Audio issues after upgrading to OS X 10.10 (Yosemite)

Hello,
I have been facing audio issues after upgrading to OS X 10.10
- No sound in VLC
- Re-booting with Option-Command-P-R did not work
- System sounds are fine
- Quicktime Player works just fine
I tried:
- Plugging in earphones while video was playing on VLC
- F10/F11/F12 while video was playing on VLC
- Re-boot with Option-Command-P-R keys (found on a thread elsewhere)
- Played something in Garage Band (found on a thread elsewhere) and restarted VLC
None of the above solved the issue
Any one else facing similar issue with VLC on 10.10?
How did you manage to fix this?
I am running VLC 2.1.5 btw.
Thanks in advance!

Shockwave says at the present moment not to be compatible with OS X 10.9 Mavericks.
Youtube, QuickTime, all play with no sound at all.

Similar Messages

Audio Issues After Upgrade to linux 3.9.2-1

I did an upgrade today and now I'm having an issue with my audio. What happens is it'll sound like it is skipping every few seconds. What I notice is the headphone symbol flickers on in the GNOME top bar, as if my computer thinks the headphones got plugged in and then removed vary rapidly. My first thought was poor connection to the wire going to my speakers, but it is fine, the speakers work with my laptop no problem, and the same problem comes with my headphones. Also I didn't have this problem before the update.
I was having trouble finding any info elsewhere about it, was wondering if anyone had a similar issue. The update I suspect is the linux kernel 3.8.11-1 -> 3.9.2-1, though I suppose I have no basis for suspecting it. Below is the pacman.log for today when I upgraded.
[2013-05-12 15:52] [PACMAN] Running 'pacman -Syy'
[2013-05-12 15:52] [PACMAN] synchronizing package lists
[2013-05-12 15:52] [PACMAN] Running 'pacman -Syu'
[2013-05-12 15:52] [PACMAN] synchronizing package lists
[2013-05-12 15:52] [PACMAN] starting full system upgrade
[2013-05-12 15:56] [PACMAN] upgraded ca-certificates-java (20121112+nmu2-1 -> 20121112+nmu2-2)
[2013-05-12 15:56] [PACMAN] upgraded nss (3.14.3-2 -> 3.14.3-3)
[2013-05-12 15:56] [PACMAN] upgraded evolution-data-server (3.8.1-1 -> 3.8.2-1)
[2013-05-12 15:56] [PACMAN] upgraded libvpx (1.1.0-1 -> 1.2.0-1)
[2013-05-12 15:56] [PACMAN] upgraded ffmpeg (1:1.2-2 -> 1:1.2.1-1)
[2013-05-12 15:56] [PACMAN] upgraded giflib (4.1.6-5 -> 4.2.1-1)
[2013-05-12 15:56] [PACMAN] upgraded perl-error (0.17019-1 -> 0.17020-1)
[2013-05-12 15:56] [PACMAN] upgraded git (1.8.2.2-1 -> 1.8.2.3-1)
[2013-05-12 15:56] [PACMAN] upgraded gnutls (3.1.10-1 -> 3.1.11-1)
[2013-05-12 15:56] [PACMAN] upgraded gvfs (1.16.1-1 -> 1.16.1-2)
[2013-05-12 15:56] [PACMAN] upgraded libimobiledevice (1.1.4-2 -> 1.1.5-1)
[2013-05-12 15:56] [PACMAN] upgraded gvfs-afc (1.16.1-1 -> 1.16.1-2)
[2013-05-12 15:56] [PACMAN] upgraded gvfs-obexftp (1.16.1-1 -> 1.16.1-2)
[2013-05-12 15:56] [PACMAN] upgraded hdf5 (1.8.10-1 -> 1.8.10_patch1-1)
[2013-05-12 15:56] [PACMAN] upgraded imagemagick (6.8.5.3-1 -> 6.8.5.6-1)
[2013-05-12 15:56] [PACMAN] upgraded nvidia-utils (313.30-2 -> 319.17-1)
[2013-05-12 15:56] [PACMAN] upgraded nvidia-libgl (313.30-2 -> 319.17-1)
[2013-05-12 15:56] [PACMAN] upgraded qt4 (4.8.4-17 -> 4.8.4-18)
[2013-05-12 15:56] [PACMAN] upgraded soprano (2.9.1-1 -> 2.9.2-1)
[2013-05-12 15:56] [PACMAN] upgraded upower (0.9.20-1 -> 0.9.20-2)
[2013-05-12 15:56] [PACMAN] upgraded kdelibs (4.10.2-4 -> 4.10.3-3)
[2013-05-12 15:56] [PACMAN] upgraded lib32-nvidia-utils (313.30-2 -> 319.17-1)
[2013-05-12 15:56] [PACMAN] upgraded lib32-nvidia-libgl (313.30-2 -> 319.17-1)
[2013-05-12 15:56] [PACMAN] upgraded lib32-systemd (202-1 -> 203-1)
[2013-05-12 15:56] [PACMAN] upgraded libgpod (0.8.2-6 -> 0.8.2-7)
[2013-05-12 15:56] [PACMAN] upgraded libpcap (1.3.0-3 -> 1.4.0-1)
[2013-05-12 15:56] [PACMAN] upgraded libpipeline (1.2.2-1 -> 1.2.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libreoffice-en-US (4.0.2-4 -> 4.0.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libreoffice-common (4.0.2-4 -> 4.0.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libreoffice-base (4.0.2-4 -> 4.0.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libreoffice-calc (4.0.2-4 -> 4.0.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libreoffice-draw (4.0.2-4 -> 4.0.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libreoffice-gnome (4.0.2-4 -> 4.0.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libreoffice-impress (4.0.2-4 -> 4.0.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libreoffice-kde4 (4.0.2-4 -> 4.0.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libreoffice-math (4.0.2-4 -> 4.0.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libreoffice-postgresql-connector (4.0.2-4 -> 4.0.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libreoffice-sdk (4.0.2-4 -> 4.0.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libreoffice-sdk-doc (4.0.2-4 -> 4.0.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libxml2 (2.8.0-1 -> 2.9.1-1)
[2013-05-12 15:56] [PACMAN] upgraded libreoffice-writer (4.0.2-4 -> 4.0.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libtirpc (0.2.2-4 -> 0.2.3-1)
[2013-05-12 15:56] [PACMAN] upgraded libxfce4util (4.10.1-1 -> 4.10.1-2)
[2013-05-12 15:57] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-05-12 15:57] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-05-12 15:57] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-05-12 15:57] [ALPM-SCRIPTLET] ==> Starting build: 3.9.2-1-ARCH
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-05-12 15:57] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-05-12 15:57] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-05-12 15:57] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-05-12 15:57] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-05-12 15:57] [ALPM-SCRIPTLET] ==> Starting build: 3.9.2-1-ARCH
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-05-12 15:57] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-05-12 15:57] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-05-12 15:57] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-05-12 15:57] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-05-12 15:57] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-05-12 15:57] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-05-12 15:57] [PACMAN] upgraded linux (3.8.11-1 -> 3.9.2-1)
[2013-05-12 15:57] [PACMAN] upgraded lirc-utils (1:0.9.0-43 -> 1:0.9.0-45)
[2013-05-12 15:57] [PACMAN] upgraded lm_sensors (3.3.3-2 -> 3.3.3-3)
[2013-05-12 15:57] [PACMAN] upgraded sbcl (1.1.4-1 -> 1.1.7-1)
[2013-05-12 15:57] [PACMAN] upgraded maxima (5.29.1-1 -> 5.30.0-1)
[2013-05-12 15:57] [PACMAN] upgraded nvidia (313.30-5 -> 319.17-2)
[2013-05-12 15:57] [PACMAN] upgraded pam (1.1.6-1 -> 1.1.6-3)
[2013-05-12 15:57] [PACMAN] upgraded pixman (0.28.2-1 -> 0.30.0-1)
[2013-05-12 15:57] [PACMAN] upgraded rhythmbox (2.99.1-1 -> 2.99.1-2)
[2013-05-12 15:57] [PACMAN] upgraded rpcbind (0.2.0-9 -> 0.2.0-11)
[2013-05-12 15:57] [PACMAN] upgraded rsync (3.0.9-5 -> 3.0.9-6)
[2013-05-12 15:57] [PACMAN] upgraded sbc (1.0-1 -> 1.1-1)
[2013-05-12 15:57] [ALPM-SCRIPTLET] if you are running x86_64, you need the lib32 opt depends for your driver
[2013-05-12 15:57] [ALPM-SCRIPTLET]
[2013-05-12 15:57] [ALPM-SCRIPTLET] if you are having problems with the steam license, remove .steam and .local/share/Steam
[2013-05-12 15:57] [PACMAN] upgraded steam (1.0.0.38-1 -> 1.0.0.39-1)
[2013-05-12 15:57] [PACMAN] upgraded suitesparse (4.0.2-1 -> 4.2.1-1)
[2013-05-12 15:57] [PACMAN] upgraded thunar-archive-plugin (0.3.0-2 -> 0.3.1-1)
[2013-05-12 15:57] [PACMAN] upgraded thunar-media-tags-plugin (0.2.0-2 -> 0.2.1-1)
[2013-05-12 15:57] [PACMAN] upgraded virtualbox-guest-modules (4.2.12-3 -> 4.2.12-5)
[2013-05-12 15:57] [ALPM-SCRIPTLET] In order to use the new version, reload all virtualbox modules manually.
[2013-05-12 15:57] [PACMAN] upgraded virtualbox-host-modules (4.2.12-3 -> 4.2.12-5)
[2013-05-12 15:57] [PACMAN] upgraded xfce4-mixer (4.10.0-1 -> 4.10.0-2)
[2013-05-12 15:57] [PACMAN] upgraded xfce4-power-manager (1.2.0-3 -> 1.2.0-4)
Thanks,
-Koopa
EDIT: Been searching for a while and found some others with the same problems, but no solutions still. My hardware posted below.
$ cat /proc/asound/cards
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfe500000 irq 16
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfe080000 irq 25
$ lspci | grep Audio
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio Controller (rev a1)
EDIT: So, after some not so successful searching I decided to test my suspicion. I downgraded from linux 3.9.2-1 back to 3.8.11-1. There were a few dependancies, the virtualbox guest and host modules as well as an update to nvidia. To be safe I downgraded all the nvidia updates that had happened. pacman log below.
[2013-05-12 22:35] [PACMAN] Running 'pacman -U linux-3.8.11-1-x86_64.pkg.tar.xz nvidia-313.30-5-x86_64.pkg.tar.xz virtualbox-guest-modules-4.2.12-3-x86_64.pkg.tar.xz virtualbox-host-modules-4.2.12-3-x86_64.pkg.tar.xz nvidia-utils-313.30-2-x86_64.pkg.tar.xz nvidia-libgl-313.30-2-x86_64.pkg.tar.xz lib32-nvidia-utils-313.30-2-x86_64.pkg.tar.xz lib32-nvidia-libgl-313.30-2-x86_64.pkg.tar.xz'
[2013-05-12 22:35] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-05-12 22:35] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-05-12 22:35] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-05-12 22:35] [ALPM-SCRIPTLET] ==> Starting build: 3.8.11-1-ARCH
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-05-12 22:35] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-05-12 22:35] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-05-12 22:35] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-05-12 22:35] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-05-12 22:35] [ALPM-SCRIPTLET] ==> Starting build: 3.8.11-1-ARCH
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-05-12 22:35] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-05-12 22:35] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-05-12 22:35] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-05-12 22:35] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-05-12 22:35] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-05-12 22:35] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-05-12 22:35] [PACMAN] downgraded linux (3.9.2-1 -> 3.8.11-1)
[2013-05-12 22:35] [PACMAN] downgraded nvidia-utils (319.17-1 -> 313.30-2)
[2013-05-12 22:35] [PACMAN] downgraded nvidia-libgl (319.17-1 -> 313.30-2)
[2013-05-12 22:35] [PACMAN] downgraded nvidia (319.17-2 -> 313.30-5)
[2013-05-12 22:36] [PACMAN] downgraded virtualbox-guest-modules (4.2.12-5 -> 4.2.12-3)
[2013-05-12 22:36] [ALPM-SCRIPTLET] In order to use the new version, reload all virtualbox modules manually.
[2013-05-12 22:36] [PACMAN] downgraded virtualbox-host-modules (4.2.12-5 -> 4.2.12-3)
[2013-05-12 22:36] [PACMAN] downgraded lib32-nvidia-utils (319.17-1 -> 313.30-2)
[2013-05-12 22:36] [PACMAN] downgraded lib32-nvidia-libgl (319.17-1 -> 313.30-2)
So, now how would I go about determining which package broke the audio? I had suspected the linux kernel update, but I suppose the nvidia update could have done it to. If necessary I'd love to file a bug, but I want to make sure I can describe it efficiently. (I've never filed a bug before.)
EDIT (5/31/2013): Currently some work arounds that may alleviate your issue, the one that worked for me is to disable auto-mute in alsamixer. The problem however does still exist in the latest kernel upgrade, 3.9.4-1. Bug report is still open, and can be found here: https://bugs.archlinux.org/task/35262
Thanks,
-Koopa
Last edited by Koopa (2013-05-31 04:47:20)

Chehri wrote:
Koopa wrote:
Since others have reportedly seen the same issue, and I finally got to my computer after this initial post, I've filed a bug. You can find it here:
https://bugs.archlinux.org/task/35262
Thanks,
-Koopa
Thanks for reporting it. Slight note though, I had no noise at all (no flickering).
If someone could update this thread when a new kernel works, that'd be great! I put it in my IgnorePkg for the moment.
Is there anyway to edit a bug report? I don't see anything obvious, but I'm exhausted, so maybe my brain isn't working properly. Anyway, if there isn't, I'd just leave a comment on the report with the fact that you hear nothing, not even the flicker.
And thanks for reminding me to add it to IgnorePkg, forgot to/never have had to do that before. But I'll be sure to post here when I know it's fixed.

MacBook Pro Retina Audio issue after upgrade to Mountain Lion

Got my new MacBook Pro with Retina display just over a week ago now and was working brilliantly up until last night.
I upgraded to Mountain Lion via the App store as I already bought it for my other macs and didnt wish to wait to redeem my free copy.
Ever since the update the audio develops a stutter on any audio file no matter what format, program used or at any volume.
I am hoping this is just a software isssue and can be easily rectified. I have restarted it, tried a different user and pretty much anything else I could think of before posting this.
Any help would be greatly recieved.
Thanks
Luke

Using gfxCardStatus to force discrete graphics stops the audio stutter on my machine. I already returned one retina mbp for three dead pixels... Strange that graphics switching has something to do with the audio, especially since it was stuttering every 15 seconds or so, not when the nvidia kicked in...

Speakerphone audio issues after iOS7 upgrade

Is anyone else having speakerphone issues after upgrading to iOS7? I have a iP4 and when used normally, transmit audio is normal. When switching to speakerphone, transmit audio in non-existent and person on other end cannot hear me. Thoughts?

I also have a Mac Air 2012, tried charging from Mac Air and it's now charging! Mac Air is now charging from the same wall unit location which I used for iPad 2 - so nothing wrong with the wall unit.
I just wish i could charge as fast from wall unit as with iOS 6. Any further guidance is greatly appreciated.

Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query

Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
        INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
        FROM COSP CLIENT SPECIFIED
        WHERE GJAHR IN SELR_GJAHR
          AND KSTAR IN SELR_KSTAR
          AND LEDNR EQ '00'
          AND OBJNR IN SELR_OBJNR
          AND PERBL IN SELR_PERBL
          AND VERSN IN SELR_VERSN
          AND WRTTP IN SELR_WRTTP
          AND MANDT IN MANDTTAB
        GROUP BY (GROUP_LIST).
   LOOP AT I_COSP      .
     COSP                           = I_COSP      .
     PERFORM PCOSP       USING I_COSP-_COUNTER.
     CLEAR: $RWTAB, COSP                          .
     CLEAR CCR1S                         .
   ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.

Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
                   endselect.
   SELECT
into table
   for all entries in table
where.
   use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
    e.g in your case
          sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya

Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

Issues after Upgrade from Oracle 10.1.0.5 to 10.2.0.5 in Windows Server2003

Good Morning Good People,
I have run in to some issues after upgrading my 10.1.0.5 database to 10.2.0.5. Initially after the firtst upgrade from 10.1.0.5 to 10.2.0.0 one has to run Critical Patch set 4 to get to 10.2.0.5. Well after initial up grade everything worked fine. I could connect to the database from within the server as well as remotely through SQL*PLUS client. However, after completeing the patch I'm still able to connect to the database from within the server, but remotely i get the following error:
ORA-12514 : TNS Listener does not currently know of service requested in connect descriptor.
I also get Error ORA-12505: TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=mcquery2)(protocol=tcp)(port=1521))(connect_data=(sid=mcquery)(server=dedicated)))
I've tried serval different things to trouble shoot the issue but nothing seems to work.
If anyone has run into s similar issue please help. This is ruining my weekend! LOL!
Edited by: user10835577 on Aug 29, 2010 9:15 AM

From the client or the server?
SERVER:
tnsnames.ora:
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
FROM REMOTE SQLPLUS Client:
tnsnames.ora
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Client_3)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = cotsdot370.cotsdot.dom)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
Thanks,
Malcolm
Edited by: user10835577 on Aug 29, 2010 12:01 PM

IPhone 4s issues after upgrading to IOS 8

Have few issues after upgrading to iOS 8
- Phone hangs every few hours, reboots automatically
- Bluetooth does not work properly (call does not get disconnected or even if disconnected on phone, the car bluetooth shows call is on)
- Searching for contacts is a problem
- Apps hang (especially facebook)
Any way to go back to iOS 7 ?
Any other tips / tricks appreciated..
Venkat

No way to come back to iOS 7 ...
But did you tried to reset all settings (general -> reset -> all settings) ?
For me iOS 8 was a mess on a 5S, especially car Bluetooth, and all works now fine after resetting the settings (all settings, not only network settings).

Autoconfig issue after upgrading 12.1.1 to 12.1.3

Hi all,
I am getting below mention autoconfig issue after upgrading 12.1.1 to 12.1.3.
jtfictx.sh started at Mon Mar 28 08:28:50 EDT 2011
SQL*Plus: Release 10.1.0.5.0 - Production on Mon Mar 28 08:28:50 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Connected.
DECLARE
ERROR at line 1:
ORA-29858: error occurred in the execution of ODCIINDEXALTER routine
ORA-20000: Oracle Text error:
DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operation
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 665
ORA-06512: at "SYS.DBMS_SQL", line 1199
ORA-06512: at line 96
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Product
ion
With the Partitioning, OLAP, Data Mining and Real Application Testing options
jtfictx.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
i got below mention some solution from metalink, but that does not working.
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=743720.1
according to note we need to create index but its giveing below metion error.
SQL> @jtfiaibu.sql jtf jtf apps
Connected.
DECLARE
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10758: index owner does not have the privilege to use file or URL datastore
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
ORA-06512: at "SYS.DBMS_SQL", line 1199
ORA-06512: at line 37
Thanks in advance,
Sandeep.

Hi,
DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operationPlease make sure you have no invalid objects. And also please see of these helps. I know these are for older version, but please check
Script jtfictx.sh Failed While Attempting To Run The Autoconfig On APPS Tier [ID 1271186.1]
Autoconfig Returns ORA-29868 from jtfictx.sh [ID 386740.1]
By the way did u iinstall companion/examples CD after installing OracleSoftware
Thanks,
Taher

Performance issues after upgrading to 11g

hello,
We are facing a performance issue after upgrading from 10g to 11g.
as you can see, the tables named APPLSYS.FND_ENV_CONTEXT has grown to 15544880 records,
and oracle is using TABLE ACCESS FULL on it:
DELETE FND_ENV_CONTEXT E
WHERE NOT EXISTS
(SELECT 'X'
FROM FND_CONCURRENT_PROCESSES P
WHERE P.CONCURRENT_PROCESS_ID = E.CONCURRENT_PROCESS_ID)
AND ROWNUM < 10000;
Plan:
DELETE STATEMENT ALL_ROWSCost: 74,345
     5 DELETE APPLSYS.FND_ENV_CONTEXT
          4 COUNT STOPKEY
               3 HASH JOIN RIGHT ANTI Cost: 74,345 Bytes: 3,108,980 Cardinality: 155,449
                    1 INDEX FULL SCAN INDEX (UNIQUE) APPLSYS.FND_CONCURRENT_PROCESSES_U1 Cost: 166 Bytes: 315,450 Cardinality: 63,090
                    2 TABLE ACCESS FULL TABLE APPLSYS.FND_ENV_CONTEXT Cost: 69,124 Bytes: 233,173,200 Cardinality: 15,544,880
select num_rows,last_analyzed from dba_tables where table_name='FND_ENV_CONTEXT'
15544880 07/07/2011 12:08:55
please advice.
Ofer

Please see these docs.
Table Fnd_env_context Growing Very Fast [ID 419990.1]
FND Related Tablespaces Growing at Rapid and Excessive Rate [ID 189800.1]
FNDCPPUR Request Does Not Always Delete Files From The File System, Many Files Will Be Denoted As "deletion failed" [ID 1335304.1]
Concurrent Processing - Best Practices for Performance for Concurrent Managers in E-Business Suite [ID 1057802.1]
Concurrent Processing - Purge Concurrent Request and/or Manager Data Program (FNDCPPUR) [ID 104282.1]
Thanks,
Hussein

Another issue after upgrade to 9.0.2a beta

another issue after upgrade from 8.1.7 to 9.0.2a beta.
When I use "update-request", I need to specify a stylesheet. In that stylesheet, the following lines work before upgrade:
<row>
<fieldname1><![CDATA[<html><head></head><body>]]><xsl:value-of select="request/parameters/fieldname1/."/><![CDATA[</body></html>]]>
</fieldname1>
</row>
After upgrade, it doesn't work properly. What I see in the database field value is storing only
<html><head></head><body></body></html>
instead of storing
<html><head></head><body>fieldname1_value</body></html>
How can I get my result back?
Thanks in advance.

Thanks Steve,
I've upgraded to 9.0.2.0B but find the following error:
Oracle XSQL Servlet Page Processor 9.0.2.0.0B (Beta)
XSQL-017: Unexpected Error Occurred
java.lang.NoClassDefFoundError: oracle/jdbc2/Clob
at oracle.xml.xsql.actions.XSQLUpdateRequestHandler.handleAction(XSQLUpdateRequestHandler.java:103)
at oracle.xml.xsql.XSQLDocHandler.getDocument(XSQLDocHandler.java:134)
at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:139)
at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:61)
at oracle.xml.xsql.XSQLServlet.doPost(XSQLServlet.java:82)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:115)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:83)
at com.caucho.server.http.Invocation.service(Invocation.java:237)
at com.caucho.server.http.RunnerRequest.handleRequest(RunnerRequest.java:323)
at com.caucho.server.http.RunnerRequest.handleConnection(RunnerRequest.java:263)
at com.caucho.server.TcpConnection.run(TcpConnection.java:136)
at java.lang.Thread.run(Thread.java:484)
Does it relates to the changes of usage of the "update-request" syntax?
Thanks in advance
Felix

Stability issues after upgrade from 5 to 6.1?

Dear all,
my client plans to upgrade from WLS 5 to 6.1 soon. The application is
an intranet portal with Epicentric and Vignette used as additional
products.
However, some voices say that 6.1 has stability issues. Well, these
statements are rumours and lack any proof or even anecdotal evidence I
have heard of, and therefore it is very difficult to respond
appropriately.
Having said this, my questions are:
- Did any of you have stability issues after upgrading from 5 to 6.1
on Solaris?
- If yes, what were they and how did you solve them (e.g. upgrade to
SP 5)?
- In 1-2 sentences, what is the context of the application?
My goal is to present a evidence that the romoured stability issues
don't exist or/and a list of meastures to avoid/solve them, if any.
Many thanks in advance
Andreas

"Andreas Raab" <[email protected]> wrote in message news:[email protected]..
my client plans to upgrade from WLS 5 to 6.1 soon. The application is
an intranet portal with Epicentric and Vignette used as additional
products.
However, some voices say that 6.1 has stability issues. Well, these
statements are rumours and lack any proof or even anecdotal evidence I
have heard of, and therefore it is very difficult to respond
appropriately.
Having said this, my questions are:
- Did any of you have stability issues after upgrading from 5 to 6.1
on Solaris?
- If yes, what were they and how did you solve them (e.g. upgrade to
SP 5)?
- In 1-2 sentences, what is the context of the application?
My goal is to present a evidence that the romoured stability issues
don't exist or/and a list of meastures to avoid/solve them, if any.Hi Andreas,
Normally proving that rumors are true is a responcibility of
rumors suppliers. Reverse does sound to me like a joke.
Regards,
Slava Imeshev
P.S. Current weblogic 6.1 is a stable product.

After upgrading my Macbook Air to OS Yosemite it doesn't recognise the 3G USB modem which was working previously. Any ideas

After upgrading my Macbook Air to OS Yosemite it doesn't recognise the 3G USB modem which was working previously. Any ideas?

Hi ..
Reset the PRAM > About NVRAM and PRAM
Those instructions are for Mavericks but will work on Yosemite as well.
Then try the USB modem.

No Audio Output after Upgrading to windows 7; Soundblaster Card is installed

After upgrading to Windows 7 Ultimate (64-bit), I found that my speakers (which are built into my HP w2207 monitor) are not recognized. In the notification area I have the speaker with a red x in it, and it says “No Audio Output Device is installed”.
I have a HP Pavilion D4890Y with the Sound Blaster Audigy X-FI 24-Bit Xtreme sound card. I tried looking in Device Manager, and found “Multimedia Audio Controller” under Other, which states no drivers could be found.
I tried following some of the advice online, and downloaded the latest Realtek High Definition Audio drivers, but and the download seems to run successfully, but I don’t notice any differences. When I reboot as prompted, I’ve still got the same error.
I then tried forcing the Audio Device to use a Realtek driver, but Windows protests (saying it’s not sure it’s compatable with my device, and I end up with “Realtek High Definition Audio” under “Sound, video and game controllers”, but it has a yellow exclamation point. If I click properties, the device status says “This device cannot start (Code 10).” If I try to update the driver I get the message that it cannot find the driver software.   If I uninstall the driver I’m back to the original problem (multimedia audio controller under original devices, with no known drivers).
I also tried downloading various files from the Creative site, but it’s not clear which one to use, and the 4 or 5 different ones I tried (including their recommended beta version for Windows 7), when each of them opens it says it can’t find any supported devices.
Suggestions? Thanks!
This question was solved.
View Solution.

Hi,
"If the driver is a previous revision install it using the TROUBLESHOOT COMPATIBILITY tool that is part of the Windows 7 OS.
To use the tool, uninstall any drivers for the sound card you show listed in Control Panel/Programs/Uninstall Programs  list.  Delete the Device from Device Manager.
Download the revision of the driver from www.creative.com  website to a folder you've created and placed on your desktop.
After the driver is downloaded, navigate to the "setup.exe" of the driver and Right Click - select Troubleshoot Compatibility  ----
Let the compatibility tool select a possible solution then use its suggestion of TRY RECOMMENDED WINDOWS SETTINGS, if it does not find a solution it will submit only CUSTOMIZE SETTINGS and let you install it as you designate."
The preceding information comes from a Microsoft Windows 7 forum regarding an issue similar to yours.
the information you provided did verify that it is a sound blaster XiFi Extreme card as checked against the Vendor / Device list.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Audio issues after upgrading to OS X 10.10 (Yosemite)

Similar Messages

Maybe you are looking for