Audio in .WAV format not working

I was given an audio file that was made on Pro Tools, and burned as an uncompressed .wav file. I can import it into FCP 4.5 HD, but cannot get it to render. The red bar shows over it that it needs to be rendered, but no way of selecting it will make it render. I've tried exporting it to a quicktime format and I get an operation failed message. If I open the file with Quicktime I can play it though. I'm very confused. Please help me solve this.
Thanks
Nick

its clearly in an embeded format that is not supported by FCP ... try transcoding it to 48kHz AIFF using Soundtrack Pro

Similar Messages

  • Audio CD import is not working the cd is ejected before itunes can read it

    audio CD import is not working the cd is ejected before itunes can read it. Does anyone know how to fix this?
    Lainey

    Does this happen with all cd's or one in particular?
    Reset the SMC http://support.apple.com/kb/HT3964
    Reset the PRAM http://support.apple.com/kb/HT1379
    Try a cleaning disc. You can get them at places like Radio Shack.
    If nothing helps your optical drive has probably failed. You can replace it or purchase an inexpensive external drive. Don't buy the Apple SuperDrive as it won't work with macs that have a built in drive.

  • Beats Audio Control Panel software not working after Windows 10 upgrade.

    Beats Audio Control Panel software not working after Windows 10 upgrade.  the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties  I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device?  IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

    Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at  https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver.  I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update.  After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

  • HT6114 my audio midi setup is not working correctly since the install of maverick os

    my audio midi setup is not working correctly since the install of maverick os

    The upgrade may have reset to default settings ..
    Check System Preferences > Sounds > Output
    Make sure the correct device is selected and the Mute box is not checked.

  • Audio preview in Finder not working

    Hi,
    I have a strange problem. My finder don't want to play any audio files (wav, mp3
    , m4a,... ) Quick Look is still working but, in stead of having a preview (with
    the play button in the middle of the file) it only show a standard logo without
    the play button available.
    http://img8.imageshack.us/img8/2444/capturedcran20110306174.png
    (As you can see, 3 of 7 files cannot be previewed)
    Message was edited by: zoneur

    I'm experiencing the same thing but with all kinds of files that have shown a preview in snow leopard: pictures, PDF-documents, music (with album art). It seems that previews are not created automatically whenever I change the name of a file or edit it in any other way, the preview shows up instantly. Rebooting works, too.
    This is really annoying and a little online search shows, several people are having the same problem. As far as I know, there's no fix yet.

  • Wav format not recognized

    I have a Creative Zen that I use for recording my stand-up gigs. I used to use my phone which records in MP3 format from which I imported into Cubase and cleaned up the sound and tightened the envelope.
    The wav created by Zen is not recognized by Cubase nor by Windows Media Player. Only Zen plays it. I want to import to Cubae, work on it and save as mp3.
    How can I get other programs to recognize this Zen wav format?
    Kev

    I have a Creative Zen that I use for recording my stand-up gigs. I used to use my phone which records in MP3 format from which I imported into Cubase and cleaned up the sound and tightened the envelope.
    The wav created by Zen is not recognized by Cubase nor by Windows Media Player. Only Zen plays it. I want to import to Cubae, work on it and save as mp3.
    How can I get other programs to recognize this Zen wav format?
    Kev

  • Some internet radio stations with http protocol and mp3 format not working in AIR 2.0

    First, i am sorry for my bad english. When I publish swf for Flash 10 player all stations in my list works. If I publish them for AIR 2.0 stations with adress end ":XXXX", where XXXX is port number, they cannot work. What is problem? Thanks in advance.

    Perhaps,  in the previous post I wasn't clear enough, so I'll try to make it better: I am using the Adobe Flash CS5 and AS3. I wrote the script for listening internet radio stations. In the station list I named only those that use HTTP protocol and mp3 format, cause I know the limits of Flash in audio streamings. If I publish FLA file in SWF for Flash 10 player all the stations can be listened.. If swf file is made for AIR 2.0 there's a problem: the stations with adress  http://xxx.xxx:xxx/<something> can be listened, and those without extension behind the port number (:xxx) can not. Main parts of the script are:
    startButton.addEventListener(MouseEvent.CLICK, listen);
    req.url= "<adress>";
    snd = new Sound();
    snd.load(req);
    private function listen(event:MouseEvent):void {
    req = snd.play();
    Example:
    adress=http://scfire-ntc-aa08.stream.aol.com:80/stream/1010 - working
    adress=http://www.radionovosti.rs:443/radionovosti56s.mp3 - working
    adress=http://sh1.beotel.net:8002 - not working
    adress=http://77.105.36.58:8881 - not working
    It would be great if someone of Adobe employers explain to me what is the problem. Thanks.

  • DTS (5.1) Audio Through Airport Express: Not Working

    I imported some DTS-encoded WAV files into iTunes, to stream to my audio system via an Airport Express. The AE is connected to the preamp via optical, the WAV files were not converted or modified in any way, and the volume is @ 100% in iTunes.
    The preamp receives the files and the DTS icon lights up, so all seems to be good... except the audio output is 2.0 only. As a test I converted the files to Apple Lossless (since I know the AE has to make that conversion), same result.
    As another test I turned down the volume in iTunes and the audio became white noise, another indication that the files are DTS.
    If I burn an audio CD using iTunes and the same WAV files, and play them on my OPPO player I get 5.1, the final and conclusive proof that the files are properly encoded.
    I know I've read that streaming DTS-encoded audio via the Airport Express is possible, so I'm not sure what I might be doing wrong.
    Any ideas?

    Hi,
    I experienced some DTS files in iTunes, with my AirPort Express some months ago, it was working fine on my Marantz receiver. A few days ago I wanted to listen to them again, only white noise... I wanted to rip by myself a DTS-CD, therefore I found this out. Apparently since AirTunes has been turned to AirPlay, it's not working anymore (?) / the same way.

  • -wap-input-format not working properly in Nokia 58...

    I didn't know where to report this bug, so I'll try here.
    When you create web pages for mobile use you can set various input formats in form elements.
    This helps the user by setting up and validating input even before it reaches the server.
    One of these is the "-wap-input-format".
    I recently ran into a problem with at page that I couln't access from my Nokia 5800 and I decided to figure out why.
    The page has an input field like this:
    <input name="somenumber" type="text" style='-wap-input-format: "10N"' />
    (Which basically tells the phone that in this field you can only enter 10 digits.)
    However, even when I enter exactly 10 digits, the field turns red, and the phone refuses to continue until I "correct my error". The only input that the phone will allow is an empty field.
    However... if the field is made like this:
    <input name="somenumber" type="text" style='-wap-input-format: "NNNNNNNNNN"'/>
    everything works just as it should.
    But... the first type is also correct according to standards and should work too.
    My phone has the V21.0.025 firmware. (and no new updates available yet for this product code.)
    Does anyone know where this bug can be reported, or if its fixed in newer firmware?

    The solution is NOT changing the webpage. The page already follows the correct standard! 
    It its the browser in the XM5800 that has a problem. My example clearly shows this. The phone acts inconsistent depending on the syntax in the wap inputfield. Both of the above syntaxes are supposed to give the same result. But one works, and the other, which is probably the one most often used, does not work at all.
    Right now I use the Opera browser instead to access that page.(Because Opera does not have this bug.)
    My post was simply an attempt to notify Nokia of this problem...  Because I can't find any place to report bugs.
    And at the same time ask users who have the newer version of the firmware, if they know if this problem still exists.
    Message Edited by Timod on 08-Nov-2009 09:04 PM

  • I have audio trouble,right output not working

    I have an Iphone 4s..
    At first i thought that my headphone jack is not working good,because the left earphone is working and the right one isn't,when i jack it in...
    I tryied many headphones just to make shore that it's not something else,but after many tries i realised that the jack is out..
    and this evening i went to iStyle to try some Audio Docks,and when i put the phone on it it does play music,but only on the left speaker...
    I thought maybe it's the dock,but then i tried three more and it was the same on all of them.. only the left one was working..And now i would like to know please what could be the trouble,and how can i solve it?
    Thank you!
    PS: the problem with the jack was there even before i updated to 7.0....

    Well it sounds like a hardwrae issue to me but you could troubleshoot the software
    Reset the phone first by holding the power button and the home button until it shuts down then turn it back on and try again.
    If it persists then backup your phone to iTunes and set it up as new.
    If it still happens then it is a hardware issue, and you will need service.
    If it does NOT happen when you set up as new, then restore from your backup. if the issue comes back then there is something wrong with your backup and you need to set it up as new again and start from scratch.

  • Audio Jack in front not working.

    Hi, when I bought my HP Pavilion p6823w Desktop PC, from walmart I hooked it up correctly.  When I booted for the first time, I got a Blue Screen of Death, and the problem system repair said it was my IPOD cord was plugged into a USB port.  Without the IPOD hooked up to it.  I couldn't boot up, so I ran the system repair.  the reason I didn't take it back to Wal-mart was because it worked fine without the Internet when I booted up again.  I also bought a Belkin Wireless N Adapter for my Router.  It worked fine with the internet. 
    Please read the whole thing, because this is all relative to why my audio jack isn't working. Thank you.
    Until I started using the internet for long periods of time, I received problems.
    For instance, it would disconnect me from the internet without telling me on the bottom side bar, it would tell me it's still working, when I keep getting web pages that are telling me the Internet Server is not found.
    Another instance, when playing League of Legends, my latency would go up to 10,000. This is not normal.
    The third instance, it would let me still play the game, but have high latency and lag out eventually.
    The fourth instance, I cannot download any files on the computer anymore, even if the internet is connected.
    The fifth instance, my monitor when it goes to sleep, will only display the background image, without any icons.
    This must be a hardware problem, if the monitor won't load the desktop icons or start menu.
    To make it work again, I have to turn it off manually with the button, and turn it back on again. And then it works.
    I didn't notice this problem till after the 30 days of returning policy to walmart, because I turned off my computer when I was done using it.
    The sixth instance, I can disable the network adapter, and re-enable it to make the internet work for a very short period of time, with the same errors of not being able to display web sites.
    The seventh instance, I reformatted my computer because I thought it was a virus that norton couldn't find. It still had the same problems, but after the first few days it started up again.
    The eighth instance, I received w WinSAT repair, because my game was freezing completely for about one second or two seconds.
    The ninth instance, I contacted HP Support VIA Phone, and they could not fix the problem.
    I enabled High Performance Power Supply.
    I reset the IP Address.
    I cleaned my temporary files.
    I ran Norton Anti-Virus, found nothing.
    I ran Hijack This, a program to see what program files are being used.
    I ran HITMAN PRO. Found nothing.
    I ran firmware updates for my router, is was up to date.
    I changed the settings to WEP after, to see if it was the router.
    I checked all my other computers to see if it was the internet, it is not the ISP.
    I also changed the network name, so the interference with temporary files, wouldn't interfere.
    I used other browsers, and had the same problem.
    Some websites would load halfway, and need a refresh.
    I have not opened the desktop.
    I tried exchanging the Belkin Wireless N Adapter, I had an older one I bought before, and when I plug it in, it doesn't recognize the device.
    I re-plugged the new one in the USB port, and it worked for a few minutes before returning to the same errors of Internet Server Not Found.
    I am confused, because it's not the Wireless N Adapter. My browser, my ISP, my router, my USB port, because the other's work and so does this one.
    My reformat didn't work, and I experience this problem everyday, but now downloading files doesn't work even when all other web pages load. This means, there is something wrong with my hardware.  Because the other browsers won't download either.
    I'm also using my laptop right now, to make this post, so my internet on all my other computers works fine.
    I'm interested if there is a problem with the hardware when I bought the computer, because there is no real fix for this problem.  Each time I get on the phone with TECH SUPPORT, they ask if it's working. And sometimes it does, but then after a few hours it goes back to the same errors. I can't keep calling Tech Support, telling them it's not working when it starts working randomly, then going back to the same errors. Please help!
    Also, TECH SUPPORT ignored my monitor problem.  They didn't say anything about how to fix this problem. I hate having to turn off the monitor and turn it back on because this is  a brand new computer. I still have the receipt, warranty and I'm tired of explaining the problem to different people from TECH SUPPORT.
    Also, my audio jack in the front doesn't work.

    Hi,
    Did you burn a set of the HP Recovery Disks?  You mentioned that the reformat failed. Is that correct? Did you try a full HP Recovery?  If not, then backup your data to external media.  Boot up to the HP Blue screen and first try diagnostics and see how that goes.  If that is successful, then boot again up to the HP blue screen and try Recovery.
    If you don't have a set of the HP Recovery Disks and the Recovery process fails from the HP blue screen then you need to order a set of the HP Recovery Disks from HP. HP Recovery Disks.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Audio Line-In Port Not Working

    I plugged a Shure mic into the Audio-In Port and is doesn't work. I'm using FCP Voice-Over but I get no audio on Soundtrack either. Worked with all the settings and preferences for audio. Also tested a second mic which also doesn't work. I read some people had problems with Audio-In Port after upgrading to 10.4.10. I ran a check for audio updates, there are none that I haven't installed. Why can't I seem to make a simple mic work when it's been so simple previously?

    Your Mac does not have a microphone input, only a line-level input (in fact, no Mac has included a microphone input in quite a while). So you'll need 1) a self-powered microphone that outputs line level, 2) a USB microphone, or 3) an external audio device that supports microphone inputs, either a mixer that will give you line-level output or a USB audio input device. One possibility for a USB device that works for many people and that is relatively inexpensive (ca $40.00 US) is the Griffin iMic. It works with any standard personal computer microphone.

  • M-Audio MIDISPORT UNO USB Not Working With Snow Leopard

    My Snow Leopard installation worked fine except until I plugged in my MacBook to my Casio Privia with the M=Audio MIDISPORT UNO USB cable to run GarageBand. I'm getting a MIDI error which states it can't work with the latest operating system. It doesn't surprise me though for all the software and hardware driver updates that have to catch up to such a new OSX 10.6. I went to the M-Audio site to download the latest driver, but the drivers only were compatible with OSX10.5.8.
    This is an alert at the site
    Mac OS X 10.6 Snow Leopard Support Coming Soon
    Avid/M-Audio working closely with Apple to offer support for OS X 10.6
    Avid/M-Audio is pleased to hear that Apple has released Mac OS X 10.6 Snow Leopard. We’ve been working closely with Apple to bring Snow Leopard support to the M-Audio® product line, as well as the Pro Tools® product line and extended product families. We ask that all existing Mac users please wait to upgrade until we officially announce Snow Leopard support. Stay tuned for more information in the coming weeks.
    This is a bit of a concern, because I need to get GarageBand running again with the MIDI hook ups. Is there a work around anyone knows about to get MIDI working with Snow Leopard.
    Thanks Steve

    I ran into a similar problem. I discovered one thing which may help you out though. It works OK with my Yamaha P200 keyboard but it does not work with my Yamaha NP30 keyboard. I looked at the MIDI stream and the only difference seems to be that the NP30 sends a continuous stream of MIDI clock, whereas the P200 does not. My theory is that this clock stream is somehow confusing the driver. I can't seem to disable the MIDI clock on my NP30 but if your Privia has the ability to disable MIDI clock, then it may be worth a try as it will probably fix the problem until they come out with the proper drivers.

  • Spry menu formatting not working correctly in DW CS6

    Hello,
    I've installed  a spry menu but the formatting is not working correctly.
    The hover colour works correctly but the selected menu item  colour does not change. Only the home menu tab remains coloured.
    Please can anyone suggest what might be wrong?
    Thank you.
    Robbieg

    Ah. OK. I've found the problem. On the every page  I've got a class=current attribute to the <a> tag for the  home menu item.
    Now, since this menu code is in a template as part of the top part of every page, it means that this is also included on all the other pages of the site. How do I get this attribute  to be different on each page that uses the template?
    Thank you.
    Robbieg

  • Iweb Hyperlink Format not working!

    Hello,
    I am using version 3.0.3 of iWeb. I think this must be the latest version.
    No matter what I do, I cannot get the FORMAT tab to do anything within the hyperlinks section of the inspector.
    Let's I want to change the color of how a button behaves (rollover, click etc), I click on that element (text, box, anything), I select Inspector, I go to hyperlink tab, and the FORMAT subtab is not working.
    Has anyone else had this issue?
    What do i need to do??
    I'm totally frustrated.
    Thanks

    Hello Old Toad,
    Thanks for your response, but believe me, i've tried EVERYTHING.
    I've selected Text, I've highlighted the text, I've gone to the INSPECTOR window, selected the hyperlink tab, and the FORMAT TAB always remains INACTIVE: i.e. all the buttons are dark grey and do nothing when I press them.
    I paid for this software upgrade also (iLife 11).
    I really like iWeb actually, it produces what I want, except this formatting of URLs (and perhaps sub-menus).
    Im getting really desperate to find why my FORMAT of hyperlinks is not working.
    Thanks

Maybe you are looking for