Acct assignment cat. of item not in user data; Inform system admin

Hi all,
We are on a SRM EBP 5.0 project and we are getting the following error when we try to create a purchase order from the purchasers login.
"Acct assignment cat. of item not in user data; Inform system admin"
The complete details of the screen shot are as follows:
The following error text was processed in the system DS1 : Acct assignment cat. of item not in user data; Inform system admin.
The error occurred on the application server lndnysap1_DS1_01 and in the work process 0 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: ABORT_PO of program SAPLBBP_PO_UI_ITS
Form: ADD_TO_MSG_LOG of program SAPLBBP_PO_UI_ITS
Form: ADD_TO_MSG_LOG_MULTI of program SAPLBBP_PO_UI_ITS
Form: SET_PRICING of program SAPLBBP_PO_UI_ITS
Form: DETERMINE_EXTERNAL_SCREEN of program SAPLBBP_PO_UI_ITS
Module: DETERMINE_EXTERNAL_SCREEN of program SAPLBBP_PO_UI_ITS
We did the following steps :
Created shopping cart- employer and WF triggered apprd. by manager.
Purchaser did "Carry Out Sourcing ", and if we say "Create Purchase Order", the PO gets created with a information message that "Incomplete purchase order 11/1 is created "
When we go to "Process Purchase Order" for the completion of the same. If we see Follow-on documents "Purchase Order Held" occurs.
In the tab Item Data details Pricing tab we get this error.
Do any of the SRM gurus can suggest us what to do?
In our admin logon it shows
"Server for pricing is not running. Start Server" occurs after every run of this process purchase order from the purchasers login, though our IPC is working fine.
Will be of great help if somebody replies soon.
Sincerely,
Sridhar.

Hi,
IPC has to be configured.
Please check the following threads :
https://forums.sdn.sap.com/click.jspa?searchID=211089&messageID=2714527
https://forums.sdn.sap.com/click.jspa?searchID=211089&messageID=2715019
Kind regards,
Yann

Similar Messages

The Organizational Data could not be determined. Inform system admin

Hello All,
I am able approve PO from EBP, but getting this error 'The Organizational Data could not be determined. Inform system admin' when trying to appove PO from Universal Work List (portal) or when I try to open the work item via Busines Workplace (SAP GUI). Can anybody tell me if there is any config missing? or any suggestions to resolve this issue.
Any kind of help appreciated and rewarded.
Thanks,
Shekar

Hi Chandra,
Please check the Purchasing Organization and Purchasing Group in PO if they are not populated then this error is triggered. Please also check the user settings whether Purchasing organization information is maintained or not.
Regards,
Ravi G

Backend checks could not be performed. Inform system admin

Hello SAP Experts,
We have encountered the error Backend checks could not be performed. Inform system admin in a lot of POs in SRM. We are using SRM 7 and SP12.
Before the error occured, the WBS elements were not maintained in SRM but the POs were created since our SHC has automatic approval.
Currently, the WBS elements are now in SRM but the POs are stucked with the error Backend checks could not be performed. Inform system admin.
We have informed the Basis team if there are any issues in the RFC connections but there is no error.
The only POs affected were the ones wherein the WBS element was not maintained before but is now maintained in SRM.
Regards,
Romeo

Hi Chandra,
Please check the Purchasing Organization and Purchasing Group in PO if they are not populated then this error is triggered. Please also check the user settings whether Purchasing organization information is maintained or not.
Regards,
Ravi G

SRM: Create Contact Person Could not create user; contact your system admin

Hi All,
First, I am not sure this question should be posted here, or SRM General. From my point of view, here is more suitable.
Our Problem:
Activity "Create Contact Person With Reference" error with message:
Step to reproduce:
1. Login to SRM JAVA as super administrator
2. Open tab "SRM Administration"
3. Using the current query, search for Business-Partner no: 30000725
4. Press "Create Contact Person with Reference"
5. Fill all required fields, tick "Is contact person" checkbox
6. Put: /SAPSRM/SUPPLIER as Role
7. Save
The following Message appear:
Could not create user; contact your system administrator
SPML Service error: Error reading request status. Display Help
Contact Person 2000000214 Created Successfully for BP 30000725 Display Help
E-mail was sent
The first error is intriguing. The username & password is created successfully in ABAP System (Our UME is in ABAP).
QUESTIONS:
1. What cause this problem? How to trace the error?
2. We want the user have portal role automatically. How to achieve that?
Thank you for any responses and helps.
SRM ABAP Version:
SRM_PLUS     700     0009     SAPKIBK209     SRM_PLUS for mySAP SRM
SRM_SERVER     700     0009     SAPKIBKV09     SRM_SERVER
SAP_ABA     701     0007     SAPKA70107     Cross-Application Component
SAP_BASIS     701     0008     SAPKB70108     SAP Basis Component
PI_BASIS     701     0007     SAPK-70107INPIBASIS     Basis Plug-In
SRM JAVA Version:
SRM JAVA: Release 7 SP Level 9.0
BP SRM: Release 7 SP Level 9.0
Edited by: Nur Agus Suryoko on Mar 11, 2011 11:36 AM
Version information added

Hi Fernando,
Can you please tell me how you resolved this issue ??
Regards,
Adren

Acct Assignment Cat."P" of PR in ECC cann't be brought to EBP

Dear everyone.
    when I create PR with "P" of Acct Assignment Cat. in ECC, PR is transfered to EBP as shopping cart. but I found the Acct Assignment Cat. is "CC" ,not "WBS", this is not normal.
    Because in SRM IMG. the "CC" mapping to "K" ;the "WBS" mapping to "P" ; the "AS" mapping to "A".
    Addintional, if I create PR with "K" or "A", then related shopping car's Acct Assignment Cat. is "CC" or "AS", it is right.
    I have a test, I inactived "CC"mapping to "K", and make "WBS" mapping to "K", while I creat the PR with "K" , PR cann't be transfered to EBP. the error message is "Account assignment category CC does not exist. Check entries"
    Why, doesn't the "cc" be fixed?
    Please help me ,it is urgent.I will reward for this.
Jesse.

Jesse,
If I read you problem right, the problem is that inactivated 'CC' in EBP. How's that configuration done in ECC? We are not using ECC at this time but it looks like you need to synchronize the account assignment configuration between the two systems.
Just my 2-cents, I hope that the fix is that easy.
Regards, Dean.

Attribute for user contains errors. Inform system admin

Hello,
We've got an issue with shopping carts created by a user that was deleted from system. When trying to see in Monitoring Shopping Carts header or item details of a given sc. A web error occurs:
The URL http://srp.srm.gruposalinas.com.mx:8000/sap/bc/gui/sap/its/bbpsc11/! was not called due to an error.
Note
The following error text was processed in the system SRP : Attribute for user contains errors. Inform system admin.
The error occurred on the application server srm-pro_SRP_00 and in the work process 2 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
We've cheked SAP NOTE 312058-BBPPU99: Error: Attribute for ... is missing. Inform ...
But it seems that none of the information applies to us, since this issue is only present for Shopping carts that were created by this deleted user.
So we tried to re-assing one of this sc, chaning PARTNER_NO,ADDR_NR
ADDR NP data in table CRMD_PARTNER according to a new given user, but it didn't work. So we need to know how to re-assing this sc or perhaps how to find what specific attribute is missing.
Any advice is welcome.
Thanks in advance.

Hi
Which SRM version are you using ? This is an SRM error message.
The manager role should be enough to change user attribute. The transaction is BBPATTRMAINT. Employee role should have BBPUM02 or BBPAT05 to change their own attribute.
Please check whether the User ID you are using to Log into BBP_PD (and seems to be assigned in the org structure also)is consistent and has no errors in tcode USERS_GEN. You should check the user, it's not set up properly in USERS_GEN Transaction, Else repair the user.
To maintain the user attributes you must have the Administrator role.. Your user should have role SAP_BBP-STAL_ADMINISTRATOR and be integrated in the org structure. your user must be integrated in SRM organizational structure. To see which attributes are missing, you can click on the user in PPOMA_BBP to see details, and go to last tab "Check". This will list all required attributes depending on used scenarios (so you may not require all of them). You can also use transaction BBP_ATTR_CHECK to check user's attributes for a particular scenario.
Please go through the following links as well ->
bbp_mon_sc attributes
Re: FM for attribute's value assignation in PPOMA ?
Note 751022 - Monitor Shopping Cart: Item deletion causes termination
Re: User Settings are not saved
Re: Not able to generate user users_gen
Re: SRM organization plan...
Re: User creation error
Hope this will definitely help. Do let me know.
Regards
- Atul

Buffer Table not up-to-date SUS System

Hi Experts,
I am working in classic decoupled scenario, where the RFx is published to SUS system.
The bidder logs into SUS system and creates Response for RFx. In case of line items more than 10, the system is giving a dump.
The Background program BBP_BID_INV_BACKGROUND_PROC is started and gives a dump in ST22.
The job log shows :Buffer table not up-to-date. Below is the detailed ST 22 Error.
The exception, which is assigned to class 'CX_BBP_PD_ABORT' was not caught and therefore caused a runtime error. The reason for the exception is: Buffer table not up-to-date
Information on where terminated
The termination occurred in ABAP program "SAPLBBP_PDH", in "BBP_PD_ABORT". The main program was "BBP_BID_INV_BACKGROUND_PROC". In the source code, the termination point is in line 81 of (Include) program "LBBP_PDHU08".
I went through other posts with the same error, but could not get any suitable resolutions. Please do let me know where to check for this.
Regards,
Krishna

We're having the same problem. Any word on how to resolve. It states also that its a BSP error in that it would not load the BSP page because of the buffer error. I tried using T_Code SWU_OBUF to perform the synchronization process, and still had no luck. Any help would be appeciared.
JD

Organization O 50000716 is not a purchasing group; inform system administra

Dear Expert,
Need your help, we using SRM 7 with extended classic scenario, we use workflow for PO with 3 levelling (if the value of po more than 200 million Rp). now, there is no problem when we approve this po for approver 1 and approver 2. but when the approver 3 want to approve this PO, these error show up:
Organization O 50000716 is not a purchasing group; inform system administration ( i actually have assign a purchasing group in function tab for this organizational unit )
System of purchasing organization O 50000658 and purchasing group O 50000716 differ (there is a different with the company code for O 50000658 (cc:1000) & O 50000716 (cc:1100)) but i'm not sure this is the cause.
best regards,
Melynessa

Hi Melynessa
Did you maintained a purchasing organization for the approver 3? A purchasing group and a purchasing organization are needed.
Try to compara the information of approver 1 and 2 with approver 3 (PPOMA_BBP, SU01, etc).
I hope this helps.
Christian Zeuch

Login items - not in user prefs

My wonderful imac os x - tiger 10.4.7 opens 3 items (safari, mail and ichat) that are not in the startup items list.
As the initial login takes ages I want to remove them, but as they don't appear in the list under accounts/login items I can't.
I have tried adding them so they do appear and then deleting them, but that doesn't fix it, they still open on login.
Any ideas how I can fix this.

"Login Items" can be specified in at least three different places. The usual one (written to by the "Accounts" pref pane) is the "~/Library/Preferences/loginwindow.plist" file in each user's "home" folder, but if the items aren't appearing in the pref pane, they are probably listed in one of the other locations.
The other user-specific file is in the "~/Library/Preferences/ByHost" folder, and is called the "loginwindow.xxx.plist" file, where the "xxx" usually represents the MAC address of the built-in ethernet card, so will vary from computer to computer. If present, try moving or deleting that file to see if that prevents the unwanted items from opening.
The computer's main "/Library/Preferences" folder can also contain a "loginwindow.plist" file, but any items listed in that file will open at login for all users. "Admin" privileges will usually be required to remove or make changes to this file.
Also, note that a computer's administrator can set up "login items" for "managed" users, through 'mcx_settings'. Again, this isn't something that an individual user can override themselves.
This probably isn't what you are after, but unless explicitly prohibited in 'mcx_settings', it also is possible during any given log in to prevent login items from opening by holding down the "Shift" key while logging in, but it would be necessary to do this every time.

Acct assignment cat

Dear All,
In OVZG, account assignment cat is E.
1) may i know what is KD-CO and Ind cust?
2) where I can see the mapping of the code below with GL?
B   Make to stock KD-CO
C   Sales order
E   Ind. cust. w. KD-CO
M   Ind.cust.without KD
Q   Proj. make-to-order
V   Ind. cust. w. KD-CO
Thank you

Hi,
IPC has to be configured.
Please check the following threads :
https://forums.sdn.sap.com/click.jspa?searchID=211089&messageID=2714527
https://forums.sdn.sap.com/click.jspa?searchID=211089&messageID=2715019
Kind regards,
Yann

Conversion of user date to system format

i have a problem in conversion of user date.
i use a function module in which the user have to give the date as input. he can give the date in any format like MM/DD/YYYY or DD.MM.YYYY etc . how to convert the given date into the system date.

hi,
use FM CONVERT_DATE_TO_INTERNAL
cheers,
sasi

Account assignment for service item not copied from PR in PO

Hi,
We have a PR created for a service item from SRM. When we run ME59 it automatically creates the PO without issues by copying the account assignment details from the PR. The problem is as follows:
1. If we try to manually create a PO using ME21N from this PR, the account assignment is not getting copied from the PR but it throws the account assignment pop up screen where we manually have to enter the account assignment.
2. The client is using a Z transaction of ME59 which is copy of Me59 but with a few validations (nothing to do with Account assignment). This Z Tcode also fails to create the PO with the error 'no account assignment'. Indicating that the PR account assignment details are not getting copied.
Note: This is happening for all PR's irrespective of whether its created in SRM or created using ME51N.
Please let me know if someone has faced a similar issue
Thanks,
Lakshmi

Hi,
Please check first if notes 1085214 and 1102653
could solve the issue.
Regards,
Edit

Acct Assignment Cat Goes Blank When Outline Agreement is Added to PO

PO line item has AAC "Q". OA field is blank. When we manually put the OA number on the PO line item, the "Q" disappears. We just went to ECC, and it seems like a new issue.

The contract has AAC "blank". The PO has AAC "Q". Sometimes it blanks out the AAC on the PO when the contract is added. Sometimes it does not.

DBDataSources not up to date in system form

Hi guys,
I really need you help on a issue.
I'm trying to read all records in the matrix of the Sales Order (System Form)
Now i'm using the datasource (DBDataSource) of this form to get the values, because this is faster then getting the values from the matrix.
I run the following code on the before et_CLICK event on the Update Button. And i get this message:
Data Source - Bad Data Source Offset at SAPbouiCOM.DBDataSourceClass.GetValue(Objext Index, Int32 RecorNumber)
This issue seems to occure when i duplicate or add some lines and hit the Update Button. The amount of lines in the datasource is still the same as when i opened the Sales Order. But the number of records in the matrix is larger. So it seems that the datasource has not been updated when i added the lines.
Does anyone has a solution for this?
//Cache the document matrix
 SalesOrderCached salesOrderCached = new SalesOrderCached();
 ui.Matrix mtx = (ui.Matrix)form.Items.Item(SBO_FormTypes.Document.ItemMatrix.VALUE).Specific;
 ui.DBDataSource dataSource = form.DataSources.DBDataSources.Item("ORDR");
 ui.DBDataSource dataSourceLines = form.DataSources.DBDataSources.Item("RDR1");
 salesOrderCached.DocNum = dataSource.GetValue("DocNum", 0);
 salesOrderCached.CardCode = dataSource.GetValue("CardCode", 0);
 for (int i = 1; i < mtx.RowCount; i++)
 mtx.GetLineData(i);
 SalesOrderLineCached salesOrderLine = new SalesOrderLineCached();
 salesOrderLine.LineNum = i;
 salesOrderLine.ItemCode = dataSourceLines.GetValue("ItemCode", i -1).Trim();
 salesOrderLine.WarehouseCode = dataSourceLines.GetValue("WhsCode", i -1).Trim();
 salesOrderLine.LineTotal = Convert.ToDouble(dataSourceLines.GetValue("LineTotal", i -1).Trim(), NumberFormatInfo.InvariantInfo);
 salesOrderCached.SalesOrderLinesCached.Add(salesOrderLine);
 return salesOrderCached;

Unfortunately not.
the only thing I can think of trying is using the GetCellSpecific method of the matrix object. I have never used it but I see in the helpfile SAP say "This is the recommended way to get the contents of a cell."
Worth a try but highly unlikely to work would be to use matrix.FlushToDataSouce().... but I would bet it won't work unless it's a user defined item. A similar method would be "GetLineData()"
So I think it will be either GetCellSpecific to see if it improves performance or some sort of workaround
EDIT: Actually, maybe try SerializeAsXML. It will be extra development time but bound to be faster.

The data type of "output column "Cookies" (7371)" does not match the data type "System.Int32" of the source column "Cookies"

I have the following data flow:
ADO Source
Input Column: Cookies ID: 7371      Datatype: DT_NUMERIC
Output Column: Cookies     ID: 7391      Datatype: DT_NUMERIC
DATA CONVERSION TASK
Input Column: Cookies       ID: 1311     Datatype: DT_NUMERIC
Output Column: Copy of Cookies   ID: 1444    Datatype: DT_I4
SQL Server Destination
Input Column: Copy of Cookies    ID: 8733    Datatype: DT_I4
Output Column: Cookies       ID: 8323     Datatype: DT_I4
This looks fine to me. Why am I getting the error?
This is SQL Server 2008 and I am working at this point only in BIDS, so it is not a question of dev vs prod server or anything. One environment, running in BIDS. Other similar data flows seems to be working ok. It seems the error is referring to a datatype
mismatch in the source--but how can that be?
Thanks!

Actually, I am wrong in that Visakh. I think you are correct.
There are two versions of all tables, one with 15 minute rollups and one with daily rollups. Otherwise the tables are the same--same exact fields. I use a loop with a data flow inside to get data from one version of the rollup and then the other.
The problem is, for some of the fields with larger values the datatype is NUMERIC instead of INTEGER. (This is Cache database). SO:
dailyCookies:   Field: CountOne   Datatype: NUMERIC
15minCookies:   Field: CountOne   Datatype: INTEGER
A variable dynamically creates the query so it appends "daily" or "15min" to the beginning of the tables. So on the first loop it does the 15min tables and on the second the daily tables. When I created this particular table I have to plug a default query
in so I used the daily. It picked up the datatype as NUMERIC so when I run the package it loops through 15min first and sees the datatype is INTEGER.
How to deal with this? I suppose I could convert the datatype in the source query, but that would be a hassle to do that for some fields and not others. This tables has hundreds of fields, BTW. Can one source object deal with a change of datatypes? SSIS
is so picky on datatypes compared to other tools....
Thanks,

Acct assignment cat. of item not in user data; Inform system admin

Similar Messages

Maybe you are looking for