Attribute missing in data model

Hi,
I recently created a Model project. The App module of the model project has an instance of a View Object. There is an attribute in the View Object that is of a custom type.
In the UI project, when I refresh my data object, I am not seeing that particular attribute. I am seeing all other attribute. ADF version
11.1.1.3
Can someone help me figure out what the problem could be?
Edited by: 926653 on Sep 18, 2012 8:31 AM

The attribute is added to the VO. The VO is added to Application Module. The problem is - in the "Data Model" view that shows all instances listed in data model, it does not show me the attribute.
The only difference that I can notice between this attribute and the other attributes that show up is is its data type. The missing attribute is of data type that is a custom one. Others have one of the jbo classes as their data type. I am not sure if it matters.
Do you have any suggestions on what I can check?

Similar Messages

  • Report parameter textboxes and execute button is missing. Date Model works.

    Hello,
    I created a BI Publisher Data Model. Did the testing of it by generating XML sample data.
    The data model requires 3 parameters as input. All worked fine for generating the XML.
    When I now create a report with a .rtf template that uses the data model. then
    no parameter-entry header appears. no execute button either. why is that?
    thanks.

    I think the issue is a bigger one. when I try to upload the template I get the pop up saying "Object reference not set to an instance of an object". The .rtf template is not bigger than 2mb.

  • Dynamic table in Oracle report data model using laxical parameter is giving error Ora-00936: missing expression

    Hi ,
    I am using Oracle report 10G
    And trying to create report with dynamic table
    SELECT &COL1, &COL2
    FROM &TAB
    If I put this on data model it gives below error
    ORA-00936: missing expression
    ==> from
    Can anybody advise to solve this issue.
    Regards,
    Brajesh

    Look in the Reports Builder Help:
    If you want to use lexical references in your SELECT clause, you should create a separate lexical reference for each column you will substitute. In addition, you should assign an alias to each lexical reference.
    Does adding the column alias solve the problem?

  • Object Types Attributes (Data Modeler 3.0 EA1.)

    Hi,
    Will the attribute object type support in data modeler be upgraded to the same functionality as column relational table support in 3.0? For relational columns I can attach a domain to a column, I can't attach a domain to an attribute in an object type. Also for a column I can define a 'Units', that is VARCHAR2 (30 BYTE) orVARCHAR2 (30 CHAR). If can't do this with the (Data Modeler 3.0 EA1.) for an object type's attribute. Will this be included?
    Thanks,
    Scott

    Sue,
    Thanks to you and your team for extending this to the object type (structured type) portion of SDDM 3.3 EA1 and 3.3 EA2. The object type portion of SDDM is pretty robust now for modeling and actually generating useable structures in the database (Oracle) now. With 3.3 EA2 at this point it will be much easier to take advantage of the object type features in the database and our applications. I have been waiting since Oracle version 8 for the tools team to provide a modeling tool that mirrors the functionality the server team has provided when it comes object types.
    Thanks for this in SDDM 3.3 EA1 and SDDM 3.3 EA2!
    ScottK

  • Missing IN or OUT parameter at index on Data Modeler

    Hi,
    I'm using Data Modeler 2.0.0 build 570 (with Java 1.5.0 (build 1.5.0_15-b04)).
    Usually I import tables from Data Dictionary (Oracle Database 10g Enterprise Edition Release 10.2.0.3.0) into a relational model, I modify them and then I export relational model informations into a Reporting Schema (different oracle schema inside same db).
    I cannot understand why sometimes, during these exports, I get the error "Missing IN or OUT parameter at index"
    Here an extract of the Data Modeler log file:
    2009-09-15 16:00:36,601 [Thread-6] ERROR ReportsHandler - Error Exporting to Reporting Schema:
    java.sql.SQLException: Missing IN or OUT parameter at index:: 10
         at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
         at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:110)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:171)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:227)
         at oracle.jdbc.driver.OraclePreparedStatement.processCompletedBindRow(OraclePreparedStatement.java:1737)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3376)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
         at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1061)
         at oracle.dbtools.crest.exports.reports.RSCheckConstraint.export(Unknown Source)
         at oracle.dbtools.crest.exports.reports.RSColumns.export(Unknown Source)
         at oracle.dbtools.crest.exports.reports.RSRelationalModel.export(Unknown Source)
         at oracle.dbtools.crest.exports.reports.ReportsHandler.export(Unknown Source)
         at oracle.dbtools.crest.swingui.ControllerApplication$ExportToReportsSchema$1.run(Unknown Source)
    Does anyone know how to solve this problem?

    Hi,
    the problem is solved in latest published version (build 584). What is your version?
    If you still have issue with build 584 please provide information from log file.
    The constraint is generic if its syntax is not bound to specific database (vendor or version). So if you use syntax introduced in Oracle 10g then you have to define constraint as "Oracle 10g" related and it'll be generated for Oracle 10g and next versions of database.
    Philip

  • Performance impacts of attributes versus entities in data model design

    I'm trying to understand the performance implications of two possible data model designs.
    Here's my entity structure:
    global > the person > the account > the option
    Typically at runtime I instantiate one person, one account, and five option 's.
    There are various amounts determined by the person's age that need to be assigned to the correct option.
    Here are my two designs:
    Design one
    attributes on the person entity:
    the person's age
    the person's option 1 amount
    the person's option 2 amount
    the person's option 3 amount
    the person's option 4 amount
    the person's option 5 amount
    attributes on the option endity:
    the option's amount
    supporting rule table:
    the option's amount =
    the person's option 1 amount if the option is number 1
    the person's option 2 amount if the option is number 2
    the person's option 3 amount if the option is number 3
    the person's option 4 amount if the option is number 4
    the person's option 5 amount if the option is number 5
    Design two
    attributes on the person entity:
    the person's age
    attributes on the option entity:
    the option's amount
    the option's option 1 amount
    the option's option 2 amount
    the option's option 3 amount
    the option's option 4 amount
    the option's option 5 amount
    supporting rule table:
    the option's amount =
    the option's option 1 amount if the option is number 1
    the option's option 2 amount if the option is number 2
    the option's option 3 amount if the option is number 3
    the option's option 4 amount if the option is number 4
    the option's option 5 amount if the option is number 5
    Given the two designs, I can see what looks like an advantage for Design one in that at runtime you have less attributes (6 on the one pension member + 1 on each of 5 options =11) than Design two (1 on the one pension member + 6 on each of 5 options = 31), but I'm not sure. An advantage for Design two might be that the algorithm has to do less traversing of the entity structure: the supporting rule table finds everything for the option's amount on the option.
    Either way there is a rule table to determine the amounts:
    Design one
    the person's option 1 amount =
    2 if the person's age = 10
    5 if the person's age = 11
    7 if the person's age = 12, etc.
    Design two
    the option's option 1 amount =
    2 if the person's age = 10
    5 if the person's age = 11
    7 if the person's age = 12, etc.
    Here it looks like the rulebase would have to do more traversing of the entity structure for Design two.
    Which design is going to have better performance with a large amount of rules, or would it make a difference at all?

    Hi!
    In our experience you only need to think about things like this if you were dealing with 100s or 1000s of instances (typically via ODS). As you have a very low number, the differences will be negligible, and you should (usually) go with the solution which is the most similar to the source material or the business user's understanding. I also assume this is an OWD project? Which can be even better, since the inferencing is done incrementally when new data is added to the rulebase, rather than in one "big bang" like ODS.
    It looks like design 1 is the simplest to understand and explain. I'm just wondering why you need the option entity at all, since it seems like a to-one relationship? So the person can only have one option 1 amount, one option 2 amount etc, and there are only ever going to be (up to) 5 options...is that assumption correct? If so, you could just keep these as attributes on the person level without the need for instances. If there are other requirements for an option instance then of course, use them, but given the information here, the option entity doesnt seem to be needed. That would be the fastest of all :-)
    Either way, as the number of instances is so low, you should have nothing to worry about in terms of performance.
    Hope this helps! Write back if you have any more info / questions.
    Cheers,
    Ben

  • Needed SAP CRM Data model with Object, Entity and Attribute level details

    Hello all,
                 We are working on a huge IS-U / CRM implementation and we are still in the data gathering phase. The client has a whole load of legacy systems that will be replaced with IS-U and CRM. Right now we are in the process of developing data models using Excel first and then presenting them to the client to go forward from there. For this we need to have all the business objects, entities and their attributes.
    I know about the SD11 transaction, but we don't have a CRM system yet. My colleagues have access to a German ERP system and they were able to get models for HR, FI and Asset management. I tried for the Business partner / customer in there, but the models were not proper.
    So, once again, I need the specific data models out of SD 11 for  CRM business partner. If anybody has the information, please do pass it on to me as I need them urgently. It would be a great help if somebody can do so.
    Regards
    Rajesh

    I suggest the following:
    Please, check whether the system works if you activate the implementation BUPA_F4_AUGRP.
    In addition check the notes 559662, 674869 and 782927. Maybe the notes are already implemented but you can try then the implementation of the BADI (SE19). It should resolve your issue.
    I have implemented this Badi solution before, and after activation; the search help ; nor search result list did NOT show any Business partners anymore that had an authorization group I was not allowed to see.
    kind regards
    Davy Pelssers
    SAP CRM/Security consultant

  • Microsoft BI Semantic Model for Power View is missing in data source

    Microsoft BI Semantic Model for Power View is missing in data source type drop down when cretaing a rsds data source for powerview in sharepoint 2013

    Hi Sanjay,
    I resolved the issue.Follow the steps
    1)Go to Central Admin->System Settings->Manage Farm Solutions (Under Farm Management)
    2)Check if "powerpivotwebapplicationsolution.wsp" is there and is deployed for the webapplication under which you are creating report by verifying
    Deployed to:,if not then deploy that for your web application.
    Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem

  • New SQL Developer Data Modeler : name of attributes of foreign key

    Hi,
    with designer the name of column of foreign key was the " short name of entity/table master" + "_" + "the name of column attribute of the master table" .
    Instead in the sql developer D.M. the system uses directly the name of the column/attribute of the master table and if the name exists in the slave table it uses a number to distinguish them .
    So, if i have a table with short name gp and a primmary key id and a slave table with even a column id ,
    with the D.M i'll have in the slave table a column named id2; in the designer instead the new column is gp_id .
    Is possible to have the same behavior of designer even in the SQL Developer Data Modeler ?
    Regards
    Gianpaolo Giliberto

    Hi Gianpaolo,
    the columns of foreign keys are generated without the short name of master tablehow do you define that short name? Table and column have property "Abbreviation" - short name should be set there. You need also to set naming templates in "General Options>Naming Standard>Templates". Templates will be used when foreign key is created or you can apply them in Table dialog or for whole relational model using pop-up menu in the browser.
    no foreign key index is generated on foreign key columns I assume, you want it for DDL generation only - this is controlled in "General Options>DDL"
    Regards,
    Philip

  • Power Query 2010 missing "load to data model"

    A forum user here raised this issue.  http://powerpivotforum.com.au/viewtopic.php?f=5&t=101&p=439#p439
    the current build of Power Query for 2010 PowerQuery_2.18.3874.242 (64-bit) [en-us].msi
    seems to be missing the "load to data model" option.  I assume this is deliberate - can't imagine it was a mistake.  Why has this happened?  When will it be back?
    Matt

    Hi Matt,
    In Excel 2010 you cannot load directly to the Data Model using Power Query Add-in. You can load the data to worksheet or connection only, and then use Power Pivot to load it to the Data Model. This is why you don't see the Load to Data Model option.
    See also this
    post.

  • Missing toolbar in data model editor

    Hi,
    I just received an rdf file from one of my collegues.
    i can open the file without any problems but when i go to the data model tool i don't see any tool bar.
    it impossible to add any placeholder columns and so on without this tool bar, because i'm not allowed to add any object from the object navigator either.
    i'm allowed to delete objects though.
    tool version is reports 6.0.8.11.3
    when changing to the layout editor i see the toolbar and when i start a new report from scratch the tool bar appears.
    any help greatly appreciated.
    thanx
    kim

    having worked with reports quite a lot i wasn't aware
    that you could toggle this toolbar on and off.But I also have forms where the toolbar tunrs itself off for no apparent reason. And yes, you can turn it back on with the View menu, but that doesn't explain why it is disappearing.
    Dave

  • Data Modeler bug? - it keeps reporting missing physical model files

    Hi,
    I'm having a rather serious problem with the latest data modeler, Oracle SQL Developer Data Modeler 3.1.4.710. It keeps losing physical model files for some reason.
    I started to notice that it was not generating all the tables in my small design. After hours of struggle I found multiple error messages in the log file:
    2012-12-18 10:51:20,126 [Thread-71] ERROR XMLTransformationManager - Unable to load object from XML: C:\cygwin\home\Brian\codebase\models\data\Design\rel\395D160B-C7224B8EAD05\phys\D9582E4E-2ED963CB9D32\View\seg_0\A555DB9B-8864-9C0B-DCA8-BAC5231F55C6.xml
    java.io.FileNotFoundException: C:\cygwin\home\Brian\codebase\models\data\Design\rel\395D160B-C7224B8EAD05\phys\D9582E4E-2ED963CB9D32\View\seg_0\A555DB9B-8864-9C0B-DCA8-BAC5231F55C6.xml (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:138)
         at oracle.dbtools.crest.model.metadata.XMLToObjectTransformer.transformToObject(Unknown Source)
         at oracle.dbtools.crest.model.metadata.XMLToObjectTransformer.transformToObject(Unknown Source)
         at oracle.dbtools.crest.model.metadata.XMLTransformationManager.transformFromXMLToObject(Unknown Source)
         at oracle.dbtools.crest.model.metadata.XMLTransformationManager.openPhysicalModel(Unknown Source)
         at oracle.dbtools.crest.model.metadata.XMLTransformationManager.openPhysicalModel(Unknown Source)
         at oracle.dbtools.crest.swingui.browser.BrowserPanel$88.run(Unknown Source)
    These messages appeared every time I opened my physical model (Oracle 10g).
    After deleting and recreating the physical model the problem went away for a while. But after closing and reopening the design I started to see the errors again.
    Has anyone seen something similar?
    Regards,
    Brian

    Thanks Philip!
    The workaround does the trick for the tables, primary keys and unique keys.
    I have just observed that table level constraints show a slightly different behaviour.
    Names show up like TCC5, TCC6, etc.
    Seems the same problem as previously in SQL*Modeler forgets check constraint names
    Is there a workaround for that problem too ?
    I already noticed that there is no parameter NameChanged for a table constraint.
    Enrico

  • Getting Error when creating Data Model off OBIEE Analysis

    Hi,
    Our BI Publisher is integrated with OBIEE. I am developing BI Publisher report from existing obiee analysis. I am getting error when selecting existing analysis for data Set. Following error gets appear when pressing ok after selecting BI analysis
    oracle.xdo.XDOException: oracle.xdo.XDOException: oracle.xml.parser.v2.XMLParseException: '=' missing in attribute.
    I have done some debugging and it seems error is appearing due to presence of dimensional hierarchy in the analysis. If I remove dimensional hierarchy column from the analysis, this error goes away and I am able to save data model and gather sample XML.
    Any idea how to handle dimensional hierarchy column in BI Publisher data set?
    Thanks & Regards

    Hi,
    I got this response from Oracle
    “Sorry, this is not supported. If the BIEE Analysis has hierarchy columns then BIP cannot use it as a datasource.”

  • Does SQL Developer Data Modeler fit-in??

    Hi Everyone,
    Wish you happy new year 2011.
    Does SQL Developer Data Modeler support conceptual, logical and physical in our modeling or only logical and physical?
    We all use Erwin for modeling. Erwin works without database repository storing models in desktop folders and provide additional reporting. I find some place SQL Developer Data Modeler talked about repository need.
    Does SQL Developer Data Modeler store the models in local/network folders instead of Database server?
    What are the functions need database based repository to work with SQL Developer Data Modeler?
    We are thinking of using SQL Developer Data Modeler for our conceptual, Logical, and data dictionary need. Will it help in our need?
    Do we need to face any surprises on using SQL Developer Data Modeler for our need?
    Thanks in sharing your experience and helping me out.
    RI

    1) Do we need to have Oracle database at back end to work with SQL Developer Data Modeler?No, Data Modeler use Oracle database only if you create reporting repository.
    Data Modeler is free, you need database license only if you want to log service request
    2) Will SQL Developer Data Modeler create any tables (as backend repository ) in Oracle database to store Model details? no
    3) Do we need to create reporting schema in backend oracle database to generate reports of SQL Developer Data Modeler's items such as Entity/attributes etc?no, reports can be created out of current loaded design. However having reporting repository will give you additional benefits - history (reports can be generated for every snapshot of your designs there) and multi-user usage, you can create your own reports
    4) Do we to use SQL Developer Data Modeler reverse engineer from DB2, SqlServer, Terra data etc?Data Modeler has full support for Oracle, DB2/390, DB2/UDB(LUW) and MS SQL Server. Reverse engineering from other databases (including Terra Data) is at generic JDBC level - you'll get some and some will be missing (no check constraints for example).
    You can read release notes http://www.oracle.com/technetwork/developer-tools/datamodeler/ea2-releasenotes-185793.html
    Philip

  • Data Modeler - Naming Conventions

    I was using Oracle Designer for several year.
    This product could drive you crazy because sometimes, but the strength was in my opinion the datamodelling part.
    It saved you a lot of time because you kept stuck to the logical model generated your relational model and had all scripts satisfying all naming conventions you needed.
    In Data Modeler i really miss the naming conventions and can't understand some parts, sometimes somebody here can help me if i have overseen something or it is just not implemented.
    Naming conventions as example:
    We work with surrogate keys.
    Two well known tables - Employees (abbreviation EMP), Departments (abbreviation DEP)
    They have one relation 1:N one department has many employees
    In Designer i would define the EMPLOYEE entity, would set the table-abbreviation, the attributes and the primary key.
    The same with DEPARTMENT. I would design it WITHOUT any column for the foreign key constraint.
    Then i would create a relation between this two tables.
    Last step is to generate the relational model.
    a) Designer automatically adds ID as surrogate key on every table (you could configure that, it was dependent on a domain)
    b) it automatically adds the table abbreviation as prefix on every column (even here it's configurable)
    c) it automatically adds the a foreign key column in the child table with the prefix of the master table (f.e. EMP_DEP_ID or DEP_ID if you prefer not to prefix every column... what i do)
    It was really easy to get your scripts.
    Things i don't understand in Data Modeler:
    In a logical model you should design entities, attributes and relations and don't mess around with FK-columns.
    Is there any support for surrogate keys? I don't wanna add an ID manually with every table.
    In Data Modeler an additional COLUMN(!) is added with every Foreign key relation, i could live with that, but there is no way to tell
    Data Modeler to prefix it automatically. The name can just be changed in the Relational View afterward.
    P.S.
    Surrogate Keys.... There are some pros and cons for/against this out there. I have seen a lot of Oracle Projects and in all except one i always had a surrogate key column. It really makes life
    easier. In the one no-surrogate-key-project we began to add surrogate keys after a while...

    COLUMN(!) is added with every Foreign key relation, i could live with that, but there is no way to tell
    Data Modeler to prefix it automaticallyLook at "General options>Naming Standard>templates" - you can define template for FK columns/attributes and then apply them for whole relational/logical model using "Apply Naming .." functionality from pop-up menu in the browser. For Logical model (FK attributes) - you also need to clear related setting at "General options>Logical>Keep as the name of originating attribute".
    Templates are also used when objects are created, thus when new FK is created, then templates are used to generate name for foreign key and FK columns. Well you have to define table and column abbreviation in order to get them used in generated names - Re: Data Modeler: Naming
    There is no support for surrogate keys in current release.
    Philip

Maybe you are looking for