I had to replace my Iphone 5c with a new one. Now, my windows 7 pc does not recognize my iphone. Reinstalled itunes. Apple mobile device is running. I did whatever I could find on the internet still no luck. Any suggestions? Thnx
I had to replace my Iphone 5c with a new one. Now, my windows 7 pc does not recognize my iphone. Reinstalled itunes. Apple mobile device is running. I did whatever I could find on the internet still no luck. Any suggestions? Thnx
You have done everything verbatim included with this link?
http://support.apple.com/kb/ts1538
Similar Messages
-
Factory reset iphone 4s / windows 7 does not recognize my iphone 4s
factory reset iphone 4s / windows 7 does not recognize my iphone 4s
Setting > General > Reset > Erase All Content and Settings.
Read here for help with iTunes and the device http://support.apple.com/kb/TS1538 -
After a recent iTunes update my iTunes failed to start. I uninstalled it and then reinstalled it again, but during installation an error message pops up saying: 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start the system services. The three option buttons which can be clicked are 'Abort', 'Retry' and 'Ignore'. I tried pressing ignore, which allowed iTunes to install. However, it seemed that not all parts off the programme installed, as it wouldn't allow me to open iTunes again. Whenever I press retry it just makes the same message pop up again. How can I show that I have 'sufficient privileges'?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Windows 7 does not recognize my iphone
My iPhone 4 is not recognized by my Windows 7 laptop. iTunes on this PC recognizes it okay, but Windows 7 does not see it as a camera. On my old WinXP machine, it is recognized with no problem.
Did you check the camera notification?
Maybe you'll need to enable it again and reverse the process described in this article:
iOS: Disabling digital camera notification in Windows -
My Windows computer does not recognize my iPhone.
Hello. When I plug my iPhone into my laptop (Windows Vista) the iPhone does not appear in "My Computer." It does sync with iTunes. I searched around and apparently the fix is to delete and reinstall iTunes. Will I lose all of my music when I delete iTunes? What about videos, popcasts, etc?
Thanks.First try the troubleshooting steps here:
iOS: Device not recognized in iTunes for Windows
Uninstalling iTunes will not cause you to lose any music. -
I have just got a replacement iphone 5 but I can't restore my old backup that is ios7 because the replacement is ios6 I have changed my UDID on the developer site but still no luck any suggestions anyone?
You are in breach of your Developer agreement by posting in a Public forum
-
my sound has stopped working on my iphone 4s I did a complete restore and still no luck, any suggestions?
If the silent switch is off, no change after inserting and removing the earbuds or headset cable a number of times, and the same after restoring your iPhone as a new iPhone or not from the backup, your iPhone has a hardware problem.
The iPhone includes a one year warranty. -
Apple recently replaced my broken iPhone 5 with a new one. I backed up the contents of my phone with iCloud.
When setting up my new phone I used an iCloud back up from an earlier date. Now I am missing some of my most recent stuff. How
Do I go back to use the proper iCloud back up to set up my new phone?Tap settings> general> reset> erase all content and settings...then you'll have a chance to setuo your phone again
-
Can I replace my current iPhone 5s with a new one in this case?
I just got my iPhone 5s two days ago, but it already has problems when I was trying to text with it while charging. The phone was doing all these random things like mis-sensed my typing really badly, jumping out to the main screen and even called the person I was texting. I even tried typing messages in Whatsapp, it constantly hides the keyboard from time to time and that's really irritating. While it's on lock screen, I could not slide to unlock it, I had to use my finger scan to access my phone in the end. The phone went normal again once I got the charge unplugged, but it went crazy again once I got it plugged in. I truely believe it's something wrong with the phone rather than the charger. Can I replace my current phone with a new one in this case?
Take it back. This is a warranty/purchase issue. We are just users here.
-
Since upgrading to iOS8 iTunes no longer recognizes my iPhone5 when I connect to SYNC or BACKUP my iPhone5. Thus, these features are no longer available. When I click on the DEVICES tab, the window is dim, and will therefore not allow me to SYNC or BACKUP my iPhone5 on my iMac. I use iTune 11.4 and iOS8.
[email protected]After the first install of iOS8 my iPhone5 locked up with a picture of a cord connected to a device linking to iTunes. After taking my iPhone5 to the Apple Store, an Expert was able to get my phone operational again. However, when I returned home I found I no longer had options in iTunes to SYNC or BACKUP my iPhone5. I suspect that ITunes does not recognize my IPhone any longer. For the past 1.5 years I have no problems updating or syncing my iPhone…it was only after I upgraded to iOS8 last week.
-
HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?
Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try. I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
Thanks for any help!If you have a time machine back up of your current drive you can do this
Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it. -
Hi how are you i want to replace my iphone 4 with a new one. But i am in Darwin,there is no any apple stores. So where can i send my phone for replacement and how much for that?
Warranty and Support are only valid in the country of origin. You will need to take the device to whatever country it originally came from.
Apple will not accept shipments from outside the country nor will they return it to an address outside the country. -
I have an iphone 4 which quit working and I had my iphone 3 reactivated until I get my 4 replaced or fixed. My computer does not recognize my iphone 3 when I plug it in. I also cannot figure out how to apply my last backup to my iphone 3
If your iPhone 4 was running iOS 5, you can't install iOS 5 on an iPhone 3G which means you can't restore the 3G from the backup of the iPhone 4 running iOS 5.
http://support.apple.com/kb/TS1538 -
Help
Itunes does not recognize my iphone when plugged into computer it recognizes it as a still camera. I have installed the lastest version of itunes and gone through the troubleshooting tips and still have the same problems.Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.
-
I have a desktop mac operating on Mac OSx 10.4.11 and the system does not recognize my iphone and I am unable to upgrade to the newest itunes version. What do I need to do?
Backup first
It is always best to have a full bootable backup before you upgrade. If you fail to do this you will be unable to return to this OS if you decide you don't like the new OS. Also there is a slight chance that an install could lose everything on the Mac. The backup must be to an external hard disk. Preferably use Carbon Copy Cloner to make a bootable backup of the whole disk.
Erase before the install
Once you have a bootable backup on an external disk it is best to erase the internal disk with the new installer DVD before you install.
During the install
Preferably do not import any data or preferences from earlier OSs during the install process as this can reintroduce bugs.
OS numbers and names
OS X 10.4.x - Tiger
OS X 10.5.x - Leopard
OS X 10.6.x - Snow Leopard
OS X 10.7.x - Lion
OS X 10.8.x - Mountain Lion
More about Macs
The Apple History site has specifications for every Mac ever produced: http://www.apple-history.com/
Upgrade to Leopard
Those wishing to upgrade to Leopard should be aware that install disks can be expensive unless you contact Apple. Details: http://lowendmac.com/deals/best-os-x-leopard-prices.html Standard Leopard installers impose several hardware limitations including speed and RAM size but all these restrictions can be overcome. Google for details. Leopard works well at 500 MHz with 1 GB of RAM and many happy users have less than this.
Upgrade beyond Leopard
OSs beyond OS X 10.5.8 require an Intel processor. If in doubt check this: Click the apple at the top left of your screen and select 'About this Mac'. This will give you your OS number. Then click 'More Info' to see which processor you have. If it says PowerPC you cannot upgrade to Snow Leopard and above. If you have an Intel Mac it is well worth upgrading to Snow Leopard now and then considering other options after that. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573Z/A
Upgrade beyond Snow Leopard
Information about upgrading Snow Leopard to Lion or Mountain Lion: http://store.apple.com/us/product/MD256Z/A
Important
Check that your Mac complies with any requirements. If you are not in the US you should use the Change Country link at the bottom of Apple pages.
Maybe you are looking for
-
IPod does not show up in itunes or windows
I've been through all relevant troubleshooting pages and I still can't get my 4th Gen ipod to show up on my computer or itunes. I have managed to install a driver, so the device manager recognises there is an ipod fitted. Is it because I have WIndows
-
HP OfficeJet Pro 8500 was not printing.
HP Officejet Pro 8500 It started nothing was printed on a paper. Completely white not even a hint of ink. Ink level were all low. I bought new black and color cartridges and changed it all out. I unplugged all wiring for 24 hours. I reconnected a
-
Yellow status in assets as opposed to green status
when importing video assets, sometimes the status color is yellow as opposed to green. when it is yellow, it runs into problems while im burning. any way to make the yellow status turn green if that is even the problem?
-
Is it possible to run a subVI in parallel with the caller VI?
I have a front panel VI which calls numerous subVIs, one or two of which I would like to execute simultaneously with the calling VI. The front panel has time-dependant operations which are being prevented from running because it is waiting for the su
-
Hi All, Can any one help me, how to assign Adobe forms to Workflow with normal SAP. Thanks, Archana.