Regarding the Aggregation in Query
hi,
Is anybody have idea how I can show only the overall result of the query output in the excel .
Is there any way out such that we can publish only the overall result in the portal instead all the contents of the query output of EXcel.
Hi Mukesh,
Have you tried putting all your characteristics as free characteristics (remove all characteristics from the rows area and out them in the free characteristics area)
Hope this helps,
Regards,
Nikhil
Similar Messages
-
Hi,
Does the aggregation at query level will not work in BI7.
As i have a key figure with aggregation type summation in backend,there were some similar records when tried to set aggregation at query level it is not working summing the key figures.
Any suggestions.Are you sure there is no exception aggregation defined?
-
Regarding the query generated by BI Sever
Hi Friends
I am facing an issue here,in Answers I am dragging few measures from single fact and some dimension cols but the thing is 2 queries are being generated by BI Server and later there is an Inner join happening....I dont want this to happen...I want it as a single query so that all the data would be retained....Thanks in advance
With Regards
Venhi,
you must clear some things by reading....
**can we have a fact (single logical source table) joined to a dimension at different levels like day and month
you must join to the lowest level in order to be able to take all the possible values....(according you said that you have only 1 Datasource)
Is there a meaning of joing both??for what???
I suspect that you mean that in some cases the query must go in level of day and in others in level of month..
For this you must assign to the logical fact the appropriate 'Datasources',simpe tables which in
1.have the values in day level
2.have the values in month level
These tables Bi called(and generally) aggregate one..
Then you have to set in each Datasource the appropriate level .....
If you use (not recommended from me) , the aggregation wizard ..will show you how....
hope i helped....
http://greekoraclebi.blogspot.com/
/////////////////////////////////////// -
Query regarding the conversion of DME file in MT940 format.
Hello Experts,
I have a query regarding the generation of MT940 file after generating the payment file from other DME tree.
After completion of payment run, my payment file is generated in the DME format which is according to the DME tree.
I want to convert the DME file (which is generated via F110) from existing format to the standard MT940 format.
Is there any standard program which converts the DME file to MT940. If so, please inform me as early.
I have tried to upload the DME file in FF.5 transaction, but it is not allowing me to convert the file in MT940 structure.
Or please inform the steps how i can convert the file .
Awaiting for your inputs.
Thanks in advanceHi Zareena.
I would like to suggest,
SX_OBJECT_CONVERT_RAW_TXT.
Hope that's usefull.
Good Luck & Regards.
Harsh Dave -
Query regarding the data type for fetcing records from multiple ODS tables
hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh -
Query regarding the fields details in particular form for all the users in
Dear All,
I have one query regarding the fields details in particular form for all the users in company.
Let take an exapmle if i had created Purchase Order having fields in content tab as 1.Item No. 2.Quantity 3.Unit Proce 4.Total 5. Location.
While Login in User manager i set these fields only for Purchase order , but when i login from other user and open the similar purchase order the defaults fields are also seen including above 4 fieds .
Now my question is how to set the User choice fiels for the particular form that are common to all users.
Means whenever i login in any user and opens the same document the same fields should be seen....Thanksssss.........You have to login with each and every user and do the Form Settings of every forms, so that all the forms look same for all the users.
This is a manual job and you have do do it with every user login.
Alternately, you can try out this link that explains
[How to Copy One Screen Layout to Another User|http://www.sbonotes.com/2008/03/how-to-copy-one-screen-layout-to.html] -
Query regarding the Node manager configuration(WLS and OAM Managed server)
Query regarding the Node manager configuration(WLS and OAM Managed server):
1) In the nodemanager.properties I have added the ListenAddress:myMachineName and ListenPort: 5556
My setup : One physical Linux machine(myMachineName) has : WLS admin server, managed server(OAM 11G) and nodemanager.No clustered environment.
2) nodemanager.log has the following exception when I start the oam_server1 using EM(Enterprise Manager11g):
Mar 23 2012 1:39:55 AM> <SEVERE> <Fatal error in node manager server>
java.net.BindException: Address already in use
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.AbstractPlainSocketImpl.bind(AbstractPlainSocketImpl.java:336)
at java.net.ServerSocket.bind(ServerSocket.java:336)
at javax.net.ssl.impl.SSLServerSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.<init>(ServerSocket.java:202)
at javax.net.ssl.SSLServerSocket.<init>(SSLServerSocket.java:125)
at javax.net.ssl.impl.SSLServerSocketImpl.<init>(Unknown Source)
at javax.net.ssl.impl.SSLServerSocketFactoryImpl.createServerSocket(Unknown Source)
Default port on which node manager listen for requests is localhost:5556.I have changed it to point to my machine. The port should be of WLS admin server or it should be the managed server port?
3) I have started the NodeManager using the startNodeManager.sh script.
4) The admin server port is 7001 and the oam managed server port is 14100.
Any inputs on what might be wrong in the setup will be helpful.Thanks !By using netstat -anp|grep 5556 you can check which process on your machine is using the 5556 port.
-
I have query regarding the excersing of LTI in ECM
i have query regarding the excersing of LTI in ECM .Please help and explain the process as well as configuration required
check this help document on LTI configuration process in ECM
Long-Term Incentives - Enterprise Compensation Management - SAP Library -
Query regarding the variance calculation
Hi all,
Hope all are doing well. i have an query regarding the VARIANCE CALCULATION IN Production planning module.
here i could see KKS1,KKS2,KKA1 etc,. codes they are using in sap. can any one kindly clarify these codes and uses. pls
regs,
siva-vHi Siva,
To understand the basics of variance calculation in SAP, read below threads which will provide detail information on the same,
Basics of variance calculation-Understanding Period End activities, WIP and Variances
Variance Calculation -KKS1
How production order variance get calculated
Regards,
Narresh -
Hi guys can someone help with a query regarding the 'podcast app' why do they not have all the episodes that relate to one show available why only half or a selected amount
THanks...but some days they have all the episodes right back to the very first show...ive downloaded a few but they are only available every now and then which makes no sense...why not have them available the whole time ??
-
Want to see constant value of CPU not the aggregated one from the cube?
Hi All,
When I see my layout with fiscyear ,it shows the aggregated values for Quantity,Cost Per Unit,0Amount,which is distributed across period.
For example if one WBS and one uear(2008) -0Quantity(12),CPU(100) to four periods of one fiscyear.The distribution would be as shown below:-
Period 0Quantity CPU 0Amount
003.2008 3 100 300
004.2008 3 100 300
005.2008 3 100 300
0006.2008 3 100 300
Total 12 400 1200
So in my layout I'll be able to see :-
fiscyear 0Quantity CPU 0Amount.
2008 12 400 1200
So 12 * 400 <> 1200 which is logically incorrect.
Is there any way by which we can get the constant or average value of CPU from the cube???
Any help would be appreciated.
Rgds,
InduHi Indu,
If you are using Query designer for generating report, you can have this property...In the properties of CPU>Calculate result as...>Average value...
This will give you the result as average of all the values.
Assign points if this helps u...
Regards,
KK. -
Unauthorized User can see the aggregated result?
Dear all,
I got a problem that, unauthorized user can see the aggregated result.
e.g. A user who is allowed to read data of Sales Office (0SALES_OFF) 0001 only. (It is done in the RSECADMIN already)
Now a cube contains Sales records of Sales office 0001 & 0002 :
Sales Office 0001 Sales Value 3000
Sales Office 0002 Sales Value 2000
When the user execute a query from the cube without any selection criteria, it give the aggregated Sales Value 5000.
But if the user try to drill down for each sales office, it can then give error, because the user are not suppose to see Sales Office 0002 records.
What I expect is an error at the very beginning when the user execute the query, saying the cube contains data that the user is not suppose to see, the user need to put in the correct Sales Office as criteria first.
Is there anyone can help on this issue?? I have no idea how can this happened?
Many Thanks!!!
ChrisHi,
Now I understood your concern correctly. Unfortunately, I do not have prompt answer for you. So, User should be able to view the aggregated result, but not to irrelevant sales office. If you don't have condition on Aggregated Result, restricting to individual Sales Office can be done in RSECADMIN.
Let's wait for other's opinions.......
Regards,
Suman -
Aggregation level query "value help" = Only Values in InfoProv doesn't work
Hi,
I have a problem with Selection Variable for a BEx Query :
- I'm working with SAP BI 7.0 support package 15
- My query is an input ready query built for an "aggregation level" based on "real time infocube" (Planning);
- Characteristic, I want to filter with variable, has query property Advanced->Query Execution for Filter Value Selection = Only Values in InfoProvider
- Characteristic (info-object) has set the property: Business Explorer tab--> Query Def. Filter Value Selection as Only Values in the info-provider...
My problem is:
when I execute a query,
the Select Values for Variables screen appears
I push on the Select from List button
and Select Values For MyCharacteristic appears...
but it shows me all values in master data table of my characteristic instead of only values in the infoprovider!!!
If I build a query for the Real Time Cube it works correctly, but if the query is built for the aggregation level it doesn't work!
Could someone explain me why it doesn't work correctly?
Thanks in advanced
FedeThanks to Mariana Lazar
30.03.2009 - 12:30:36 CET - Risposta by SAP
Dear Fede,
Regarding the query built on aggregation level please note the following
the aggregation level is always a Virtual Provider built other
InfoProvider and hence it does not have the dimension table and hence
the F4 mode D is not supported.
Therefore when aggregation level is used in a query, F4 does not supportD-mode: 'Only Values in InfoProvider' and all master data values are
displayed in the value list.
Reference from the note
984229 F4 modes for input help as of SAP NetWeaver 2004s BI
4. Since other InfoProviders do not have a dimension table, the system
displays only posted values if you select "Only Posted Values for
Navigation". Otherwise, it displays the values from the master data
table.
Hope this should clarify your doubts. Please let me know if you have
questions else please confirm the message at your earliest convenience.
Thank you for your cooperation and kind regards,
@KR@ Mariana Lazar
Senior Support Consultant
SAP Active Global Support
Netweaver Business Warehouse -
Tcode to see the aggregation ratio
Hi Gurus,
Based on aggregation ratio, we decide whether a cube require an aggregate,but what is the tcode to know the aggregation ratio? or is there any log/statistics report for that?
Regards
Anu
Edited by: Anu4SAPBI on Sep 21, 2010 1:28 PMIf the BI statistics are activated for the corresponding query, we can execute the query from RSRT (Debug version) with the option " Display statistics data" chosen, thereby once we execute the query we get the stats details like Session UID, Step UID details etc. And in the statistics data verify the column Event ID for the following events:
9000 Data Manager
9010 Total DBTRANS ( Total records transfered from the database)
9011 Total DBSEL ( Total records read at the database)
For these events 9000,9010, 9011 verify the counter column to check for the Total DBSEL and Total DBTRANS values and event 9000 for the Duration aswell. If DBSEL by the DBTRANS ratio if greater than 10 it is generally recommended we can create aggregates on the cubes to improve the performance of the query.
Also further detailed analysis can be done using the stats data in the tables RSDDSTAT_OLAP and RSDDSTAT_DM tables based on the Session UID, Step UID details. Hope this helps. -
How to use the same POWL query for multiple users
Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
SandhyaBatch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..
Maybe you are looking for
-
I can no longer sync with Google Contacts
I have been using google for 2 years and from the beginning have synced iPhone contacts with my google account. I just discovered that the synch stopped working. Initially, I thought it was due to changing google password. I tried to update iTunes
-
Show detailed screen for "WORK ITEMS"
Hi We have configured POWL for showing Leave / Travel request. The requirement is ... we have to show detailed screen of respective item which are displaying under "Work Items", it's a combination of Leave / Travel etc. How do I show complete detail
-
Replication of functional location and equipment from ECC to CRM.
Hi Guys I have activated the required BADI's and adapter objects for func loc and equipment. but i am not able to replicate the funcloc and equipment from ecc to crm.
-
HOW TO HIDE INSTALLED APPLICATIONS
If i download and install any application and if i want nobody to know about that application, how to hide that application. Please help me
-
How to uninstall preinstalled apps on nukia lumia...
Please let me know how to uninstall pre installed apps on lumia 510 as it has only 4 gb internal memory I dont use much of the apps Solved! Go to Solution.