Audio on dv2700 after downgrade to XP

Dears,
I downgraded to windows XP due to project application. now i need drivers and specialy audio drivers. any help on that please.

Hi:
Please read the XP downgrade guide at the link below:
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
Your model's downgrade guidance can be found under "Difficult Models."  There is a section on what steps need to be taken to install the audio drivers. Pay particular attention to installing the correct version of the MS UAA driver before installing the audio driver.
Paul

Similar Messages

  • Audio-interface unavailable after system update

    I use a Behringer FCA202 firewire audio-interface.
    After updating to 10.4.10 it is unavailable.
    Profiler tells me it is there, but I can not see it in either application nor in the sound-settings.
    Any help appreciated...

    If you run /Utilities/Audio MIDI Setup does it appear there ?
    Try unplugging all devices then reset Parameter RAM (hold apple/option/p/r keys at boot and don't let go until the third chime) then re-connect the Firewire cable.

  • Getting SMS back after downgrading?

    Hi
    I upgraded my Iphone 3G (not jailbroken) to IOS4. I did not back up the phone before upgrading. The upgrade itself went well and Itunes did a backup of the phone AFTER the upgrade.
    Turned out that my phone didn't work to well with the IOS4. It was generally slow and froze and returned to the Home screen after a while whatever I did. So, I wanted to go back to the old OS 3.1.3. After surfing the net I found out how. I managed to downgrade the phone.
    Here's the problem. The backup which contains all my data, SMS etc. is made for IOS4 and cannot be used for 3.1.3. I have the backup folder containing everything but it's for the new OS.
    Is there any way to work around this? I have tried to copy the SMS-file from the IOS4 backup folder to the 3.1.3 backup folder (that I created after downgrading), but it seems that the strings (or whatever they're called) are different so it does not work.
    Is there a program that can extract my SMS'es while the phone is upgraded to IOS4 and put them back into the phone after it's been downgraded to 3.1.3?
    Message was edited by: Angry with apple

    You can download all the files that are originally on the recovery partition of  MBP that came with Lion pre-installed from the Apple website. Sorry I don't have a link but a google search will turn it up. With that download you can make a bootable USB stick that will get you to the screen where you download and install Lion from the Apple website.
    Or you can buy Lion on a USB stick from the Apple Store.

  • How can I add the audio content cd after logic finished installing ?

    There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
    If you can help me please be very specific as to how to do it so that I can follow the directions properly.
    Please help me.
    Thanks

    Hi
    You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
    CCT

  • How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

    How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
    What am I doing wrong?

    After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
    What am I doing wrong?
    How exactly are you doing this?
    When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file.  Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
    You should see this prompt, when you are joining the regions:

  • Iphone stuck in emergency mode after downgrade from 4.0.2 to 4.0?

    iphone stuck in emergency mode after downgrade from 4.0.2 to 4.0?
    Upgraded to 4.0.2 last night. Immediately, itunes would no longer detect my iphone. Decided I had to downgrade back to 4.0 again. Learned I cannot do that easily, so i found a .ipsw file of firmware 4.0 online, and downloaded it. Started up my iphone attached to itunes in restore mode, held down shift, and clicked restore button. Successfully restored the 4.0 file I had downloaded.
    At the first boot, it was stuck in emergency mode. I even tried to restore the default itunes backup after that, it was still stuck in emergency mode.
    Anyone know how i fix this iphone? I have no interest in jailbreaks, i am in a 2 year contract with AT&T.

    omg, it just fixed itself! i installed a brand new itunes on my laptop (which has never had itunes app before)
    plugged in my iphone, it detected it right away and said "activated"! my phone is working again and has its phone number back.
    now i did notice that the 4.0 is indeed slow, so i do want to try going back to 3.1.3 also.

  • My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram

    My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram.  Can be any song, any time, same song will play if I select it again.  Bit of a bummer itunes is the main thing I use (macbook pro jukebox).

    Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
    Best of luck
    Terry

  • Severe audio problems in After Effects CS4 and MXF and more...

    Hi!
    I've been experiencing a lot of problems lately with several CS4 products.
    First, and the worst, is that there seems to be some severe audio bug in After Effects when handling mxf-files. I pre-cut a project in premiere CS4, shot with a Sony EX1, and then imported the project in After Effects CS4.
    In premiere everything worked fine and I had all the audio. In AE however the audio matched with the MXF-files disappeared (Yes I had the import audio box checked). All other audio worked fine from the music tracks and so on, but the MXF-files (MXF for NLE) was completely blank, the waveforms were completely flat. I checked every option there is in AE regarding audio and tried enabling and disabling XMP ID's and so on. After a lot of tweaking and testing I understood that the problem was not with any settings anywhere, the MXF-files lacked audio even if I started a new project and just imported the MXF-file.
    The problem seems to be connected to when importing from Premiere. My colleague was editing a similar project on his computer in After Effects without problems, and he started out fresh in AE (didn't pre-cut in premiere). However, we tried to move my project to his computer, to see if the problem was connected with incompability with my hardware or such, and he got the same problem as me when he opened the project. Waveforms on MXF-files were completely flat. Certain confirmation that the problem was not connected with my computer appeared when he later reopened his own project, that had worked fine before, and audio was now completely gone - waveforms flat. An hour later, by chance, his audio suddenly popped back.
    I have experienced this problems in two different projects in different forms (but both pre-cut in premiere). In the first, audio disappeared while previewing but was there when I ctrl-scrolled and rendered (no I hadn't muted audio in the preview panel). In the second, audio was completely gone even when rendered.
    In both cases I tried saving and restarting the computer, reimporting from premiere, starting a fresh after effects project and only importing the mxf-files, changing the project settings, fps fixed to the correct instead of auto, changing output audio mapping, changing XMP, and so on in every possible way and combination I could imagine.
    At my company our suspicion is that After Effects flags mfx-files imported from Premiere in some wierd way, to strengthen and ensure compatibility between the two - regarding different audio tracks, settings and effects from premiere (and this is almost what you could suspect that the XMP ID is for, but as explained with or without doesn't change a thing regarding this). We have no problem with the pure MXF support for AE, as MXF-files work just fine in After Effects if you import them directly and have not imported them through premiere earlier (but after a file has been "flagged" you seem to be sc***ed)
    Anyone else experiencing this? Or am I missing something huge?
    As additional notes, the dynamic link function seems extremely buggy and both premiere both sometimes complains about "dynamic link already in use and only one connection blah blah" even though only one link is used, and even though you restart the projects, programs, computer, whatever.
    In furher addition Adobe Media Encoder (which also seems to be using some sort of dynamic link offspring) is super-buggy and most codec formats either doesn't start to render or just renders partially and then the program hangs. The problem have a connection with a process named pproheadless.exe eating upp all the RAM (4gbs).
    (My workstation has been working smoothly for one and a half years and I have had very little problems with CS3 and "just" AE CS4. I am cautious of updates, don't have spyware and use Quicktime 7.5 as 7.5.5 is superbuggy and people seems to have problems with 7.6 and it doesn't fix the gamma issues anyway.)
    Sorry if this was a long post but the problem is compl

    Dude, that's what these forums are all about. Everyone in here says they dont work for Adobe, but they all act like apologists for what is clearly a disaster of a software release.  My complaints aren't as specialized as yours, just very basic, and I wont go into all of them, because the list is long, and includes nearly every program in CS4.
    I'm going for a refund, either from the retailer or my credit card company. Releasing software like this is dishonest.

  • Audio recording stops after a few seconds on iPad 1. Any suggestions?, Audio recording stops after a few seconds on iPad 1. Any suggestions?

    On an IPad 1 even after a full restart, and only application running, I'm finding that Audio recoding stops after a few seconds. The duration seems to be fairly random between 5 seconds to 25 seconds. Creating other tracks seems OK.
    Any ideas would be appreciated.

    I've seen this issue in the past.  I think it is connected to the operating system itself.  I say this because I reinstalled the os using itunes and then restored a backup.  Then garageband started behaving again.  Then the issue came back - after I did an os update.  So I'd try reverting back to a fresh version of the latest os, and then restoring your apps using a backup.
    Hope it helps
    @zorin

  • Error -42408 after downgrade n iphone content unreadable

    Hi,
    I recently deleted the new itunes 11 from the apps folder, downloaded and installed the old itunes 10.7 in it's place instead. But everytime I start itunes, I get the error -42408 and itunes keep telling me it cannot read the content of my iphone and I have to restore it. This never happened prior to the upgrade to version 11 so I am thinking it's a problem with the downgrade?
    Is there something I am to delete or??
    Thank You.

    What you need to do depends upon how you did the downgrade.
    =Downgrading from iTunes 11 to iTunes 10.7=
    You may be able to go back with Time Machine but this may involve restoring other items too (https://discussions.apple.com/message/20441404).  Alternatively:
    Back up your computer first, in case the unexpected happens.
    Quit iTunes.
    Get iTunes 10.7 from http://support.apple.com/kb/DL1576 or the direct download link at:  http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
    Do a few preparatory steps by making sure all iTunes components are not running and cleaning old files.   See https://discussions.apple.com/message/20475394.  Do steps 3 and 4.  Steps 6-8 may be also useful but I don't know if they are essential.  Some of the other steps are not necessary, duplicate steps listed later in my post or are perhaps even unhelpful in the process.
    Replace the iTunes 11 application with iTunes 10.7.  Simply dragging the application to the trash may not work. Lion (OSX 10.7) and newer systems have iTunes integrated into the operating system and deleting is a bit more involved.  Two ways to do this are:
    1.  Use the shareware Pacifist utility (http://www.charlessoft.com/) to install iTunes 10.7 including all associated system files. Details at http://forums.macrumors.com/showpost.php?p=16400819&postcount=6
    2. Check this reference on how to delete the iTunes application itself:
    Delete iTunes in Mac OS X 10.7 Lion - http://osxdaily.com/2011/09/13/delete-itunes-in-mac-os-x-10-7-lion/
    After deleting the application there may be other files that need downgrading too. See the note about error -42408 at the end of this post. You may want to tuck these away somewhere safe until you have completed the installation of iTunes 10.7.  I have not tested this but ideally if newer versions are not found then the installer will put in the old versions. This may include these files in /System/Library/PrivateFrameworks/ which apparently get updated by iTunes 11:
    AirTrafficHost.framework
    CoreFP.framework
    DeviceLink.framework
    iTunesAccess.framework
    MobileDevice.framework
    After doing one of the two procedures above you will have to rescue the most recent old iTunes library from your iTunes > Previous Libraries folder. Rename it "iTunes Library.itl"  and replace the existing one in the iTunes folder. A newer version of iTunes irreversibly updates your library file so you have to replace it with the old one or you will get an error message. Note, this will revert your library to the version at the time of the upgrade and you will have to update any changes made since.  See:
    https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library from previous iTunes library file after upgrade/crash.
    iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
    Other issues:
    - https://discussions.apple.com/message/20432309 - solution to mobile devices saying they need to be restored after downgrading
    - If you encounter error -42408:
    iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - including specific error codes.
    Alternatively, check https://discussions.apple.com/message/20441424 which requires you have a Time Machine backup (though possibly if you remove the newer version of these files old ones may be installed with the iTunes 10.7 installer - untested).  A  variant of this is at: https://discussions.apple.com/message/20448184
    - Persistent "Show in iTunes Store" arrows after downgrade - https://discussions.apple.com/thread/4567064

  • Audigy 4 - Audio at bootup, after time no audio

    Greetings everyone! My first post, so I hope to find a bit of help here. Anyway, I have a bit of a pickle with my Audigy 4 card, running on Win7.
    After system boot, sound runs fine. After a while though, and this seems completely random, sound is gone. According to the volume mixer, audio is playing (since the green bar goes up and down) but there is no sound to be heared. Rebooting the system solves the problem, at least for a little while, until I am once again struck by the sound of silence.
    Now I have upgraded the drivers, from the official Microsoft Drivers, Creative Drivers 2.6 and Drivers 2.8 (which are the latest) and this issue happens accross the board.
    I have read about the SPIDF thingy, but having deactivated that, just does bugger all.
    Is anyone else experiencing this issue? This is my second Mobo, and the same issue has happened again. Running on WinXP is fine, so it appears that this is not a mobo or a snd card problem.
    Any help would be greatly appriciated.
    Also:
    - Resetting the driver does not solve the issue
    - Reinstalling drivers does not solve the issue
    - System Restart seems to solve it for a little while, but its not a complete solution resetting the system at least once
    ? an hour
    - Deleting drivers and doing a clean install also does not solve the issue
    - Reformatting and doing it on a clean install also does not solve the issue
    HELP ^^

    Re: Audigy 4 - Audio at bootup, after time no audio)I have the same problem with Vista. I've had this problem for YEARS. The audio works fine when the system is booted up. However, after a while (it could be 2 hours or more), the audio tends to get interrupted or scratchy when viewing a web page with a lot of graphics, or when a video is buffering, or maybe when a file is downloading. After a while, the audio will stop altogether, and the computer won't be able to stream audio or video at that point. If I then right click on the speaker icon,? and go into Speaker Properties, and then go into Advanced and click on the Enable Audio Enhancements and Press Apply this causes the audio to be restored. I would, of course, have to?click on the checkbox a 2nd time and hit apply if I?want the original setting retained for that checkbox. Even after the?audio is restored, the audio still has a good chance of dropping out again at some point, and I would need to reboot in order to be in less danger of the audio dropping out.
    Any idea what causes this? Thanks.

  • Can't find iPhoto photos after downgrading to Snow Leopard from Lion

    I had my photos on my External Hard Drive being used as a backup for TIme Machine.
    After downgrading to Snow Leopard from Lion (my computer was running rediculusly slow likely due to being so close to the minimum requirements), I can not access any of my Time Machine dates prior to the date I downgraded. I have reinstalled Lion to try to access the files that way, but am having issues finding my old photos.
    Any help would be appreciated as I've got about 15000 photos of my kids on there.

    There are issues with iphoto which changes versions..
    I would strongly recommend you do an archive of the TC before you do any more playing.
    I presume the TC is the only place you have these photos stored??? So your entire library is hard disk erase from total annilahation.. not good!!
    Load a real utility into Lion.. archive is not present on the new version.. why apple why??
    http://support.apple.com/kb/DL1482
    You can then do a full restore to an external drive.. or something fancy..
    Pondini is the saviour here.
    http://pondini.org/TM/15.html
    There is a specific section on iphoto and its pain.
    I strongly suggest you read the entire section from Q14-18 so you actually understand what TM does.

  • Can't use apps after downgrading then restoring

    There are some apps that I can't use after downgrading from Lion to Snow Leopard, then restoring the system back to Lion from a Time Machine backup.  These are things like Address Book, Mail, the App Store and Preview.  I get a message that says the program "couldn't open because of a problem".  How do I get these to work, short of having to buy Lion for 69.00 (as I can't use the App Store and get it for 29.00)?

    similar issue looking for an answer as well
    I just lost my HD after upgrading to Lion.  I don't have a lion boot up disk and I can't restore my Lion time machine backup using the Snow Leopard boot disk.   I tried installing snow leopard fresh with the thought of upgrading to Lion and restoring time machine backup from there.   Once I  install a fresh copy of Snow Leopard the App Store does not run saying I need Lion to run it which I can't get without the App store.  

  • Re-attaching audio to video after a detach?

    Any one know if re-attaching audio to video after a detach? I discovered(with irritation) that expand, rather than detach, is what I initially was trying to do. thanks!

    sorry, but your only option is to make a compound clip at that point. it explicitly states this in the manual:
    "To reattach an audio clip to its original video clip, you need to create a compound clip."
    http://help.apple.com/finalcutpro/mac/10.0/#ver549f212d

  • My iPod touch 5th generation data lost after downgrade from ios 8 to ios 7.1.2

    I have just downgraded my iPod touch 5th generation from ios 8 to ios 7.1.2 . after downgrading, all my data (apps, music, document) in the iPod touch were lost, but photos were manage to recover. when I connect to the computer, it show that others in the capacity column used up almost 18 GB of memory. What is in others? Why it used up so much memory?  How can I recover my lost data?

    You may not be able to restore the data since when you downgrade from a backup made with a new iOS version data does not transfer.
    An "other" larger than about 1 1/2 GB indicates corrupted files.
    What is the Other on my iPhone and How to Remove It
    What is "Other" and What Can I Do About It?
    Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
    iTunes: Restoring iOS software

Maybe you are looking for