Attribute QUEUE_NAME is initial Error

Hallo,
when I´m calling an BAPI over RFC and with QoS=EOIO then the following error occure:
Result:
<SAP:Error>
<SAP:Category>XIServer</SAP:Category>
<SAP:Code>INTERNAL.ATTRIBUTE_INITIAL</SAP:Code>
<SAP:P1>QUEUE_NAME</SAP:P1>
<SAP:Stack>Attribute QUEUE_NAME is initial</SAP:Stack>
</SAP:Error>
I made the RFC-Destination with the correct SAP-System; must i create a queue for this destination? And when yes how i can do this? I need an outbound-queue - yes?
Thanks in advance,
Frank

Did you register your queues ? Go to SXMB_ADM -> Manage Queues and register your queues. If this does not work, delete the queues and register them again using the same transaction SXMB_ADM -> Manage Queues
regards
SKM

Similar Messages

Attribute Manifest is Initial Error

Hi all.
I have a scenario, HTTP To Proxy.
All these days the scenario was working fine in Prod.
Now there was a strange error like below.
Attribute Manifest cid:att-afca9240544511e092426ad000004002(@)sap.com is initial
Error category: Internal (in Moni)
Any s

Implemented the SAP Note: 1501345
Problem resolved.

Attribute QUEUE_NAME is Initial

Hi All,
My Scenario is Webservices-XI-BW...
While sending data from webservices the response i get is QUEUE_NAME is initial... this i am getting since i am using QOS--EOIO,
I have gone through weblog /people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
but i could not solve my problem....
So can any one let me know how to make this solve...
Regards,
Sridhar Reddy

Sridhar,
Please go through the Note: 856597
and the blog /people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
-Naveen.

QUEUE_NAME is initial Frank Schmitt cau u give the solution?

Hi Frank,
My Scenario is Webservices-XI-BW...
While sending data from webservices the response i get is QUEUE_NAME is initial... this i am getting since i am using QOS--EOIO,
Can u tell me how u have solved this solution which u posted in sdn long back...
Result:
<SAP:Error>
<SAP:Category>XIServer</SAP:Category>
<SAP:Code>INTERNAL.ATTRIBUTE_INITIAL</SAP:Code>
<SAP:P1>QUEUE_NAME</SAP:P1>
<SAP:Stack>Attribute QUEUE_NAME is initial</SAP:Stack>
</SAP:Error>
I am also getting same error ...
please can u let me know how u have solved this
Regards,
Sridhar
Message was edited by: sridhar reddy kondam

Hi Michael,
Thanks for u r reply,
I am not using Soap Adapter, I am using XI adapter, and followed the Doc how to send XML data to BW using the doc
http://service.sap.com/~sapidb/011000358700011142902001E/HOWTOSENDXMLDATATOBW.DOC
My scenarion is XI-BW integration.
Here I am trying to send XML data as mentioned in the doc.. i can see the messeges if i give the QOS as EO but if i give EOIO then the said response i am getting...
Request u to give solution or suggestion...
Regards,
sridhar

'dimension attribute was not found' error while refresing the cube in Excel

Dear All,
Thanks for all your support and help.
I need an urgent support from you as I am stuck up here from nearly past 2-3 days and not getting a clue on it.
I have re-named a dimension attribute 'XX' to 'xx' (Caps to small)in my cube and cleared all dependencies (In Attribute relationship tab as well).
But while refreshing the data in excel client (of course after processing the full cube) I get an error
'Query (1, 1911) the [Dimension Name].[Hierarchy Name].[Level Name].[XX] dimension attribute was not found' error.
Here I am trying to re-fresh an existing report without any changes with the new data.
Does not it re-fresh automatically if we clear the dependencies or there something that I am missing here (Like order of the dependencies).
Cube processed completely after modifications and able to create new reports without any issues for same data. What else could be the reason?
Can some one help me here?
Thanks in Advance and Regards,

Thnaks alot Vikram,
In se11 ,when i was trying to activate the /BIC/FZBKUPC , it is showing the warnings like
Key field KEY_ZBKUPCP has num. type INT4: Buffering not possible, Transport restricted.What it means.
In PErformance Window it is showing like:
A numeric type was used for a key field. A table of this sort cannot be buffered.When buffering, the table records for numeric values cannot be stored in plain text.
Procedure
You can enter "no buffering" as an attribute of the technical settings and then repeat the activation process. The table is not buffered.
If you want to buffer the table, you must replace the type in the key field by a character type, i.e. that you must modify the table.
Please adivice with your valueable suggestyions.
Thanks Vikram.

Attribute for user contains errors. Inform system admin

Hello,
We've got an issue with shopping carts created by a user that was deleted from system. When trying to see in Monitoring Shopping Carts header or item details of a given sc. A web error occurs:
The URL http://srp.srm.gruposalinas.com.mx:8000/sap/bc/gui/sap/its/bbpsc11/! was not called due to an error.
Note
The following error text was processed in the system SRP : Attribute for user contains errors. Inform system admin.
The error occurred on the application server srm-pro_SRP_00 and in the work process 2 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
We've cheked SAP NOTE 312058-BBPPU99: Error: Attribute for ... is missing. Inform ...
But it seems that none of the information applies to us, since this issue is only present for Shopping carts that were created by this deleted user.
So we tried to re-assing one of this sc, chaning PARTNER_NO,ADDR_NR
ADDR NP data in table CRMD_PARTNER according to a new given user, but it didn't work. So we need to know how to re-assing this sc or perhaps how to find what specific attribute is missing.
Any advice is welcome.
Thanks in advance.

Hi
Which SRM version are you using ? This is an SRM error message.
The manager role should be enough to change user attribute. The transaction is BBPATTRMAINT. Employee role should have BBPUM02 or BBPAT05 to change their own attribute.
Please check whether the User ID you are using to Log into BBP_PD (and seems to be assigned in the org structure also)is consistent and has no errors in tcode USERS_GEN. You should check the user, it's not set up properly in USERS_GEN Transaction, Else repair the user.
To maintain the user attributes you must have the Administrator role.. Your user should have role SAP_BBP-STAL_ADMINISTRATOR and be integrated in the org structure. your user must be integrated in SRM organizational structure. To see which attributes are missing, you can click on the user in PPOMA_BBP to see details, and go to last tab "Check". This will list all required attributes depending on used scenarios (so you may not require all of them). You can also use transaction BBP_ATTR_CHECK to check user's attributes for a particular scenario.
Please go through the following links as well ->
bbp_mon_sc attributes
Re: FM for attribute's value assignation in PPOMA ?
Note 751022 - Monitor Shopping Cart: Item deletion causes termination
Re: User Settings are not saved
Re: Not able to generate user users_gen
Re: SRM organization plan...
Re: User creation error
Hope this will definitely help. Do let me know.
Regards
- Atul

Attribute out of range error with Dalsa Spyder camera

I have a Dalsa Spyder camera SG-11 which seems to work fine in NI MAX. I've also had this camera working successfully in a LabView vi but now, for some reason, I am getting an error message "Attribute out of range (-1074360302)".
I've tried using different gain values (since MAX sometimes gives an attribute out of range error relating to gain) but am not having much success.
Has anyone else experienced this problem and found a work around?
Lightworker

Hi LightWorker,
I've not seen this probelm specifically with Dalsa Spyder SG-11 cameras but there are several KnowLedge Base Articles on the error for various differnt models of camera. It may be that one of these fixes will apply to your camera as well.
How Do I Resolve "Error: 0xBFF69012 Attribute value is out of range” When Connecting to a GigE Camer...
Why do I get Error 0xBFF69012 "Attribute Value is Out of Range" with my Basler GigE Camera?
Stingray Camera & NI LabView / Vision Builder Error -1074360302 "Attribute is out of range"
Please let us know if any of these solve your issue.
Kind regards,
James W
Controls Systems Engineer
STFC

How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized

How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized. Do the actual trigger lines get measured or does the attribute get initialized to a default value when the vxi resource manager is executed?

Hey whl6868,
According to page 157 (or 3-135) of the manual (http://www.ni.com/pdf/manuals/370132c.pdf), there is no default value for VI_ATTR_VXI_TRIG_STATUS. If Resman is returning valid values for it, then it must be actually reading the lines. Else, I would only expect it to return valid values when you actually call the function yourself.
Regards,
David R
Applications Engineer
National Instruments

Variable mois might not have been initialized error help

String mois;
 switch (month)
 case 1:
 mois = "January";
 break;
 case 2:
 mois = "February";
 break;
System.out.println (mois);
after compiling im getting this error.....variable mois might not have been initialized.....I don't know what it is....can somebody help???

int month = keyboard.nextInt ();
 if (month >= 1 && month <= 12)
 else
 System.out.println ("Error: invalid month. Must be in the range [1,12]");
String mois;
 switch (month)
 case 1:
 mois = "January";
 break;
 case 2:
 mois = "February";
 break;
 case 3:
 mois = "March";
 break;
 case 4:
 mois = "April";
 break;
 case 5:
 mois = "May";
 break;
 case 6:
 mois = "June";
 break;
 case 7:
 mois = "July";
 break;
 case 8:
 mois = "August";
 break;
 case 9:
 mois = "September";
 break;
 case 10:
 mois = "October";
 break;
 case 11:
 mois = "November";
 break;
 case 12:
 mois = "December";
 break;
System.out.println (mois);
what is wrong with this then??? im getting the initialized error with the output of mois........

Initial error occurred during generation of the transformation

HI experts
here i am loading master dat using 7 that ds is in 3.x when i do rt click on the ds it
is asking for the transfer rules to be installed and after that rt click create transformations then "Initial error occurred during generation of the transformation rstran 667" his error is coming
can anybody help me in this
regards
anand

Hi Anand
May be you have not maintained the infosource.
Create one infosource by using data source in transformation.
Better you migrate to 7.0 data source and try to use.
Update me, still if you had any problems
Regards
Saravanan.ar

Variable might not have been initialized error in an assignment for school

Hello All... I am very new to Java (started class about 2 weeks ago) and my current assignment has me a bit stumped on what I am doing wrong. I have put the code in this message for everyone to take a look at and offer advice or point me in the right direction on what I missed a step on. I appreciate any help you can offer.
The error is coming on line 39:
* Program: MathProgramExtra
* Author: Michael Stewart
* Date: August 22, 2010
* Program Purpose: This program is intended to display selection and iterative statements.
import javax.swing.*;
public class MathProgramExtra
 public static void main (String[] args)
 Object[] mathPossibilities = {"+", "-", "*", "/", "%"};
 Object[] firstintegerPossibilities = {"0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10"};
 Object[] secondintegerPossibilities = {"1", "2", "3", "4", "5", "6", "7", "8", "9", "10"};
 Object[] options = {"Yes, Please", "No, Thank You"};
 String m;
 String f;
 String s;
 int firstint;
 int secondint;
 int answer;
 char ans = 'Y';
 while(ans !='N')
 System.out.println("ans in beginning of loop is :"+ans);
 m = mathOp(mathPossibilities);
 f = firstNum(firstintegerPossibilities);
 s = secondNum(secondintegerPossibilities);
 firstint = firstNumConversion(f);
 secondint = secondNumConversion(s);
 performMath(m, firstint, secondint);
 add(m, firstint, secondint);
 subtract(m, firstint, secondint);
 multiply(m, firstint, secondint);
 divide(m, firstint, secondint);
 modulus(m, firstint, secondint);
 printMath(answer);
 ans = verifyAnswer(options);
 System.out.println("ans in end of loop is :"+ans);
 if (ans == 'Y')
 continue;
 else
 break;
 System.exit(0);
 public static String mathOp(Object[] possibilities)
 String sentence = "Please select a mathematical operation";
 String m = (String)JOptionPane.showInputDialog(null, sentence, "Operation Question",
 JOptionPane.PLAIN_MESSAGE, null, possibilities, "+");
 return m;
 public static String firstNum(Object[] possibilities)
 String sentence = "Please select an integer";
 String f = (String)JOptionPane.showInputDialog(null, sentence, "First Integer",
 JOptionPane.PLAIN_MESSAGE, null, possibilities, "0");
 return f;
 public static String secondNum(Object[] possibilities)
 String sentence = "Please select another integer";
 String s = (String)JOptionPane.showInputDialog(null, sentence, "Second Integer",
 JOptionPane.PLAIN_MESSAGE, null, possibilities, "1");
 return s;
 public static int firstNumConversion(String f)
 int firstint = 0;
 if(f.equals ("0"))
 firstint = 0;
 else if(f.equals("1"))
 firstint = 1;
 else if(f.equals("2"))
 firstint = 2;
 else if(f.equals("3"))
 firstint = 3;
 else if(f.equals("4"))
 firstint = 4;
 else if(f.equals("5"))
 firstint = 5;
 else if(f.equals("6"))
 firstint = 6;
 else if(f.equals("7"))
 firstint =7;
 else if(f.equals("8"))
 firstint = 8;
 else if(f.equals("9"))
 firstint = 9;
 else if(f.equals("10"))
 firstint = 10;
 return firstint;
 public static int secondNumConversion(String s)
 int secondint = 0;
 if(s.equals("1"))
 secondint = 1;
 else if(s.equals("2"))
 secondint = 2;
 else if(s.equals("3"))
 secondint = 3;
 else if(s.equals("4"))
 secondint = 4;
 else if(s.equals("5"))
 secondint = 5;
 else if(s.equals("6"))
 secondint = 6;
 else if(s.equals("7"))
 secondint =7;
 else if(s.equals("8"))
 secondint = 8;
 else if(s.equals("9"))
 secondint = 9;
 else if(s.equals("10"))
 secondint = 10;
 return secondint;
 public static int performMath(String m, int firstint, int secondint)
 int answer = 0;
 if (m.equals("+"))
 answer = add(m,firstint, secondint);
 if (m.equals("-"))
 answer = subtract(m,firstint, secondint);
 if (m.equals("*"))
 answer = multiply(m,firstint, secondint);
 if (m.equals ("/"))
 answer = divide(m,firstint, secondint);
 if (m.equals ("%"))
 answer = modulus(m, firstint, secondint);
 return answer;
 public static int add(String m, int firstint, int secondint)
 int answer;
 answer = (firstint + secondint);
 return answer;
 public static int subtract(String m, int firstint, int secondint)
 int answer;
 answer = (firstint - secondint);
 return answer;
 public static int multiply(String m, int firstint, int secondint)
 int answer;
 answer = (firstint * secondint);
 return answer;
 public static int divide(String m, int firstint, int secondint)
 int answer;
 answer = (firstint / secondint);
 return answer;
 public static int modulus (String m, int firstint, int secondint)
 int answer;
 answer = (firstint % secondint);
 return answer;
 public static void printMath(int answer)
 String message = "Your answer is:" + answer;
 JOptionPane.showMessageDialog(null, message, "Alert", JOptionPane.INFORMATION_MESSAGE);
 public static char verifyAnswer(Object[] options)
 char ans = 'N';
 int n = JOptionPane.showOptionDialog(null, "Would you like to enter another problem, Yes or No?", "Another Problem?", JOptionPane.YES_NO_OPTION, JOptionPane.QUESTION_MESSAGE, null, options, options[1]);
 switch(n)
 case 0:
 ans = 'Y'; break;
 case 1:
 ans = 'N'; break;
 return ans;


mstew1979 wrote:
Thank you! I actually just got it working :)Cool. Here's a bit of advice, just in case you "fixed" it by making a common mistake: Don't just initialize a variable to a dummy value to make the compiler happy. Those "not initialized" errors usually point to a logic error. But just initializing the variable to 0, null, etc. at declaration, usually you're just masking the logic error so the compiler doesn't see it. You haven't fixed anything.
public String signum (int x) {
String result;
if (x > 0) {
 result = "positive";
else if (x < 0) {
 result = "negative";
return result;
}Here we have a compiler error, brought on by my logic error of forgetting to account for x being 0. The wrong way to fix it would be to blindly change the declaration of result to String result = ""; or == null;. The logic error is still there, but now it's hidden from the compiler. So we have an error at runtime instead--we don't get a valid response if we pass in 0. Runtime errors are much harder to debug than compile-time errors.
The correct response to the compiler's "not initialized" error is to look at our code more carefully and see what we might have missed. In this case, we would add and else clause that returns "zero".

ORA-29786: SIHA attribute GET failed with error [Attribute 'ASM_DISKSTRING'

Hi,
I un-register below services to configure them with solaris SMF (I know oracle won't support SMF yet).
they are running quite good, but only issue we are facing was RBAL create error logs in trace file.
/u01/grid/oracle/product/11.2.0/asm_1/bin/crs_unregister ora.LISTENER.lsnr
/u01/grid/oracle/product/11.2.0/asm_1/bin/crs_unregister ora.DATA.dg
/u01/grid/oracle/product/11.2.0/asm_1/bin/crs_unregister ora.FRA.dg
/u01/grid/oracle/product/11.2.0/asm_1/bin/crs_unregister ora.asm
Errors in file /u01/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_rbal_14028.trc:
ORA-29786: SIHA attribute GET failed with error [Attribute 'ASM_DISKSTRING' sts[200] lsts[0]]
KGGPNP_SIHA: resource 'ora.asm' is not available [200]
KGGPNP_SIHA: attribute 'ASM_DISKSTRING' get failed sts[200] lsts[0]
NOTE: failed to discover disks from gpnp profile asm diskstring
ORA-29786: SIHA attribute GET failed with error [Attribute 'ASM_DISKSTRING' sts[200] lsts[0]]
WARNING::lib=/opt/oracle/extapi/64/asm err:9 rc:opendir location:skgdllOpenDi
errbuf=2
msgbuf=No such file or directory other=Directory does not exist
*** 2011-03-22 11:23:02.281
kfgbRegister: registering group 1/0xB9966B09 (DATA)
kfgbBind: binding kfgpn for group 1/0xB9966B09 (DATA)
kfdp_query(DATA): 7 Edited by: Sachin B on Mar 28, 2011 3:17 AM

Hi, it seems this errors comes from the fact that the asm wasn't registred in the cluster.
so you have ti recreate the asm instance and register this instance in the cluster.
srvctl add asm -p $ORACLE_HOME/dbs/init$+ASM.ora
srvctl config asm
i hope it could help !
Huet Bruno
Senior DBA Brinks France.

'CRT not initialized' error after installing MS Office 2010

Hi,
I encountered 'CRT not initialized error' after installing MS Office 2010. I think that with previous version of CVI there were no problems. But, with Labwindows/CVI 2012 error has outbroken. The details are as follows.
- OS : windows 7 Enterprise (32bit)
- Labwindows/CVI (v12.0.0 (422))
- MS Office 2010 (word, powerpoint, excel)
#1. clean install windows 7 (32 bit)
#2. install Labwindows/CVI v12.0.0 and device drivers (DAQ, Motion)
#3. compile and run attached test program : SUCCESS
#4. online update windows 7 (service pack, explorer 9, and etc)
#5. compile and run attached test program : SUCCESS
#6. install MS Office 2010
#7. compile and run attached test program : 'CRT error'
#8. uninstall MS Office 2010
#9. compile and run attached test program : SUCCESS
I think there are some conflicts between office 2010 and labwindows v12.0.0. How can I solve this problem?
Thank you in advance.
Attachments:
step7-CRT error.jpg ‏31 KB
test program.zip ‏3305 KB

More specifically, I decided that some parts of MS Office files and features of NI's motion library conflicts. Because in the attacted sample program, if I exclude NI-Motion functions then the program excutes nicely. But if I include NI-Motion fucntion, for example flex_select_signal, then the 'CRT not initialized' error occurs.
To solve this problem I tried step by step installation check for MS Office 2010. During each step I included more optional features in MS Office and after each installation I compiled and executed my sample program. At finally, I found that the addtional part of MS Office 2010, if I install Office Sharing Function>Microsoft IME(Korean), then the 'CRT not initialized' error occurs.
Temporarly, I solved the problem with NOT installing 'Office Sharing Function>Microsoft IME(Korean)' optional feature in the MS Office 2010.
Could you tell me why this problem occur?

Error 2100: HDD0 initializing error (1)

Hello.
I have W510 and change a standart HDD to SSD Corsair Force F240. And allready second time today have an error while power on:
error 2100: HDD0 initializing error (1)
how i can fix it? thanks
Stas.

This definitely appears to be a hard drive issue, possibly linked to the firmware or OS settings.
On a T410 and a refurbished Western Digital Scorpio Black 320 GB the system ran fine (Win 7 Pro), *but* at some times would get that error on boot. Either rebooting or switching from ACHI to Compatibility mode would correct the issue, but never permanently. That T410 never has any issue with other drives.
This seems to be a timing issue with the HD being recognized in time: sometimes just hitting the Thinkvantage blue button at startup is enough to get the drive to be recognized. This may also be why changing from ACHI to Compatibility helps.
So my take is to *just* try another hard drive first, possibly cloning it on another system where it is recognized. And WD refurbished no more for me. It was a poisoned gift.
Asus LG5, Toshiba M3, HP nc4400, Thinkpad R50, T60, T61, T61p, X200 Tablet, T410, W500, T430s

Initial Error during Real-time control

Hello all,
I am currently controlling a DC motor in real time by using an simple PI controller.
Unfortunately, I found that there is some initial error when the desired motor speed (which i desired) is zero, the error signal come from the actual DC motor is oscillating at -3.
What should i do in order to make the initial signal to zero?
Thank you very much.

Ok barp, i had work out for many scale (-0.1, 0.01, 0.1, 0, 1, 2, 10, 100, 500, 1000, 2000, 3000) and i will show you here. P/S: Red color= Actual motor speed, Green color= Setpoint(desired Speed), and the white color= controller signal.

Attribute QUEUE_NAME is initial Error

Similar Messages

Maybe you are looking for