed in the Radius IETF Dictionary.
Is there a reason for this? Most other IETF attributes are available, I am curious as to why this one is missing
Thanks

Can you please provide me the output of "show version" from ISE CLI.
Regards,
Jatin Katyal
** Do rate helpful posts**

HP webservices tab not available when using HP Jetdirect 2700w wireless print server

I recently bought HP Laserjet Enterprise 500 m551 dn color laser printer with HP jetdirect 2700w wireless print server ( one day old at this time).
I was able to configure the device and enable/ use eprint services using the embedded server with a wired connection.
However when I attach a the mentioned wireless print server, the "Webservices" tab disappears from the configuration website, the printer reports that the eprint services are not enabled and ofcourse hp eprint or google cloud print do not work. The printer appears offline at eprintcenter. Everything else works fine.
On the product website for the wireless server, it clearly states that this is compatible with eprint services.
What am I doing wrong.
Arjun
HP Laserjet Enterprise 500 m551 dn color laser
HP Jetdirect 2700 w wireless print server
Win 7 Ultimate x 64
Netgear WNDR 4500

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Jetdirect board here:
http://h30499.www3.hp.com/t5/Print-Servers-Network-Storage/bd-p/bsc-254
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Account assignment tab not available in ME51N

hello,
can any one replay in purchase requisition account assignment tab is not there
pls let me know how i have to configure it.
rk

Hi,
It could be an authorization issue then. Can you please check in the IMG the following menu path:
IMG
Materials Management -> Purchasing -> Purchase Requisition ->
Set Up Authorization Check for G/L Accounts.
Materials Management -> Purchasing -> Purchase Order ->
Set Up Authorization Check for G/L Accounts.
Documentation IMG:
"Set Up Authorization Check for G/L Accounts
In this step, you set up the authorization check for G/L accounts in the
case of purchase requisitions.
You can determine whether or not the authorization check is to be active
for each company code.
If the check is active, each time a G/L account is entered in a purchase
requisition, the system checks whether the user has the posting"
Please check whether the authorisation group in the account code
(transaction FS02, the field is on the 'Control data' tab, technical
name is BEGRU) is setup.
When a account assigned purchase requisition is created, the system
checks for object F_BKPF_BES with values from the BEGRU and activity 01.
This controls users to enter an account assignment when they
create a purchase requisition.
I hope it helps.
Regards,
Edit

Extended tab not available for Characteristics property in pla queries..

Hello All
I am implementing BI IP and i am experiencing a strange problem which i never encountered before. When i am creating an input ready query I am unable to view the extend tab where we select the access type for each characteristics for any info object. But i can see the planning tab for the Query as whole and i am able to save data in the cube from this sample query. I am also unable to view the options Transfer values and Save Values in the context menu when i execute the query.
Please help me asap.
Regards
Harsh

Hi all
I have solved the problem for calendar months but not for calday.
For months, I have modified 0calmonth infoobject and flag "With texts" in the "Master data/texts" tab. I dind't have to load any texts for months and I could use the "Display as text" option in the queries and texts were displayed correctly in the reports.
For calendar day, I couldn't use this solution nor for 0DATE infoobject.
Regards
Inma

Admin tab not available on the BI publisher

I have installed OBIEE , to get a practice on BI Publisher. I launch BI Publisher with the user / password (Administrator/Administrator) . I am getting BI Publisher screen without admin tab. Please help me how can i get Admin tab.
I could have upload the screen shot, but dont know how to do it .

Hi,
Modify the file xmlp-server-config.xml in \OracleBI\xmlp\XMLP\Admin\Configuration with the following contents and check.
<property name="SUPERUSER_PASSWORD" value="Give Some Password"/>
<property name="SUPERUSER_USERNAME" value="Admin"/>
<property name="SECURITY_MODEL" value="XDO"/>
Restart OC4J and log in either with Administrator or the Admin id created above.
I hope this will work
Regards
Raj

Publisher Admin tab not available

I'm trying to setup the BI publisher.
When I access the publisher, I can't see the Admin tab. I can't create any report. Basically, I can't do anything.
I have already allow the access to the publishser to Everyone.
Anything that I need to do to enable the publisher to work?

Hello,
is the version of OBIEE that you're using 10.1.3.3.0?
I have this problem when I'm using this version. When I upgrade to a higher version this problem didn't happen again.
If you couldn't upgrade your version try to execute the cryptotools utility.
Also, check if the 'xmlp-server-config.xml' file (at $OracleHome\OracleBI\xmlp\XMLP\Admin\Configuration) has the entry <property name="SAW_USERNAME" value="Administrator"/>

Why Conditions tab Not available in STO ?

Hi All,
In one system I see Conditions tab for STO in both header level and item detail level, but in another client I don't see the Conditions tabs........Why is this? How do I enable the Condition Tabs?
Thanks in advance

Hi Duke
GOTO SPRO->Materials Management->Purchasing->Conditions->Define Price Determination process->Define Schema Determination Process->Determine Schema for Stock Transport Orders
Select New entries enter the schema group, documentype for STO and Price determination procedure.
Hope this works.
Regards
Jagadish

Skype to Go tab not available for me. (I have a su...

I am not sure what is going on. I've used Skype in the past. I had canceled my subscription a while back but renewed the subscription today. After getting a plan I went to my "dashboard" and the usual "Skype to Go" icon is not there. I am not able to follow any link from the FAQ into the skype to go page in order to set it up. I have a subscription and I have credit on the account. Anybody know what could be going on. I have already logged out and back in to my account through the web interface with no luck.
Any help would be appreciated.
Thanks.

Veritas wrote:
I had canceled my subscription a while back
Hello,
Subscription to which service?
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

RSAT and the missing Attribute Editor tab [solution]

PROBLEM
When you install RSAT on a Vista workstation or Server 2008 system, that is managing a 2000/2003 based forest, you do not see the Attribute Editor tab when looking at the properties of a User or Computer object in Active Directory Users and Computers(ADUC).
MORE INFORMATION
The Display Specifier is not updated in the Configuration Naming context, because the 2008 schema changes have not been executed on the forest. Part of the upgrade updates the forest Display Specifiers. The Attribute Editor tab actually uses functions within the ADSIEDIT tool , more specifically the ADSIEDIT.DLL extension. Although the DLL is probably registered on the RSAT system, the ConfigNC need updating, in order to expose the tab in the ADUC interface.
SOLUTION
Use the ADSIEDIT tool (or other tool of choice...ADexplorer, LDP etc), with a user who has rights to modify the Configuration Naming Context.
Navigate to cn=<languagepage>, cn=configuration, dc=<domainname>
(where <languagepage> is your relevant language...see http://support.microsoft.com/kb/324097)
(where <domainname> is your domain dn)
Under the cn=User-Display object, edit AdminPropertyPages and add the line 11,{c7436f12-a27f-4cab-aaca-2bd27ed1b773}
Under the cn=Computer-Display object, edit AdminPropertyPages and add the line 12,{c7436f12-a27f-4cab-aaca-2bd27ed1b773}
Under the cn=Default-Display object, edit AdminPropertyPages and add the line 4,{c7436f12-a27f-4cab-aaca-2bd27ed1b773}
Open ADUC from the Vista or Server 2008 and you should now see the Attribute Editor for the object you selected. Note: Attribute editor is only shown when ADUC is in Advanced View.
-Stuart Hudman

Never mind, i got it.... the prefix number is irrelevant as long as it is in sequential order... to be able to see the attribute editor tab for groups i just
Under the cn=group-Display object,
edit AdminPropertyPages and
add the line 5,{c7436f12-a27f-4cab-aaca-2bd27ed1b773}
the first number (5,) was my next available number.
FYI: English is 409. the actual DN would be cn=409,
cn=DisplaySpecifiers, cn=configuration, dc=<domainname>

Custom Attribute not available in Available Fields section of Configuration

Hi Experts,
My requirement is to add a custom search field in contact search screen. For that i tried various options
Option1
Added a model attribute in component/view BP_CONT SEARCH/Search. The attribute got successfully added. But when i opened the Configuration tab, i could not see the attribute in the available fields.
Option 2
In the view CRMVC_SDESIGN, i created a new entry for my attribute in object type: BP_CONTACT and design object . But doing so, i got an error and was not able to add my attribute
Option3
Since the View context node 'Search' is bound to the Component Controller Context node 'Search'. I created my custom attribute in compoennt controller also. But this also did not help.
Option 4
I deleted the enhancement of the view and created a new enhancement. I created a value node in Search context node. But still the attribute is not available in the Availble Fields in the Configuration of component/view BP_CONT_SEARCH/SEARCH.
Kindly provide your valuable suggestions to resolve this issue.
Regards,
Radhika
Edited by: Radhika Chuttani on Jan 6, 2012 7:28 AM

Hi Radhika,
You need to enhance the search query structure as well in order to get the field in the configuration.
You can find the BOL structure for the corresponding context node bol model.
In your case, the BOL model is the search object 'BuilContactAdvancedSearch'.
The corresponding structure can be found at the BOL Model Browser, under Dynamic Query Objects
for the search object 'BuilContactAdvancedSearch'. The corresponding structure 'CRMT_BUPA_IL_CONP_SEARCH'
has to be enhanced with the new custom attribute. Only then, this field would be available in the configuration
when the following htm code gets executed when you open the configuration tab.
<thtmlb:advancedSearch id                = "advs0"
                                 fieldMetadata     = "<%= controller->GET_DQUERY_DEFINITIONS( ) %>"
                                 header            = "<%= SEARCH->get_param_struct_name( ) %>"
                                 fieldNames        = "<%= controller->GET_POSSIBLE_FIELDS( ) %>"
                                 values            = "//SEARCH/PARAMETERS"
                                 maxHits           = "//SEARCH/MAX_HITS"
                                 ajaxDeltaHandling = "false"
                                 onEnter           = "search" />
Here you can see that, it reads the parameter structure using the method SEARCH->get_param_struct_name( ) of
the context node.This is used for configuration as well.
Also if you have an F4 help for your custom attribute, you have to add it in the GET_DQUERY_DEFINITIONS( ) of the
view controller. These additional information will help you to understand better.
Regards
Leon
[SAP Community Network Forums on mobile|https://cw.sdn.sap.com/cw/ideas/7910]

Windows 2003 Active Directory Attribute Editor Tab

My Active Directory does not have an Attribute Editor Tab....how do I add it?

My Active Directory does not have an Attribute Editor Tab....how do I add it?
Bradheld is correct, attribute editor tab was introduced in windows 2008. To view the attribute editor tab from vista/windows 2008 & above for 2000/2003 forest, refer below article.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/6e6ef6bd-b5c9-4f16-b346-097832e3b93c/rsat-and-the-missing-attribute-editor-tab-solution?forum=winserverManagement
Awinish Vishwakarma - MVP
My Blog: awinish.wordpress.com
Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights.

I am trying to create mp3 version of itune songs. I have gone through the preference sequence to be mp3 encoder but this is not having any effect. I have also tired from file tab to create a version but this is not available to action

I am trying to create mp3 version of itune songs. I have gone through the preference sequence to be mp3 encoder but this is not having any effect. I have also tired from file tab to create a version but this is not available to action showing as lite grey.
Any help would be appreciated

I am trying to create mp3 version of itune songs. I have gone through the preference sequence to be mp3 encoder but this is not having any effect. I have also tired from file tab to create a version but this is not available to action showing as lite grey.
Any help would be appreciated

Attribute Editor: Alarm Tab Not Available

Similar Messages

Maybe you are looking for