Audigy 2ZS Video Edi

Hi folks,?is anybody out there who knows wether the USB-Box "VIDEO EDITOR" is to be used?fully within Windows VISTA ?I mean, is it possible to use it as a soundcard AND use it as an capture device for video sources ?For the moment I see first VISTA drivers for the external box, but I dont`t see any capture application in the VISTA download section. Or is it possible to use the VIDCAP app?within VISTA as I do it in XP ??Many thanks in advance ... Klaus

DrCoolZic wrote:
Configuration HP Laptop 3GHz P4 with 1 GB Ram ...
Sound Blaster 2ZS Video Editor on USB 2.0 port
In Reason 3.0 I try to use the "ASIO USB Sound Blaster Audio" as the Audio Card Driver.
I set the ASIO parameters by opening the Creative ASIO USB control panel
I have tried a lot of different parameters configurations but always ends up with "cracking sound".
Most obvious possible solution was to change the buffer size: I tried several values from min 4ms up to max 50ms without success.
Also tried sample 44.1 48 96 KHz without success.
Also tried 16 & 24 bits ...
Also changed 2in/2out, 2in/4out, ... same story
Note that the sound is excellent if I use the "DX SB Audigy 2 ZS Video Editor" but I loose the capability to use 8 outputs and low latency!!!
Any idea on what can be wrong?
When playing back/mixing w/ reason, you should be able to use higher ASIO I/O latency settings, something between 10 and 100 ms (depending on track count, etc.).
When recording from external device and like to use monitoring, then use lower latency settings (I don't know if you can freeze tracks in Reason, but if you can, and you have plenty of tracks in your project, then try freeze those not important for recording).
Have you checked, if USB controller you're using for Audigy, is conflicting/shared w/ some other devices/controllers?
jutapaMessage Edited by jutapa on 08-12-2006 11:39 PM

Similar Messages

Vista Drivers for the Audigy 2ZS Video Editor

OK, so I know I'm only one of 20 people in the world who were ever stupid enough to buy one; but I am disappointed to see that there is so far no Vista beta driver support for the device.
Are there plans to ever support it under Vista?
As half of the internals are an Audigy 2ZS sound card for which Creative are developing Vista drivers, the job is surely half done? Modifying the existing USB video capture driver surely can't be too difficult?
Must say, that if this device is ignored under Vista, it will be the last Creative product I ever buy .....
Nigel

I wish someone from Creative would give a definiti've answer to this question.
I've had the Video Editor for about a year so it's hardly old technology, and Vista was in development last Summer. The Audigy ZS sound drivers are being developed for Vista, how diffcult can it be to get the Video drivers modified to run under Vista?
Nigel

SoundBlaster Audigy 2ZS VE Vista Driv

I have a Sound Blaster Audigy 2ZS Video Editor and am running vista business, i have installed the latest creative Drivers and have been waiting for months for creative to release PROPER WORKING FULLY FUNCTIONAL VISTA DRIVERS,? so that this product can work as its meant to work. I have been advised that drivers are being worked on and that they should be released soon. Its been 6-8 months and still no drivers that can deli'ver the functionality i expect in a $600 sound card, when i purhcased this product, there was a vista logo located with this product descrition saying it is supported and is vista ready, quite clearly it is not. I need accurate information on the following questions:?. Is there a creative team in fact working on a fully functional vista driver for this product.2. When will this vista driver be released?3. Will this driver deli'ver a fully functional product?Do not reply to this with some crappy template response as this will infuriate me, please reply with logic as i am a paying customer and have been for many years, i expect respect and i expect the truth from creative on this occassion. Please advise and escalate this matter to the MANAGING DIRECTOR OF CREATIVE, if you cannot then provide me with the correct contact details and i will do it myself.

Vespa,
We do not have plans to support Vista for Video Editor.
However, if you check the discussion on the Forum (primarily in the Video area) you will see that the audio portion can work due to the Vista support for the Audigy 2 ZS line and for the video portion, check the info on how to make it work. It works with Vista 32bit.
-Chris

Sound Blaster Audigy 4 Pro & Sound Blaster ZS Video Edi

Im from New York city, and im looking every were to find Audigy 4 Pro & Audigy ZS Video Editor and i cant seem to find it any were any one from new york knows which shop has it and is selling it, and my friend from Ireland, was emailing me about the ZS Video Editor and he wants me to get him one would it work if i sent him that over to Ireland can some one help me! its driving me crazy i cant find those two.

you aren't the only one....
recently did an upgrade to my system and wanted to get a little more heavily into video editing/capture, did the homework and comparisons and settled on the audigy ZS video editor as i was very impressed with everything i saw on creatives canadian site, so i told my puter guy to get me a price and availibility on one
GUESS WHAT, he contacted creative directly and they told him that they had not yet released it and had no idea when they would..didn. teven have a ballpark price!!!
makes you wonder why they post it on their site, list all the features except price and where you can get one!
when they don't even know if or when it will be released in north america...
unfortunately for them, i bought from their competitors...
sorry, i don't mean to be so negati've, just didn't want to see someone spend a lot of time looking for something that may not be there

SB Audigy 2ZS clicking quest

Before I go through the hassle of tweaking all kinds of settings in windows and scrubbing and reinstall drivers (and thereby getting progressi'vely more frustrated), I want to see if anyone else has had the same problem I am and if they found a solid solution.
I have an Intel P4 based machine with a gugabyte 8KNXP mobo. The only cards in my machine are an ATI Radeon All-In-Wonder 9800 PRO, and my Audigy 2ZS. The vid card is riding in the AGP slot, and I have moved my sound card to every PCI slot except the one next to the video card due to heat reasons.
My sound is perfectly fine whenever I am not gaming. When it does act up, I do not get the crackling I have heard posted here by other people. What I get is a very regular click/pop. It is very sudden, very short, and *very* regular. The clicks are usually about a second and a half apart. The clicking isn't always present. It will come and go. When it shows up, it usually continues until I shut the game down, although there are cases when it will just suddenly stop and everything is ok again.
I have had this problem playing online games. WoW, EQ2, EVE, GuildWars, etc... Non-network games don't give me this problem.
The obvious assumption here is that it is network related. My motherboards onboard network controller is on IRQ 8. My audigy is on IRQ 22. No conflict there.
Has anyone experienced a similar problem?

Hello,
Thanks for the reply! In surround mixer, under source, I do see the last slide on the right is mic, but there isn't a mute option under the slide. I tried moving the slide all the way down, but that didn't help. Any other ideas? I'm desperate!!!!!!! Need communication during game!! Thanks

Connecting vcr to external SB Audigy 2zs Platinum Pro

I've just joined, so apologies if I "mess up". I have some precious things on vhs tape, and want to transfer them to cd/dvd. I run Windows XP. I have to use rca connections, don't think there's another option on the vcr. I see the red and white rca connections on the back of the external 2zs, but where does the yellow (video) connection go? Would be very grateful for help. TIA.
Sybil
Message Edited by Drummond on 04--2009 05:32 [email protected]

Re: connecting vcr to external SB Audigy 2zs Platinum Pro~ Hi Katman - many thanks for the reply. There is no video connection on the SBA2zs that I can find either. I did send mail to Creative, but they haven't had the courtesy to respond. If I use the 2zs for the audio connection, can I then attach the video connection from the vcr to a separate video capture card? Will this bring everything together and in synch? Sorry, I'm still very much on L plates with all this. Once I get things on to the computer, I can then edit out what I don't want, and burn the rest to cd/dvd; or that's what I'm hoping!! It's getting the data from the vcr tape that's the stumbling block. I know there are?expensi've machines that you can put the vhs tape in and it will copy direct to dvd, my friend has one, but she doesn't know whether you can pause the recording (disk) and let the tape continue running till she gets to the next bit she wants to copy, then start the disk again. TIA of further help.
Sybil
Message Edited by Drummond on 04-3-2009 04:05 AM

Audigy 2zs probl

Hi there,
I've been having an issue with my Audigy 2zs card lately. I transferred it into a new computer (worked perfectly in the old one) and now it works flawlessly for some programs and terribly on others. I'll compare 2 games, Il-2 Pacific Fighters and Rome:Total war. Both are extremely hungry games when it comes to system resources and will happily consume every bit of processing power and memory I throw at them! My Sound in IL-2 is flawless, absolutely perfect. However, when I try to play Rome:Total War the sound goes to crap. I get stutters, crackling, distortion, it's so bad it makes the game almost unplayable (at least with sound).
I tried all the suggestions in the sticky; I reinstalled the card, made sure it's not sharing an IRQ with anything else, turned off all the extra hardware, etc. I am at a complete loss as to why it is doing this.
The games I used are just an example of 2, like I said... Some stuff it works fine on, other stuff it is just terrible (same problem though, on the games it doesn't work with) but these were all games that worked fine with it on the other computer. I don't think it's a system wide problem because it is selecti've as to what it works with and what it doesn't. Anyone have any ideas?
Thanks in advance for the help!

Are you using AA when playing Rome Total War? If your graphics card bogs down it may also stall the rest of the system including sound. This doesn't happen in all games due their different working nature, but graphics settings may affect sound settings in others. (or it could be the developer wanted to have sound always synchronised with video, but if the graphics card begins to fall behind it will also cause the sound to stutter).
So play around with your graphics settings to see if it hel
ps.
PS: Are you getting the problem with all sound options or just with EAX 3.0? Test the other options as well to isolate the problem if possible.

Loud crackeling noise and barely any sound-Audigy 2zs, Dell Dimension 2

I just installed audigy 2zs into my Dell Dimension 2400 and all Im getting is a loud crackle, like static, out of my center speaker (logitech 5. Thx). There is a faint bit of sound in the background also, and no sound at all from the other speakers. Any suggestions? I think I have all the drivers installed and all the tests have passed. Thx.

I have also had some issues with the sound card popping and cracking. It only happens when I am either playing a cd, DVD or a video game. I have a Compaq Presario 2500 laptop, dvd/dvd-rw dri've Maxtor usb2 external hard dri've, Targus 7 port usb2 router, wireless mouse and keyboard, and finally my Audigy 2 NX sound blaster. Seriously I have tried everything and to no avail. I have even wiped the computer just for kicks. I only had the sound card working properly but it didn?t last. What I did was to uninstall the drivers for the DVD dri've and shut down the computer. After the computer started back up it reinstalled the DVD drivers and I had good quality sound.... or so I thought. About 2 days later the same problem arose and I uninstalled the drivers again but this time it did not fix the problem. I have the windows updated, DVD driver?s updated sound card updates EVERYTHING but I still get the static in the speakers only when I am trying to listen to a cd play a video game or watch a DVD. When you have a 4 thousand dollar sound system connected to your sound card would expect good sound from it. Plus the email technicians have emailed me a million things to do but have those worked? NO! I am starting to think that Creative doesn?t care about its costumers anymore. I have seriously thought about getting a different sound card but I have not. I like my 7. surround sound when I listen to mp3 and watch movies that I have ripped on the computer. Someone please give me some advice this sound card is really trying my patience.

Audigy 2ZS Platinum Pro - ...trying to record with Videostudio, Virtual VCR, Roxio DVD Builder

...just bought (and installed) a SoundBlaster Audigy 2ZS Platinum Pro - the one with the "breakout box" - to replace the on-board Dell audio sound system, which seems to have died after 4 months.
I am able to get good, clear sound from any and all applications that use "playback" audio.
At present, I can get "playback sound" from one program feature that came with my capture device - an Aver Media USB 300, which was plugged in to the "Line in 2" socket on the break out box. Then I tried to record with it... - "Record Operation Failure!" I'm stilll waiting to see what responses I get from the Aver message board in that regard.
Then I tried recording video (and the accompanying audio) with Ulead Videostudio 8, Virtual VCR, and Roxio DVD Builder, none of which could record sound, even in "preview mode". Before the on board sound system stopped functioning, those features worked on all of the above programs except for Virtual VCR, which I hadn't yet installed or tried out.
I've checked the Play/Record Volume Control in "Accessories/Entertainment" and the Line 2 is activated and selected. I've tried plugging in to Line /Mic but that hasn't worked either. I need to go to Radio Shack to get an adapter to plug in to Line 3 and give that a try.
But before I spend even more money, have you ever seen anything like this?
- Jeff.

Jorge,
Thanks kindly for the suggestion, during the installation it did not complain about this patch being installed allready, I'll give this one more shot and see if it persits.
I ran memtest on the machine (10 cycles) wow this thing (G5) is loud in single user mode. I guess the fans don't have power management enabled.
I'm guessing that the issue is from lack of RAM, (512) but I am not 100% on this. Though my research points towards that, It's kind of odd that an app would reach into some other memory segment.
Thank You Again.
I throught all Tiger updates would be obtainable via "Software Update" . I should have searched support.apple.com first.
Quad G5 Mac OS X (10.4.7) 512MB Ram (Stock Config)

[Soundblaster Audigy 2ZS] Sound cutting out in middle of gamepl

I have Vista, and I never had this problem with XP.
I downloaded the Vista drivers and have ran Windows Update for all the missing drivers.
When I run dxdiag.exe
I go to the sound tabs and find this.
The file ctaud2k.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
For Sound
and Sound 2
Sound 3 says everythign is fine.

I've found that Audigy series cards "cut out" if you alter speaker properties in Vista Control Panel.
Creative umm... bug I think that's what they call it...
For example
I find 6bit, 48000 Hz (DVD Quality) is the highest quality I can set.
I've seen it on Audigy 2, Audigy 2ZS and Audigy 4. Win32 and Win 64.
Is your adapter set to studio quality If so - that's most probably it.
Hope this helps.

Connecting Soundblaster Audigy 2zs to Home Theater Amplif

Can I connect my Soundblaster Audigy 2zs directly to an amplifier and still get 5.,6.,or7. speaker setup? I feel it's kind of redundant to use a reciever when the Audigy has all the capabilities of a Home Theater Reciever. And it outputs sound at 92khz, which currently is only available on more expensi've recievers.
My goal is to use my pc as a souce and connect it directly to amps and speakers. I would like to put money I save on recievers into a high end speaker system
I have read in the previous posts that it may be possible to do 5. by getting an mini jack to RCA adapter for each channel. But no details on 6. or 7..

I am in the same situation as you. As the CL told me
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=5343 --
You can either use the audigy to decode the sound or your reciever to decode the sound with the SPDIF passthrough. Just whichever has the better specs.
From my situation I would recommend having speakers with analog hookups to the front/rear/center sub rather then the digital output. The only way to take advantage of the digital output is with a DVD and in that case you can just watch a DVD on your TV rather then your computer. For games the analog 5. hooks is better as well because with games it decodes it and with your reciever it would only have 2. sound.

Question on hooking up an Audigy 2zs to my home theatre syste

im trying to hook up my home theatre system to my pc. does anybody know if the "creative sound blaster digital I/O module cable" (which is an adapter that converts /8" headphone jack to a digital optical cable), is compatible with the Audigy 2zs card? so far i heard its only compatible with the audigy 2 value card..why not the 2zs?
Message Edited by listento3 on 06-27-2006 :6 AM

listento3,
Are you referring to the Digital I/O module unit's If that's the one, then no, I'm afraid it doesn't work with the Audigy 2 ZS soundcard. If your HT system works with coaxial input, you can use coaxial instead of optical.
Jason

Is Creative Audigy 2ZS Platinum Sound Cardcompatible with Yamaha Keyboards? (XG sound

Hi,
I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
Thanks for your time
Vijjee

Hi,
I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
Thanks for your time
Vijjee

SB Audigy 2ZS Plarinum Pro: setting source for recording

Hello!
I am having problems setting the source for recording. I want to set the recording source from 'Wave' (default) to 'Line-In /Mic'. After doing so with the mixer or the MediaSource Player it resets to 'Wave' after some time. Why? Can I force the software to make 'Line-In /Mic' the default setting? It really dri'ves me nuts to see that the source has changed without me being notified. I want to have the source changed only by myself and not by some cozmic radiation, God's will, voodoo magic and whatnot.
Greetings
ClustalW

<Re: SB Audigy 2ZS Plarinum Pro: setting source for recording? Okay ClustalW, I understand the "Default" problem you are having. So can you go to control panel, and sound and there look at your recording devices and tell me what do you see? If your desired device is there, you can choose it as the default and then throughout the rest of windows, this will be THE global default recording device or the first choice, when you are in other programs to record from. Also, make sure your device is plugged in when making this change. On my system with that board, a few years ago, I could make the choice, but it would always pick something else when the source was unplugged. For example, if I were using the front bay inputs as recording, when I would unplug them and reboot, my system picked the next thing as default.
Next go into to your Creative Control panel and do the same thing there. Theoretically your choices should be linked, but this is not always the result. I can choose mine in Vista and windows 7, but lastly I always go to the Creative mixer applet and do it there and that works best. For me, my default is my front panel Mic or Microphone FP but as soon as I unplug it, it wants to make my back mic jack the default.

SB Audigy 2ZS distorted so

I upgraded my SB Li've card with the SB Audigy 2ZS and noticed that while listening to songs and playing games, the sound is distorted. It sounds like the music is playing at a high speed and breaking in short intervals.
I have upgraded the drivers with the latest version available from the Creative website. I also upgraded to the latest Direct X driver - Ver 9. The Creative Diagnostics indicate no issues with the card.
Please advise, Thanks

PaulBrain wrote:
Hi!
I've noticed partially extremely distorted MIDI-Sound on my Audigy 2ZS Platinum Pro; it seems that the problem gets worse the more instruments are playing simultaneously; it doesn't seem to depend on which soundfont is loaded, and if, then only slightly. I didn't encounter the problem with the original drivers (at least I believe so), but I can't step back to the old ones because of their awful BF2-support. Currently I'm using the latest drivers (not beta). Anyone else experiencing this problem? Thanks for your answers!Message Edited by PaulBrain on 02-04-2006 07:7 AM
Select another MIDI Playback Device on Windows Audio settings (try "SB Audigy 2 Zs Synth A [xxxx]" for example).
jutapaMessage Edited by jutapa on 02-04-2006 09:27 AM

Audigy 2ZS Video Edi

Similar Messages

Maybe you are looking for