Call of API for IBase contains errors

Dear All,
We are using solution manager 4 with SP13.When i try to create a Ibase through Initiate Data transfer for ibase,i gives the following error.
Call of API for IBase contains errors
Message no. CRM_IB050
Diagnosis
No import data was entered for one of the function modules (APIs) for Installed Base Management. Therefore, the function cannot be executed.
System Response
The system terminates processing.
Procedure
If the APIs are called in customer-specific programs, check the call for the APIs and change the call accordingly.
Please help to proceed,
Regards,
Avinash.

Good day,
Had the same error and solved it by doing the following;
Go to t/code DNO_CUST01 and double click on SFL1 and make sure "number range" is 01 and "action profile" is SLFN0001_STANDARD_DNO.
Your number range interval in t/code CRMC_NR_RA_SERVICE should be consistant with NR details in t/code DNO_NOTIF (check note: 498984 to set it up)
Good luck.
Cheers
Anthony Cunha

Similar Messages

Call of API for IBase contains errors Message no. CRM_IB050

Call of API for IBase contains errors
Message no. CRM_IB050
Diagnosis
No import data was entered for one of the function modules (APIs) for Installed Base Management. Therefore, the function cannot be executed.
System Response
The system terminates processing.
Procedure
If the APIs are called in customer-specific programs, check the call for the APIs and change the call accordingly.
Can anyone help me in the above issue.
Regards,
Mirza Kaleemulla Baig

Hi Sai,
This is too late to reply this post, but to let everyone know about the issue I am posting here.
Start new UI session and put breakpoint at BUPR_EMPLO_DELETE and check parameter IV_X_SAVE everytime, till you get the error message. The parameter IV_X_SAVE should be same/consistent (either ' ' or 'X') in whole Logical Unit of Work. It should not change in between.
I faced the same kind of problem and found that standard was passing IV_X_SAVE = ' ' and in our custom code we were passing IV_X_SAVE = 'X'. I changed it to IV_X_SAVE = ' ' and my problem got resolved.
You can try the same. Please post the alternate solution if you find it.
Best Regards,
Rahul Koshti

Attribute for user contains errors. Inform system admin

Hello,
We've got an issue with shopping carts created by a user that was deleted from system. When trying to see in Monitoring Shopping Carts header or item details of a given sc. A web error occurs:
The URL http://srp.srm.gruposalinas.com.mx:8000/sap/bc/gui/sap/its/bbpsc11/! was not called due to an error.
Note
The following error text was processed in the system SRP : Attribute for user contains errors. Inform system admin.
The error occurred on the application server srm-pro_SRP_00 and in the work process 2 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
We've cheked SAP NOTE 312058-BBPPU99: Error: Attribute for ... is missing. Inform ...
But it seems that none of the information applies to us, since this issue is only present for Shopping carts that were created by this deleted user.
So we tried to re-assing one of this sc, chaning PARTNER_NO,ADDR_NR
ADDR NP data in table CRMD_PARTNER according to a new given user, but it didn't work. So we need to know how to re-assing this sc or perhaps how to find what specific attribute is missing.
Any advice is welcome.
Thanks in advance.

Hi
Which SRM version are you using ? This is an SRM error message.
The manager role should be enough to change user attribute. The transaction is BBPATTRMAINT. Employee role should have BBPUM02 or BBPAT05 to change their own attribute.
Please check whether the User ID you are using to Log into BBP_PD (and seems to be assigned in the org structure also)is consistent and has no errors in tcode USERS_GEN. You should check the user, it's not set up properly in USERS_GEN Transaction, Else repair the user.
To maintain the user attributes you must have the Administrator role.. Your user should have role SAP_BBP-STAL_ADMINISTRATOR and be integrated in the org structure. your user must be integrated in SRM organizational structure. To see which attributes are missing, you can click on the user in PPOMA_BBP to see details, and go to last tab "Check". This will list all required attributes depending on used scenarios (so you may not require all of them). You can also use transaction BBP_ATTR_CHECK to check user's attributes for a particular scenario.
Please go through the following links as well ->
bbp_mon_sc attributes
Re: FM for attribute's value assignation in PPOMA ?
Note 751022 - Monitor Shopping Cart: Item deletion causes termination
Re: User Settings are not saved
Re: Not able to generate user users_gen
Re: SRM organization plan...
Re: User creation error
Hope this will definitely help. Do let me know.
Regards
- Atul

Address for person contains error: email address missing

Hi,
I have included a position in the existing organization structure. A central person assigned to this position . In check tap page , it shows error "address for person contains error: email address missing"
Could anybody help to solve this
Tnanks

Hi,
You can try with BBP_BP_OM_INTEGRATE transaction.
Hope this helps.
Regards,
Vikas

Exception happened when calling deliver API for BI Publisher Bursting

Hi All,
I have developed a BI Publisher report on OBIEE standalone instance (Oracle Business Intelligence 11.1.1.5.0).
I am able to generate the report and burst the output to emails successfully.
But when I tried to burst the output directly to the printer or to save the output FILEs to local machine, am getting the below error/exception.
For PRINT type...error is below
Document delivery failed
[INSTANCE_ID=bisrv.oracleads.com.1305914111196] [DELIVERY_ID=1182]Error deliver document to printer::Exception happened when calling deliver API::Error deliver document to printer::Exception happened when calling deliver API::oracle.xdo.delivery.DeliveryException: oracle.xdo.delivery.DeliveryException: java.net.UnknownHostException: blr-ibc-7a-prn1 oracle.xdo.service.delivery.DeliveryException: oracle.xdo.delivery.DeliveryException: oracle.xdo.delivery.DeliveryException
for FILE type.... error is below
Document delivery failed
[INSTANCE_ID=bisrv.oracleads.com.1305914111196] [DELIVERY_ID=1192]Error deliver document to file::FILE=[D:\Harish:9930609876-10001969343.pdf::Exception happened when calling deliver API::FILE=[D:\Harish:9930609876-10001969343.pdf::Exception happened when deliver to file:: FILE_NAME= D:\Harish/9930609876-10001969343.pdf] ::oracle.xdo.delivery.DeliveryException: java.io.FileNotFoundException: D:\Harish/9930609876-10001969343.pdf (No such file or directory)oracle.xdo.ser
Can anyone please help on this?
Thanks,
Harish

Hi Varma,
thanks for the reply.
Here are the below sql scripts I used.
-- Printer
SELECT BILL_NUMBER      KEY,
'Layout'           TEMPLATE,
'en-US'                     LOCALE,
'PDF'                          OUTPUT_FORMAT,
'PRINT'                     DEL_CHANNEL,
BILL_NUMBER                OUTPUT_NAME,
'true'                          SAVE_OUTPUT,
'Direct Printers'           PARAMETER1,
'LocalPrinter'               PARAMETER2,
1                               PARAMETER3,
'd_single_sided'           PARAMETER4,
'default'                     PARAMETER5
FROM XXXX_BILL_TAB;
-- File
SELECT BILL_NUMBER           KEY,
'VLayout'           TEMPLATE,
'RTF'               TEMPLATE_FORMAT,
'en-US'           LOCALE,
'PDF'           OUTPUT_FORMAT,
'FILE'           DEL_CHANNEL,
'true'           SAVE_OUTPUT,
'Monthly Bill for ' || MOBILE_NUMBER OUTPUT_NAME,
'D:\Harish'      PARAMETER1,
MOBILE_NUMBER||'-'||BILL_NUMBER     PARAMETER2
FROM XXXX_BILL_TAB;
Thanks,
Harish
Edited by: 899863 on Dec 16, 2011 4:01 AM

Calling multiple API for AP invoices

Hi I want to invoke the AP_INVOICES_INTERFACES AND AP_INVOICES_LINES_INTERFACE from bpel. I have coded the transformation for the header part that is ap_invoices_interfaces and have sucessfully invoked it. Now how to invoke the ap_invoices_lines_interface should i have another transformation and another invoke to call the api.

If values for one or more input parameters of the second API come from output parameters of the first API, then you'll need a transformation to map those values. If all of the values for input parameters of the second API come from somewhere else then an assign activity will be sufficient. You will need another invoke to invoke the second API, regardless of whether there is or is not a transform or assign.

Java API for Error Handling

There are some common error tables storing error IDs information ( IDs like error type, project id, interface id, message id etc.) in Operational Database (is not on source or target system) which we have to update using java API. We need to call java API (java code) whenever error occurs. We have to provide all the IDs to this function and then API will take care of DB updating. We can call java API in mapping program by creating user-defined java function, this will trap all the errors which are in source file as well as in mapping and mapping lookup. Query is:
A- A- Do we have any other place after the mapping to call this java API and trap the errors through it?
B- Can we call Java API using BPM and pass error IDs to it.

Hi Anand,
You Have to write Module For that(if you wanna call Java API after Mapping)at the receiver.
To write Module Here is a link which will help you in.....
==>http://help.sap.com/saphelp_nw04s/helpdata/en/84/2e3842cd38f83ae10000000a1550b0/frameset.htm
==>http://help.sap.com/saphelp_nw04s/helpdata/en/e4/6019419efeef6fe10000000a1550b0/frameset.htm
==>http://help.sap.com/saphelp_nw04s/helpdata/en/f4/0a1640a991c742e10000000a1550b0/frameset.htm
Enjoy Coding....:)
Regards,
Sundararamaprasad.

Adobe Save for Web AI Error

Hello everyone,
in our company, we wrote an program to export *.ai files as *.jpg files automatically. Means it saves a copy via the Illustrator SDK (CS5).
Now, we got a problem with some files: While exporting, there appears an error message called "Adobe Save for Web AI Error" and, obviously, it stops the export.
I don't use an function called "Save for Web" and other people don't have the problem with our program.
Does anyone know why this message box is shown although we don't use this function?
Thank you in advance!
Regards from Germany
Fabian Bauer

All I can think of is that you're using some of the APIs that are associated with the "Save for Web" functionality and someone at Adobe put in a crappy error message (probably one they assumed would never been seen outside of "Save for Web"!).
Do you know what line of code is throwing the error?

What are BAPI /API for Installed Base in CRM ??

Hi Experts
Can any body give list of BAPI /API for IBASE Processing...??
Thanks,
AK

IB_CRM_ADD
CRM_IBASE_CHECK_TYP
IB_CRM_API
CRM_IBASE_ADDRESS_SEARCH
CRM_IBASE_CHANGE
CRM_IBASE_COMP_ADDRESS_SEARCH
CRM_IBASE_COMP_CHANGE
CRM_IBASE_COMP_CHANGE_TYPE2
CRM_IBASE_COMP_CREATE
CRM_IBASE_COMP_DELETE
CRM_IBASE_COMP_FIND
CRM_IBASE_COMP_FIND_MULTI
CRM_IBASE_COMP_FIND_MULTI_R
CRM_IBASE_COMP_GET_ADDRESS
CRM_IBASE_COMP_GET_DETAIL
CRM_IBASE_COMP_GET_FATHER
CRM_IBASE_COMP_GET_HIERARCHY
CRM_IBASE_COMP_GET_PARTNER
CRM_IBASE_COMP_GOTO_DETAIL
CRM_IBASE_COMP_GOTO_PARTNER
CRM_IBASE_COMP_IMPORT_DETAIL
CRM_IBASE_COMP_IMPORT_SUBSCR
CRM_IBASE_COMP_INDOBJ_SEARCH
CRM_IBASE_COMP_INDOBJ_SEARCH_R
CRM_IBASE_COMP_MOVE
CRM_IBASE_COMP_PARTNER_SEARCH
CRM_IBASE_COMP_PARTNER_SEARCHR
CRM_IBASE_COMP_TABLEINFO
CRM_IBASE_COMP_TRANSL_PARAM
CRM_IBASE_COPY
CRM_IBASE_CREATE
CRM_IBASE_DEQUEUE
CRM_IBASE_DRILL_DOWN_FOR_COMP
CRM_IBASE_ENQUEUE
CRM_IBASE_FIND
CRM_IBASE_FIND_MULTI
CRM_IBASE_FREE
CRM_IBASE_GET_ADDRESS
CRM_IBASE_GET_ALL
CRM_IBASE_GET_CHANGE_STATUS
CRM_IBASE_GET_DETAIL
CRM_IBASE_GET_HANDLE
CRM_IBASE_GET_PARTNER
CRM_IBASE_GOTO_DETAIL
CRM_IBASE_GOTO_PARTNER
CRM_IBASE_INITIALIZE
CRM_IBASE_PARTNER_SEARCH
CRM_IBASE_PARTNER_SEARCH_RANGE
CRM_IBASE_SAVE
CRM_IBASE_SET_HANDLE
CRM_IBASE_TABLEINFO
CRM_IBASE_TRANSL_PARAM
IB_BAPI_IBASE
BAPI_IBASE_CREATE
BAPI_IBASE_GET_DETAIL
BAPI_IBASE_SAVE
IB_BAPI_COMP
BAPI_IBASE_COMP_CREATE
BAPI_IBASE_COMP_GET_DETAIL
BAPI_IBASE_CREATE
IB_IBASE_CREATE
IB_IBASE_CREATE_INITIAL
CRM_IBASE_COMP_CREATE
CRM_IBASE_CREATE
IB_COM2_CREATE_IBASE
IB_COM_CREATE_IBASE_INITIAL
*--- Fetch Ibase Handle
 IF ib_handle IS INITIAL.
 CALL FUNCTION 'IB_COM_NEW'
 IMPORTING
 e_ibco_handle = l_handle.
 ib_handle = l_handle.
 ENDIF.
Pl. Do reward the points
Regards,
Arjun

Function Module required for IBASE component

Hi Experts,
Is there any FM which can get the warranty start date with IBASE component??
Warranty is assigned to IBASE component under relationship tab.
Points shall be rewarded for sure
Regards,
Madhu

Hi Madhu,
This the Table that is used to retrieve the Warranty Profile for the Installed Base. CDBD_IL_IBCWTY - Installed Base Components - Warranty Relationship. If you know the IBASE no and the corresponding COMP number then you can get the Warranty related details. Till now I was unable to find any FM that would do the same.
For the IBASE related details, you can have a look at the following Function Group. IB_CRM_API - IB: CRM APIs for IBase.
Thanks,
Samantak.
Rewards points for useful answers.

An internal error occurred while calling 'submitReport' API. (Error: ERR_WI

An internal error occurred while calling 'submitReport' API. (Error: ERR_WIS_30270)
We get above mentioned error message at any point in WebI Rich Client.
DataSource: Teradata 12.0 (Local machine)
BO XI 3.1 Client installed on local machine
Universe (Secured connection)
WebI : desiging and creating in Standlone mode
WebI client version : 12.1.0.882
Many times above written error is thrown 2-3 times even when we click on OK button and lastly followed by new error message:-
Unable to get the first page of the current report - Web Intelligence will switch to structure view (WIJ 20003).
Flow: We create report based on locally saved universe. There are couple of scenarios for which error comes
1) After successfully saving the report, reopen and refresh causes this error (1st error and 2nd)
2) Droping a properly written variable on measure column, if done Ctrl + Z, report works sometimes (both or 2nd error message)
3) Draging out the mesaure or dimension from report (only 2nd error)
Report is simple and no other stuff except the cross tab table
Even if we start with simply dropping the dimension and measures on report, 2nd error comes at any time.
What we noticed is that if we do all desiging in structure mode and then run instead of in result mode, reports works for more time.

You can have a look here:
Input Controls with Break Error on webi report
http://www.forumtopics.com/busobj/viewtopic.php?t=60789&postdays=0&postorder=asc&start=45
Re: internal error occurred while calling the 'submitReport' API.
I'm Back
HAPPY NEW YEAR

Getting error while calling AME api from the page

Hi,
I am calling ame api ame_api2.getallapprovers7 from our custom page.I have written following code-
public void getapprovers(String transactionid)
String OutError = "";
ArrayList al = new ArrayList();
OADBTransaction trans = getOADBTransaction();
String insStmnt = "BEGIN " +
"ame_api2.getAllApprovers7(applicationIdIn => :1,transactionTypeIn =>:2,transactionIdIn =>:3,"+
"l_processYN =>:4,approversOut =>:5); " +
"END;";
OracleCallableStatement stmt = (OracleCallableStatement)trans.createCallableStatement(insStmnt, 1);
try
stmt.setString(1, "800");
stmt.setString(2, "XXXXCWKAPP");
stmt.setString(3, transactionid);
stmt.registerOutParameter(4, OracleTypes.VARCHAR);
stmt.registerOutParameter(5, OracleTypes.ARRAY,"XXXX_APPROVER_TABLE");
stmt.execute();
// OAExceptionUtils.checkErrors as per PLSQL API standards
OAExceptionUtils.checkErrors(trans);
ARRAY arrayError = stmt.getARRAY(5);
Datum[] arr = arrayError.getOracleArray();
for (int i = 0; i < arr.length; i++)
oracle.sql.STRUCT os = (oracle.sql.STRUCT)arr;
Object[] a = os.getAttributes();
System.out.println("Column:" + a[0] + " Value:" + a[1]);
//OutError = (String)a[1];
//al.add(new OAException(OutError, OAException.ERROR));
stmt.close();
catch(SQLException sqle){
try { stmt.close(); }
catch (Exception e) {;}
throw OAException.wrapperException(sqle);
if (OutError != null)
// OAException.raiseBundledOAException(al);
4 and 5th parameters are out parameters and 5th parameter provides the approver records and it should have the same data type as ame_util.approversTable2. I have created this table type explicitly in oracle by the name XXXX_APPROVER_TABLE but i am getting the error while running the page "java.sql.SQLException: Fail to construct descriptor: Unable to resolve type: "APPS.ETHR_APPROVER_TABLE"". I requirement is to take the 5th parameter in ame_util.approversTable2 data type.
Please help me urgently.
Thanks
Ashish

Hi Kumar,
The ETHR_APPROVER_TABLE is custom pl sql indexed table that I have created.following are the parameters of api-
procedure getAllApprovers7(
applicationIdIn in number,
transactionTypeIn in varchar2,
transactionIdIn in varchar2,
approvalProcessCompleteYNOut out varchar2,
approversOut out nocopy ame_util.approversTable2);
i need a out variable of type ame_util.approversTable2 so get the values.
I have changed the code and now getting the following error-
java.sql.SQLException: ORA-03115: unsupported network datatype or representation
I have only changed this statement.
stmt.registerOutParameter(5,OracleTypes.PLSQL_INDEX_TABLE);//,"XXXX_APPROVAL_TBL");
Edited by: user5756777 on Jul 13, 2009 4:17 AM

Getting error when updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1

Hi,
I`m getting error message like "None of the apps in your project can be activated in the target. The manifest file of one or more apps contain API sets or Office applications that are not supported by
the target Office client. To debug those apps, update manifest files to exclude any unsupported API sets or Office applications, and then start the project again. Alternatively, you can debug your apps by using Office 365 as a target." when when
updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1 in manifest file though i have added host elements.
any help in this regard is highly appreciated
Thanks,
Santosh Sutar

Hi Satosh Sutar,
Based on the description, you got the error message when you update the apps from version 1.0 to 1.1.
From the error message, it seems the menifest include some settings no allowed in the new version. Would you mind sharing more detail about how you update the project?
And here is an article about updating apps for Office and menifest schema files in the project for your reference:
How to: Update the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

OIM 11g - Error while calling ignoreEvent() API

Hi,
I am getting the following error,while calling ignoreEvent API in my recon code:
"Thor.API.Exceptions.tcAPIException: Problem with the matching rule"
Any ide what could be causing the issue?.Thanks

Hi
This means, the reconciliation matching rules are not defined correctly. Please verify the following:
1. The key fields defined in the process definition for process match
2. The reconciliation rule defined for this resource object for entity match. This rule should the valid and active check boxes checked.
After verifying the above, click on the "Create Reconciliation Profile" button present in the Resource object's tabs.
Regards
user12841694

An internal error occured while calling 'getBlob' API. (error: ERR_WIS_3027

Hi Team,
Please help me in resolving the below error message.
One of my user is experiencing this when trying to run a report.
"An internal error occured while calling u2018getBlobu2019 API. (error: ERR_WIS_30270)". I have checked the previous discussion on the same, But I could not get it. Could some one help me as what I can do to resolve this.
Thanks in Advance
Mmvihar

Hi George Pertea,
Appreciate your prompt response.
I found a simple solution for this.
This error message occurs when the TOMCAT server memory exceeds more than 1.3 gb. Hence, restart the TOMCAT server would resolve this issue.
Here are the steps in detail.
1. Log into each server through either citrix, remote desktop or mstsc from run command.
2. Click on task Manager.
3. Click on process, if you find TOMCAT memory is more than 1.3 gb, come back to CCM and stop tomcat server.
4. Wait for 20 seconds and then start tomcat server. Check all the remaining servers and do the same
This resolved the issue.
Thanks & Regards
Mmvihar

Call of API for IBase contains errors

Similar Messages

Maybe you are looking for