Auc description - Urgent
Hi,
Auc is created when WBS element is created and released. I think the description of the Auc is copied from WBS element name.My question is after creation of Auc if the name of WBS is changed the description of Auc will change or not.
Best Regards
Rk
Hi,
When the AuC is created from WBS element the description is copied to asset. Also next change made to the WBS element description will be reflected in the description of asset under construction.
Please reward points if helpful.
Tomek
Similar Messages
-
Special Characters in Report Name or Report Description(URGENT)
Hi All,
I am using Hyperion Financial Reporting System 9 tool. Could anyone tell me what problem we face if we use special characters in report name and report description?
Waiting for quick response.
Regards,
SNwhen using "&" in report and folder titles we had issues with report books not being able to run and also the report name would be incorrectly described.
try to avoid if possible, there is a lower risk if using on an all windows enviroment (clients and servers) but if you have *nix OS it does introduce complexity. -
Error in AUC Settlement (Urgent)
Hello Every body,
I got an error while posting the AUC Capitalization in the settlement rule i have given 100% and amount which needs to be capitalized can also be seen in the Asset Explorer ....the error is as follows..
<u><b>Error:</b></u>
Line Item reduce the cut-off value by 1.00
Massage NO: AA632
Asset affected : 12345
Diagnosis:
The book value of the asset is below the cut off value in the amount of 1.00
Procedure:
Check your entries for the amount, transaction type and cut-off value specifications, such as memo value, scrap value or cut-off value percentage rate
<i>Plz through some light regarding this issue</i>...points will be assigned instead of thanks
Regards
SM<u></u>Hii Jagdish,
The Cut off Value key is assigned to the Dep key and 5% is assigned to it, But it is line with the Accounting rules and principles I cannot change the same.
Again this is maintained in the Recieving asset and the error message is showing the Asset affected is the sender asset.
Pls throw some light.
Regards
Surendra Mahajan -
AUC Validation (URGENT)
Hai Guru's
We need the validation for not allowing multiple posting to assets while doing settlement of AUC.
where is the option in Order settlement
useful answers points will be assain
regareds
RAMHi
For validation and substution check ob28
and settlement profile u need to create and u should specify the pharameters that means wht u need to settle under valid oharameter tab enter settlement required or optional or settlement not allowed and also doc type no entreis and time period and Percentage settlement or amount settlement 100% Validiation these options u should be maintain allocation structure and default object type
Transation OKO7
I hope u problem solved assign me points
Regards
Rams -
Journal Voucher with Description---URGENT
When i am loading Journal voucher template through FDQM, I am not able to View Description of each line in HFM. HFM displays same description entered in the first line of the Journal Voucher Template in all the line items of the Journal Voucher. How is it possible to get view of each individual description line by line. Please respond
Hello Costas,
Basically yes, but take care: The G/L account should set to all currency (multi currency) to be able to post in FC. Go into sap, and try to add values on Vouchers.
Here is a sample code for issuing in FC a voucher.
Dim oJV As SAPbobsCOM.JournalVouchers = oCompany.GetBusinessObject(BoObjectTypes.oJournalVouchers)
oJV.JournalEntries.SetCurrentLine(0)
oJV.JournalEntries.VatDate = Today
oJV.JournalEntries.TaxDate = Today
oJV.JournalEntries.DueDate = Today
oJV.JournalEntries.ReferenceDate = Today
oJV.JournalEntries.Reference = "REF"
oJV.JournalEntries.Reference2 = "REF2"
oJV.JournalEntries.Memo = "MEMO"
oJV.JournalEntries.Lines.SetCurrentLine(0)
oJV.JournalEntries.Lines.AccountCode = "38610100"
oJV.JournalEntries.Lines.FCDebit = 0
oJV.JournalEntries.Lines.FCCredit = 100
oJV.JournalEntries.Lines.FCCurrency = "EUR"
oJV.JournalEntries.Lines.Add()
oJV.JournalEntries.Lines.SetCurrentLine(1)
oJV.JournalEntries.Lines.AccountCode = "38610100"
oJV.JournalEntries.Lines.FCDebit = 100
oJV.JournalEntries.Lines.FCCredit = 0
oJV.JournalEntries.Lines.FCCurrency = "EUR"
If oJV.Add <> 0 Then
sbo_application.MessageBox(oCompany.GetLastErrorDescription)
End If
Regards,
J. -
Rules for joining tables in SQVI
Hi all,
I'm new to this community and this is my first time when i post on this forum. Hope I didn't post or did anything to bad.
I just want to know how can I know which tables should I join. I'm trying to create a report that shows me all the open items from a GL account (Construction In Progress) and have beside the AUC the AUC description, order, PO, Vendor, vendor name, plant, material (at least).
I tried to join BSIS and ANLA for starters, but anything I select it just gives me the same error "No data was selected" Is there any rule like only the key should be selected as selection fields, anything that you could advise would be a blessing.
Thank you
Edited by: Viorel_Petre on Jan 18, 2011 10:52 AMHi,
Welcome to SDN!!!
Since you are new to SAP.
you should ask the functional consultant to provide you with the names of the tables and fields.
the transaction SQVI is used to create queries and you can also use it to know relation bewetween tables for appplying join conditions.
for join conditions.
1. create VIEW.
2. Choose data source as table join.
3. insert 2 tables so see the realation between them.
search google/SDN for more information. -
While Settlement of ACU Asset by T-code AIBU getting error
Message no. AA632
Line item causes scarp value of 1.00 to be violatedHi
Please check the below thread
Error in AUC Settlement (Urgent)
Thanks & Regards
Phaneendra -
PO printout-missing material description-V Urgent help required
Hi,
I am facing a unique issue here.Some times when I create a PO it does not show the material description in the print preview and also in the printout.
It happens sometimes only.
When I try to create a another PO fro the same material it works perfectly okay.
What could be the reason for this ?
It's very urgent as it's affecting business.
regards,
manOOHi Steve,
The thing is that for my user some times the material description deos not appear irrspective of whether she saves the PO or see the preview first.
It is not happening all the time.
Also, when she creates new PO with same material again, it shows material description.
I do not understand this.
Since morning I have found one more issue.I could not see LOGO on the top of PO in preview or actual printout for all the POs. Be it already saved old O or created today.
This is becoming a big issue now.
Is this something to do with authorisations or what could be it ?
PLease let me know if any alternative solution available or any specific thing missed ou.
It's V URGENT
Regards,
manOO -
Hi Gurus,
Can we change the description of the created referenced characteristics in the COPA.
Thank You.
Points will be rewarded for sure.Hi!
Since, the description is in the display mode, while being in editing mode, can't be able to change it.
Is there any way out to change it.
Thank You.
Ravi -
Urgent IDOC Error : No description transferred
Hello
I am trying to load an IDOC for Material Master
Using MATMAS 05
Getting a error 51 Application not posted
When check its details it says No description transferred
There is no long text for this error
Your response is greatly appreciated
Thanks1) You are creating outbound or inbound.
Error 51 is for inbound. Just to make sure.
I think you are doing some abnormal process that's why you didn't see any message.
Thanks,
Narayan -
Urgent:short description display
Hi Experts,
Basically my tool is developed to detect the syntax, warnings,upgrade and unicode errors of other programs.
At output i'm creating a field as short description in which i want to display each program short description which we declare while creating a program.
so i want for each and every program means if i provide at selection screen one program or multiple programs at output for every program it as to display its short description also.
i hope u understood what i meant to say. If u don't please let me know.
regards,
aadi.hi,
just create a report by selecting data from that table using condition name and sprsl.
now in output display those fields.
check this code.
tables: trdirt.
data:itab type standard table of trdirt with header line.
select-options: s_name for trdirt-name.
select * from trdirt into corresponding fields of table itab
where name in s_name.
loop at itab.
write: /10 itab-name,itab-text.
endloop. -
Urgent! Change Descriptive FlexField Prompt
Hi!
I need to hide & change prompt for fields that are retrieved from Descriptive FlexField. Personalization need to be done for one responsibility.
Hiding can be done easly with Segment List.
Is there any way how I can change prompt for one responsibility.
BR
HugoHugo,
To my understanding you should not be able to control the Text for various segments without changing the Flexfield definition. And if you do that it gets affected for all responsibilities.
As a suggestion you can use a Context specific to a responsibility and may be use the same combination of segments for the context. Finally data gets stored in same columns, but since u define the context separately you should be able to provide different name.
Hope that gives you clues to work on.
Regards
Sumit -
Urgent Requirement : How to retrieve Description field from Info type 1002
Hi,
My requirement is to fetch description field from infotype 1002 which will be stored in text format.
I think this will be stored in TTEXT table but am not able to fetch using that.
Can anyone please help me out in this.
Thanks in Advance,
Sarika.Try out following tables
T582ITOPERT Infotype Operation Texts
T582S Infotype Texts
T591S Subtype Texts
T777U Subtype Texts -
Urgent , where i can find the description of table ?
Hello all ,
Has anyone can tell me where i can find the description of transparent table ?
also include the description of fields ...
is these description saved in a special place ( i mean in another table )???? Mmmmm .......
because i want to use crystal report XI to connect oracle 9i . but i can't find the description on the table list ... ...
please let me know the true , many thanks ... ...
thanks a lot !
Best Regards,
CarlosHi Carlos,
are you saying the description of the table doesn't show up in CR ?
which connectivity are you using ?
thanks
Ingo Hilgefort
Business Objects -
Inverted Comma's coming in Item description Automatically-Urgent
Hi All,
I am bit confused about how Inverted comma appears automatically although not required.What is the solution for that.My client doesn't requires that.Try to rep ASAP.
Thanks in advance
monaI would like to know whether Inverted comma's appearing for all item names that you import (or) for few.
1. If your answer is "for few" then "check for your master data in excel sheet"
2. Whether your master data - item description contains any single quote/ double quote/ special characters.
3. Save your excel master data file in "CSV" format
4. Open the "CSV" format file in notepad and use find and replace to remove those unswanted special characters (including inverted comma's).
5. Import/ Update based on your database status.
Note: As risk is involved in doing these steps directly in Live database, I recommend you do in test system at first.
Hope this helps.
Regards
Satish
Maybe you are looking for
-
Looking for a protective case recommendation
When I bought my phone I was given a SwitchEasy Nude case, but to be honest I haven't even put it on the phone as it doesn't feel as though it would give any protection. I'd like something that would give good all over protection, but a lot of the ca
-
Hi, When I subscribed to iTunes match, it moved all my imported songs (i.e. songs from cds that I owned) into the cloud. I finally got fed up of this, and cancelled my iTunes match subscription, and now all my imported songs have disappeared !! Can s
-
Can you change the color pallet in Logic Pro X?
Hi there, Is it possible to change the colors on the color pallet in Logic Pro X? They are too dark for me. I would appreciate your replies. Thanks and cheers, GJ
-
String allocation in ResultSet::getString() issue
Hi all :) I have been learning the basics of OCCI and I am having a problem with Debug mode in MSVC. When I retrieve a string from ResultSet::getString, and the string goes out of scope, I get an assert about an invalid heap pointer. I think that som
-
Why is my lexmark printer suddenly not printing?
This is what pops up: /Library/Printers/Lexmark/filter/CUPSDriver.app/Contents/MacOS/CUPSDriver failed Please help!