Audio and Thinkvantage button

I did a re-install of the OS (XP) and for some reason the thinkvantage button (blue) and the volume control and mute botton do not now work.  Anyone know which drivers may be causing this problem and need to be reloaded?
KB

the early marketing photo had them in blue, then they changed it to black to get colour uniformity on the keyboard keys. The new generation ThinkPad doesn't even have this dedicated button anymore.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

  • 3 Volume and ThinkVantage Buttons

    The 3 volume buttons (Mute, Decrease Volume, and Increase Volume), and the ThinkVantage button it not working on my T60 notepad.  If anyone has experienced this problem and has a fix for it, please let me know.
    Thanks

    Thanks. But the problem is: I could NOT find the solution in these preferences neither. So maybe I touched a wrong keycombination, or whatsoever?

  • M30 - Front Mode and Audio/Video Control buttons don't work

    Hi
    The Front Mode and Audio/Video Control Buttons Don't Work
    Any ideas?
    Thanks

    Hi
    As far as I know the Toshiba Controls utility is responsible for key usage.
    Did you try to install Toshiba Controls?
    Check the Toshiba driver page for this driver.
    Bye

  • Disable ThinkVantage Button and F11

    Is there a way to disable the blue thinkvantage button and f11 key restore functionality on R61 laptops? I have about 900 of the R61 Laptops in a school invironment and would prefer that a student did not perform a restore.

    wgainer wrote:
    And how might one disable the "Predesktop" area. Not an option in the R61
    From a lurker:
    "Short of removing the partition and/or replacing the boot manager, you don't disable the predesktop area.  Again, the best protection mechanism to keep unwanted users out of PE is to password protect it via pe_setupmasterpwd.exe.
    Alternatively, in a domain environment, recovery and restore options in PE can be hidden via GPO."
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Jane
    2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
    I am not a Lenovo Employee.
    I AM one of those crazy ThinkPad zealots!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

  • Fn shortcuts and blue thinkvantage button not working

    The Fn+F2, Fn+F5, and Fn+F8 shortcuts are not working on my computer, yet the Fn+F3 and Fn+F4 shortcuts are working. The other ones used work as well but now aren't and I'm not sure why. They blue Thinkvantage button up by the volume also used to work and is no longer working as well. Any ideas as to how I get them to work again?

    I thought this was the one place I could rely on for answers, but I guess not. I have given up hope.
    T400
    Intel® Core™2 Duo T9400 2.53 GHz__Windows 7 Professional__3GB Memory__160GB, 7200RPM Hard Drive__14.1” WXGA+TFT-CFL__ATI Mobility Radeon™ HD 3470--

  • W530, Windows 8, and Thinkvantage 'Black' Button'

    After upgrading to Windows 8 (from 7), I can't seem to get the black Thinkvantage button  to work or do anything.  
    Can someone point me in which piece of software I need to install to get it to work?  I have looked through the drivers/software list and seemingly installed everything (including the Hotkey Features integration drivers).  
    All of the other function keys, volume, mute, etc. work fine, just not that button.
    thanks
    Solved!
    Go to Solution.

    Black button has no function on Win8, except in the Lenovo preload, in which cases it launches Device Experience which is a preload-only thing.
    On Win7 it was possible to modify registry to make the black (or formerly blue) button launch anything you want, but this just isn't possible on Win8 with the Lenovo tools.
    Black button has been phased out (it doesn't exist on 2013 systems like T431s) and admittedly the product teams did not handle this transition well, as shown by the fact that the button isn't even labeled on your system.
    Sorry for this inconvenience.

  • My  BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.

    My  BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.

    Hello Sabroso007
    Check out the article below to troubleshoot the sound output to your Bluetooth speaker. Check in System Preferences > Sound to see what the output is set to.
    OS X Mavericks: Set up Bluetooth audio devices
    http://support.apple.com/kb/PH14217
    Regards,
    -Norm G.

  • ThinkVantage button startup behavior changes after Rescue and Recovery

    I recently bought a Thinkpad X301 (2777-CTO). When booting my computer, I see the following message: "To interrupt normal startup, press the blue ThinkVantage button". Initially, when I press this ThinkVantage button on startup, I get a "Startup Interrupt Menu", pictured at http://img90.imageshack.us/img90/4773/startupinterruptmenu.png
    This menu is useful since it allows me to either enter the BIOS, start Rescue and Recovery, select a device to boot from, or simply start normally. However, after choosing the Rescue and Recovery option once, this menu no longer appears. Instead, it goes straight to Rescue and Recovery from there on without giving me the choice to enter the BIOS configuration or select a boot device.
    I find this new behavior problematic for a few reasons:
    - The behavior of the ThinkVantage button at startup is inconsistent (a menu that should appear no longer does after running Rescue and Recovery once).
    - There appears to be no straight-forward way of reverting back to the desired (original) behavior.
    - The initial prompt on the power-on splash screen is now misleading. Although it still says "To interrupt normal startup, press the blue ThinkVantage button"; the way the button acts, it would probably be more accurate to say "To start Rescue and Recovery, press the blue ThinkVantage button" instead.
    - This behavior breaks the "Option Keys Display" option in the BIOS setup. Although I enabled this option, which should cause the system to display which key does what (e.g., F1 for BIOS), this is not displayed.
    - Running Rescue and Recovery results in a loss of functionality (instead of simply restoring the system to the initial state).
    - And anytime I press the blue ThinkVantage button (as instructed) instead of F1 or F12, I end up wasting several minutes, waiting for Rescue and Recovery to finish booting before I can properly shut it down and try again.
    This problem appears to have existed for a long time (since 2008; http://forum.notebookreview.com/lenovo-ibm/241845-thinkvantage-boot-menu-boots-straight-into-rescue-... ). However, the only "solution" that I have found is just a workaround: avoid pressing the ThinkVantage button (as instructed by the power-on splash screen).
    The ideal solution would be to have a BIOS (or Rescue and Recovery) update which will prevent the ThinkVantage button from losing its original function after running Rescue and Recovery. I know that this is a minor bug, but this bug and another BIOS bug (in the network boot order menu, which I'll post after this one), which arose in less than a week after I received the computer, makes me question the ThinkPad's reputation for high-quality engineering.

    ThinkPad
    Service and Troubleshooting Guide
    Finding information with the ThinkVantage button
    The blue ThinkVantage button can help you in many situations when your
    computer is working normally, and even when it is not. Press the
    ThinkVantage button to open the Productivity Center thinkvantage toolbox and get access to
    informative illustrations and easy-to-follow instructions for getting started and
    staying productive.
    You can also use the ThinkVantage button to interrupt the startup sequence of
    your computer and start the Rescue and Recovery

    in the windows environment it no longer opens productivity center it opens the toolbox if the toolbox is installed 
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • Audio and the Click Button

    I've noticed when I create a click button that there's an
    option for audio.
    But when I added audio to the button, the audio began playing
    as soon as the slide appeared.
    I thought with the audio being in the option for the click
    button, it would not begin until the button was pushed.
    Is that correct? If so, how can I tell the system not to
    begin the audio until I click the button?
    If that is incorrect, then can someone explain to me the
    value of having audio with a click button if it's not associated
    with the action of clicking the button.
    Thanks
    Pam

    Hi Pam
    All objects in Captivate typically have the ability to
    associate an audio clip with them. However, the actual behavior may
    be misunderstood. For example, if you associate audio with an
    image, the audio begins playing when the image appears. The same
    holds true for buttons. The audio begins playing when the button
    appears on the slide.
    So to answer your question about how to force audio only to
    play when the button is clicked upon by the user, you would need to
    configure the button to jump to either the next slide or a specific
    slide, then have the audio begin playing at the slide beginning.
    The end result is that the user would click the button, the new
    slide would display. As the audio would then be configured to begin
    playing when the slide appeared, the audio would then play.
    Hopefully this helps... Rick

  • Trackpad and trackpad button often unresponsive in Mavericks

    This is an offshoot of discussion about a mouse right click not always working since upgrading to Mavericks.
    I said using the trackpad and trackpad button on my MBP often doesn't effect the computer; I have to repeat those actions multiple times before anything happens.
    Drew Reece offered some suggestions for my issues:
    First, I came to Mavericks from Snow Leopard because I'd tried Lion and Mt. Lion but found my old laptop (early 2008 MBP v4.1) ran way, too slow.
    Before going whole hog on Mavericks I read a lot, then installed it on an external drive (spinning, connected with FW800) and played with it for a few days.  I used Migration Assistant to make the move, which segregated software that was not compatible.  Mavericks was slow for a few days, but did gradually speed up.   However, that was when I first ran into the issue with the trackpad and button not registering with the computer's display.  I also ran into the problems with Mail not liking my 3 Gmail accounts but actually solved that using by booting in safe mode, thanks to another poster here.  Not sure why - I attributed it to Spotlight indexing the drive - everything about the computer was very slow and extremely funky while in safe mode; no way I would want to judge the OS based on performance during that boot.  It was awful.
    I did update a lot of applications to Mavericks-ready versions while I was using 10.9 on that external drive.
    When I felt comfortable, I wiped my NBP hard drive and did a clean install of Mavericks, followed by repeating the same software updates.  Then used Super Duper to just bring over User folders from that external drive.  Because SD restores the Spotlight state there was no "break-in" period so Mavericks ran reasonably fast right away.  I wasn't ready for iCloud deleting my Address Book data but, fortunately, I replaced everything from the external drive's Users/me/Library/Application Support/Address Book folder.
    So, per Drew's suggestion, I ran EtreCheck:
    Hardware Information:
              MacBook Pro (15-inch Early 2008)
              MacBook Pro - model: MacBookPro4,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              GeForce 8600M GT     - VRAM: 256 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    Startup Items:
              FanControlDaemon - Path: /Library/StartupItems/FanControlDaemon
              Tor - Path: /Library/StartupItems/Tor
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 0:53:59
    Disk Information:
              Hitachi HTS542520K9SA00 disk0 : (200.05 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Power 10 (disk0s2) /: 199.71 GB (71.1 GB free)
    USB Information:
              Apple Inc. iPod
              Apple Inc. Built-in iSight
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple, Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
    FireWire Information:
              Other World Computing OXFORD IDE Device 1 400mbit - 800mbit max
                        EFI (disk3s1) <not mounted>: 209.7 MB
                        Banksy (disk3s2) /Volumes/Banksy: 299.21 GB (180.6 GB free)
              Other World Computing OXFORD IDE Device 1 800mbit - 800mbit max
                        EFI (disk1s1) <not mounted>: 209.7 MB
                        Got Your Back (disk1s2) /Volumes/Got Your Back: 319.73 GB (196.91 GB free)
              OWC Mercury Elite Pro 800mbit - 800mbit max
                        EFI (disk4s1) <not mounted>: 209.7 MB
                        Video (disk4s2) /Volumes/Video: 1 TB (561.34 GB free)
                        Repechage (disk4s3) /Volumes/Repechage: 1 TB (513.06 GB free)
                        Wayback (disk4s4) /Volumes/Wayback: 999.39 GB (108.82 GB free)
              OWC Mercury Elite unknown_device 800mbit - 800mbit max
                        EFI (disk2s1) <not mounted>: 209.7 MB
                        Check It! (disk2s2) /Volumes/Check It!: 1 TB (513.38 GB free)
                        The Shed (disk2s3) /Volumes/The Shed: 300 GB (180.43 GB free)
                        Space (disk2s4) /Volumes/Space: 697.3 GB (558.43 GB free)
    Thunderbolt Information:
    Kernel Extensions:
              at.obdev.nke.LittleSnitch          (4050)
              com.rogueamoeba.InstantOn          (6.0.3)
              com.bresink.driver.BRESINKx86Monitoring          (9.0)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] at.obdev.littlesnitchd.plist
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.adobe.SwitchBoard.plist
              [loaded] com.barebones.authd.plist
              [loaded] com.bombich.ccc.plist
              [not loaded] com.bombich.ccc.scheduledtask.1F60888F-BFED-41C0-85FC-E077C4E6162C.plist
              [not loaded] com.freemacsoft.appcleanerdaemon.plist
              [loaded] com.google.keystone.daemon.plist
              [loaded] com.micromat.TechToolProDaemon.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] org.glimmerblocker.proxy.plist
              [loaded] org.macosforge.xquartz.privileged_startx.plist
    Launch Agents:
              [loaded] at.obdev.LittleSnitchUIAgent.plist
              [not loaded] com.adobe.AAM.Updater-1.0.plist
              [loaded] com.adobe.CS5ServiceManager.plist
              [loaded] com.divx.dms.agent.plist
              [loaded] com.divx.update.agent.plist
              [failed] com.google.keystone.agent.plist
              [loaded] com.micromat.TechToolProAgent.plist
              [loaded] com.sony.PMBPortable.AutoRun.plist
              [loaded] net.culater.SIMBL.Agent.plist
              [loaded] org.glimmerblocker.updater.plist
              [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
              [not loaded] ca.madefresh.BodegaAgent.plist
              [not loaded] com.adobe.AAM.Updater-1.0.plist
              [not loaded] com.adobe.ARM.[...].plist
              [not loaded] com.adobe.ARM.[...].plist
              [not loaded] com.adobe.ARM.[...].plist
              [not loaded] com.akamai.single-user-client.plist
              [not loaded] com.bombich.ccc-user-agent.plist
              [not loaded] de.metaquark.appfresh.plist
              [not loaded] ws.agile.1PasswordAgent.plist
    User Login Items:
              GrowlHelperApp
              GrowlMenu
              KeyCue
              SizeUp
              BookMacster
              MagiCal
              Caffeine
              Dates to iCal 2
              iTrashGhost
              Rogue Amoeba Schedule Helper
              Aurora Wakeup Helper
    3rd Party Preference Panes:
              A Better Finder Preferences
              Akamai NetSession Preferences
              EarthDesk
              Fan Control
              Flash Player
              Flip4Mac WMV
              GlimmerBlocker
              MacFUSE (Tuxera)
              MenuMeters
              Perian
              TechTool Protection
    Internet Plug-ins:
              AdobeAAMDetect.plugin
              AdobePDFViewer.plugin
              AdobePDFViewerNPAPI.plugin
              Default Browser.plugin
              DirectorShockwave.plugin
              DivX Web Player.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Flip4Mac WMV Plugin.plugin
              Google Earth Web Plug-in.plugin
              googletalkbrowserplugin.plugin
              iPhotoPhotocast.plugin
              JavaAppletPlugin.plugin
              npgtpo3dautoplugin.plugin
              o1dbrowserplugin.plugin
              OfficeLiveBrowserPlugin.plugin
              OVSHelper.plugin
              QuickTime Plugin.plugin
              RealPlayer Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
              Unity Web Player.plugin
    User Internet Plug-ins:
              CitrixOnlineWebDeploymentPlugin.plugin
              SheepSystemsNPAPIPlugin.plugin
    Bad Fonts:
              None
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: NO
              Volumes being backed up:
                        Banksy: Disk size: 299.21 GB Disk used: 118.61 GB
              Destinations:
                        Wayback [Local] (Last used)
                        Total size: 999.39 GB
                        Total number of backups: 85
                        Oldest backup: 2012-11-13 14:09:20 +0000
                        Last backup: 2013-11-10 12:12:44 +0000
                        Size of backup disk: Excellent
                                  Backup size 999.39 GB > (Disk size 299.21 GB X 3)
    Top Processes by CPU:
                  18%          firefox
                   6%          WindowServer
                   2%          EtreCheck
                   2%          Finder
                   1%          SystemUIServer
                   0%          Little Snitch Agent
                   0%          Little Snitch Network Monitor
                   0%          fontd
                   0%          Aurora Wakeup Helper
                   0%          Little Snitch Daemon
    Top Processes by Memory:
              616 MB   firefox
              365 MB   com.apple.IconServicesAgent
              160 MB   Finder
              127 MB   WindowServer
              98 MB    Mail
              94 MB    mds_stores
              86 MB    Dock
              78 MB    AdobeAcrobat
              49 MB    Contacts
              45 MB    soagent
    Virtual Memory Statistics:
              696 MB   Free RAM
              1.73 GB  Active RAM
              1.05 GB  Inactive RAM
              552 MB   Wired RAM
              517 MB   Page-ins
              0 B      Page-outs
    I don't see anything that mentions software - good or bad.  And I don't see anything else that indicates a problem but maybe I just don't know how to read this report?
    Sorry about the length of this but I wanted to addres all Drew's suggestions.  And I'm still seeing those intermittent trackpad/button issues.
    - thanks

    I'll try to break down each of these sections & point out any bad signs below.
    Hopefully the color helps…
    Alex Machi wrote:
    Startup Items:
              FanControlDaemon - Path: /Library/StartupItems/FanControlDaemon
              Tor - Path: /Library/StartupItems/Tor
    Kernel Extensions:
              at.obdev.nke.LittleSnitch          (4050)
              com.rogueamoeba.InstantOn          (6.0.3)
              com.bresink.driver.BRESINKx86Monitoring          (9.0)
    Launch Daemons:
              [loaded] at.obdev.littlesnitchd.plist
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.adobe.SwitchBoard.plist
              [loaded] com.barebones.authd.plist
              [loaded] com.bombich.ccc.plist
              [not loaded] com.bombich.ccc.scheduledtask.1F60888F-BFED-41C0-85FC-E077C4E6162C.plist
              [not loaded] com.freemacsoft.appcleanerdaemon.plist
              [loaded] com.google.keystone.daemon.plist
              [loaded] com.micromat.TechToolProDaemon.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] org.glimmerblocker.proxy.plist
              [loaded] org.macosforge.xquartz.privileged_startx.plist
    Launch Agents:
              [loaded] at.obdev.LittleSnitchUIAgent.plist
              [not loaded] com.adobe.AAM.Updater-1.0.plist
              [loaded] com.adobe.CS5ServiceManager.plist
              [loaded] com.divx.dms.agent.plist
              [loaded] com.divx.update.agent.plist
              [failed] com.google.keystone.agent.plist
              [loaded] com.micromat.TechToolProAgent.plist
              [loaded] com.sony.PMBPortable.AutoRun.plist
              [loaded] net.culater.SIMBL.Agent.plist
              [loaded] org.glimmerblocker.updater.plist
              [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
              [not loaded] ca.madefresh.BodegaAgent.plist
              [not loaded] com.adobe.AAM.Updater-1.0.plist
              [not loaded] com.adobe.ARM.[...].plist
              [not loaded] com.adobe.ARM.[...].plist
              [not loaded] com.adobe.ARM.[...].plist
              [not loaded] com.akamai.single-user-client.plist
              [not loaded] com.bombich.ccc-user-agent.plist
              [not loaded] de.metaquark.appfresh.plist
              [not loaded] ws.agile.1PasswordAgent.plist
    User Login Items:
              GrowlHelperApp
              GrowlMenu
              KeyCue
              SizeUp
              BookMacster
              MagiCal
              Caffeine
              Dates to iCal 2
              iTrashGhost
              Rogue Amoeba Schedule Helper
              Aurora Wakeup Helper
    3rd Party Preference Panes:
              A Better Finder Preferences
              Akamai NetSession Preferences
              EarthDesk
              Fan Control
              Flash Player
              Flip4Mac WMV
              GlimmerBlocker
              MacFUSE (Tuxera)
              MenuMeters
              Perian
              TechTool Protection
    Internet Plug-ins:
              AdobeAAMDetect.plugin
              AdobePDFViewer.plugin
              AdobePDFViewerNPAPI.plugin
              Default Browser.plugin
              DirectorShockwave.plugin
              DivX Web Player.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Flip4Mac WMV Plugin.plugin
              Google Earth Web Plug-in.plugin
              googletalkbrowserplugin.plugin
              iPhotoPhotocast.plugin
              JavaAppletPlugin.plugin
              npgtpo3dautoplugin.plugin
              o1dbrowserplugin.plugin
              OfficeLiveBrowserPlugin.plugin
              OVSHelper.plugin
              QuickTime Plugin.plugin
              RealPlayer Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
              Unity Web Player.plugin
    User Internet Plug-ins:
              CitrixOnlineWebDeploymentPlugin.plugin
              SheepSystemsNPAPIPlugin.plugin
    Red items are loaded at the system level
    Blue items are loaded at the user level
    The other stuff gets loaded into apps like Safari - they are internet plugins.
    Cleanup:
    All the usual caveats apply, backup before you modify the system, delete the items (or move them to another disk or folder if you are worried about deleting the wrong thing) but ensure the originals are gone or updated.
    Use the Finders "Go menu > Go to Folder…" to open the hidden ~/Library (your users library).
    Reboot for the system changes to take effect.
    How to find updates:
    The critical launchd jobs & kernel extensions use reverse domain notation e.g.
    at.obdev.littlesnitchd.plist means look at http://obdev.at for 'LittleSnitch' updates
    You want to try to update or remove all the system level items.
    Startup Items: Stored in /Library/StartupItems/
    Startup Items have been discontinued by Apple since Mac OS 10.4. They are responsible for making changes at a system level. Remove them all or spend time ensuring ALL related software is up to date. You need a very good reason to have anything installed in here.
    Kernel Extensions: Stored in /Library/Extensions/
    Kernel Extensions also load third party code, but they insert it into the 'core' of the OS. These can be safe, however you must ensure the related tools or apps are up to date, otherwise the system is basically built upon quicksand. Remove them all & see if the OS works better.
    Your LittleSnitch is out of date for example, how about hardware monitor or Rogueamoeba's software?
    Launchd jobs: several types
    LaunchAgents          - Stored in /Library/LaunchAgents
    LaunchDaemons       - Stored in /Library/LaunchDaemons
    User LaunchAgents   - Stored in ~/Library/LaunchAgents
    These are all background jobs, they are not necessarily bad, but if they are loading old code it could be doing untold damage to the performance & stability of the entire OS. Focus on the System level jobs (the ones inside /Library - the system level) also remove ['failed'] jobs.
    EtreCheck gives a status on launchd jobs…
    [loaded]                  - a running job
    [not loaded]            - jobs that are set not to run, basically harmless, remove them unless you plan to use the associated software (if it is up to date)
    [failed]                    - jobs in a crashed or unknown state, it could be forking processes or using all the system resources, remove these.
    User login items:
    Applications and helpers that are managed inside 'Systems Preferences > Users and groups > Login Items tab'.
    These are loaded at the 'User level', consider removing all of them whilst you troubleshoot.  When you decide to re-add them ensure the software is up to date.
    3rd Party Preference Panes: & Internet Plug-ins:
    /Library/PreferencePanes/ and ~/Library/PreferencePanes/
    /Library/Internet Plug-Ins/ and ~/Library/Internet Plug-Ins/
    Once again these items all must be up to date, or remove them from your system. If the prefpanes manage additional software use the uninstaller or see the developers site for uninstall instructions.
    Read the list of Internet plug-ins carefully, there are often duplicate Flash player versions that won't help stability, it's just wasted space too.
    Don't forget to also update Safari's extensions in it's preferences (if you have any).
    Re-run EtreCheck after cleaning up to see if items have returned (some apps will reload the background jobs when re-opened, so either update or remove the software).
    Hope that isn't too daunting, the OS should be better if there are less old items running at the system level.

  • Error while trying to synchronize audio and MIDI.  Sample rate 42804 recognized.  Check conflict between Garageband and external device.

    Sometimes, while playing back my software instrument songs, I get an intermittent pop-up error message, saying "Error while trying to synchronize audio and MIDI.  Sample rate 42804 recognized.  Check conflict between Garageband and external device."
    (Sometimes the five digit number is different, but remains a five-digit number beginning with "4".)
    Simultaneously, the song stops until I press the "Okay" button in the pop-up window.
    When I continue to play the song, the sound is jerky and clipped, and the playhead doesn't keep up with the song, and then suddenly jumps to the part of the song currently being played.
    There's also a sound of static.
    The issue seems to occur whether or not I have my MIDI controller turned on and plugged into my desktop Imac.
    Tony

    Hello,
    open your Audio MIDI Setup utility and set the input to 44100
    https://discussions.apple.com/message/12710638#12710638

  • My earphones mic and volume buttons don't work ever since the iOS 8.1 update! Please help me. One discussion person says they bought a new pair and THEY don't work either. What do I do? I'm about to have a breakdown!

    I rely heavily on my earphones because well... I'm lazy but they don't work. They work on my friend's iPhone who hasn't updated yet but I've updayed and the mic and volume buttons don't work. Please make a correct update!

    Nope, still same problem. I did an install, didn't work. Then I completely removed my IDT driver, restarted, installed the driver, restarted, same problem.
    When I troubleshoot my audio it always asks me which one to troubleshoot. It only works if I do one of the "Speakers / HP - IDT" but I don't know why it has so many devices listed with the same name.
    Also, after I troubleshoot and I can hear audio, if I go to "Manage audio devices" it still shows that no audio device is installed, which is why the webinars won't work.

  • Windows 7 Install and Thinkvantage Key Functionality

    Hello,
    I plan to install Windows 7 Home, however, I don't want to loose the Thinkvantage key and related functionality.  If someone could provide an outline to maintain Thinkvntage key functionality with Windows 7 install I would greatly appreciate it.
    Current OS: Windows XP SP3
    Thinkvantage T60/Type 1953-D7U
    Thank you

    I installed Windows 7 Enterprise x64 on a W500 and all keys are working fine. Some of the tools are discontinued for Windows 7. One of them is the productivity center which enable the blue Thinkvantage button. I installed the latest version of the productivity center for Vista and works fine for me even if not supported on Windows 7. I'm sure Lenovo will find another use for the Thinkvantage button under Windows 7 tho. Also the presentation director is discontinued so the Fn-F7 will start the built-in feature of Windows 7 which will basically do the same thing instead of starting the presentation director. If you used the advanced features of the presentation director you might find the Windows 7 features a bit limited, but Fn-F7 work properly.
    To make all the special keys work properly for your computer using Windows 7 you would need the following:
    Lenovo System Interface Driver
    Hotkey Features
    ThinkVantage Productivity Center (The Vista version)
    As i said the productivity center is discontinued for Windows 7 so there will probably be no support from Lenovo in case of problems with the productivity center.
    I'm not sure what you mean about related functionality so not sure about that one. If you could be a bit more specific it would be easier to say if it will work or not. The choices find in productivity center (when you press the Thinkvatange button) is mostly shortcuts to other applications/tools that have to be installed to work and don't know what you are currently using.
    You can find the available drivers and tools for your system here:
    T60, 1953-D7U drivers
    You could check if you find something missing there. Also you can use system update 4 for Windows 7 that will download and install most of the drivers/software for you.

  • Audio and Video issue with Windows 8.1 upgrade on Ideapad n585

    I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through.  Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center.  Neither of these programs are able to start, from startup or even manually.  They just won't run.  Sound seems to come out fine still, but I do have video issues. 
    First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port.  I still get an image, but it's set to current screen resolution instead of 1080i.  I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens.  Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen.  I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires.  When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer.  So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
    I did try updating the software with what's available through the support site, but nothing happened.  I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software.  Giving the audio and video a complete clean slate to work from, and got no positive results.  I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv.  Problems as described above still apply.
    Anybody else have this issue?  Anybody got a fix?

    have you found a solution to this?
    My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
    I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
    *edit*
    this worked for me i stumbled across this
    I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked. 

  • How can I get ThinkVantage button working again? (after a full HD rebuild)

    WindowsXP Pro, ThinkPad T60   (2007-F4G / UT0F4UK)
    Hi
    How do I get my Thinkvantage button working again?
    Background:
    I had a virus attack and as a precaution I zero-ed my ENTIRE hard disk (using KillDisk). I have managed to re-install most things, including I now have an icon on the taskbar called "Launch Lenovo ThinkVantage Toolbox". However I would prefer it to be fired up by my pressing the (blue) ThinkVantage button at the top of my keyboard.
    I have refused point blank to pay the (outrageous) price of GBP 40.00 for Lenovo to send me a CD with Windows etc on it, but have managed (eventually) to rebuild the entire disk driver by driver until the ThinkVantage Toolbox thing (version 6.0.5449.31) could take over and bring my drivers up to date when I Update my system.
    (It's just that they may have gone in incorrectly??)
    Is there something I should have done during installation.
    Ship

    Hi Ship,
    1. Install these for thinkvantage button:- 
    http://www-307.ibm.com/pc/support/site.wss/MIGR-62850.html
    http://www-307.ibm.com/pc/support/site.wss/MIGR-68000.html
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

Maybe you are looking for

  • I keep getting the following msg on my iTunes:This version of iTunes has not been correctly localized for this language.

    I keep getting the following msg on my iTunes:This version of iTunes has not been correctly localized for this language. Please run the English version.  What do I do?  I have tried changing the language and re-starting and that does not do anything

  • Mac mini won't stop alert sounds

    About a month ago my Mini started making the alert tone (from the mini) whenever I turned off the monitor speakers to go to bed.  It didn't do it before, and even when I turn off alert sounds in system preference SOUND, it starts doing it again.  Any

  • Regarding the Aggregation in  Query

    hi, Is anybody have idea how I can show only the overall result of the query output in the excel . Is there any way out such that we can publish only the overall result in the portal instead all the contents of the query output of EXcel.

  • Labview web server and firewalls

    My data acquisition system is behind a firewall, so when I run Labview webserver to display the front panel vi over the internet, I can't view it using a browser. I've tried the same application at home where I have no firewall and it works. Is there

  • Why in my macbook pro appear battery  repair

    my macbook pro battery runs low too fast, is hot and appears repair battery.