Audio source for queue music. Source from Audio server?

UCCX 7.2 express enhanced
Can I some how source my wav file from a server or from Call Manager. The issue I am having is I have my wav files that are split inot 1 minute increments so I can count how many minutes it is and run a IF statement to play another menu.
Examlpe
Caller calls in and goes to queue
after one minute of queue music the caller hears "you are caller 1"
then the IF statement checks and sees how many seconds it has been
if it matches 3 minutes than plays a seperate menu
User chooses to stay in queu
Plays same one minute clip.
The issue is that same one minute clip is being played. what I would like is that it coninued to play the stream where it left off.
So I could just put in a 90 second MOH file but it still count as some of my places may want to check every minute and then they can choose to keep in queu or go to VM.
I added what I am talking about in the script as a attahcment

You could do something like this, set the hold music for the time alotment.
counter =0
START
Increment counter.
if counter = 1
Play Source wav
IF counter =2
play source wav
MENU OPTION
if counter <3
play source wav
MENU Options
HOLD MUSIC
DELAY 1 minute
END HOLD MUSIC
GOTO START

Similar Messages

HT4145 is it possible to use a sngle air port express both for streaming music to an audio system AND as a wireless base station

is it possible to use a single air port express both for streaming music to an audio system AND as a wireless base station

Yes you can - if it is your only router or it is after another Apple router - if you have a non-Apple router then it would have to be hard wired to create its' own wireless network.

Best Practice for Migration of BO from one server to another

Hi All,
I would like to know what is the Best pratice for Migration of BO from One server to another.
i have Installed BO Xi R2 on my server.
Thanks,
Anendu Bothra
Edited by: Anendu Bothra on Mar 5, 2009 10:24 AM

You need to copy your input and output file stores from the old server to the new server. By default these are located in the <Business Objects install path>\FileStore directory.
Then you need to stop the CMS, Right click the CMS,Click the Configuration tab, and then click Specify.
Choose Copy, then click OK.
Choose the version information for the source CMS database.
Select the database type for the source CMS database, and then specify
its database information (including host name, user name, and password).
Select the database type for the destination CMS database, and then
specify its database information (including host name, user name, and
password).
When the CMS database has finished copying, click OK.
Once this process has been completed start the CMS and click on update objects -> located on the top of the CCM.
I'd advise taking full backups beforehand.

Trying to separate music track from audio track

Hi all - I've been reading posts, but haven't been able to determine whether there is a way for me to separate a music track from an audio track.
I have a copy of a television show that aired, where the music and audio tracks have (obviously) been mastered to the point where it's one music channel.
I'm trying to extend the music a little further without including the people talking. Does anyone know any creative methods that would allow me to do this?
Thanks so much for your help.

No...not at a professional quality level. You would need to either collect enough of the music bed where no dialog or f/x are present or obtain the oringal source music - which could be anything from readily accessible library or commercial to no longer existant custom music.
Sorry...I know that isn't much help.
From a Non-Pro level...there are really only two tricks:
1) If there is enough contrast between music and everything else...about all you could do would be to EQ out the ranges where dialog exist. 300hz - 4Khz maybe. But that is also where the definition is going to be in the music.
2) If the music is in stereo and the dialog is not. You can try to elimate the dialog by inverting the phase of one channel and monoing the two togther. This will leave you with only L-R material. Again, not good enough for professional broadcast...but you can try it.

Audio standards for importing music.

Is it just me or is there complete apathy for the way that audio sounds now? It drives me up the wall the way that some listeners can bounce .mp4 files 10 times and not hear the loss in audio quality. I understand that the "standard" for my generation has turned in to the iPod earbud, but isn't there a better way to import? Maybe the solution lies in the mixing of music. No one listens to the songs they purchase on iTunes on high-end stereos anymore. Should we be mixing for earbuds?
Powerbook G4 15'' Mac OS X (10.4.8)

There's no "standard" for mixing and mastering audio so...
There are standards for file types but the "quality" of the converted music is left up to whoever makes the codec.
How would this standard for importing music work exactly?
I understand that the "standard" for my generation has turned in to the iPod earbud, but isn't there a better way to import?
Sure there is. Crank up the bit rate or go with lossless.
RIP a CD a few different ways and compare the RIP'd songs.
If size does not matter, use Lossless, AIFF or WAV.
About the only reason for MP3, AAC and other lossy codecs is to make the file size smaller.

How to find Info Source for Export Data source in Data Marts node

Hi
I need to load data from ODS to Info Cube. I created the Export Data source for the ODS. I can see the Export Data Source but in the Data Marts node of Info Source i cannot find the Info Source for the Export Data source i created. I replicated Data sources in the BW source system. I also tried to use Insert Lost Nodes from the Context Menu of the InfoSource node but nothing worked. Please let me know what i need to do to see the Info source in the Data Marts.
Thanks
Padma

In the infosource tab in RSA1 - use settings --> display generated objects
you will be able to see the datamart infosources..

NO PLAYBACK AUDIO CONTROL FOR MIC IN REALTEK HD AUDIO MANAGER.

I have a l355d-s7825 laptop that I can not get my mic to playback through the speakers. I have attached two screen shots that show my computer is missing the volume slider and playback option under mic. I have the latest driver installed with no help. I would appreciate if anyone can shed some light on this issue. Thank you. Oops couldnt get the pics in the attachments....if you google Realtek HD Audio Manager under images you will find the pics im talking about.

Satellite L355D-S7825
This image, Kevin?
I have the latest driver installed...
Sometimes those get corrupted. Did you reinstall?
Realtek Audio Driver for Windows Vista (32/64bit)
Did you try the Realtek control panel instead of the Windows one?
-Jerry

Edit GUID for Group? ACLs from old server no good

Hi, we're trying to upgrade from an old server running OSX Server 10.4.11 to a new Mac Mini running Lion Server. Our 'hopes & dreams' were to be able to keep everything the same so we could just switch over and keep working with no interuption.
Our needs are pretty basic, with only using 6-8 local user accounts (no network accounts), 2-3 main groups, and mostly file sharing and VPN.
So I tried to setup the users and groups with the same long names, shortnames, passwords and UID/GIDs as our old server. Then for our main old shared files drive, we cloned the entire contents to our new RAID drive using SuperDuper, making sure to check 'retain ACLs'. We were 'hoping' to retain all of the ACLs so we wouldn't have to reapply them to thousands and thousands of files/folders. Even with only a couple groups and not too many ACLs, it would still be a pain.
Unfortunately, when I examing the permissions for files & folders on the new drive, instead of the group short names for the ACE's it is listing a long number which I believe is a GUID?!? (instead of the group name 'sales' it might say 'A4688EB67-6478-AADE-AA97-006545897979' for the User or Group). But the actual ACE's applied are correct, so those did in fact stay intact.
- So am I understanding correctly that setting the same GIDs for the groups was not enough, there was a hidden 'GUID' that I was not aware of that is now out-of-sync?
- If so, is there any way to edit this number for a group so that the ACLs will find the proper groups again?
- If THIS is possible, how would I find the GUIDs for the old groups in Tiger Server so I could port them over???
- Any other options other than resetting all of the ACLs from scratch???
THANKS!

Sorry, was easier than I thought. Just haven't worked on the server in a while.
If it helps anyone for whom this isn't obvious, I exported the users & groups from the Tiger server using Workgroup Manager, then imported them into our Lion Server. This brings all the proper GUIDs with it and now all of our ACLs look correct.
Note to self: somtimes the easy method actually works (with all the differences, I wouldn't have been certain the Tiger users could be imported directly in).

Import Wizard vs LCM for Migration of BO from one server to another

Hi Experts,
Can anyone highlight the differences between Import Wizard and LCM (in terms of migrating/deploying BO from one server to another)?
We are currently using BO XI 3.0, which does not support LCM. I'd like to know if LCM has enough advantages to justify an upgrade to BO XI 3.1.
Any advice is much appreciated.
Linda

Hi Tim,
Thanks a lot for your reply. May I have a follow-up question?
For my client, the following deployment activities are necessary:
1) From Development server, to one Test server containing 2 separate sets of objects - one set for SIT, the other set for UAT.
Object (Connections, Universes, Webi reports) names in Test server will be different from those in Development Server due to the existence of 2 sets of objects on the same server.
   a) For SIT: Universe A on Development server -> Universe SA on Test server
   b) For UAT: Universe A on development server -> Universe UA on Test server
2) From Development server, to Training server.
   Same object names will be used in Training server.
   E.g. Universe A in Development server copied to Universe A in Training Server
3) From Development server, to Production server
   Same object names used in Production server.
From the above, there will be 4 rounds of deployment. Is Import Wizard sufficient? Or is LCM still the better option?
Thanks in advance for your advice.
Linda
Edited by: Linda on Mar 27, 2009 3:36 AM

Set default audio track for playback in Source monitor

So I'm an editor that is somewhat new to the profession and I am working on a project right now with close to 100 video clips in my project. Most of the clips have their audio recorded to track 2 but when I load the clips into the source window to find the footage asked for in my script there is no audio playback.
They play fine in the program monitor once placed in a timeline, because I have all the audio tracks are turned on until I do my mastering at the end of the project. To get audio playback in the source monitor I have to change the view option to audio waveform which shows a blank screen because there is no audio on track. I then go to the drop-down menu just below the video display and select track 2 at which point the audio waveform shows up and plays back fine. This isn't too arduous a process and isn't a great burden but it slows my workflow down considerably as I have to repeat the process for each new clip I load into the source monitor.
My question then is if there is anywhere in Premiere that I can set which audio track is the default audio playback track for clips loaded in the source monitor. I work on a lot of similar projects like this for the same client and they don't have the most rigorous standards for their shooters. This problem has come up before and will most assuredly arise again in the future so any tips/advice on how to fix this on my end would be much appreciated.
Thanks!

I'm not really sure.I don't do any shooting for the client and in fact don't have any contact with the shooters, we just do the post. They use a number of different freelance videographers all of whom have different equipment and procedures when it comes to formatting, orginization, etc.

Audio Interfaces for Classical Music, Firewire 400/800?

In the near future I will be getting a new MacBook or MacBook Pro, and I am looking to record classical music (brass, solo and ensemble, chamber groups, etc). Is getting the Firewire 800 port necessary or recommended for hooking up to a good audio interface? I am a bit confused as to how the bus power works and whether it has to be a 400/800 port.
I am looking at a MOTU Traveler and a Fireface 800. Any other suggestions?

I have read and experienced lots of driver issues with the MOTU stuff lately as well as many of others.
I currently own both a M-Audio Firewire 410 and 1814 both are fantasic interfaces. Both are firewire 400 and bus powered.
I personally don't see a need for a interface at 800...I have had no problems with my interfaces at 400

Itunes wont automatically update music library from audio cd

PLEASE help if you can...
I insert an audio cd. Itunes asks me if I would like to import it, I click yes. Import appears to occur. However, the songs do not appear in my music library. According to the apple support pages it should.
I then click import CD (bottom right) to try again, importing appears to occur again, but still no tunes in my library. I have tried everything I can think of. That is why Im now here!!
What am I doing wrong?
Emma

....to add to the last part... When adding to the iTunes library,- I need iTunes to make a quick-scan to verify that media I am adding isn't already in there,- preventing duplicates that make remedial tasks of removing* duplicates so annoying and unproductive...

HT1329 Can I use my iPod as the only source for my music?

I have iTunes backed up from my old computer on an external hard drive, but don't want to use up nearly half of the hard drive space on my new computer for music storage. My iPod is 160 gig, so there's enough storage for music files. Just added the library to the mac mini and synced the ipod but don't know if I should delete the library (on the mac mini) after I go into prefrences and change the location of the media folder to the ipod.

You must have gotten an SSD in your mini, then: I didn't think of that initially.
While it is technically possible to mount an iPod and use it in disk mode to store an iTunes library, the iPod's drive is very slow and not designed for the sort of continuous use having it store your iTunes library would put it to, so I would not recommend using it as such. If you don't want to keep your library on the mini, use the external drive, or perhaps better buy another one to use for your library. You can pick up a 500GB USB drive for under $60 if you shop around.
BTW, marking your own post as being the one to solve your problem isn't a good strategy unless you did indeed find the solution yourself and do not need any further responses.
Regards.

Audio input for live music video, question

Hi
I'm wanting to use imovie to record some solo guitar performances. I would like to be able to process the audio through logic pro as I record the live audio and video. I have a digi003 audio interface and am able to use it as my audio input no problem, but am not able to add reverb and eq through logic pro. I open both apps and in logic I get the processed sound but as I record in imovie I only record the unprocessed guitar. How would i be able to do this? Thanks for the help!!

Hi,
Check Safari / Preferences - Extensions.
If you have any installed, turn that off, try that site.
For photos... back to the menu bar, click Safari / Preferences then select the Appearance tab.
Make sure: *Display images when the pages loads* is selected.
Carolyn

What is the best audio level for making a CD from video?

I know that -12dB is the optimum level for making a DVD. When I took this same level (peaking at -12dB), exported it to AIFF and then put it into iTunes and burned a CD, the volume was definitely lower than other CDs.
Does anyone know the standard level for CDs?
I'm doing this to convert a video of a concert into a CD.

The standard for CDs is basically -0.1. Generally, at least with pop & rock, the mastering stage puts the levels as loud as they possibly can be without distorting.
Plus, with content like music that is a little more consistent (level-wise) than dialog, SFX, etc., it's easier to ride it up closer to zero.

Audio source for queue music. Source from Audio server?

Similar Messages

Maybe you are looking for