Audio has stopped on my MacPro with Yosemite.

The audio has stopped working. Was working fine earlier today. I have shut down and restarted several ways and times.

Finally figured it out. My "Sound Output" had changed to "Digital" for some reason. Once I changed it back to "Internal Speakers" it's all good.

Similar Messages

My MacBook Pro's internal SuperDrive has stopped recognizing CDs/DVDs after Yosemite install

After upgrading to Yosemite, my MacBook Pro's (early 2011) internal SuperDrive has stopped recognizing CDs/DVDs after Yosemite install. It takes them in and will eject them with the keyboard button, but they will not mount. Disk Utility shows the SuperDrive and shows the inserted media, but will not mount the disk. That button is grayed out. Please help! I still have training libraries and music I access on such media. Thx!

UPDATE: I discovered some forum posts about a similar issue with Mavericks that recommended re-installing the system to fix the problem. I realized that I rarely restart my computer unless there's an update that requires it, and decided before undertaking a full re-install of Yosemite to simply restart my computer again. THIS WORKED! The SuperDrive is now mounting CDs and DVDs. Not sure what the issue was, but if anyone else has this issue I hope this will save you hours of frustration.

Anytime i plug in my headset, i get this message IDT PC Audio has stopped working

Anytime i plug in my headset, especially the micro phone plug into the port, first of all i get a pop up twice saying "cannot find.startup file". Then when i cancel the two pop ups, i get another saying "pop up IDT PC Audio has stopped working".
Then i try to continue with it using skype, as soon as i start dailing, i keep hearing the sound playin from the computer instead of the headset. when i play music from the headset in the same situation, i hear the music playing in the headset.
What should i do please. I need your urgent response
thank
chris

Hi @brabin1979
Thank you for visiting the HP Support Forum. In order for your issue to be properly addressed. Please visit the Dell Support Site at http://www.dell.com/support/home/us/en/19?c=us&l=en&s=dhs.
Regards,
George
I work for HP

10.2.1 error "iTunes has stopped working" Windows 7 with audio CD

Hi! Hoping someone can help me with this one. Just upgraded to 10.2.1.
iTunes opens ok but if I put in an audio CD, I get the windows error "iTunes has stopped working." It checks for help and then it states "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Then it closes.
Any ideas?
Thanks!

Here it is:
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Dell Inc. Inspiron 570
iTunes 10.2.1.1
QuickTime 7.6.9
FairPlay 1.11.16
Apple Application Support 1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver 1.52.0.0
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0028A5A8034DDBA8
Current user is not an administrator.
The current local date and time is 2011-04-07 20:35:42.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4200
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.2.1.1 (x64) is currently running.
iTunesHelper 10.2.1.1 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: TSSTcorp DVD+-RW TS-H653H, Rev D400
Audio CD in drive.
Found 18 songs on CD, playing time 78:37 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:12:47
Track 3, start time 07:55:58
Track 4, start time 11:40:28
Track 5, start time 15:29:22
Track 6, start time 20:37:56
Track 7, start time 25:54:27
Track 8, start time 29:58:64
Track 9, start time 35:45:17
Track 10, start time 40:25:27
Track 11, start time 46:05:25
Track 12, start time 49:56:00
Track 13, start time 53:45:22
Track 14, start time 59:38:65
Track 15, start time 63:30:13
Track 16, start time 67:17:33
Track 17, start time 71:04:38
Track 18, start time 74:46:25
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.

ITunes has stopped working...with iTouch on Windows 7

When I connect my iTouch to Windows 7 HP Pavilion Slimline to iTunes 9.1 I receive error: "ITunes has stopped working..." and iTunes is no longer accessible. The error code in event viewer is Exception code: 0xc0000005. I do not have a problem with iPod Nano on same Windows 7 PC with iTunes.
I have looked at all the threads and tried everything I could find without success:
1. Uninstall and reinstall device drivers and reconnect iTouch
2. Uninstall and reinstall iTunes
3. Uninstall and reinstall all Apple Software on PC
4. Uninstall and reinstall Norton
5. Disable Bonjour
6. Create new user account with admin rights and try to connect
Anyone go any ideas on how to fix?
thks..

crazydude5132,
Perhaps this article will help:
http://docs.info.apple.com/article.html?artnum=305042
Hope this helps,
Generik
Dual 2.3 GHz PowerPC G5 Mac OS X (10.4.8)

CS3: Error "Licensing has stopped working" | Mac OS with Lion Upgrade

Hi:
My trusty Adobe Photoshop CS3 has quit working with the upgrade to Lion on my Intel iMac.
Specifically, when I try and launch it now I get "Licensing for this product has stopped working. You cannot use this product at this time. You must repair the problem ..."
I went to this site for advice: http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
I followed Solution 1: Delete the FlexNet Publisher preferences folder
It didn't work.
Now I'm trying Solution 2: Run the License Repair Tool
I get to step 5g and type:
sudo python /Volumes/LicenseRecovery\ 11.6.1/LicenseRecovery/LicenseRecoveryLauncher.app
I enter my PW.
Then I consistently get an error that reads:
File "/Volumes/LicenseRecovery 11.6.1/LicenseRecovery/LicenseRecoveryLauncher.app", line 1
SyntaxError: Non-ASCII character '\xfe' in file /Volumes/LicenseRecovery 11.6.1/LicenseRecovery/LicenseRecoveryLauncher.app on line 1, but no encoding declared; see http://www.python.org/peps/pep-0263.html for details
Can anyone help? Thank you very much!

This worked for me (Mac OS) :
1) you should have opened the LicenceRecovery111.dmg file and you should see in the LicenseRecovery directory a file named LicenseRecover.py
2) clic on the right of the mouse, do a copy of the LicenseRecover.py and renamed it at the end .pyOld
3) find in your Mac in the applications the Smultron.app editor (you may need to use a text editor that keeps encoding of the file when it read and save it, Smultron seems to do that), launch Smultron
4) in Smultron do menu : file - open and find, in the LicenceRecovery directory, the file named LicenseRecover.py chose it to open it.
In the options, I did not have to chose, because the default encoding (Occidental Mac OS Roman) worked for me (with menus in english then), but I think you may chose in the option when you open the file the coding : UTF-8
4) the first line in the LicenseRecover.py file was
# encoding: utf-8
. replace it by
# --*-- coding: utf-8 --*--
. save the file
5) try to re-execute the process as mentionned (sudo python ...)

ITunes has stopped working. Problem with iTunes Helper Module

After i installed the 7.3.1 iTUNES update for my windows VISTA, i keep getting iTunes has stopped working, and a message saying there is a problem with iTunes Helper Module.. I've tried to re-install and everything.. Can anyone help me out?

here you go
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunesHelper.exe
Application Version: 7.3.1.3
Application Timestamp: 468d67e8
Fault Module Name: QuickTimeStreamingAuthoring.qtx
Fault Module Version: 7.2.0.240
Fault Module Timestamp: 4684a83a
Exception Code: c0000005
Exception Offset: 00016c09
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 18fe
Additional Information 2: f42ba5cd8b2ed31f18b99a5ea46137af
Additional Information 3: 4735
Additional Information 4: ae0a749503b699b3b75d581a3dbfd557
Extra information about the problem
Bucket ID: 466198587

Windows has stopped working error message with new iPad2

Can some one please help me. I have the latest iTunes software 10.4 which has been working fine up to today when i tried to get my iPad2 up and running. I have also updated my iPad to the latest software as well. When syncing either books or photos, the program will work for some time anywhere between 50 & 150 books or 300 & 450 photos and then I get the error message that iTunes has stopped working and windows has shut it down. I am running win7 64bit with 6gig RAM on a HP DV7 laptop.

How much storage space do you have available on your iPad 2? if could by running out of space. Also try restarting your iPad 2 by holding down the on/off and home buttons at the same time until you see the Apple logo.

ITunes has stopped working (during sync with ipod)

This seems to be a popular problem with varied solutions -- miss my music! Hoping for help.
When I try to sync my iPod to iTunes it gets a few tunes onto the iPod then it crashes with a Windows (Vista) popup saying that "iTunes has stopped working".
I reset the iPod to factory settings, same results.
I have uninstalled iTunes and reinstalled it, no help.
If I ask iTunes to not automatically sync, and create just one playlist and add a few tunes to it, I can get it to load about 10-20 more songs every other time or so but this is going to be painful with thousands of songs to go.
I understand from reading other posts that I may be asked to paste in information from an error log but I don't know how to get to that log.
Any help greatly appreciated.

Ah, I found this, this time, when the error popped up. Is this what's needed to figure it out?
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 9.1.1.12
Application Timestamp: 4bd8abf9
Fault Module Name: QuickTime.qts
Fault Module Version: 7.66.71.0
Fault Module Timestamp: 4ba1b0eb
Exception Code: c0000005
Exception Offset: 0082e666
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: 9c79
Additional Information 2: 18d391556384f03f39cb1810be4919d6
Additional Information 3: cbd8
Additional Information 4: 7823eb2f440e23b0eb8dcc58dcf1c44e
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

"Distiller has stopped working" when working with font managers

Don't know if this is the right forum to be posting, but there isn't a Distiller forum. I did see a post with my EXACT problem mentioned on the Distiller Server forum, to which someone disdainfully responded that the Acrobat area is where to post.
So... I've got a Vista machine, running CS3 fairly flawlessly. I get the message "distiller has stopped working" whenever browsing fonts in Font Navigator (which came with Corel X3). I thought this was unique to Font Nav, until I tried Suitcase and Font Agent Pro as other font management options. Same error message.
Firstly, I'm not clear on why distiller is running in the first place, and secondly, why messing with fonts is causing the conflict. I did find another discussion that pointed me to an update to solve the problem, but it didn't work.
Ideas?

>why distiller is running in the first place
I don't know about Vista, but in XP you use the MSCONFIG program to see what is in the startup process

My Audio has stopped and every time I try to test, It comes up with an error

I got home from work today and went to watch a movie on my new laptop (HP1000 Notebook PC) and the sound no longer works.
I had a look at the playback devices and it is connected and enabled, but when I come to test it the computer puts up an error sign (! FAILD TO PLAY TEST TONE)
I know better to play around in areas I have no clue about so can someone help me fix it?
thanks.

Hi DeathDrone,
Welcome to the HP Community! I will be happy to help with your sound problems. However, I will need some additional information to better assist you. What is your operating system? What is your product number?
Find your product number on a notebook:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
Finding your OS:
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Pavillion dm4 audio has stopped working

Hello,
The audio on my HP dm4-2015dx (Product #LW478UA) notebook has suddenly stopped working. It runs Windows 7 Home Premium and has an Intel processor. I use Chrome as a browser.
I have updated BIOS, chipset and audio drivers.
I have run the Windows audio troubleshooter and it finds no problems and that the latest versions/updates are present.
I have checked that the Mute button is not on and that volume control is at maximum, as well as checking volume control on Youtube, etc.
I have re-downloaded the audio driver and saved it to downloads, then uninstalled the active driver, shut the machine down, pulled the battery, held the power button, restarted, entered through the BIOS menu, loaded defaults, etc. then installed the driver from downloads and set it as default.
Nothing.
Both the Sound icon on the taskbar and when I go into Control Panel, Hardware and Sound, Sound, Manage Audio Devices, Playback tab actually show the sound level going up and down when I play a Youtube video, for instance. But no audio comes out of the laptop's speakers.
Can anyone please provide some guidance to correct this issue?
Thank you,
Doug

Hi Doug,
Please take a look at this document, and let me know if the troubleshooting steps help resolve your no sound from your notebook speakers.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Keyboard input has stopped working in MS Word - Yosemite

I made the mistake of upgrading to Yosemite in December.
The latest issue is in MS Word (2011, version 14.3.6)
When trying to switch between two Word documents, the keyboard input stopped working. I am using the built-in Mac keyboard. The trackpad still works, and keyboard input works in some programs (Safari), but it's impossible to type anything into Word. I've tried "Esc" in case some menu was selected, but to no avail.
I've also had this problem in EndNote.
Curious if anyone has a solution - and if you have tips for how to get Word to run faster in Yosemite, please post!
Thanks ~

There have been a couple reports of keyboard failures, mostly initial key presses. Mine initialy caused USB bus timeouts and startup problems and then failed completely. Call Apple or take the machine/keyboard back to a Apple store for a replacement.

AirDrop has stopped working after upgrading to Yosemite

Hi ,
We have recently upgraded OS to Yosemite and after that our AirDrop stopped working .. could some one please help us to get this fixed .
So far we have enabled/checked the Bluetooth sharing , file sharing etc but that did not help .
Any help is appreciated .

OS X Mail: Troubleshooting sending and receiving email messages - Apple Support

Crucial MX200 not recognized in MacPro with Yosemite

Hello I just installed a Crucial MX200 inside a 2009 MacPro, using a newertech Adaptadrive adapter. The disk doesn't show up in disk utility...
Any particular procedure I need to follow to get it recognized? ThanksAlex

Are you saying that you are not running Trim at all? What version of OS X ? Have you done a firmware upgrade to MU02 on the MX200 which has a number of major bug fixes? I would be interested to see if benchmark figures for the MX200 have improved.

Audio has stopped on my MacPro with Yosemite.

Similar Messages

Maybe you are looking for