The Organizational Data could not be determined. Inform system admin

Hello All,
I am able approve PO from EBP, but getting this error 'The Organizational Data could not be determined. Inform system admin' when trying to appove PO from Universal Work List (portal) or when I try to open the work item via Busines Workplace (SAP GUI). Can anybody tell me if there is any config missing? or any suggestions to resolve this issue.
Any kind of help appreciated and rewarded.
Thanks,
Shekar

Hi Chandra,
Please check the Purchasing Organization and Purchasing Group in PO if they are not populated then this error is triggered. Please also check the user settings whether Purchasing organization information is maintained or not.
Regards,
Ravi G

Similar Messages

  • "The Destination Directory Could Not Be Determined For Photo Delluxe 4.0"

    I Downloaded Adobes Photoshop from thier Site.
    When trying to install pdx401upus.exe,
    it will open up the Installation Wizard and then I get the Following "Warning" Message....
    "The Destination Directory Could Not Be Determined For Photo Delluxe 4.0"
    it just gives me a box to check that says "OK", and then the Wizard Shuts down.
    Im running an HP Computer with Windows 7, Tons of HD Space, Ram, Memory ect.
    I love using Adobe Photoshop, but since I got this new computer,
    my Adobe Photoshop install disc seemed to be too old (Windows 95),
    and therefore would not load to my new Computer/Operating System.
    Any pointers, Websites, Instructions would be greatly appreciated.
    Although I'm not a "Computer Dummy" I know just enough to get me into trouble, so the simpler the instructions....the better.

    I am sorry Wwotr but I have not observed a user who has successfully installed and used Photo Deluxe on Windows 7.  Since Photo Deluxe we have released 10 versions of Photoshop Elements.  I would recommend utilizing the trial of Photoshop Elements 10 and seeing if that will fullfill your needs.  You can find more information at http://www.adobe.com/products/photoshop-elements.html.

  • The system is not reachable, the login data could not be considered

    Hello
    I'm trying to connect via Hana Studio to a Hana One instance I have configured in AWS, following the guides & videos in the Hana Academy.
    When adding the system in Hana studio, I get an error message after inputting the SYSTEM password:
    The system is not reachable, the login data could not be considered
    I've seen another post in the forum where the user solved the issue by resetting the SYSTEM password to a password without special characters, but mine is already "special character" free.
    Are there others who have had difficulties when adding a new system?
    Regards
    Yann

    Hi Swapan,
    Thank you for your attention and message.
    I downloaded the SAP HANA Studio from "Get your own SAP HANA, developer edition on Amazon Web Services (http://scn.sap.com/docs/DOC-28294)", specifically at SAP HANA Studio, developer edition and SAP HANA Client, developer edition, for Windows XP 32-bit. Is this HANA One? How to know the version of HANA server? How to make my Internet or firewall allow me to go out to the JDBC port? I am just learning to deal with these computer-science issues.
    Regards,
    Beiwei 
    Date: Wed, 4 Sep 2013 20:52:41 -0700
    From: [email protected]
    To: [email protected]
    Subject: Re: - The system is not reachable, the login data could not be considered
                                                                                    SAP HANA
        The system is not reachable, the login data could not be considered
        created by Swapan Saha in SAP HANA One Platform on AWS - View the full discussion
    Hi Beiwei,
    I suppose you are using HANA One (which you can only launch today from AWS Marketplace and HANA costs 99 cents/hr). If it is HANA One, which version of HANA One you are using? Please make sure you are using the same version of HANA Studio with HANA Server?  Instance number in HANA One is 00.
    If you HANA One, by default, it will open all the necessary ports. Please make sure you are Internet or your firewall allow you to go out to the JDBC port. If not, you cannot connect your studio behind your firewall with HANA server in the cloud.
    Thanks,
    Swapan
         Reply to this message by replying to this email -or- go to the message on SAP HANA
         Start a new discussion in SAP HANA One Platform on AWS by email or at SAP HANA

  • Error:The grouping element could not be determined for project

    Hi,
    When I am trying to issue goods for a project,I am getting the following error
    "The grouping element could not be determined for project 1., plant 2., and MRP group 3.."
    what may be the reason for this reason.
    Regards,
    Raju

    Hi,
    You are using Automatic Requirement Grouping in your project and there is some issue with the Material Master,please check the Material Master Views.
    Muzamil

  • Exchange 2010 - The certificate status could not be determined because the revocation check failed.

    I have tried everything I have found online to get my DigiCert to work.
    I have exported the cert and imported it into my child domains and they look perfect.
    It is just my parent domain having issues.
    netsh winhttp show proxy
    does show my correct proxy server for http and https and port 8080
    I have tried name, FQDN and IP address.
    In the Bypass-list I have tried none, *.domain.com, and a list of all domains and child domains in my forest.
    I have flushed the cache
    certutil -urlcache crl delete
    certutil -urlcache ocsp delete
    and rebooted the Exchange 2010 (Windows 2008 R2) server
    No matter what, I still see in my Server Configuration for the parent domain's DigiCert cert the message
    The certificate status could not be determined because the revocation check failed.
    with a red X on the left hand icon.  Again, Child domains all say "The certificate is valid for Exchange Server usage."
    Note: In spite of having the red X, I was able to assign via EMS the services.
    Webmail works fine.  Outlook Anywhere fails... I suspect it is due to my red X problem.
    Suggestions?
    Thanks in Advance
    Jim.
    Jim.

    I have contacted DigiCert and they said the cert is working per their utility, hence the problem is outside the scope of their support.
    I have followed, several times, http://support.microsoft.com/kb/979694
    http://www.digicert.com/help/  reports all is well.
    The DigiCertUtil.exe reports all is well and happy.
    I have run
    netsh winhttp set proxy proxy-server="http=myproxy:8080;https=myproxy:8080" bypass-list="*.mydomain.com"
    Current WinHTTP proxy settings:
        Proxy Server(s) :  http=myproxy:8080;https=myproxy:8080
        Bypass List     :  *.mydomain.com
    I have flushed the cache using the commands
    certutil -urlcache crl delete
    certutil -urlcache ocsp delete
     I still see in my Server Configuration for the parent domain's DigiCert cert the message
    "The certificate status could not be determined because the revocation check failed."
    with a red X on the left hand certificate icon. 
    To verify the cert via command line:
    certutil -verify -urlfetch c:\mail_domain_com.cer
    LoadCert(Cert) returned ASN1 bad tag value met. 0x8009310b (ASN: 267)
    CertUtil: -verify command FAILED: 0x8009310b (ASN: 267)
    CertUtil: ASN1 bad tag value met.
    I suspect this is why I cannot get Outlook Anywhere to connect.
    Child domains show a happy certificate icon. Parent domain does not.
    Still scratching my head.
    Thanks all!
    Jim.

  • Error Log: The Billing Type Could Not Be Determined

    Hi Experts
    I have to produce the credit note sebsequent to the return.  But I am getting the "Error Log: 0084001006 0000 The billing type could not be determined".  Kindly help me with the solutions
    Thanks and Regards
    M.Dheerendar Jain

    Hi,
    Please check copy control VTFL for delivery and billing type
    go through the routine 350 (VAT Determination) whteher it is applied in ite category.
    if yes, then you have to configure the VAT Invoice type determination.
    also maintain the entries in below tables:-
    J_1IDCLSDET &  J_1IBILDET
    Even if the above entries are already maintained then check the supplying and receiving plant entries
    for the billing.
    To maintain entries in table go to t-code SM30.
    and put the above table in the "Table/View" it helps to determine FVAT Invoice types
    Invoice types determined based on supplying and receiving plant.
    Kinldy check and confirm.
    Thanks & Regards,
    Rahul Verulkar

  • Alchemy for xfi - the product state could not be determined (error 6

    as the title states I have xfi platinum & installed alchemy for xfi, tried to start it & I get "the product state could not be determined (error 60)" I click any of the links & it takes me to the buy page for the audigy alchemy. I've tried uninstalling & reinstalling multiple times, also uninstalled & reinstalled my xfi drivers. No change. I can enter anything into the entry field on the activation page & It'll advance me to the next page, then when it goes to connect to creative to register. I get another error. "an error occurred while attempting to connect to the internet. (00000)" I dont have anything blocked regarding this program & have tried with my firewall disabled. Please. Help

    Well I didnt follow the link, but a kind person did download an update for Windows for me, if i can find link i will post it is from USA, took over 2 hours to install/update but appears to fix this problem, i now have all the bits that windows left out back on pc, so there is a solution out there, i know the site it came from there had been 80,000 downloads in over 2 days.

  • The billing type could not be determined" .

    Hi All,
    When i am excuting bap BAPI_BILLINGDOC_CREATEMULTIPLE i by passing ref_doc its giving error that "The billing type could not be determined" .
    Is i have to pass something else.
    Regards,

    Can you tell how did you resolve this?
    I'm getting the same situation and have no idea
    Thanks in advance.

  • ITunes returns Error Message cannot sync apps installed on iPad because the apps installed could not be determined

    Hello,
    I have been trying to fix this problem with no success for awhile. When I try and backup and sync my iPad Air iOS 7.1.1 iTunes keeps returning the error message
    " iTunes cannot sync apps to the iPad because the apps installed on the iPad could not be determined"  iTunes is current with all updates and is running on a MacBook Pro 8,3 running OS X 10.9.3.

    Hi RayCanada,
    Welcome to the Support Communities!  I'm not sure what steps you have taken so far to troubleshoot this issue, but I have a couple of suggestions for you to try.  The first thing I would suggest is to quit all apps and sign out of the iTunes Store on your iPad, disconnect it from your Macbook Pro, and turn it off.    Then restart your Macbook Pro.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT1311?viewlocale=en_US
    Tap Settings > iTunes & App Stores.
    Tap your Apple ID.
    Tap Sign Out.
    Turn your iPad Air on, and sign into your iTunes Store account using the same Apple ID you used to purchase the apps.  Connect it to the MacBook Pro using the Apple USB cable that it came with.  Try to sync again with your iTunes library on your Macbook Pro.
    Alternatively, you can download any iTunes Store purchased content using the same Apple ID directly to your iPad.  Here's how:
    Download past purchases
    http://support.apple.com/kb/HT2519
    Not sure which Apple ID you used to make purchases?  You can review your entire purchase history using your computer:
    iTunes Store & Mac App Store: Seeing your purchase history and order numbers
    http://support.apple.com/kb/ht2727
    I hope this information helps ....
    - Judy

  • Exchange rate of USD in INR for date could not be determined

    Hi
    I have a problem while creating a RE Sales order.
    Error is :
    Exchange rate of USD in INR for date 21.07.2006 could not be determined
    Help will be appreciated.
    Regards,

    Hi,
    Pls check the following things:
    In the customer master >sales area data> sales tab page, check what is the exchange rate type maintained. Default is "M".
    Now, go to SPRO>General Settings>Currencies>Enter exchange rates and under this node, check the value for USD to INR for the Echange rate type maintained in the customer master.
    For the date mentioned, the exchange rate might be missing here.
    Hope, this helps!
    Thanks,
    Siva

  • Error the actual price could not be determined while executing CKMLCP

    Hi!
    we are facing the problem while executing CMLCP, the error message is "The actual price for 10VN000012/MHR could not be determined" ( error message number CKMLLA102).
    Our scenarios is as below:
    we have 4 activity types out of which activity type "MHR" are used only for Indirect activity allocaiton tracing factor that means all service costs from service cost centres will be distributed to production cost centres in the ratio of actual quantity confirmed for MHR activity type.
    for this activity type we will not have any actual cost distribution, so there will not be any actual cost for this activity type.
    So, as actual quantity is confirmed during production process and while executing CMLCP is expecting actual price for the same ( we are executing KSII for actual activity price calculation before costing run).  is there any enhancement to avoid this error, because our client don't want to allocate cost to this activity type.
    regs,
    ramesh

    Hi Ramesh,
    Message CKMLLA102 is standard system behaviour when the actual
    price of an activity is zero because cost center accounting does not
    allow actual prices to be zero.
    Unfortunately the system can't distinguish an actual activity price
    of zero from a not yet calculated activity price, so for activities
    with actual price zero the message CKMLLA 102 is sent.
    Have you check the SAP note 361379?. It provides you some options to overcome
    the issue.
    Best regards,
    MLM

  • Shipping data could not be determined for the material

    hi all,
    while creating STOs for i get a message that shipping data for the material canoot be determined for the material. the plants are maintained as customers. the shipping tab in item detail in STO order is not appearing. the shipping point is getting dertmined for sales orders from the same plant and material. am also able to ceate STOs between other pair of plants.
    thnx in advance
    saurabh
    Message was edited by:
            saurabh diwakar

    Hi,
    Shipping point is determined by <b>"shipping conditions"</b> + <b>"loading group"</b> + "<b>plant"</b>.
    <b>Shipping conditions</b> are fetched from customer master / or if maintained in the sales doument type they are fetched from there.
    <b>Loading group</b> fetched from material master.
    <b>Plant</b> fetched from CMIR / CMR / MMR.
    You do the shipping point determination using the transaction code <b>"OVL2"</b> If <b>SC or LG or PLANT</b> are deviating from the entries in the customer or material master then also you will not get the shipping point.
    Reward points if solution helps.
    Regards,
    Allabaqsh G. Patil

  • Error message while CREATING PO - PGrp could not be determined

    Hi all,,.
    We are on SRm 7. ECS.
    The issue we are facing is:
    WHen I click on CREATE PURCAHSE ORDER trasnaction,I get this message "Purcahsing group could not be determined;Inform system administrator".
    Edited by: nmsrm1234 on Nov 10, 2011 2:09 AM

    Hello,
    The error is coming because to create PO directly you have to be a Purchaser,you need to belong to a purchasing group in SRM.In PPOMA_BBP  Assign your user id below a purchasing group directly or right click the present position and go to 'Assignment-->Purchaser Assignment', select a purchasing group and save.
    Then Try creating now a purchaser order directly .
    Regards,
    Neelima

  • Siri could not download required information from the server

    I'm getting the message "siri could not download required information from the server". I haven't been able to use SIRI for 5 days. Does anyone know an answer?
    I've tried turning SIRI off, rebooting, and turning it back on. You know, the old PC approach.
    I have an excellent WI-FI connection.

    Not an answer but I do know if I do not have a good internet connection (3G or WiFi) I get that same error. Has always cleared up for me once that was resolved.

  • An error occured while creating the new dataset Could not get type informat

    Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
    I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
    Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
    My Path variable list the following:
    C:\app\Administrator\product\11.1.0\client_1;
    C:\app\Administrator\product\11.1.0\client_1\bin;
    C:\oraclexe\app\oracle\product\10.2.0\server\bin;
    C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
    C:\Program Files\Borland\BDS\4.0\Bin;
    C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
    C:\PROGRA~1\Borland\vbroker\jre\Bin;
    C:\PROGRA~1\Borland\vbroker\Bin;
    C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
    C:\WINDOWS\system32;C:\WINDOWS;
    C:\WINDOWS\System32\Wbem;
    c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
    C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
    C:\Program Files\java\jdk1.6.0_07\bin.
    Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
    Also noted that while deploying at client site I started gett'n this error:
    "Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
    Is it due to change in the production machine? Any help in this regard is greatly appreciated.

    Hi Pushpa,
    Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
    Further,suggest you explore if the below resolutions can be adopted in your case.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
    http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
    Regards,
    Pradeepkumar haragoldavar

Maybe you are looking for