Attributes in admin interface different than in Debug page

Hello everyone,
I'm facing an issue on how to update attributes on the admin interface to reflect the same on the debug page. On the admin interface, when I lookup a user's attributes under the Attributes tab, I see their old attributes eg. user status-T,jobcode- xxxx, user type - contractor. But when I lookup the same user in the Debug page, I see the new values reflected eg. user status-A(active), user type- EMP. This is happening for selected users only where they have changed from a contractor to an employee.
Can anyone suggest how to update the values to ensure both are the same? Has anyone done this?
Your help is much appreciated. Thank you.

Similar Messages

BIP (OBIEE 11.1.1.7.1): Different Headers on 1st page, middle pages, same header on last page as 1st page

Hello,
This is a much discussed topic but I still couldn't find a resolution.
The report I am trying to convert from Oracle Reports is an Invoice. The requirement is as follows:
On Page 1 The full header including company logo, bill-to, ship-to address, invoice number etc. Standard Invoice header stuff should print 1st page.
Page 2 andl subsequent pages should print a scaled down version of the above header to conserve space (and paper)
Last Page should have the Invoice Summary.
In case of a multiple page Invoice this setup works just fine. I have followed examples available in userguide as well as on the web. Used Different First Page option, created section break so that header on first page can be different than on subsequent pages.
PROBLEM:
The issue is that in case of a single page invoice, it prints with the scaled down header, invoice details and summary.
The requirement is that for single page invoice, the Full header and summary appear. I have put <?start@last-page-first:body?> <?end body?> so that the summary appears on the single page invoice but the FULL header does not.
I have tired to follow (http://winrichman.blogspot.com/2008/08/different-page-header-and-footer.html) but it doesn't seem to work.
How can I create the necessary breaks in Word so that I get Full header on 1st page, scaled down header on other..pages and in case of Single Page Invoice, include FULL header and Summary on one page?
Thanks,
Manish

Hi Tim,
Forgot to mention that there is also a 3rd page which needs to display Part 3 and a different header text which is not something from page 1 or 2.So I guess the even/odd pages in page setup wont work as the 1st page header will be displayed on the 3rd page which is not what is expected.
I think this is not achievable in MSWord. Is this possible if I use a PDF template?
Ashwini.

SSM 7 - How to create more than 100 standard KPIs on admin interface?

Good day all,
Has anybody successfully increased the the number of standard kpis that can be created in the Admin inteface to greater than 100 standard kpis?
I have followed the instructions on page 39 of the 'Server configuration guide for SAP Strategy Management for sp 2 or higher' pdf to modify the
kpi limits but I still get a popup on the Admin interface telling me that only 100 standard kpis can be created when I try to add the 101th kpi.
btw the procedure in the pdf mentioned above refers to changing the scorecard.pro file but in this file the wording for a kpi i.e.
'&$KP99PARAM0STD' is not the found but the wording "P" is use instead of "PARAM". In the file jscorecard.pro the wording "PARAM" is used.
I have adding 100 extra parameters to these files. But I still get the restrictions of only creating 100 kpis as mentioned above.
Please assist in this matter.
Thanks in advance,
T

Hi Taariq,
In the same server config guide, please check the section about Modifying the Objective Limits. The parameter you have to change here will influence both the Objective and KPI limits. Unfortunately this is not stated in that document yet...
So in addition to the steps you have already implemented, try changing this property!
Best regards,
Ricardo Vieira

After release the release version different than debug version ????

Hello guys,
I am having a HUGE issue with my release build version of my application, when i run my application through eclipse it runs perfectly, however after making a release build of the application and running it behaves different than the version run from eclipse ???????? has anyone ever had this problem before and if so what can you do to prevent this behavior. thank you for any advice on this issue

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
<b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
Please report back to see if this helped you!
Thank you.

ESSO PG on something different than MS AD

Is it possible to make PG (from 11.1.1.5.1 ESSO distro) functional on something different than MS AD, like ADAM? I deployed the ADAM, LM and PG (both client and server). LM works successfully and (after first sync) created ADAM nodes (of class vGOUserData) in OU=People,dc=domain,dc=local container. Keeping in mind that (in MS AD case) for PG to add user logon I should first manually create user and only after that use "Add New SSO User" link. So, I manually created two semi-empty nodes of class vGOUserData too ("semi-" - due to lack of data to put in very special attributes, including encrypted ones). After selecting "Manage SSO Users" - "Find User(s)" PG successfully shows me all created users (both from LM and manually created). But when I try to add new logons (no difference, for "LM" or "manual" user entries) PG shows me error message saying that "System.DirectoryServices.ActiveDirectory.ActiveDirectoryObjectNotFoundException: The local computer is not joined to a domain or the domain cannot be contacted". What's wrong with it (ADAM & PG are deployed on standalone Win2K3 Server)?

Update: seems that ESSO PG simply doesn't works on LDAP servers other than MS AD. It doesn't works at all. I tested it on ADAM and DSEE. Problems with ADAM are difficult to research, because traffic is protected via GSS-API, so I simply can't sniff network traffic as it encrypted. But as for DSEE, problems are described below:
Documentation (Oracle® Enterprise Single Sign-on Logon Manager Best Practices: Deploying ESSO-LM with an LDAP Directory Release 11.1.1.5.0 E21003-01) says about locator object: +"You must create the vGOLocator object at least at the same level as the container that holds user accounts. Ideally, vGOLocator should exist inside the directory’s user accounts container"+. So I created LDAP structure as shown below:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-ou=vgoLocator
|---(+)-ou=ESSO
|---------(+)-ou=People
|---------(+)-ou=SSOConfig
As you can see, structure looks quite correct: vgoLocator "ideally exist inside the directory’s user accounts container", right?
Than I setup application templates, filled LM settings (via LM Administrative Console), wrote them into registry hive and published all those settings into LDAP (DSEE). It works correctly and LDAP structure now looks like that:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-uid=ESSO.Administrator (created manually)
|---------(+)-ou=vgoLocator
|---(+)-ou=ESSO
|---------(+)-ou=People
|--------------(+)-cn=ESSO.Administrator (created by LM while performing LDAP sync)
|---------(+)-ou=SSOConfig
|--------------(+)-ou=2c58e3b2-320a-4ed2-a708-90065620e5d1 (created by LM admin console while publishing settings into LDAP)
OK, now LM works perfectly, but we want to create centralized system, right? So I had to deploy PG. It was deployed and started. The first task was to correctly fill storage settings. I used values as shown below:
Storage Type: Oracle Directory Server Enterprise Edition
Server: esso.hq.domain.local:1389
Root DN: dc=domain,dc=local
User Path: ou=Users,dc=domain,dc=local
Connect as User: cn=Directory Manager
Password: **********
Use secure connection (SSL): no
Use configuration objects instead of application list: yes
Role/Group support: no
Configuration and role/group objects root DN: ou=SSOConfig,ou=ESSO,dc=domain,dc=local
Admin Group DN:
User PrePend: UID
Config looks OK, isn't it?
But when I tried so save settings, I got error "Cannot find any configuration objects". Metalink shows me two articles on this problem: 1305060.1 (says that i must not use space in Configuration and role/group objects root DN). Can you see any spaces in "ou=SSOConfig,ou=ESSO,dc=domain,dc=local" string? Next article was 1298762.1 that says that "This is because the container you have listed in the Storage Setting titled 'Configuration and role/group objects root DN:' does not contain any ESSO objects such as templates or password policies". But that container really contains ESSO objects (three, to be more precise), so that wasn't the solution too.
OK, let's look in depth... I installed wireshark and captured network traffic from PG to LDAP. There was four LDAP-related calls:
1. PG searches object ou=vgoLocator,dc=domain,dc=local. LDAP says "no such object" (of course, because we read documentation and created locator in "ideal" container - inside Users container). WHY? WHY it tries to find it there???
2. PG searches LDAP for dc=domain,dc=local. LDAP says "OK"
3. PG searches LDAP for ou=Users,dc=domain,dc=local. LDAP says "OK"
4. PG searches LDAP for ou=SSOConfig,ou=ESSO,dc=domain,dc=local. LDAP says "OK"
That's all. No more LDAP requests, PG simply throws an error as shown above.
"OK" - said me to myself, let's create locator at the position, where PG expects it to find, i.e. at ou=vgoLocator,dc=domain,dc=local. Wow! PG now accepts settings entered earlier and I almost become happy. LDAP now looks like that:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-uid=ESSO.Administrator
|---(+)-ou=ESSO
|---------(+)-ou=People
|--------------(+)-cn=ESSO.Administrator
|---------(+)-ou=SSOConfig
|--------------(+)-ou=2c58e3b2-320a-4ed2-a708-90065620e5d1
|---(+)-ou=vgoLocator
So, let's play with users, yeah? Let's click on "Manage SSO Users" and have some fun? But PG tells me "Invalid storage settings" error... WTF??? OK, let's start network sniffer again and look, what's happened. Oh-oh... Wireshark shows me that PG tries to logon onto LDAP using credentials "UID=ESSOPG\SVC_SSO,OU=USERS,DC=DOMAIN,DC=LOCAL" and LDAP declines authentication requests. BTW, ESSOPG\SVC_SSO is a local user, used (according to documentation, of course (looks like it's now my favorite phrase)) by IIS as anonymous user. WHY??? Why PG uses that user instead of "cn=Directory Manager", that I entered into storage settings five minutes earlier???
OK, if PG wants that user, let's create him in LDAP, yes? So I created such an user in LDAP and now it looks like that:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-uid=ESSO.Administrator
|---------(+)-uid=ESSOPG\SVC_SSO
|---(+)-ou=ESSO
|---------(+)-ou=People
|--------------(+)-cn=ESSO.Administrator
|---------(+)-ou=SSOConfig
|--------------(+)-ou=2c58e3b2-320a-4ed2-a708-90065620e5d1
|---(+)-ou=vgoLocator
Test with LDAP browser shows that I can access LDAP using that newly created user. Just one thing: according to LDAP rules, I have to use double slashes in logon name: "uid=ESSOPG\ \SVC_SSO,OU=USERS,DC=DOMAIN,DC=LOCAL". But PG doesn't know anything about such a rule and simply passes "uid=ESSOPG\SVC_SSO,OU=USERS,DC=DOMAIN,DC=LOCAL" (with one slash) to LDAP. LDAP declines auth request. What to do now? Eureka! Let's enter two slashes directly into PG settings! So, let's go to "Web Service Account" page and add one more slash into "User Name" field. Now it contains value "essopg\ \svc_SSO". Cursor moves to "Save" button, clicks on it....
PG shows me an error message: "Please enter the User Name in format "domain\userid".".....
I surrender. I have more than fifteen years experience in software development and information security, but I can't setup such a "simple" solution...
P.S. I asked local Oracle representative: "have you ever tried to deploy PG on non-MSAD LDAP?". He answered "NO, because it's a very common way - to use existing MS AD to store outside data". Very strange opininon:
1. MS AD are owned and supported by IT department
2. IT security projects, like E-SSO are pushed into company by Security department
3. 1 + 2 means that "The less impact the new solution will make on existing IT infrastructure (BTW, MS AD schema extension and storing outside data in it is a VERY big impact) - the easier the implementation process will be too". It's sad that Oracle doesn't understand such a simple thing
P.P.S. He also told me that "if something doesn't works, I should create SR". But there is some problem: in order to customer to buy ESSO and support (required to create SR's) I have to persuade him to use such a solution, right? Solution, that currently doesn't works? So, there's the only way remains: I have to buy SR's and create request on my behalf. But what must such an SR include? Phrase "Product doesn't works at all"? Oracle tries to get money several times for single work (once from me, because I have to buy SR in order to make Oracle's product work, and than from customer, who will buy the product itself)? Right?
P.P.P.S. Forum engine shows two slashes as line feed, so I had to insert space between them in order to show them correctly

Password Violation error while creating users from Admin interface

Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay

Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay

Why is the INVOICE date different than the ORDER date?

Something odd is happening... I'm receiving workflow notifications from Business Catalyst for Invoices, but sometimes the date of the order is the day before I receive the invoice. This is causing havoc on the shipping side because when I print out the invoice packing slips and export the order files, they don't match up and sometimes customers get missed.
Any idea why the invoice date would be different than the order date and how do I fix it to make them the same?
Thanks in advance!

Hey there,
An invoice is not an order. That is an important thing to know.
An order is generated through a few means but mainly as soon as one product is added to a cart - that order exists and the date marked. An invoice is a purchase and comes from an order.
Create an order in the admin yourself and save it but add no invoice number. You can see you just made an order and you will see the button to generate invoice.
API can make an order and no invoice, a person can add items to cart and finish it the next day if they have their session open that long... Lots of reasons why these dates may differ.

How to add Sub Tabs to Admin Interface under Account Tab.

Guys,
Is there way to add sub tabs to Accounts Tab in admin interface.
Regards,
Vinod

It can be done -
The necessary java code to achieve this needs to be put in the file: includes/bodyStart.jsp above the line that creates the navigation bar:
<% String navBar = p.getMainNavigation();
For example, let's say we want to add a new tab that gives us a shortcut to the debug/session pages, and a sub-tab below it that lists all configuration objects in the repository. Here's the code for it:
// Add a tab..
com.waveset.ui.PageNavigation DEBUG_PAGE = new com.waveset.ui.PageNavigation("Debug", "debug/session.jsp", 0);
DEBUG_PAGE.setRequiredPerms(new com.waveset.object.Permission[] { new com.waveset.object.Permission(com.waveset.object.Type.SYSTEM, com.waveset.object.Right.VIEW, true) });
p.addPage(DEBUG_PAGE);
// Add a sub-tab..
String urlDebugListConfiguration = "debug/List_Objects.jsp?List_Objects_Type=Configuration";
if (! DEBUG_PAGE.containsSubPage(urlDebugListConfiguration) ) {
com.waveset.ui.PageNavigation DEBUG_LIST_CONF_PAGE = new com.waveset.ui.PageNavigation("List Configuration", urlDebugListConfiguration, 0);
DEBUG_LIST_CONF_PAGE.setRequiredPerms(new com.waveset.object.Permission[] { new com.waveset.object.Permission(com.waveset.object.Type.CONFIGURATION, com.waveset.object.Right.VIEW, true)});
DEBUG_PAGE.addSubPage(DEBUG_LIST_CONF_PAGE);
As seen above, appropriate rights can be coded to limit the visibility of these tabs to administrators with certain capabilities. For a complete list of rights, refer to the IDM documentation and the java-docs for com.waveset.object.Type and com.waveset.object.Right.

Oracle 9iAS admin interface layout

To all:
I know I can created a portal the way I wanted but is it possible to change the layout of Oracle portal admin interface as well. For example, to use different color on the banner or use of our customized icons.
Thanks

If the 'Edit' link appears on the page you wish to change, then you have the appropriate permissions. The main admin page is within the 'Portal Design-Time Pages' page group.
Another way to find the main admin page is:
1. Click the 'Navigator' link.
2. Select the 'Page Groups' tab.
3. Find the 'Portal Design-Time Pages' row.
4. Click 'Edit Root Page'.
If you do not have the correct privileges, then you will not see the 'Edit Root Page' link.
Good luck!
Jim Basler

Aggregation mode along one dimension (product) different than along the time dimension

Dear All,
In IBP S&OP, Is it possible that the aggregation mode along one dimension (product) could be different than along the time dimension?
For a demo, a customer has an input at the product family level (vehicle production) which we just “copy” for disaggregation purposes, to the product level (parts), see attached. So for aggregation we used average.
However, time-wise, we need to sum it up.
Thanks for your insight and help.
Kind Regards,
Omar

Hi Omar,
Yes it is possible.
1. Create a new planning level (say PERPRODCUST1) which will be a copy of PERPRODCUST (you base planning level).
2. In the PER section of PERPRODCUST1, do NOT mark any period attribute as root. In other words, the roots for this PL will only be PRDID and CUSTID.
3. Now your KF calculations will be:
VEHICLEPRODUCTION@PERPRODCUST1 = SUM(VEHICLEPRODUCTION@PERPRODCUST)
VEHICLEPRODUCTION@REQUEST = AVG(VEHICLEPRODUCTION@PERPRODCUST1)
Since your KF is editable, it is worth mentioning that, following the above steps has trade-offs. Since your KF is editable, you will have issues with disaggregation when you enter the values at an aggregated level of both time and other attributes. My recommendation (for your configuration) is that this will work fine as long you enter the values at the root level of you time attribute.
Hope this helps,
Chendur

EA6500 admin interface

I am having a lot of issues with the admin interface of this EA6500 router. While in general most of the routers features seem to work correctly the admin interface often refuses to go any further than the spinning loading logo. The only fix for this is to Reset the router to factory settings by depressing the red button and reloading my backed up config file. This is happening far to frequently maybe every two days.
I sometimes notice the problem when i try and access my USB Storage via local or internet, it will refuse my username and password I then check to see if i can access the admin page and all i get is the spining loading logo., hard reset, reload config and all is well. This is more than likely a hardware or firmware problem, although i have my doubts with the whole cloudconnect system. I refuse to talk with tech support anymore, why should i waste my time troubleshooting a product that is not working due to no fault of mine or my network setup. I am starting to feel as if i have been ripped off for a product that was not tested properly before its release, not even mentioning how expensive the router is.

Lots of other forum members are having the same issue with their router (including me). It's a bug.

ODI Execute Button Acting Different than Right-Click - Execute in Diagram

We have noticed that clicking the 'Green Arrow' Execute button in ODI to begin the Execution using First Step with only one Procedure is acting differently than simply right-clicking and selecting 'Execute' within the Diagram tab. We have noticed this issue with only a SQL Procedure.
In other words, when clicking the 'Green Arrow', ODI compiles the package together before executing which seems to make the procedure execute differently than right-clicking and executing the procedure individually.
Has anyone else noticed this issue?

Executing with Green arrow means the entire package would be compiled and executed. In such case if you have any special configuration for that step then that would be effective and thus might show different behavior.
Running a particular step by right clicking on it would be equivalent to running the procedure or interface directly.
Do you see difference in behavior if you run the procedure directly v/s running it within package too?

Yosemite Mail Sets IMAP Flags differently than earlier Mail Versions

Since converting to Yosemite, our junk mail filtering system (a copy of Thunderbird running 24/7 on our Linux server) has not worked.   We get over 1,000 pieces of Spam per day and use this setup to screen the junk before reading on our iPhones.
After hours of debugging I discovered that when Yosemite Mail initially downloads a message from the IMAP server (we use HostGator), Yosemite Mail sets the IMAP Flags on the server to be NonJunk    $NotJunk    NotJunk
Yosemite Mail does this before any message is viewed.
This is very different than Mavericks and earlier versions of Mail. In those earlier versions, no IMAP server Flags were set when a message was downloaded. The same is for the current version of iOS on my iPhone; no IMAP server Flags are set.
The problem is that the three versions a "Not Junk" flag set by Yosemite Mail are confusing Thunderbird and probably other Mail clients.
Does anyone know a way to stop to Yosemite Mail from setting these flags?   I filled a bug report with Apple, but am not optimistic...

Back up all data before proceeding.
1. Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/Bundles
Right-click or control-click the highlighted line and select
          Services ▹ Open
from the contextual menu.* A folder may open, or you may get an error message that the item can't be found. Either result is normal. If the folder does open and has contents, move the contents to the Desktop. Relaunch Mail and test. If there's no change, put the contents of the folder back and quit Mail again.
2. Repeat with this line:
/Library/Mail/Bundles
This time you may be prompted for your administrator login password when you remove the items. Make sure they're removed from the folder and not just copied to the Desktop. If necessary, copy them first and then move the originals to the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Since Firefox 12.0 I am missing tabs in Joomla admin interface

I am using Joomla Admin Interface to upload products to my site, but since recently (I assume its since my last firefox update from 11.0 to 12.0, I am missing some tabs on Joomla Add Product [http://i.imgur.com/HiVMJ.jpg see picture]
In the blueish area surrounded by the black border, I used to have options in tabs in until previous Firefox version; Add image, Add Weight etc, at least 6 or 7 tabs.
While it still Works in Internet Explorer
I tried to clear the cache/cookies and update Java
Using Win 7 Enterprise 64bit
Thanks.

Using a new profile may give different results from merely disabling a plugin. Sometimes even using a new profile is not sufficient with regards to plugins and they need to be totally installed.
I have no particular reason to suspect it is the problem in your case but for instance security or even ad-block software can cause problems, and they are the sort of applications that sometimes may need uninstalling to prevent their operation.
It would be interesting to hear what the Joomla site says.
It would also be interesting to see if the problem does occur in only specific versions of Firefox (try in [[safe mode]] and maybe consider trials with Nightly).

Why is the contents of Safari's downloads folder different than the actual folder?

Why is the contents of Safari's downloads folder different than the actual folder that resides in my users folder?

Problem is if I delete that .plist I'll delete those downloads. I'm still able to launch those downloads from that location so that tells that file is probably not corrupted. I need to be able to located that folder and transfer the downloads from it before I do anything like this. So that begs the question, where is that folder located? When I do a folder search I'm taken to a Downloads folder, but it's not the one that is showing up from within Safari as it's contents are too different.

Attributes in admin interface different than in Debug page

Similar Messages

Maybe you are looking for