Audio Configuration Contains Unknown items

Has this issue been resolved ?? I have been using Logic Pro 9 for 3 years and yesterday I encounter this issue. Been searching all over the internet and seems like there are lots of questions out there but I did not see any resolution ?? Thought I will post it here. I even ran Logic Pro in 32 bit mode. I usually run in 62bit, but nothing has changed. Please help !!!

Hey,
We have related problem...we have a project we started in Garageband '08 that developed "audio configuration is damaged" alert that leads to an ""audio configuration contains unknown items" alert after hitting ok. We have a Mackie Universal Control hooked up to our setup. We tried to load the project into Logic Studio, but the same messages pop up. In Garageband you can click past it repeatedly and get back to your project, BUT in Logic you can never get past the messages, and you have to force quit. Not sure if the Mackie control board caused this problem...don't have a solution yet and have not figured out how to extract the pieces of the Garageband project into a new project.
HELP!
Thanks,
Chaz

Similar Messages

Error message in Logic "audio configuration contains unknown items"

I am using Logic Studio with an apogee Duet and Mac Book Pro.
So far I love the apogee duet for it's simplicity and sound. I have
however started to receive this error message working with Logic Studio,
almost anytime I start a new track, add a plug-in or instrument, etc.
"Audio Configuration contains unknown items"
It did not do this from the very beginning but started after a few
sessions. I have tried re-installing the driver disc for the Duet but it still happens.
when it does pop-up i can click the ok box and after clicking several times
it will go away and let me proceed.
Could anyone please advise me.
thank you very much.

Maybe this happen bacause you put many additional info in your "Aple discussion" profile about the software that you use, but we can also say you the same as Logic message:
your detailed "Audio configuration" profile info contain a "unknow item"
Whitch is your audio interface?
G
PS: anyway, try to trash Logic preferences.

Error: "Audio configuration contains unknown items"

After a few sessions I did on a song I get this error message. The song continues to work. But from time to time this error appears.
What does it mean? And how can I eliminate it?

Maybe this happen bacause you put many additional info in your "Aple discussion" profile about the software that you use, but we can also say you the same as Logic message:
your detailed "Audio configuration" profile info contain a "unknow item"
Whitch is your audio interface?
G
PS: anyway, try to trash Logic preferences.

ITunes cannot run because it has detected audio configuration problem?

I've got Windows XP, recently did a system restore and was forced to re-install iTunes afterwards. After installation, I click the iTunes icon and get a pop up "iTunes cannot run because it has detected a problem with your audio configuration." I went to the iTunes support page and found a similar trouble shooting scheme. I applied both options and both failed. I tried re-installing again to repair, but after the repair, the problem still remains. I found a major difference in the trouble shooting scheme however and I wander if that could be it. The web page shows quick time's audio channels as "Stereo (L R)", however my quick time control panel doesn't feature that channel. Instead, there are 7 "LayoutTags" to choose from, each containing 7 digits. I'm no computer whiz, so I'm going to need help on this one.

replying to lowriderpharaoh.
hmmmmm. it's sounding like you've still got a damaged version of QuickTime in the PC. (or at least, there's something going wrong with the quicktime.)
let's try swapping out the QuickTime again. we'll take a few additional explicit precautions this time.
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
Next, we’ll manually remove leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll try to get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
if it doesn't launch properly, are you still getting the unusual display effects in the QT preferences?

ITunes Cannot Run It Has Detected a Problem With Your Audio Configuration

Well... I've just come back from christmas with my new green iPod nano (second gen), and I try to use iTunes. It has an "...unknown error (-200)." So I download the new iTunes. NOW it says "iTunes Cannot Because Run It Has Detected a Problem With Your Audio Configuration." I've tryed the support but it doesn't have any WORKING solution. If SOMEONE could PLEASE tell me whats going on, I'd be REALLY greatful.
I've been trying to figure this out for almost 3 days now and I'm hanging by a string here.
HP Pavillion Windows XP Windows Media Edition

It is your QuickTime application, actually. What you want to do is go into your Control Panel, and then Add/Remove Programs. Find QuickTime, click on it, and click on Remove, and then follow through the prompts to uninstall QuickTime.
Then, go here to reinstall it:
http://www.apple.com/quicktime/download/win.html
Make sure you choose the second option that says QuickTime for Windows (NOT the QuickTime with iTunes).
Go through the download and install, and whenever it completes, try to launch iTunes.
CG

Raise the PR through project with unknown item category "U"

HI,
In my business process, i have raised the PR's through the projects. at the time of material assignment we need to give the item category N or L .But at the time of material assignment to the activity,whether third party sale or local sale is not decide .it's only decide at the time of PO creation .is there any options or configuration process to assign the unknown item category at the material assignment the PROJECT?
Regards
Bhavani

Item category available is either N or L. I don't think there is any U available.
If you are referring account assignment in PR. for project it should Q, P or N. U is not for project.
What is the purpose of assigning / planning materials in your project during the initial stage?, is it for cost planning? if it is only for cost planning then follow what Virendra has recommended.
Please also read sap help on Material in Projects.

Ffmpeg ERROR: audio conversion failed: Unknown encoder 'libmp3la

While i use youtube-dl script with -x --audio-format mp3 option i get this error:
ERROR: audio conversion failed: Unknown encoder 'libmp3lame'
[bahaa@Bahaa ~]$ pacman -Qs lame
local/lame 3.99.5-2
A high quality MPEG Audio Layer III (MP3) encoder
local/twolame 0.3.13-7
An optimized MPEG Audio Layer 2 (MP2) encoder
[bahaa@Bahaa ~]$

teckk wrote:
If you are trying to dump the audio from a youtube video with ffmpeg, and encode it to .mp3, troubleshoot what isn't working the way you wish.
Start by seeing if youtube-dl is working.
You can get the formats the video is available in with:
youtube-dl -F http://www.youtube.com/watch?v=123456789
You can usually get audio only using
youtube-dl -f 140 http://www.youtube.com/watch?v=123456789
That will be .aac or .m4a audio
You can leave it like that or to reencode to .mp3
Check if ffmpeg is working.
ffmpeg -i file.m4a -c:a libmp3lame -b:a 128k Oufile.mp3
Or if you have a video file that you want to dump the audio from into .mp3
ffmpeg -i file.mp4 -vn -c:a libmp3lame -b:a 128k Outfile.mp3
If you get an error about lame then check if lame is installed
pacman -Ss lame
Post if ffmpeg works ok for you.
[bahaa@Bahaa ~]$ youtube-dl -F https://www.youtube.com/watch?v=MzjOPtInf1c
[youtube] Setting language
[bahaa@Bahaa ~]$ youtube-dl https://www.youtube.com/watch?v=MzjOPtInf1c
[youtube] Setting language
[youtube] Confirming age
[youtube] MzjOPtInf1c: Downloading webpage
[youtube] MzjOPtInf1c: Downloading video info webpage
[youtube] MzjOPtInf1c: Extracting video information
[download] Destination: Why Do We Blink-MzjOPtInf1c.mp4
[download] 100% of 36.64MiB in 00:49
[bahaa@Bahaa ~]$ ffmpeg -i Why\ Do\ We\ Blink-MzjOPtInf1c.mp4 -vn -c:a libmp3lame -b:a 128k Outfile.mp3
ffmpeg version N-66269-g5eef704 Copyright (c) 2000-2014 the FFmpeg developers
built on Sep 14 2014 16:02:01 with gcc 4.9.1 (GCC)
configuration:
libavutil 54. 7.100 / 54. 7.100
libavcodec 56. 1.100 / 56. 1.100
libavformat 56. 4.101 / 56. 4.101
libavdevice 56. 0.100 / 56. 0.100
libavfilter 5. 1.100 / 5. 1.100
libswscale 3. 0.100 / 3. 0.100
libswresample 1. 1.100 / 1. 1.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Why Do We Blink-MzjOPtInf1c.mp4':
Metadata:
major_brand : mp42
minor_version : 0
compatible_brands: isommp42
creation_time : 2014-10-17 18:20:58
Duration: 00:02:51.34, start: 0.000000, bitrate: 1793 kb/s
Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 1280x720 [SAR 1:1 DAR 16:9], 1599 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc (default)
Metadata:
handler_name : VideoHandler
Stream #0:1(und): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 192 kb/s (default)
Metadata:
creation_time : 2014-10-17 18:20:59
handler_name : IsoMedia File Produced by Google, 5-11-2011
Unknown encoder 'libmp3lame'
[bahaa@Bahaa ~]$ pacman -Ss lame
extra/lame 3.99.5-2 [installed]
A high quality MPEG Audio Layer III (MP3) encoder
community/flam3 3.0.1-4
Tools to create/display fractal flames: algorithmically generated images and animations
community/toolame 02l-10
An optimized mpeg 1/2 layer 2 audio encoder
community/twolame 0.3.13-7 [installed]
An optimized MPEG Audio Layer 2 (MP2) encoder
[bahaa@Bahaa ~]$

"Out Of Memory" message when trying to paste Audio Configuration (Logic 9)

Hello
The song I want to copy Audio Configuration from is quite large, it contains the whole album actually. I suppose that if I truncated it I could get the copying done, but isn't there a way to increse memory allocated to Logic instead ? Or are 16 GB RAM not enough ?
Thanks for any info

I truncated the source song to make it simple and I still get the Out of Memory message. No other app is running except RME's TotalMix & FireFace USB. Is there any other solution than copying all channel strip settings one by one ?
Is it any different in Logic X ?

Error - itunes has detected a problem with your audio configuration...

Can anyone help me with this one?
"itunes has detected a problem with your audio configuration. Audio/video may not playback properly."
I can get into itunes - but nothing plays - not the radio - not my playlist.
Please help!

Then you may have a startup item (an item that starts up when your computer starts up) that is interfering with iTunes/Quicktime. Try following the advice here and seeing if there's anything starting up that doesn't need to be:
http://www.g4tv.com/screensavers/features/38454/ManageWindows_StartupItems.html
Be careful of what you remove.
Also, if you have any sort of USB or such audio hardware, try removing it and trying again.
=)

Itunes cant open due to Audio Configurations

I was Messing with my sound settings because of an over the internet Voice program called Ventrillo I don't think that the Program has anything to do with the error but I don't know how to get either itunes to open or how to get my sound settings back to default

Does this help?
iTunes has detected an audio configuration problem

ITunes wont open due to audio configuration.

Hopefully someone can help me, when I click to open iTunes, a message pops up saying "iTunes cannot run because it has detected a problem with your audio configuration." I have windows vista and dont know what I need to change or where I change it. Please help!
Nicole.

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Closing sales order containing cancelled item

Hello,
This is the scenario. You create a sales order containing 3 items and add the order. One of the items then gets cancelled (in item master data). You then try and close or cancel the order. A red line error message is displayed saying 'Item cancelled' with the item code after it. Is there a way of closing a sales order which contains a cancelled item? I have tried removing the item from the order but am unable to update it afterwards - it shows the same error.
Many thanks,
Kate

Hello Kate,
A precaution is always needed when you cancel any items. You need run a simple query such as:
SELECT * FROM RDR1 T0 WHERE T0.ItemCode = '[%0\]' to check any Sales Orders contain this code.
Thanks,
Gordon

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

How to customize a List object to contain line items other than String

I'd like to create a List that contains line items with the following form:
check box followed by a string followed by a button.
I'd like the list to be backed by an object array that has a similar form:
boolean, String, boolean
which define if the item is checked, it's title, and whether or not to display the button.
So I'd like to have code something like this:
// ten items in this lists
MyList myList = new MyList(10);
// first item
MyObject myObject = new MyObject(false, "Item 1", true);
myList.add(myObject);
// add the rest of the items...I can't use Swing, I only have AWT available in a J2ME environment.
Where do I start?
Can I do this with List?
I've looked at GridBagLayout but I'm unfamiliar with it. Would a GridBagLayout work?
Do I need to create a custom control from scratch (based on Panel or ScrollPane, for example) to accomplish this?
Thanks,
Nick.

List only takes Strings. Here's an possibility with GridBagLayout:
import java.awt.*;
import java.awt.event.*;
public class ListTest implements ActionListener
    Object[][] data =
        { Boolean.TRUE, "John Ericsen",   Boolean.TRUE },
        { Boolean.FALSE, "Heidi Pall",     Boolean.TRUE },
        { Boolean.FALSE, "Gregg Fletcher", Boolean.FALSE },
        { Boolean.TRUE, "Pieter Gaynor", Boolean.TRUE },
        { Boolean.TRUE, "Janice Clarke", Boolean.TRUE },
        { Boolean.TRUE, "May McClatchie", Boolean.FALSE },
        { Boolean.TRUE, "Bill Horton",    Boolean.TRUE },
        { Boolean.FALSE, "Helmet Krupp",   Boolean.TRUE },
        { Boolean.FALSE, "Ian George",     Boolean.TRUE },
        { Boolean.TRUE, "Jill Smythe",    Boolean.FALSE }
    public void actionPerformed(ActionEvent e)
        Button button = (Button)e.getSource();
        String ac = button.getActionCommand();
        System.out.println("ac = " + ac);
    private Panel getPanel()
        Panel panel = new Panel(new GridBagLayout());
        GridBagConstraints gbc = new GridBagConstraints();
        gbc.insets = new Insets(2,2,2,2);
        //gbc.weightx = 1.0;         // horizontal dispersion
        //gbc.weighty = 1.0;         // vertical dispersion
        for(int j = 0; j < data.length; j++)
            Checkbox cb = new Checkbox("", ((Boolean)data[j][0]).booleanValue());
            gbc.gridwidth = 1;
            panel.add(cb, gbc);
            gbc.gridwidth = GridBagConstraints.RELATIVE;
            gbc.anchor = GridBagConstraints.WEST;
            panel.add(new Label((String)data[j][1]), gbc);
            gbc.anchor = GridBagConstraints.CENTER;
            gbc.gridwidth = GridBagConstraints.REMAINDER;
            if(((Boolean)data[j][2]).booleanValue())
                Button b = new Button("call");
                b.setActionCommand((String)data[j][1]);
                b.addActionListener(this);
                panel.add(b, gbc);
            else
                panel.add(new Label(" "), gbc);
        return panel;
    private Panel getList()
        Panel child = getPanel();
        ScrollPane scrollPane = new ScrollPane()
            public Dimension getPreferredSize()
                return new Dimension(200, 125);
        scrollPane.add(child);
        Panel panel = new Panel(new GridBagLayout());
        panel.add(scrollPane, new GridBagConstraints());
        return panel;
    private static WindowListener closer = new WindowAdapter()
        public void windowClosing(WindowEvent e)
            System.exit(0);
    public static void main(String[] args)
        Frame f = new Frame();
        f.addWindowListener(closer);
        f.add(new ListTest().getList());
        f.setSize(400,400);
        f.setLocation(200,200);
        f.setVisible(true);
}

Itunes starts but fails to open due to audio configuration problem

Hi
I have been running itunes 7.1 quite successfully until today. Running on windows xp/toshiba laptop.
Problem occurs when i select itunes on desktop, itunes appears on task bar below, after a number of seconds the following error message appears "itunes cannot run because it has detected a problem with your audio configuration", once I click ok on this message itunes terminates.
No changes have been made to my audio configuration (to the best of my knowledge), i can run Windows Media Player and that works fine, so too real player.
I reinstalled itunes, but this did not resolve the problem. I also ran itunes from another logon on my laptop and that presented the same error. I checked all my audio settings in the control panel and also ran the diagnostics on each device and all appears to be fine.
Has anybody faced the same issue, and could anybody advise on any diagnistic tool that could assist in pinpointing the configuration problem?.
Thanks
Toshiba Satellite Windows XP Pro

Hi
Got it resolved, thanks for the prompt responses all!.
Resolved by removal current version of Quicktime thru the control panel (add/remove programs), and then reinstalled from the website.
Phew!
Toshiba Satellite Windows XP Pro

Audio Configuration Contains Unknown items

Similar Messages

Maybe you are looking for