Audigy2 ZS with Beta Driver (11 Aug 20060) in Windows Vista RC1 does not w
I recently updated my Windows Vista to RC build 5600 (32 bit) and although my driver seems to load properly, windows does not recognize my Audigy2 ZS sound card. I had Vista build 5536 and everything worked perfect...clear sounds, no errors, etc, but with Vista RC, the sound card does not work at all. I have dual boot, and when I boot back to XP, my sound card works good.
I've tried loading the drivers in safe mode.
Any suggestions, or will Creative be releasing a new beta build?
I know that as part of beta testing, these issues come up, but if anyone has gotten their drivers or Audigy2 ZS to work, I could use some guidance and suggestions.
Thanks,
Mike
Hi to all,
I want to make some corrections about the test with BF2. I noticed that even with hardware as the only solution Ultra or less I have only 2. speaker sounds. I played the demo Flight Simulator X and worked well. I have 2. sounds on the speakers when I set up to 7.. When I changed to 5., I did have 5. sounds on the speakers. BF2 graphics are good. However, it sounds that the current Creative drivers are not fully compatible with BF2. It seems to be ok with Flight Simulator X demo. This game is made for Vista. I think that can be one of the reasons. I have not checked any other games. As Creative said, the drivers are not good for 6. or better. I think by January 2007, they will be all right. It would be worse no sound at all.
Take care all,
Medico
Similar Messages
-
I had to replace my Iphone 5c with a new one. Now, my windows 7 pc does not recognize my iphone. Reinstalled itunes. Apple mobile device is running. I did whatever I could find on the internet still no luck. Any suggestions? Thnx
You have done everything verbatim included with this link?
http://support.apple.com/kb/ts1538 -
I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scann
Hi!
After Windows update in april 2014 I cant any longer use the scanning funktion via network from Canon MF8330 Cdn multifunktion printer/fax/scanner machine! It worked fine Before the april Windows update installation.
I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scanner installation ends, then system report that it cannot install the scanner and I have to try installing again. I have done that now several times but it helps not. I Think it has something to do with that the Canon scanner drivers isn´t 64 bit files, or the problem is that windows update has replaces saome dll file to a never version that not work with Canon drivers.
I have seen that there is a service pack 1 from Canon för Windows 8 and 8,1, can I use that service pack to get a never dll file for scanner or work this only for windows 8 version.
Have someone a solution to this! I have contacted the Canon support already and they say that its a Microsoft problem!
Very thanful for help in this case!
Greetings
Sixten
Hi!
I am installing the drivers from Canons site. It is the newest version 2005b for Windows 7 64 bit to MF8330Cdn Canon multifunction printer/fax/scanner. Installation goes well for the printer and fax but not for scanner drivers. The error message is Could not install the scanner. In device manager is there then a unknown device under Image devices. In Device Manager I try to update drivers, but it does not help either, error message is access denied. I am logged on the system with administrator account, therfore it is strange that I get the error message access denied.
I tried earlier to do system restore back to previous time, but it did not work, error was that the system could not do the system restore because of access rights.
is there anything else I could do.
Here is the MF36SCN.inf file for scanner installation from Canon, if it can help You to go further with the problem. Is there something strange in the inf file that does not work in Windows 7 64 bit Windows, something shows that ther is also same 32 bits parts in the inf file.
Greetings
Sixten
; MF36SCN.INF -- Windows Setup File for the MF8300 Series (Windows XP,Vista(64-bit))
; Copyright CANON INC. 2009 All Rights Reserved
; InfID: {BA7E017E-FA42-4831-A084-AA9E671325EE}
; Last Modified: 11-Jun-2009
[Version]
Signature="$Windows NT$"
class="Image"
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
; The above GUID is the class GUID for all scanners and MUST NOT change
Provider=%Msft%
CatalogFile.NTamd64=MF36SCN.CAT
DriverVer=06/17/2009, 11.3.0.0
[DestinationDirs]
DefaultDestDir=11
CNCDsFiles=10,"twain_32\"%CNCRFN%
CNCMediaFiles=10,media
ColorFiles.NT=11,spool\drivers\Color
[ControlFlags]
;ExcludeFromSelect=*
[Manufacturer]
%Mfg%=Models,NTamd64.5.1,NTamd64.6.0
[Models.NTamd64.5.1]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_XP,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_XP,CANON_MFNP&%CNCRFN%
[Models.NTamd64.6.0]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_VISTA,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_VISTA,CANON_MFNP&%CNCRFN%
;........................................ WinXP(64-bit) section
[CNCInstall_XP.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section
[CNCInstall_VISTA.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinXP(64-bit) section(Network)
[CNCInstallNet_XP.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section(Network)
[CNCInstallNet_VISTA.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;.......................................... Common Section
[PushButton.Events]
PushButtonPushed1=%PushButtonPushed1%,{66F2A894-EC9B-430c-9D52-E8719D200DAC},%ButtonApp%
PushButtonPushed2=%PushButtonPushed2%,{506AC8D1-E030-4f05-8F8A-4476153E2D6C},%ButtonApp%
PushButtonPushed3=%PushButtonPushed3%,{9813E8A6-3652-4768-9AD1-C89E9B5CA956},%ButtonApp%
PushButtonPushed4=%PushButtonPushed4%,{03B58D10-0245-4859-A489-D695C7729FB3},%ButtonApp%
[ColorFiles.NT]
CNZ005.ICC
CNFR08.ICC
[CNCDeviceData]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
[CNCDeviceData_VISTA]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
UI Class ID={DF89C549-D67D-4fb0-A575-547073BFAB11}
;The above GUID reused from sample MUST change for each Model.
[CNCAddreg]
HKLM,"%SGDKEY%","DeviceName",,%CNC.MDL%
HKLM,"%SGDKEY%","SeriesName",,%CNC.SRS%
HKLM,"%SGDKEY%","Manufacturer",,"Canon Inc."
HKLM,"%SGDKEY%","ProductFamily",,"TWAIN Scanners"
HKLM,"%SGDKEY%","ProductName",,%CNC.MDL%
HKLM,"%SGDKEY%","InstallDirectory",,"%10%\TWAIN_32\%CNCRFN%\"
HKLM,"%SGDKEY%","DeviceDriver",,"SCANINTF.DLL"
HKLM,"%SGDKEY%","ProductId",,"MF8300 "
HKLM,"%SGDKEY%","DataSourcePath",,"%10%\TWAIN_32\%CNCRFN%\cisds.ds"
HKLM,"%SGDKEY%","TextEnhance",0x00010001,0
HKLM,"%SGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%SGDKEY%","AutoPreview",0x00010001,0
HKLM,"%SGDKEY%","AutoClose",0x00010001,0
HKLM,"%SGDKEY%","SavePreview",0x00010001,1
HKLM,"%SGDKEY%","DriverDate",,"06 2009"
HKLM,"%SGDKEY%","DriverVersion",,"11.3.0.0.mf09"
HKLM,"%SGDKEY%","ColorGear",,%CNC.ColorGear%
HKLM,"%SGDKEY%","ColorMatch Platen",,"CNFR08.ICC"
HKLM,"%SGDKEY%","SGIPPDEF",,"CNCFR08.DAT"
HKLM,"%SGDKEY%","Descreen",0x00010001,0
HKLM,"%SGDKEY%","Unsharp",0x00010001,3
HKLM,"%SGDKEY%","MultiLimitThreshold",0x00010001,180
HKLM,"%SGDKEY%","MultiJackUp",0x00010001,9
HKLM,"%SGDKEY%","MultiTrimJackUp",0x00010001,20
HKLM,"%SGDKEY%","CardPhotoDistThr",0x00010001,30
HKLM,"%SGDKEY%","PhotoTrimThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoRThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoGThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoBThr",0x00010001,210
HKLM,"%SGDKEY%","CardTrimThr",0x00010001,30
HKLM,"%SGDKEY%","CardRThr",0x00010001,30
HKLM,"%SGDKEY%","CardGThr",0x00010001,30
HKLM,"%SGDKEY%","CardBThr",0x00010001,30
HKLM,"%SGDKEY%","ParWhiteBlackEth",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackEthDG",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackSth",0x00010001,35
HKLM,"%SGDKEY%","ParWhiteBlackVth",0x00010001,10
HKLM,"%SGDKEY%","ParLabelingHth",0x00010001,30
HKLM,"%SGDKEY%","ParLabelingLeft",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingTop",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingRight",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingBottom",0x00010001,1
HKLM,"%SGDKEY%","DT_Left",,"10"
HKLM,"%SGDKEY%","DT_Top",,"0"
HKLM,"%SGDKEY%","DT_Width" ,,"1.5"
HKLM,"%SGDKEY%","DT_Length",,"4.5"
HKLM,"%SGDKEY%","DT_Border_1",,"2.5"
HKLM,"%SGDKEY%","DT_Border_2",,"3.5"
HKLM,"%SGDKEY%","DT_BkTh",,"18"
HKLM,"%SGDKEY%","DT_MinWhThr",,"15"
HKLM,"%SGDKEY%","DT_MaxWhThr",,"45"
HKLM,"%SGDKEY%","ButtonNum",0x00010001,1
HKLM,"%STIKEY%","MF8300",0x00010001,1
[CNCAddreg.USB]
HKLM,"%SGDKEY%","AvailableDriver",0x00010001,1
[CNCUSDAddreg_XP]
HKLM,"%WIASGDKEY%","ColorMatch",0x00010001,1
HKLM,"%WIASGDKEY%","ColorGear",,"%CNC.ColorGear%"
HKLM,"%WIASGDKEY%","TextEnhance",0x00010001,0
HKLM,"%WIASGDKEY%","Descreen",0x00010001,0
HKLM,"%WIASGDKEY%","UnsharpMask",0x00010001,0
HKLM,"%WIASGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%WIASGDKEY%","ProductId",,"MF8300 "
HKLM,"%WIASGDKEY%","ButtonNum",0x00010001,1
HKLM,"%WIASGDKEY%","DspGamma",0x00010001,1
HKLM,"%WIASTIKEY%","MF8300",0x00010001,1
HKR,,USDClass,,"{4BA01336-9934-455e-8FB8-4A47A638DF0E}"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E},,,"Canon USD"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,,,%11%\CNCC8300.DLL
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[CNCUSDAddreg_VISTA]
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11},,,"WIA Driver UI Extension"
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11}\shellex\ImageProcessingFilter\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}
; The above GUID is specific to MF8300 and MUST change for a different model.
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC},,,"Canon Image Processing Filter"
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,,,%11%\CNCE8300.dll
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[WiaFiles]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
[Wia2Files]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
CNCE8300.DLL
[CNCDsFiles]
CISDS.DS
SGUI.DLL
SGUI_RES.DLL
WIARES.DLL
IOP.DLL
ITLIB32.DLL
SCANINTF.DLL
TPM.DLL
CNCFR08.DAT
MC2.TXT
JDA_CIMG.DLL
NBS4MB.DLL
NBSCOR4M.DLL
RMSLANTC.DLL
RSTCOL.DLL
[MPScanLLD]
CNCMFP36.INI,,,0x20
CNCLSI36b.DLL,,,0x20
CNCLSD36b.DLL,,,0x20
CNCLSC36b.DLL,,,0x20
CNCLST36b.DLL,,,0x20
CNCLSU36b.DLL,,,0x20
[CNCMediaFiles]
CSSAMP1.MID
;-------------------------------Source Index
[SourceDisksFiles]
CNZ005.ICC=1
ITLIB32.DLL=1
JDA_CIMG.DLL=1
NBS4MB.DLL=1
NBSCOR4M.DLL=1
RMSLANTC.DLL=1
RSTCOL.DLL=1
CISDS.DS=1
SGUI.DLL=1
IOP.DLL=1
SCANINTF.DLL=1
TPM.DLL=1
SGUI_RES.DLL=1
WIARES.DLL=1
CSSAMP1.MID=1
CNCFR08.DAT=1
CNFR08.ICC=1
MC2.TXT=1
CNCC8300.DLL=1
CNCI8300.DLL=1
CNCL8300.DLL=1
CNCE8300.DLL=1
CNCMFP36.INI=1
CNCLSI36b.DLL=1
CNCLSD36b.DLL=1
CNCLSC36b.DLL=1
CNCLST36b.DLL=1
CNCLSU36b.DLL=1
CNCLSO36b.DLL =1
[SourceDisksNames]
1=%D1%,scan.cab,
;-------------------------------String Aliases
[Strings]
Msft="Canon"
Mfg="Canon"
SGDKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\11.3\Devices\MF8300"
STIKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\STI"
DEFAULTKEYNAME="Software\Wow6432Node\Canon\SateraMFP1\Toolbox Ver4.9\Devices\"
KEYNAME="\Software\Canon\MFToolbox\"
WIASGDKEY="Software\Canon\SateraMFP1\WIA\3.0\Devices\MF8300"
WIASTIKEY="Software\Canon\SateraMFP1\WIA\STI"
D1="Canon MF8300 Series Setup Disk"
LPTENUM\CNC.DeviceDesc="Canon MF8300 Series"
ButtonApp = "MF Toolbox Ver4.9"
CNCRFN = "MF8300"
CNC.MDL = "Canon MF8300"
CNC.SRS = "Canon MF8300 Series"
CNC.DeviceDesc = "Canon MF8300"
CNC.SPInfo = "Canon MF8300 Scanner"
CNC.TwainDS = "Canon MF8300 Series"
CNC.ColorGear = "FR08"
PushButtonPushed1= "Scan-1"
PushButtonPushed2= "Scan-2"
PushButtonPushed3= "Scan-3"
PushButtonPushed4= "Scan-4"
CNC.FriendlyName = "WIA Canon MF8300 Series"
greeting
SixtenHow I fixed it, at least for now:
1. I've been using OC Genie for a few days, it has been working great on Windows but I guess it was causing many games to crash to the desktop so I decided to turn it off, since then the memory issue started to happen, since this morning.
2. I can only think of my computer got OC Genie addicted, like addiction to crack or cocaine, and the memory, or call it nervous system, wanted more OC Genie, so it gave it to him and bingo, my 4GB readable, but then I used of trickery and deceit to disable OC Genie again and my 4GB is back again without OC Genie.
Hope this helps someone. -
When importing CDs into i-tunes should the artwork be there automatically. If not how do I get artwork to show in i-tunes and on my ipod. I had artwork with a PC but now I have a mac artwork does not appear.
I don't use iTunes's "fetch artwork", so I'm not 100% sure, but unless you are signed in to your iTunes account, artwork is not automatic. Even then, iTunes doesn't always find it.
You can copy-and-paste artwork from the inernet, either Amazon or Google. I use 300x300 pixel images.
For the future, if you have iTunes questions, you might be better off posting them in the iTunes for Mac forum, this is iTunes for Windows. In this situation, it doesn't make any difference, but next time maybe it will. -
I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone
Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa. -
I have saved a large number of cd on an external drive via my laptop. I have now moved my external drive to my desk to but I tunes does not find all the CD i have saved on the external drive
Depending on which email client software you use
the files should be in 'your home folder' library, esp.
if you use Mail application.... ~/Library/Mail
Since you don't specify what mail application,
that would most be associated with the file.
I notice there are some items to the right of your post
where it says "more like this' so that may be worth a
look to see if similar issues were answered. Also, the
Help viewer in your system is a searchable database.
Seems that google also brings up fair information, too.
Do you have a complete bootable clone of your entire
Mac system on an externally enclosed hard disk drive?
Good luck & happy computing! -
I need to get into contact with Adobe support on renewal of my CC subscription which does not work but I cannot find any PHONE number just the referral to this forum - help, what should I do?? Thanks!!
Use the web chat:
Contact Customer Care
Mylenium -
I do have a Deskjet 5740 with all lights fast blinking. Unplug and plugin again does not help.
I do have a Deskjet 5740 with all lights fast blinking. Unplug and plugin again does not help. That's already it. I would like to know if anybody can tell me if the means the machine is completely broken. Or if this is a seldom failure situation that can be solved somehow. Please don't overlook that it's f a s t blinking.
I wanted this question one more day on the first site.
-
I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.
This category is for iPod shuffle. Is that the type of iPod you have, because your description of the problem does not sound like it's about a shuffle? If it's not a shuffle, what is the iPod model...?
There is music there and I can play it connected to laptop.
Are you doing the playing using the iPod, or are you playing the music using iTunes on the laptop?
All mucis icons read "No music" and this is not correct
Do these icons with "No music" appear on the laptop's screen, or on the iPod's screen -
I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?
After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple -
I can't update my laptop why is it? I di all the process and it says it should restart with a gray screen and a status bar and it does not it just goes back to the regular screen
You will need to contact support to have your account sorted.
https://expresslane.apple.com/GetproductgroupList.action -
When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks
http://osxdaily.com/2014/10/17/os-x-yosemite-installation-stuck/
also use the Command-L to view logs during installation -
I downloaded the beta of iMessage, replacing iChat. Now screen sharing does not seem to be available (shaded out.) Anyone have a suggestion?
Hi,
I am presuming you are looking in the Video Menu but are finding you do not have "permission" to enable Screen Sharing.
In Messages Menu > Preferences > Video section what speed setting is set in the Bandwidth Limit drop down ?
It should be no lower that 200kbps if you want to Video chat or Screen Share (the Min for both is 128kbps)
Even if it shows a speeds higher than this change it to something like 500kbps then close/Quit Messages and then restart it. (i.e change the setting anyway to give a bot of a jolt)
10:18 PM Thursday; May 17, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Unable to sync music in Library of MacBook Air with iPad and iPhone. Appears to start synchronising but does not actually do it. All devices run on same Apple ID. Suggestions please.
Re Outlook for Mac - can anyone confirm that this will acheive my aims to have emails and associated folders within email to synch across all devices and that calender will also sycn across all devices using iCloud ?
-
My new computer with Windows 8.1 does not recognize my iPhone when connected via USB.
My new Dell Computer with Windows 8.1 does not recognize my iPhone 5 when connected via USB. I have reinstalled iTunes to no avail.
Hey, I may have to if I can't get this one to work!!
I have tried a different USB to no avail. Both cables work on my old Dell so I don't believe they are the issue.
I uninstalled iTunes as directed by Apple Support and reinstalled. Apparently, Apple Mobile Device Support is not loading with it because it does not show up in programs.
Maybe you are looking for
-
Oracle DB Adapter throwing NLS_LANGUAGE' by invoking SP in BPEL Process
Hi, While i am invoking a Store procedure, the DB Adapter in BPEL process reslting throwing following below error in <fault> <bpelFault> <faultType>0</faultType> <bindingFault> <part name="summary"> <summary>Exception occured when binding was invoked
-
Hey wondering if anyone knew if Mactuneup by macware is compatible with leopard? Or can you recommend some software to keep my mac clean, fast, and secure ?
-
Hi All. I have to create a several files from one file according to the customer number and I have to attach the right reference to the right customer positon number let say I have the follwong file <libarary> <customer> <pos>1</pos> <nr>1</nr> </cu
-
Can I export Flash CS5.5 keyboard shortcuts to Flash CC?
Flash CS5.5 keyboard shortcuts were located in Library/Application Support/Adobe/Flash CS5.5/en_US/Configuration/Keyboard Shortcuts on my Mac and were an .mfx file. In Flash CC, they're located in Library/Preferences/Adobe/Flash/13.0/Shortcuts and ar
-
Administrato CF 10 error invoking cfc after update.
went through our update cycle for our CF 10 admin for the latest updates. We are now receiving the following error: "Error invoking CFC /CFIDE/Administrator/updates/download.cfc: internal server error [enable debugging by adding 'cfdebug' to your UR