Audio looping need some help
I was able to loop audio in the main menu but could not do it again. I want to audio loop music that is 8 sec long on my dvd main menu. I dragged the audio to the menu and waited for the set audio to come out. I can hear the music when I simulate the menu. However, it does not loop smoothly. I checked the setting in the general tab and it is on loop. Also in the general tab I saw that the video is 30sec long. Can someone please help me on this? How can I do a seamless loop? Thanks.
g5 Mac OS X (10.4.8)
Seamless - meaning no gaps - will not happen, you can fadein/fadeout audio but there is a pause at the end of the loop
If the video is 30 seconds long, the audio will not cover the whole 30 seconds, you will need to adjust the music or menu. In the inspector you can set the menu to an 8 second length (really kind of short) and have it loop from the beginning (loop point at 0) - your best bet is to make the audio longer
Similar Messages
-
I need some help for an explanation. Loop for 1 minute.
int minute=1;
long currentTime=System.currentTimeMillis();
long stoppingTime = currentTime + (minute * 60 * 1000);
while (currentTime<stoppingTime) {
// do x;
currentTime=System.currentTimeMillis();
}I want to have the loop to run for 1 minute. It does not seem to work.
What did I miss? I need some help for an explanation.Ran:
class PrintTimeAsProcess {
public static void main(String[] argv) throws Exception {
int minute=1;
long currentTime=System.currentTimeMillis();
long stoppingTime = currentTime + (minute * 15 * 1000);
System.out.println("START Time: "+currentTime);
while (currentTime<stoppingTime) {
currentTime=System.currentTimeMillis();
System.out.println("END Time: "+currentTime);
}Got:
START Time: 1149278202718
END Time: 1149278217718
1149278217718
-1149278202718
15000 -
Need some help...in need of a different way.
Hi, I'm new to Java and need some help. I have 2 questions that are similar in nature.
1st Question:
In a program that I'm writting I have a do-while loop which at the end brings up a dialog box that asks the user to enter '1' for 'Yes' or '2' for 'No' to continue.
I would rather have the option of having the user enter 'y' or 'Y' for Yes and 'n' or 'N' for No.
Here is what I have currently:
int x;
String data;
do{
//Blah blah code
data = JOptionPane.showInputDialog(null, "Enter 1 for Yes or 2 for No");
x = Integer.parseInt(data);
}while(x == 1);
x++;
2nd Question:
In another part of my program I have a Case statement that asks the user to enter a number or a letter from a list of choices. They can enter '2' , 't', or 'T'.
I would rather have all of this in an if-else chain. Is this possibe? if so, how would I do it.
Thanks.I would rather have the option of having the user enter 'y' or 'Y' for Yes and 'n' or
'N' for No. You can test the first letter of whatever the user inputs like this:String response = JOptionPane.showInputDialog(null, "Enter (Y)es or (N)o");
response = response.toLowerCase();
if(response.startsWith("y")) {
// the user entered something starting with y
} else if(response.startsWith("n")) {
// the user entered something starting with n
} else {
// what are you going to do?
}JOptionPane also has versions that would allow yes/no buttons. Eg, see:
http://java.sun.com/docs/books/tutorial/uiswing/components/dialog.html -
Please I need some help with a table
Hi All
I need some help with a table.
My table needs to hold prices that the user can update.
Also has a total of the column.
my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
I have tried using but as I need to set the toal with something like total
totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
Can any one please advise on some way I can get this to work ?
Thanks for reading
CraigHi there camickr
thanks for the help the other day
this is my full code....
package printing;
import java.awt.*;
import java.awt.event.*;
import java.awt.print.*;
import javax.swing.*;
import javax.swing.table.*;
import java.text.DecimalFormat;
public class tablePanel
extends JDialog implements Printable {
BorderLayout borderLayout1 = new BorderLayout();
private boolean printing = false;
private Dialog1 dialog;
JPanel jPanel = new JPanel();
JTable table;
JScrollPane scrollPane1 = new JScrollPane();
DefaultTableModel model;
private String[] columnNames = {
private Object[][] data;
private String selectTotal;
private double total;
public tablePanel(Dialog1 dp) {
dp = dialog;
try {
jbInit();
catch (Exception exception) {
exception.printStackTrace();
public tablePanel() {
try {
jbInit();
catch (Exception exception) {
exception.printStackTrace();
private void jbInit() throws Exception {
jPanel.setLayout(borderLayout1);
scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
this.add(jPanel);
jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
scrollPane1.getViewport().add(table);
jPanel.setOpaque(true);
newTable();
addToModel();
addRows();
setTotal();
public static void main(String[] args) {
tablePanel tablePanel = new tablePanel();
tablePanel.pack();
tablePanel.setVisible(true);
public void setTotal() {
total = 0;
int i = table.getRowCount();
for (i = 0; i < table.getRowCount(); i++) {
String name = (String) table.getValueAt(i, 1);
if (!"".equals(name)) {
if (i != table.getRowCount() - 1) {
double dt = Double.parseDouble(name);
total = total + dt;
String str = Double.toString(total);
table.setValueAt(str, table.getRowCount() - 1, 1);
super.repaint();
public void newTable() {
model = new DefaultTableModel(data, columnNames) {
table = new JTable() {
public Component prepareRenderer(TableCellRenderer renderer,
int row, int col) {
Component c = super.prepareRenderer(renderer, row, col);
if (printing) {
c.setBackground(getBackground());
else {
if (row % 2 == 1 && !isCellSelected(row, col)) {
c.setBackground(getBackground());
else {
c.setBackground(new Color(227, 239, 250));
if (isCellSelected(row, col)) {
c.setBackground(new Color(190, 220, 250));
return c;
table.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
if (e.getClickCount() == 2) {
if (e.getClickCount() == 1) {
if (table.getSelectedColumn() == 1) {
table.setTableHeader(null);
table.setModel(model);
scrollPane1.getViewport().add(table);
table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
public void addToModel() {
Object[] data = {
"Price", "5800"};
model.addRow(data);
public void addRows() {
int rows = 20;
for (int i = 0; i < rows; i++) {
Object[] data = {
model.addRow(data);
public void printOut() {
PrinterJob pj = PrinterJob.getPrinterJob();
pj.setPrintable(tablePanel.this);
pj.printDialog();
try {
pj.print();
catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
Graphics2D g2 = (Graphics2D) g;
g2.setColor(Color.black);
int fontHeight = g2.getFontMetrics().getHeight();
int fontDesent = g2.getFontMetrics().getDescent();
//leave room for page number
double pageHeight = pageFormat.getImageableHeight() - fontHeight;
double pageWidth = pageFormat.getImageableWidth();
double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
double scale = 1;
if (tableWidth >= pageWidth) {
scale = pageWidth / tableWidth;
double headerHeightOnPage = 16.0;
//double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
//System.out.println("this is the hedder heigth " + headerHeightOnPage);
double tableWidthOnPage = tableWidth * scale;
double oneRowHeight = (table.getRowHeight() + table.getRowMargin()) * scale;
int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
double pageHeightForTable = oneRowHeight *numRowsOnAPage;
int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
if (pageIndex >= totalNumPages) {
return NO_SUCH_PAGE;
g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
//bottom center
g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages), (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
g2.translate(0f, headerHeightOnPage);
g2.translate(0f, -pageIndex * pageHeightForTable);
//If this piece of the table is smaller
//than the size available,
//clip to the appropriate bounds.
if (pageIndex + 1 == totalNumPages) {
int lastRowPrinted =
numRowsOnAPage * pageIndex;
int numRowsLeft =
table.getRowCount()
- lastRowPrinted;
g2.setClip(0,
(int) (pageHeightForTable * pageIndex),
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(oneRowHeight *
numRowsLeft));
//else clip to the entire area available.
else {
g2.setClip(0,
(int) (pageHeightForTable * pageIndex),
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(pageHeightForTable));
g2.scale(scale, scale);
printing = true;
try {
table.paint(g2);
finally {
printing = false;
//tableView.paint(g2);
g2.scale(1 / scale, 1 / scale);
g2.translate(0f, pageIndex * pageHeightForTable);
g2.translate(0f, -headerHeightOnPage);
g2.setClip(0, 0,
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(headerHeightOnPage));
g2.scale(scale, scale);
//table.getTableHeader().paint(g2);
//paint header at top
return Printable.PAGE_EXISTS;
class TableRenderDollar extends DefaultTableCellRenderer{
public Component getTableCellRendererComponent(
JTable table,
Object value,
boolean isSelected,
boolean isFocused,
int row, int column) {
setHorizontalAlignment(SwingConstants.RIGHT);
Component component = super.getTableCellRendererComponent(
table,
value,
isSelected,
isFocused,
row,
column);
if( value == null || value .equals("")){
( (JLabel) component).setText("");
}else{
double number = 0.0;
number = new Double(value.toString()).doubleValue();
DecimalFormat df = new DecimalFormat(",##0.00");
( (JLabel) component).setText(df.format(number));
return component;
} -
Need some help with a remove function
Design and code a program that will maintain a list of product names. Use a String type to represent the product name and an array of strings to implement the list. Your program must implement the following methods:
Add a product to the list
Remove a product from the list
Display then entire list
Find out if a particular product is on the list.
You need to create a command command loop with a menu() function. The program must continue asking for input until the user stops.
This is the assignment and this is what I have so far. I need some help writing the remove function.
Thanks
* Title: SimpleSearchableList.java
* Description: this example will show a reasonably efficient and
* simple algorithm for rearranging the value in an array
* in ascending order.
public class SimpleSearchableList {
private static String[] List = new String[25]; //These variables (field variables)
private static int Size; //are common to the entire class, but unavailable
//except to the methods of the class...
public static void main(String[] args)
String Cmd;
for(;;) {
Menu();
System.out.print("Command: ");
Cmd = SimpleIO.inputString();
if(Cmd.equals("Quit"))
break;
else if(Cmd.equals("Fill"))
FillList();
else if(Cmd.equals("Search"))
SearchList();
else if(Cmd.equals("Show"))
ShowList();
else if(Cmd.equals("Remove"))
Remove();
//Tells you what you can do...
public static void Menu()
System.out.println("Choices..................................");
System.out.println("\tFill to Enter Product");
System.out.println("\tShow to Show Products");
System.out.println("\tSearch to Search for Product");
System.out.println("\tRemove a Product");
System.out.println("\tQuit");
System.out.println(".........................................");
//This method will allow the user to fill an array with values...
public static void FillList()
int Count;
System.out.println("Type Stop to Stop");
for(Count = 0 ; Count < List.length ; Count++)
System.out.print("Enter Product: ");
List[Count] = SimpleIO.inputString();
if(List[Count].equals("Stop"))
break;
Size = Count;
//This method will rearrange the values in the array so that
// go from smallest to largest (ascending) order...
public static void SearchList()
String KeyValue;
boolean NotFoundFlag;
int Z;
System.out.println("Enter Product Names Below, Stop To Quit");
while(true)
System.out.print("Enter: ");
KeyValue = SimpleIO.inputString();
if(KeyValue.equals("Stop")) //Note the use of a method for testing
break; // for equality...
NotFoundFlag = true; //We'll assume the negative
for(Z = 0 ; Z < Size ; Z++)
if(List[Z].equals(KeyValue)) {
NotFoundFlag = false; //If we fine the name, we'll reset the flag
System.out.println(List[Z] + " was found");
if(NotFoundFlag)
System.out.println(KeyValue + " was not found");
//This method will display the contents of the array...
public static void ShowList()
int Z;
for(Z = 0 ; Z < Size ; Z++)
System.out.println("Product " + (Z+1) + " = " + List[Z]);
public static void Remove()
}I need help removing a product from the arrayYes. So what's your problem?
"Doctor, I need help."
"What's wrong?"
"I need help!"
Great.
By the way, you can't remove anything from an array. You'll have to copy the remaining stuff into a new one, or maybe maintain a list of "empty" slots. Or null the slots and handle that. The first way will be the easiest though. -
Need to try to find Pi, need some help
I have need to try to find some of the values of Pi,
but when i try math.PI i only get down to like 8 decimals.
I need some help.
Not sure were to start either!
Message was edited by:
AtenYou're just adding terms together. There's a series of them, so you need a loop. Each pass through the loop could add one more term. Note that each term has a denominator that is bigger by 2, and it's either added or subtracted (or to look at it another way, you're adding negatives alternately).
The main issue is how accurate you want it to be. You can't add the digits together forever. So you have to choose a stopping point. You can stop based on a time period (when you've run out of time, stop adding new terms) or on precision (when two subsequent values are close enough to each other, stop).
You'll probably want to use java.math.BigDecimal.
If you give some more details about the assignment I can make some more suggestions.
Why don't you give it a try and see how it works? -
Need some help with strange sounds in Logic Pro 8
Hi!
I need some help with a problem I have in Logic Pro 8.
When I have arrange window open, suddley strange high tones starts to make noise in my headphones. I don't know where these sounds comes from or why, but I need some help to get them away. Should I just try to contact Apple?
MartinHi Martin
Welcome to the forum. Give everyone here some more info about your set up otherwise it may be difficult to figure out what is wrong.
Which mac?
Which OS?
any hardware devices?
if you are listening through headphones using the built in audio from the mac, you may be hearing fan noise or a hard drive spin noise.
Don -
Need some help with sound quality
Hi guys, new here. I'm working on creating an album on my own. Bass and vocals are real, everything else is using software instruments. I have about 8 songs done, but the problem is I don't really know what I'm doing as far as recording and levels go.
I'm using studio headphones and everything sounds fantastic through them, and even pretty good if I just hook up some earbuds, but when I bounce out a track and burn them to do a disc and play it in my car, it sounds awful. Suddenly the guitar is too low, drums are too loud.
I really need some help here. I'm even willing to pay someone to get me on the right track. Using paypal or whatever.AecDuck wrote:
Where's the fun in that? Maybe you have different motives, but I got into home recording because I like doing things myself, even if I have to learn the hard way. If you know enough to get good bass and vocal recordings and mix that with virtual instruments, then you are well on your way to making a decent sounding mix. Mixing in headphones can be very deceiving. Things simply sound different in headphones. You need some monitors, even if they are crappy because if you can get it to sound good in crappy monitors it will likely sound good on other speakers.
The fun and experience comes from getting a good balance that sounds good in headphones, and in the monitors, and in your home stereo, and in your car stereo. Use the different audio systems as a reference. If the drums are too quiet in the car, bring them up a bit. If the bass is too loud in your headphones, put them down a bit.
If you bring in your recordings to be mixed by somebody else, first of all you're going to end up paying hundreds, if not $1000+ dollars, even in a sub-par studio. Secondly, it's never going to sound how you want it to sound. It's going to sound how THEY want it to sound.
I know it takes longer, and it's hard work, but you will have such a tremendous amount of satisfaction when your project is done knowing that YOU recording it, and YOU mixed it on YOUR equipment. It will be 100% yours.
Where's the fun? How about the fun in interacting with another human being? How about the satisfaction in having another validate what you've been trying to produce?
I don't think it's helpful to make generalizations about what type of experience the OP might have in getting professional help. I have had good experiences working with mixing engineers, and perhaps I have just been lucky, but I've been able to produce music that sounded how I wanted it to sound, but at a level beyond which my skill at the time would have been able to produce, AND I gained some insights to help me in the future.
It IS satisfying to teach yourself a new skill. And it takes a lot of patience, trial and error, and you might miss the mark more often than you hit it. If you're in a rush, it might be a viable solution to contact some studios and see if you can work with them. Learning from others is perfectly acceptable. -
Need some help with GUI development
Hi ppl.. I am new to labview and I am currently involved in a testing equipment development. I need some help. firstly I need to know if multi-screen GUI (with icons and stuff)is possible in Labview. Secondly I need to interface the measurements to a database. Would it be possible to create just small executable to perform the measurement part alone and do the rest of database operation using VB. (or would it be advisable to do the whole lot in labview)
the final sft should look something like this
screen1 :setup screen... interface with database
screen2 :actual test and test results
screen3 :log file creation
measurement is via daq board and i also need to send some control signals and set up TCP/IP for data transfer.Hello.
I am not completely sure what you mean by "multi-screen", but I am pretty sure that doing the user interface using a tab control will work for you. I have attached an example VI which is a state machine (which in LabVIEW you do with a case structure inside a while loop). Notice how the configuration controls are in the first page of the tab control, associated with state 0 of the state machine, but in the block diagram, they are actually used in state 1 of the state machine. Instead of writing a very long description, I will let you take a look at the code (which I saved in LV 7.0 version). Let me know if you have questions or comments
Attachments:
MultiScreenStateMachineExample.vi 50 KB -
Need some help with wine + midi
Howdi guys!
I need some help. I'd like to run an application which is only available for Windows and OSX, so my choice is wine. This application needs to send midi signals to the hardware it is supposed to control.
In the product's forum there is a thread which shows how it can be done. But the newest releases of wine don't allow this, because it doesn't support jack anymore.
I think basically it doesn't matter which application it is I run in wine, the question is, is it possible to send midi signals in and out through wine? If so, how? Might be that it's quite trivial, in my defense I have to say that I never worked with midi before.
The soundcard I use is an Edirol UA-25 which is fully supported in Linux, midi works.
Thanks for any ideas!
edit: Forgot two things: I know I could try older versions of wine or running it in a virtual machine, but I want to avoid this.
Last edited by Army (2012-04-27 07:15:33)For that app, you will probably be using the ALSA-midi interface. So, you shouldn't require Wine to have jack support. - In fact, that picture clearly shows that Wine is using ALSA-midi, but he is using jackd + a2jmidid (which exposes alsa-midi 2 jack-midi).
As long as that software doesn't require a special driver, you should be able to use it. As for the specifics, i would imagine that you would start jackd, start a2jmidid and then start your application. - you also have to make sure your midi device is connecting before launching your app in wine - otherwise the device won't show up in your wine app. You also will need to select your midi interface in your application. After this, you should be able to connect your wine app (through the a2jmidi bridge) to your hardware.
But if for whatever reason you can't get it too work ~ i do actually use a VM for updating firmware on 2 different audio devices (a soundcard and midi-controller) - and it works great. I am using VMware, but i would imagine virtualbox would work very similar..
cheerz -
hi all
i am writing a simple program and got stuck at one point
this is how it goes:
public static static main(String[] a) {
for (int i=1; i<a.length; i++){
System.out.print(a[i]+",");
so if i entered "a ab abc" this becomes "a,ab,abc,"
the problem is that i NEED to use substring to get rid of the last comma, how can i take the already print out result as a whole new string?? or i need to rewrite it in another way??
i really need some help, thanks in advance
BYou start from index 1, skipping the first element in the a-array, is that what you want? Otherwise you should loop from 0.
Anyway, here is how you can do it (skipping first element as you did):
for (int x = 1; x < a.length; x++) {
System.out.print(a[x]);
if (x < a.length-1)
System.out.print(",");
}You can't remove what you have already printed out. Another way to do this, is with a StringBuffer:
StringBuffer sb = new StringBuffer();
for (int x = 1; x < a.length; x++) {
sb.append(a[x]);
if (x < a.length-1)
sb.append(",");
String s = sb.toString();
System.out.println(s); -
Complete Java n00b...need some help
I'm very new to Java and I need some help writing a basic program.
I need to write a program that lets the user add up an infinite amount of floating point numbers. The program should compute the sum of all the numbers entered thus far. So for example if the user enters 2 and 3, it should give a number of 5. If the user then enters 4, I should give me 9 etc.
I'm not really sure how to get started on writing that. I can add up two numbers but I don't know how to tell the program to keep adding additional numbers to that sum. Can someone please help me out? thanksIt's ok... it can be hard to understand even the simplest concepts with only text and no help.
There needs to be an int variable outside (before) the loop initialized to 0.
float num = 0;Next, you need to have an infinite loop that requests floats to add onto the number.
Scanner input = new Scanner(System.in);
while (true) {
float toAdd = input.nextFloat();
num += toAdd;
System.out.println("Current sum " + num);
}Putting all this together and putting it into a main method will work, but we have a bit of an issue. The program won't stop! For that reason, we need to specify a number which can exit the program. I like to use 0 for this purpose.
Scanner input = new Scanner(System.in);
while (true) {
float toAdd = input.nextFloat();
if (toAdd == 0) { //test if toAdd is 0 so the program can break;
break;
num += toAdd;
System.out.println("Current sum " + num);
}So, this code will work:
import java.util.Scanner;
class AddNumbers {
public static void main(String[] args) {
float num = 0;
Scanner input = new Scanner(System.in);
while (true) {
float toAdd = input.nextFloat();
if (toAdd == 0) { //test if toAdd is 0 so the program can break;
break;
num += toAdd;
System.out.println("Current sum: " + num);
}Edited by: Arricherekk on May 18, 2008 3:19 PM -
Error 1603: Need some help with this one
When installing iTunes I first get an error box saying
"Error 1406: Could not write value to key \Software\classes\.cdda\OpenWithList\iTunes.exe. Verify that you have sufficient access to that key, or contact your support personnel."
The second one (after I click on Ignore on the last box) I get it this one:
"Error: -1603 Fatal error during installation.
Consult Windows Installer Help (Msi.chm) or MSDN for more information"
Strange thing is that I do have full access to my computer (or atleast in all other cases I have had since I am the only one with an account on it).
I have done my best in trying to solve it myself but I'm running out of ideas. I have downloaded latest versions from the website and tried installing Quicktime separately. I have also tried removing Quicktime using add/or remove programs though I just I didn't dare to take full removal because it said something about system files.
Anyway I really need some help with this, anyone got any ideas?
Greets,
Sixten
Windows XP ProDo you know how to count backwards? Do you know how to construct a loop? Do you know what an autodecrementor is? Do you know how to use String length? Do you know Java arrays start with index 0 and run to length-1? Do you know you use length on arrays too? Do you know what System.out.println does?
Show us what you have, there isn't anything here that isn't easily done the same as it would be on paper. -
When am watching live news on air play it only shows for one minute 30 seconds ,, I need some help?
First of all, Hunt--thanks for responding!
"First, where are you playing the MPEG-2, that you see that jitter?"
On both a MacBook Pro, an Acer laptop and my Mac Tower. I would love to think that it is a problem with the playback system, and that if I merely send the file off to the duplicator they won't have the same problem. Maybe that is the case...I don't know if I have a choice rather than sending it off to see. But it happens in the same spots, in the same way, on all three of the players so I'm a little reluctant to have faith.
"Another thing that can cause jitter in an MPEG-2 is the Bit-Rate - higher the Bit-Rate, the better the quality, but the larger the file. For a DVD, one is limited by the total Bit-Rate (both Audio & Video), but with longer prodcutions, some users choose too low a Bit-Rate. If this is the issue, one would need to go back to the original Project and do a new Export/Share."
Of course, but in the case there is no more 'original project.' It is gone like the wind, stolen along with his computer and backups.
I think I am stuck using one of two files as my master: a DVD he burned where I only see the stutter/vibration/jitter once, or the mpeg2 file where I see it three times. Hopefully, the duplication house can rip if off of one of them and not see the jitter. I know that in audio, my personal filed, you can do a lot to enhance already existing sound--EQ, compression, tape saturation emulation software, etc. I guess I'm hoping there is some kind of analog to the video world that address jitter after a source has been printed--if indeed the source has been printed to be jittery.
Thanks,
Doug -
Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.
Maybe you are looking for
-
Updating Apps bought with two apple accounts
Half the apps on my iphone are bought from an old hotmail account, and the other half are from a newer mobile me account... When I want to update all the apps, I have to sign in to both accounts (in iTunes) or it doesn't think I bought the apps! Is t
-
How do you print multiple photos per page in LANDSCAPE using iPhoto ?
I am very experienced using iPhoto and like it but it has a very limited print program that I find frustrating. The simple task of turning the paper to landscape mode does not appear to be one of the options when you wish to print more than one photo
-
The New Flash Player Is Downloading Flash 9.0
I have downloaded Flash Player 10.1 & the link is downloading 9.0. Why hasn't anyone fixed this problem in the link?
-
Installing printer Envy 4500 on MAC OS X.10- set up bar stuck on "retrieving information"- Help!!!
I bought the HP Envy 4500 because I just upgraded my Mac to OS 10.10 and my office jet would not come along for the ride... I installed the driver from the HP website and I completed all the steps until the last step "configuation results". The wind
-
Can't find Torrents downloader after shutting down my macro
Please help me if im just missing something but this already happened twice. I installed torrent downloader, downloaded a movie then turned off my macpro so I can continue the download the next day. However, everytime I start my macpro, I can't find