Audigy 4 Microphone Issue, He

I recently purchased an Audigy 4 Sound Card. My headset was a logitech; it worked fine right up until I installed the Audigy 4. Now I've got awesome sound, but cannot record; or talk in my Teamspeak. I've done all the normal checks in making sure my card was selected in Teamspeak and making sure that my microphone is not muted. I then purchased another headset, A eDimensional Audio FX with force feed back. This thing is killer, but guess what, no microphone there either. I can take both headsets and hook them up to my older computer and it works fine. I have installed, uninstalled and re-installed all the lastest drivers and still no go.
I can even take a regular "stick" microphone and plug it into the new sound card and voice recording works fine. Now here comes the stupid question:
There are two hookups on the new headset...one USB and the other end has the regular twin plugs for speakers and microphone. Should my headset be listed in the properties under, control panel, sound and audio? Because if its supposed to be there it aint.
God I hope someone can help me with this....this is driving me absolutely insane.
Thanks!
SHOTGUN

Applications can change the recording source by themselves. Some games which expect the microphone to be plugged into the first microphone jack on the card will by default change the recording source to vanilla "mic."
There's currently no way to lock the recording source at the moment.

Similar Messages

Microphone Issue's

I'm testing out adobe audition 3 and im having microphone issue's. Im tryin to record with a Blue Snowball USB Microphone, but after i go to Audio Hardware setup and set everthing to ASIO4ALL apply and press ok, i press record and it gives me a message that states, " The currently selected audio driver is not availible. Another application may be using the same driver or the device may not be properly connected or powerd. You can select a new driver using the Audio Hardware Set Up option." I was thinkin it was because i also have mixcraft 4 armed with the ASIO4ALL driver but than i disabled it and still no luck with adobe. Any suggestions?
P.S. : Does anyone have a link to get Adobe Audition 3 for free?

Apostrophes.

Audio/Microphone Issue - Lumia 920

I suddenly have an audio and microphone issue with my Lumia 920 which I've had for two months.
Regarding the microphone, people are suddenly having a tough time hearing me speak into the phone in conversation.
Regarding the audio, the noise from playing video is working, but I can not hear any music. The music is running, but no sound.
Very frustrating problems.
Thanks for any help.

I think Nokia is taking this issue way too lightly. It is now a rampant problem with the 920. People just cannot hear me when I make or receive a call. I do not have any protective case that would interfere with the microphone function etc.
I have searched the issue - and it is becoming a common problem that people have a hard time hearing you on a call - unless, that is, if you use speaker phone function.
Is Nokia going to address this issue - or keep treating it as a non-issue? I have requested a replacement from AT&T - but I anticipate the same issue coming up with it. I would rather not have my phone replaced - especially if Nokia/MS could issue an update that solves this issue.
Thanks

Internal microphone issue NB300

Have recently been using Skype and MSN and everything worked fine.
Then tried to download audio files from dctaphone using microphone socket again seems to work ok.
However now microphone on NB300 barely audible on receiving machines.
Screen surround ultra sensitive and high pitched feedback occasionally.
Have downloaded video downlaods but no significant improvement.
Concerned it may be hardware not software.
Toshiba machine diagnostics dont identify a problem.
Any help appreciated as not too technically minded.
Iain

Sorry for the delay in responding. Did as you suggested and ensured the settings were as shown on the website address you supplied. I have also restored system to a previous restore point which seems to have fixed the microphone issue but now they cannot receive video stream and video images not seen on my machine. Probably need to do some more tinkering. It is a shame that there is no way to record the system settings at a particular time so that in order to regularise the position you can reset manually.
Any way thank you again for your assistance
iain

Microphone Issue - Sound Blaster Audigy 2 ZS Platinum Pro Audio C

Hey there, sorry to post but I've got a little issue which I'm sure is me being stupid but its racking my head so here it comes. I have recently started using talk programs such as vent, skype blah blah to speak to people back home and since moving abroad I have found that now I need the mic to contact these people (which it used to fine before I arri'ved on foreign soil). On clicking on volume control and advance or properties I have nothing in recording for mic and this is where im lost. If I enable the mic on any of the programs people are hearing whatever happens to be coming out of the computer speaks such as games or a movie etc. i've just tried a full removal and reinstallation of the sound drivers for the model in my comp (Sound Blaster Audigy 2 ZS Platinum Pro Audio Card).
All my mates are saying surely you cant lose mic from the volume control but yet its gone and I have no idea how to reactivate it. People seemt o think the card is buggered but it seems fine with everything else I fire out.
Any help on how stupid I'm being would be great.
Thanks in advance.

Hi Joko,
Please check your private message.

Microphone issue

I have a MacBook Pro and can't get my microphone to work on the audio port. I go to Preferences and choose the audio port to work for sound input, but it doesn't do it. It only works picks up sound through the internal microphone. Can anyone advise me?

Hi CosminCl,
Before trying to answer your question, I would like to know if Lumia 925 mic does not work is a consumer issue or a developer issue.
We should be able to give some suggestions here if its developing issue.
If its the consumer issue, I would suggest you ask at community site:
http://answers.microsoft.com/en-us/winphone
Thanks for your understanding,
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SB- Xtreme Gamer - Microphone issues

$ Hello,
I was wondering if anybody could help me out with the issue i'm having. The problem is that i can hear myself in my microphone through my headphones/speakers... but i cant get my microphone to work e.g trying to do sound record in windows or playing games in speaking ingame like counterstrike source.
Running windows 7
q6600
2.4ghz
Intel quad core
Please respond asap

I muted the mic in console.
[IMG]http://i68.photobucket.com/albums/vv75/Michaelped/Capture-2.jpg[/IMG]
Muting the mic in console fixed the issue with hearing myself throught speakers/headphones. The mic still seems not to work.
[IMG]http://i68.photobucket.com/albums/vv75/Michaelped/Capture.jpg[/IMG]

Odd microphone issue with headphone jack

Well, I really have two issues involving the headphone jack. One is when I plug the headphone in the volume will occasionally drop to zero and then no longer go up past 0. A power off fixes this.
A second thing I discovered is that sometimes the microphone does not work after plugging in my headphones. I fist noticed this when I was trying to use the speakerphone in my car with the line out through my stereo. I thought that was by design at first. However, I started using voice control and I noticed that the the microphone was not picking up any sound. I could tell this because of the visual waveform display. If I uplug and replug the microphone may start to work.
This happens fairly frequently but enough to make speakerphone use and voice control rather unreliable.

Yes, it has done it through resets. It seems to happen about 1/2 the time I plug the line out in. They tried to tell me at the store that it was my car trying to control the audio. Then I tried to explain it's a simple stero jack plug.
However, if it keeps up I can go to the service center and get an exchange. I'm going to try and report the issue to Nokia first in case it is firmware related.

Using third party headset with Retina Macbook Pro (microphone issue)

Good day, everyone!
I have very strange issue with my Retina Macbook Pro (Late 2013) OS X 10.9.3
When I plug in my Steel Series Headset, its microphone not recognised by system and only "Internal microphone" available in Settings - Sound - Input.
Headset itself works perfectly fine, because when I plug it to my iPhone, its microphone works without any problems.
Macbook's headphone port also works fine — when I plug in my iPhone original headset to Macbook, its mic works good and I can see "External microphone" in Settings - Sound - Input.
So headset is ok and headphone port is ok. What is the problem?
How to force macbook to use headset microphone instead of built-in one?
Thanks in advance

Either contact the sales staff at the store where you ordered your Mac from or contact the speaker manufacturer & ask them.

Audigy SE Issues -- Startup probl

Hey all - I just recently built a new system and carried over my Audigy SE from my last build to this one. Now, don't know if its a combination of all the new equipment, or the Audigy SE card itself, but for the last two days, I'd been running into problems launching both Ghost Recon Advanced Warfighter ( and 2) and Gears of War. Just today, I got it in my head: "Why don't I try disabling the darn thing.... " Disabled it through system tools, and voila --- both GRAW and GoW launched w/out a hitch. But... no sound! =( Creative, my advice: PLEASE PLEASE PLEASE update the Vista 32 and 64 bit drivers. I can't say for certain that your company is to fault here, but disabling your device has gotten my foot in the door by at least launching these games. Unfortunately, I'm just going to have to resort to on-board audio given the lack of attention to this matter... Other Gamers: I don't know 'bout you, but I was really lookin forward to GoW -- now that I've gotten it workin, you might wanna try disabling any Creative audio equipment you've got on the inside and see if this resolves your issue... If anyone else out there has the same system specs... here they are: - E6750 2.66 Core 2 Duo- Asus MB P5K-E- EVGA 8600 GTS- Corsair XMS 2 gig Ok... I've made my peace.. off to play games now!

Yes, you need ASIO driver ... but as the integrated nor Audigy SE has nati've support foe ASIO ... you need to use Asio4All but ... does the Sibelius software support ASIO? If it does then when you install the Asio4All driver, open it's control panel and set the ASIO Buffer Size (slider) as left as possible (you start hear crackling / distortion in audio when buffer is set too small).
If I were you, I would simple forget the Soundblaster brand and get a pro-card. Low budger cards like E-MU 0404, 22M from Creative brand are much better than any SB model and there are brands like M-Audio, ESI, RME, Lynx, etc. ... depending on the type of interface you prefer most (PCI/PCIe. USB, Firewire or CardBus).
http://www.asio4all.com
http://www.emu.com
http://www.m-audio.com/
http://www.esi-audio.com/products/
http://www.rme-audio.de/en_index.php
http://www.lynxstudio.com/index.asp
jutapa
EDIT: By the Sibelius site, ASIO compatible sound card is listed on computer requirements so, just download the asio4all and have a nice day.Message Edited by jutapa on 02-27-200807:30 PM

Microphone Issue using Adobe Premiere Pro CS5.5

I have also posted this at the Adobe forums. I'm just hoping someone, somewhere can help.
I am a recent convert from Final Cut to Adobe Premiere Pro CS5.5, mainly so I can start burning to blu-ray. I am finding the switch a frustrating experience. The latest issue I have is with audio recording. I have an external firewire mic set up that worked flawlessly with Final Cut for two years for recording commentary tracks. Yesterday, I tried recording a commentary track in Premiere Pro, and it worked fine for about an hour, at which point it suddenly stopped. Now I can only reocrd about 6 seconds of audio before it stops recording, and repeated attempts result in a "serious error" and Premiere crashing.
I have searched everywhere and tried everything I can think of. Restarted Premiere. Uninstalled/reinstalled premiere. Shut down/unplugged/replugged in C-1 microphone. Updated software. Restarted iMac. Nothing works. I am out of things to try, and hoping someone here might have a suggestion. I have tried using the iMac's internal microphone just as a test (since the quality of the recording would be unusuable for my purposes) and Premiere won't even use that for the six seconds it will the C-1.
Thanks in advance for any advice.

So, just in case anyone else is wondering, we never did solve this issue. However, we upgraded Soundbooth to Audition, and were able to move the project there and finish the commentary track. So, that's a workaround, anyway. (A workaround that did not work in Soundbooth).

HP Pavilion dv7 Notebook PC - Webcam and microphone issues

When attempting to use Skype or other videochat programs, I receive an error messaage asking me to enable webcam/microphone. I have gone into the control panel and checked that the integrated webcam and microphone are enabled. Perhaps the programs/drivers behind the hardware have been removed? I am not very computer savvy, but I am sure the issue is not a virus. Any help appreiated.

Hi Dingomaru,
Thank you for joining the HP Forums! I saw your post regarding the webcam and microphone. To provide better assistance can you give me your product number and your operating system please?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Blue Yeti Microphone Issues

Recently purchased a Blue Yeti microphone from Apple and I've had an issue after only using it for one day.
In Garageband > Preferences > Audio/MIDI, the microphone used to be recognised as "Yeti Microphone" however it is now recognised as "USB Advanced Audio Device". This has lowered the quality and increased the sensitivity of the mic by 10 fold. I'm not sure what would have caused this since it occurred after I simply unplugged the mic one day and plugged it back in the next and boom it happened.
Does anyone know how to resolve this? I tried with a new chord as well and that didn't fix the issue...

I'm not sure if this will help but open the Audio Midi setup utility click the on the Yeti or Advance USB device whatever it shows up as. See if you can change the settings to 44100 and 24 bit.

Built-in microphone issue

Hi,
I have an issue with my built-in microphone : it looks like it is "de-activated" or I don't know... I want to use the pronunciation option in Rosetta stone, but the mic is not "recognizing" any sound in the software. I checked in the System Preferences menu, under Sound, and when a select the mic line, the sound bar doesn't react when I talk. However, when I click to select "Input line", the mic seems to react for half a second, and then, nothing again.
Any clues ?

Mic
Take your computer to an Apple Store or an AASP for a looksee. Hopefully, your MBP is still under warranty and/or you have Apple Care.
*Super drive*
Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type dvd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Try a different brand. Top forum favorites
CDs
FUJI
TDK
Verbatim
DVDs
Maxell
Make sure the DVDs are not dirty, smudged and/or scratched.
http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.

Satellite L300D built-in microphone issue

I got my satellite L300D (model # PSLC8C-06100F) about a year ago, and when I first went to use skype it couldn't find a microphone.
I assumed that, unlike my previous satellite, the L300D just didn't come with a microphone built-in.
However, a couple of weeks ago I was on skype and having issues with the microphone headset I had plugged in, and when I unplugged it I suddenly had great sound coming through the built-in mic I thought wasn't there!
The problem is I haven't been able to so much as find it - let alone make it work again - since that one time.
What's going on here?
I obviously HAVE a built-in mic, but neither my computer nor skype can seem to find it.
If anyone out there can help me out on this I'd be very grateful!

I'm actually running windows 7 home premium (a free upgrade from vista came with the laptop), but when I followed your advice the options "configure microphone", "set up a microphone", "find and fix audio recording problems", and "manage audio devices" come up.
When I click on "configure microphone" I get a window that says "click on 'start' button to start the microphone configuration' which, when I do, pops up another window that says "generating source object failed".
When I click on "set up a microphone" I get a window pop up that says "No audio input device found: Make sure your audio hardware is working properly and check your audio configuration in the Audio Devices and Sound Themes control panel", which doesn't exist (though I've looked through everything to do with audio I can find in my control panel, and everything keeps coming up empty to detect a microphone).
When I click on "find and fix..." I get a troubleshooting window pop up which performs a diagnostic and comes up with a window that says "plug in the microphone or headset: the peripheral device does not appear to be plugged in. Check the connection. Proceed to the next step to finish".
When I click on "Manage audio devices" I get the "sound" window with "playback, recording, sounds, communication" tabs. When I click on the "recording" tab it shows a microphone icon called "microphone: Realtek High Definition Audio" (which is also the name of the speakers!), but underneath it reads "Not plugged in"! When I plug in my headset mic it finds it and changes to "default device". The bottom of that window has an option to change default, but it's greyed out and won't let me select it.
Everything points to nonexistence of a built-in mic, but as I stated above I KNOW there is one because it randomly started working! What the hell is going on!!!???

Audigy 4 Microphone Issue, He

Similar Messages

Maybe you are looking for