Attribute for user contains errors. Inform system admin

Hello,
We've got an issue with shopping carts created by a user that was deleted from system. When trying to see in Monitoring Shopping Carts header or item details of a given sc. A web error occurs:
The URL http://srp.srm.gruposalinas.com.mx:8000/sap/bc/gui/sap/its/bbpsc11/! was not called due to an error.
Note
The following error text was processed in the system SRP : Attribute for user contains errors. Inform system admin.
The error occurred on the application server srm-pro_SRP_00 and in the work process 2 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
We've cheked SAP NOTE 312058-BBPPU99: Error: Attribute for ... is missing. Inform ...
But it seems that none of the information applies to us, since this issue is only present for Shopping carts that were created by this deleted user.
So we tried to re-assing one of this sc, chaning PARTNER_NO,ADDR_NR
ADDR NP data in table CRMD_PARTNER according to a new given user, but it didn't work. So we need to know how to re-assing this sc or perhaps how to find what specific attribute is missing.
Any advice is welcome.
Thanks in advance.

Hi
Which SRM version are you using ? This is an SRM error message.
The manager role should be enough to change user attribute. The transaction is BBPATTRMAINT. Employee role should have BBPUM02 or BBPAT05 to change their own attribute.
Please check whether the User ID you are using to Log into BBP_PD (and seems to be assigned in the org structure also)is consistent and has no errors in tcode USERS_GEN. You should check the user, it's not set up properly in USERS_GEN Transaction, Else repair the user.
To maintain the user attributes you must have the Administrator role.. Your user should have role SAP_BBP-STAL_ADMINISTRATOR and be integrated in the org structure. your user must be integrated in SRM organizational structure. To see which attributes are missing, you can click on the user in PPOMA_BBP to see details, and go to last tab "Check". This will list all required attributes depending on used scenarios (so you may not require all of them). You can also use transaction BBP_ATTR_CHECK to check user's attributes for a particular scenario.
Please go through the following links as well ->
bbp_mon_sc attributes
Re: FM for attribute's value assignation in PPOMA ?
Note 751022 - Monitor Shopping Cart: Item deletion causes termination
Re: User Settings are not saved
Re: Not able to generate user users_gen
Re: SRM organization plan...
Re: User creation error
Hope this will definitely help. Do let me know.
Regards
- Atul

Similar Messages

Acct assignment cat. of item not in user data; Inform system admin

Hi all,
We are on a SRM EBP 5.0 project and we are getting the following error when we try to create a purchase order from the purchasers login.
"Acct assignment cat. of item not in user data; Inform system admin"
The complete details of the screen shot are as follows:
The following error text was processed in the system DS1 : Acct assignment cat. of item not in user data; Inform system admin.
The error occurred on the application server lndnysap1_DS1_01 and in the work process 0 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: ABORT_PO of program SAPLBBP_PO_UI_ITS
Form: ADD_TO_MSG_LOG of program SAPLBBP_PO_UI_ITS
Form: ADD_TO_MSG_LOG_MULTI of program SAPLBBP_PO_UI_ITS
Form: SET_PRICING of program SAPLBBP_PO_UI_ITS
Form: DETERMINE_EXTERNAL_SCREEN of program SAPLBBP_PO_UI_ITS
Module: DETERMINE_EXTERNAL_SCREEN of program SAPLBBP_PO_UI_ITS
We did the following steps :
Created shopping cart- employer and WF triggered apprd. by manager.
Purchaser did "Carry Out Sourcing ", and if we say "Create Purchase Order", the PO gets created with a information message that "Incomplete purchase order 11/1 is created "
When we go to "Process Purchase Order" for the completion of the same. If we see Follow-on documents "Purchase Order Held" occurs.
In the tab Item Data details Pricing tab we get this error.
Do any of the SRM gurus can suggest us what to do?
In our admin logon it shows
"Server for pricing is not running. Start Server" occurs after every run of this process purchase order from the purchasers login, though our IPC is working fine.
Will be of great help if somebody replies soon.
Sincerely,
Sridhar.

Hi,
IPC has to be configured.
Please check the following threads :
https://forums.sdn.sap.com/click.jspa?searchID=211089&messageID=2714527
https://forums.sdn.sap.com/click.jspa?searchID=211089&messageID=2715019
Kind regards,
Yann

Error while reading the PO in the Backend system. Inform system admin

Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
Teja

I am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna

Error - The attributes for user could not be determined

When I login as a Buyer (with role ZTSX_EC_BBP_PURCHASER - copy of SAP_EC_BBP_PURCHASER), I get the foll. error while trying to Process Purchase Orders:
The attributes for user could not be determined
It does not happen on other transactions (like Sourcing or Issue POs).
The buyer is in the org. plan and I have checked the attributes and they seem ok.
What could be the issue ???
Thanks
-Bakulesh

Hi
Please go through these links ->
The attributes for user could not be determined --
'Error in writing attributes' when using function tab
Company code for system missing in user attributes
BBP_POC not working in SRM 5.0
Re: urgent: regarding ATTRIBUTES
Regards
- Atul

Backend checks could not be performed. Inform system admin

Hello SAP Experts,
We have encountered the error Backend checks could not be performed. Inform system admin in a lot of POs in SRM. We are using SRM 7 and SP12.
Before the error occured, the WBS elements were not maintained in SRM but the POs were created since our SHC has automatic approval.
Currently, the WBS elements are now in SRM but the POs are stucked with the error Backend checks could not be performed. Inform system admin.
We have informed the Basis team if there are any issues in the RFC connections but there is no error.
The only POs affected were the ones wherein the WBS element was not maintained before but is now maintained in SRM.
Regards,
Romeo

Hi Chandra,
Please check the Purchasing Organization and Purchasing Group in PO if they are not populated then this error is triggered. Please also check the user settings whether Purchasing organization information is maintained or not.
Regards,
Ravi G

The Organizational Data could not be determined. Inform system admin

Hello All,
I am able approve PO from EBP, but getting this error 'The Organizational Data could not be determined. Inform system admin' when trying to appove PO from Universal Work List (portal) or when I try to open the work item via Busines Workplace (SAP GUI). Can anybody tell me if there is any config missing? or any suggestions to resolve this issue.
Any kind of help appreciated and rewarded.
Thanks,
Shekar

Hi Chandra,
Please check the Purchasing Organization and Purchasing Group in PO if they are not populated then this error is triggered. Please also check the user settings whether Purchasing organization information is maintained or not.
Regards,
Ravi G

System Lock error : Inform System administrator

Dear all,
One of the SAP user got this (System Lock error : Inform System administrator) error , while doing posting .
Kindly advise

Hi,
Check for any lock entries in the TA SM12 and then have a look at the note 13907 System error in the block handler, overflow lock table.
Hope this helps.
_Varadhu...

The attributes for user could not be determined --

Hi,
Our is extended classic scenario:srm5.0 & ECC6.0
we are getting the following error in the org plan:
"The attributes for user could not be determined "
The error is occuring , when we log into the web browser.
we also have a error in the org plan, under the user at the check tab,"No attribute found for scenario BBP".
when we run the BBP_ATTR_CHECK & BBP_BP_OM_Integrate, we have no errors...
Thanks in advance,
RK.

Hi All,
Thanks for your support...
I check the T-code:BBP_ATTR_CHECK & BBP_BP_OM_INTEGRATE.
I also checked the attributes for the CP are ok,still i had the error appearing in the WEB.
The solution:
The CP has been deleted from the org plan.
Once again,we generated the users from USERS_GEN and assign CP to the org plan again at the same.Now the Attributes error is gone.... and the issue is resolved.
Thanks and Regards,
RK.

Call of API for IBase contains errors

Dear All,
We are using solution manager 4 with SP13.When i try to create a Ibase through Initiate Data transfer for ibase,i gives the following error.
Call of API for IBase contains errors
Message no. CRM_IB050
Diagnosis
No import data was entered for one of the function modules (APIs) for Installed Base Management. Therefore, the function cannot be executed.
System Response
The system terminates processing.
Procedure
If the APIs are called in customer-specific programs, check the call for the APIs and change the call accordingly.
Please help to proceed,
Regards,
Avinash.

Good day,
Had the same error and solved it by doing the following;
Go to t/code DNO_CUST01 and double click on SFL1 and make sure "number range" is 01 and "action profile" is SLFN0001_STANDARD_DNO.
Your number range interval in t/code CRMC_NR_RA_SERVICE should be consistant with NR details in t/code DNO_NOTIF (check note: 498984 to set it up)
Good luck.
Cheers
Anthony Cunha

Call of API for IBase contains errors Message no. CRM_IB050

Call of API for IBase contains errors
Message no. CRM_IB050
Diagnosis
No import data was entered for one of the function modules (APIs) for Installed Base Management. Therefore, the function cannot be executed.
System Response
The system terminates processing.
Procedure
If the APIs are called in customer-specific programs, check the call for the APIs and change the call accordingly.
Can anyone help me in the above issue.
Regards,
Mirza Kaleemulla Baig

Hi Sai,
This is too late to reply this post, but to let everyone know about the issue I am posting here.
Start new UI session and put breakpoint at BUPR_EMPLO_DELETE and check parameter IV_X_SAVE everytime, till you get the error message. The parameter IV_X_SAVE should be same/consistent (either ' ' or 'X') in whole Logical Unit of Work. It should not change in between.
I faced the same kind of problem and found that standard was passing IV_X_SAVE = ' ' and in our custom code we were passing IV_X_SAVE = 'X'. I changed it to IV_X_SAVE = ' ' and my problem got resolved.
You can try the same. Please post the alternate solution if you find it.
Best Regards,
Rahul Koshti

Is there a range of error codes reserved for user defined error codes?

I would like to create my own error codes for a CVI dll but I want to make sure I don't use error codes already defined for something else. Is there a range reserved for such use?
Samee thing for warnings (errorcode > 0)
Thanks

I have never found a positive mention of a "safe" range of error codes available for user-defined error conditions, but I can suggest you some source of informations.
First of all, every library has its specific list of error codes, usually listed in the relative include file. All these error codes are listed in the online help too (search for "error codes" in the index tab of the help).
Second, GetGeneralErrorString () is a function that can be used to trap errors of the following libraries with a unique error function:
User Interface Library
Easy I/O instrument driver
Toolbox instrument driver
ActiveX Library
DIAdem Connectivity Library
.NET Library
DataSocket instrument driver
Network Variable Library
Real-Time Utility Library
TDM Streaming Library
UDP Support Library
This means that the error codes from this libraries do not overlap, so you could derive from its code some ranges not used by these libraries.
Nevertheless, there is not a single function for error trapping: every library has its proper list of error codes and a function to decode them in human readable form, andthere is no guarantee that these ranges does not overlap. It's up to you to trap errors from every function in the proper way.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

FBRA: System lock error inform system administrator

While trying to reset a document transaction code FBRA, am getting the error message "System lock error inform your system administrator" when I hit the save button.
how do i solve this?
You help is much obliged.
ogutu

Dear Ogutu,
the F5288 error message (System lock error: inform system Administrator)
appears to be caused by a table overflow as it takes place with a very
large document ie. xxxx line items. As all the items must be locked when
transaction FBRA is performed, there is not enough space in the lock
table.
Please extend the profile-parameter "enque/table_size", as per note
13907, 487347 which I have attached, in order to overcome this problem.
You have to change a parameter.
Then please remember to restart the server after extend the
profile-parameter "enque/table_size", as per note note 13907.
If you already did it and nothing changed, please increase the parameter
again.
Please be aware that You have also to implement the solution described
in note 487347. There is not only correction code, there is also some
steps to do in order to solve the incident (manual changes have to be
done in SE93):
1. Implement the corrections. The corrections are not contained in the
     SAP Standard System. See Note 170183.
2. Use Transaction SE93 to create the parameter transaction FBRA_LOAC
     referring to transaction FBRA. In addition to the descriptive text
     'Reset Cleared Items with Account Block', you have to enter the
     value FBRA in the 'Transaction' field.
3. In problematic cases, use transaction FBRA_LOAC to reset cleared
     items. The transaction is not designed to replace the existing
     transaction FBRA. The transaction only provides the option to reset
     cleared items in case of an overflow of the lock table.
I hope this helps.
Mauri

Add a new attribute for user provisioining on SAP R3

Hi,
I want to add a new attribute for user provisioining on SAP R3.
- I have added new attribute in Process form and Resource form
- I think i need to add this attribute in lookup definition of SAP attributes also need to do mapping
but i am not finding lookup definition of SAP attributes .
What will be name of lookup definition of SAP attributes? (In case of AD, we have AtMap.AD).
Can any body please help me?
Thanks

Hi,
You cannot add custom fields and do provision or recon for it.I have opened the SR with Oracle and this facility will be available in 9.1. which is launching after 4 months.You need to request the source code and modify it to get the custom fields.
Thanks

Address for person contains error: email address missing

Hi,
I have included a position in the existing organization structure. A central person assigned to this position . In check tap page , it shows error "address for person contains error: email address missing"
Could anybody help to solve this
Tnanks

Hi,
You can try with BBP_BP_OM_INTEGRATE transaction.
Hope this helps.
Regards,
Vikas

User mapping error: NO systems available for the selected principal

I have a problem related to User mapping. After creating system alias, I mapped my j2ee_admin user successfully. Then I created 15 more users and when I click usermapping for all of them, it is not displaying the system alias. It is giving error "There are no systems available for user mapping for the selected principal"
I cannot understand that when I click connection test, it is successful. The user mapping for j2ee_admin user is working. But when I try to do the same for other users, it is not displaying the system alias and giving me the above error.
Can anybody guide me through the error. I have given "Everyone" role to all the 15 users. Any kind of help will be appreciated and points will be rewarded.

Hello Abdul,
This is a permission problem. Open the permission editor of the system and assign any role/group in the permission editor and select the checkbox corresponding to end-user.
Now assign this role/group to all the users.
It will solve ur problem.
Regards
Deb
[Reward Points for helpful answers]

Attribute for user contains errors. Inform system admin

Similar Messages

Maybe you are looking for