AirDrop has stopped working after upgrading to Yosemite

Hi ,
We have recently upgraded OS to Yosemite and after that our AirDrop stopped working .. could some one please help us to get this fixed .
So far we have enabled/checked the Bluetooth sharing , file sharing etc but that did not help .
Any help is appreciated .

OS X Mail: Troubleshooting sending and receiving email messages - Apple Support

Similar Messages

Kodak ESP 3200 stopped working after upgrading to Yosemite

Kodak ESP 3200 stopped working after upgrading to Yosemite

Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite"). Perhaps it would have the same effect with some other kinds of printers that aren't supported in Yosemite. I have no information about that, one way or the other.
I have not tested the hack myself and I don't know all the possible effects. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the web administration interface of CUPS. That interface is not enabled by default, and will not be enabled by the procedure described here. Even if it were enabled, I know of no way it could be exploited, with or without the modification. Nevertheless, if you have enabled the web administration interface, you should disable it if you decide to follow these instructions. If you don't know what the web administration interface is, you haven't enabled it.

Media Keys stopped working after upgrading to Yosemite. Tried several things, what to do?

I have a Late 2013 Mac Book Pro. After upgrading to Yosemite, my media keys (F7-F12) seemed to be working funny. They worked sometimes but not during others. A simple web search seems to indicate that Chrome is the culprit which I believe is the case. However, the instructions to disable Chrome from messing with the media keys does not seem to work (as my version of Chrome does not seem to have preferences to allow me to turn off its access to the function keys). The make things weirder, when System Preferences > Keyboard has the "Function Keys" option turned on, the media keys do not work (in fact F11 clears the screen to show the desktop). And when the option is turned off, the media keys work normally as though they are turned on. Additionally, when F11 and F12 are pressed (to lower/raise the volume), it no longer plays "test sound clicks" to indicate the changed volume. I have tried a PRAM reset to no avail.
Any help is appriciated.

For my hard drive that doesn't show up at all, the problem is not Yosemite per se. It's the USB3 driver incompatibility. Try using a USB2 cable (micro USB just like an android charger cable that plugs in half of the slot on your hard drive) and it will work. Or try connecting it to an older computer that has USB2 ports on it (with the original USB3 cable) and it will work BOTH on Yosemite and Mavericks. Of course it will transfer data at USB2 speeds. Apple screwed up the drivers again so we have to wait for them to 1. receive thousands of complaints 2. wait for eternity to acknowledge there's an issue. 3. take their sweet time fixing the USB3 drivers. Until then you can get by with USB2 cables. I hope this helps!

ITunes has stopped working after upgrading to latest version.......

I recently upgraded my iTunes software but ever since I did that, I keep getting an error message that says, "iTunes has stopped working". I have included the info from the error. I am using Windows 7 64-Bit. I hope someone can help me with this. I miss my iTunes.
Problem signature:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.2.0.34
Application Timestamp: 4d6dd34e
Fault Module Name: icuuc40.dll
Fault Module Version: 4.0.0.3207
Fault Module Timestamp: 4d3b6a8e
Exception Offset: 00073335
Exception Code: c0000409
Exception Data: 00000000
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional Information 1: e043
Additional Information 2: e0436f8e95924b8cc03f3b6e8fbccbe6
Additional Information 3: 3521
Additional Information 4: 352153d1c7a000354229557e718745c3
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi and welcome to Apple Discussions, KLH.
There are a few threads discussing this issue, including this one -> http://discussions.apple.com/thread.jspa?threadID=2771714
That thread and a few others mention downloading the DLL from another site. Heres a direct link to the workaround/fix -> http://discussions.apple.com/messageview.jspa?messageID=13162938&stqc=true
Also, there was a few posts asking what time zone people are in. What timezone are you in and is the computer updated?
WTH.

Hi,catalyst control centre has stopped working after upgrading to windows 8 .

Hi,
i have a hp envy-6 notebook pc(Product number: B4P24PA#ACJ,Serial number: [Personal Information Removed] , which comes with windows 7 home basic! after upgrading to Windows 8 Pro 64-bit operating system ,my catalyst control centre ,host application has stopped workiing .
i have tried almost everything i could do but the problem still persists
on every time restarting pc it displays the above error message.
regards
abhishek rao

Hi,
Have you checked in the Device Manager to see if all drivers are installed since upgrading? (look for yellow exclamation points)
Uninstall the AMD driver and catalyst control center. Install the version located in the download section of the web support portal for your sleekbook.It will install both driver (intel and AMD) and also switchable graphics capability if it previously existed.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

My macbook pro 13 (2011) iSight stopped working after upgrade to Yosemite

After I upgraded my Macbook Pro 13' (2011) I sopped having iSight.
Tried in Photobooth, Facetime and Skype.
I reads that I don't have a camera.
Anybody has a solution??
Thanks

Hello VascoSilva,
Thanks for using Apple Support Communities.
Since you have already checked other applications, you know that the issue where your iSight camera not being detected is not application-specific. Continue troubleshooting this issue with step #2 below.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
How to Troubleshoot iSight
Take care,
Alex H.

Opening web pages in email has stopped working after upgrade of ios

I cannot open web pages in email, or indeed even scroll them. only change recently as upgrade to ios 7. I can come out of mail and open in safari, but very annoying!!

replicate the error and paste the error from defaultrace from server0\log.
regards,
snehal

Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
Test media player at www.vdat.com/techsupport/windowstest.asp

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

alisportshots wrote:
I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup. I re-tried to do an icloud backup and it again told me that "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup: never". Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
For your iCloud backup, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer. You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup. Then try again.

Why does the ipad 2 speaker stopped working after upgrading to ios 8

WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

Hi A_S85,
It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

My distributed form has stopped working after Acrobat did an update the form no longer appears in my tracker.

I had a form that auto collected data through Adobe but it has stopped working after my Acrobat X Pro did an update.
The form no longer appears in the tracker. How can this be fixed? I am using Windows 7.
It would appear that since Adobe are going to be closing the Workspace area in January 2015 that when
Acrobat did an update the ability to connect to files in the Workspace has been removed.
Is there any way to reconnect the file back to the Tracker?
Has anyone else had the same problem?
Adobe don't seem interested in helping as this question has been posted for three days and yet no response.

First and foremost thing you can do it is that reset your Firefox and after that change it to safe mode.This may be happening due to venerable links getting downloaded.
enjoy free web..... :)
regards,
Gautam sharma.

Adobe Acrobat 9.0 has stopped working (after Start Form Wizard)

Downloaded Trial for Adobe Acrobat 9.0
Tried reinstalling
Latest windows 7 patches
Adobe Acrobat 9.0 has stopped working
(after Start Form Wizard)
Windows can check online for a solution to the problem
details"
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Acrobat.exe
Application Version:    9.0.0.332
Application Timestamp:    4850eb76
Fault Module Name:    MakeAccessible.api
Fault Module Version:    9.0.0.332
Fault Module Timestamp:    4850e54e
Exception Code:    c0000005
Exception Offset:    000e1059
OS Version:    6.1.7600.2.0.0.256.1
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
===============================
===============================
SYSTEM INFORMATION
=========================
System Parameters
Available Physical Memory: 1429660 KB
Available Virtual Memory: 1912212 KB
BIOS Version: DELL   - 42302e31
Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
    Version: 8.00.7600.16385 (win7_rtm.090713-1255)
    Creation Date: 2009/07/13
    Creation Time: 4:43:32 PM
Default Mail: Microsoft Office Outlook
    mapi32.dll
    Version: 1.0.2536.0 (win7_rtm.090713-1255)
Graphics Card: Intel(R) G33/G31 Express Chipset Family
    Version: 8.14.10.1930
    Check: Not Supported
Installed Acrobat: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:25:18 AM
Installed Acrobat: C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
    Version: 9.3.2.163
    Creation Date: 2010/04/03
    Creation Time: 10:57:52 PM
Locale: English (United States)
Monitor:
    Name: Intel(R) G33/G31 Express Chipset Family
    Resolution: 1024 x 768 x 75
    Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows Vista
OS Version: 6.1.7600
Page File Space: 4194303 KB
Processor: x86 Family 6 Model 23 Stepping 7 GenuineIntel ~2493 Mhz
System Name: DELLINSPIRON
Temporary Directory: C:\Users\alan\AppData\Local\Temp\
Time Zone: Pacific Standard Time
Total Physical Memory: 2097151 KB
Total Virtual Memory: 2097024 KB
User Name: alan
Windows Directory: C:\Windows
Installed Plugins
=================
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Annots.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 1:59:50 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\EScript.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:05:18 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\PPKLite.api
    Version: 9.0.0.0
    Creation Date: 2008/06/12
    Creation Time: 2:08:24 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\SendMail.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:17:10 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Updater.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:00:30 AM

To go along with Michael's suggestion, something like AA9.2 is needed for X64 systems I think. Also, be careful. Acrobat is not licensed for use on a server. Using it as a user is fine, but not as a server application. Read the license carefully.

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

Follow these steps:
go to system preferences.. Open Network..
CONFIGURATION: DEFAULT
TELEPHONE NUMBER : #99*
leave account name and password columns blank
Now go to ADVANCED
IN MODEM MENU
VENDOR : GENERIC
MODEL : GPRS / 3G
Press ok
Then CONNECT.. Enjoy.

My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?

My iPad has stopped working after trying unsuccessfully to instal iOS5. All that's currently showing on the iPad screen is a white USB cable with a thick arrow pointing towards the iTunes logo (black double note within a white rimmed circle and a blue background).I cannot switch it off and have seemingly lost everything that was on it.
Please help!

That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
iTunes: Restoring iOS software

AirDrop has stopped working after upgrading to Yosemite

Similar Messages

Maybe you are looking for