Audio stopped on the internet

Hi there
All of a sudden I cant get audio when looking at stuff on the net. Itunes is fine.
Any ideas?
Cheers
Dave

Your audio settings may have been changed.
1. Open Audio MIDI Setup (/Applications/Utilities/), then check the Audio Output setting.
2. Change the Audio Output setting to 44100.0 Hz.
3. Quit Audio MIDI Setup.
More info on audio missing in iMovie here:
http://support.apple.com/kb/TS2289

Similar Messages

After a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.

after a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.

Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

ITunes suddenly stopped accessing the internet

iTunes suddenly stopped accessing the internet, so can't get to the iTunes store. All other programs running ok on my Windows 7, 64 Bit system. Have tried Windows Program repair and then Program un-install followed by Program reinstall - neither worked. Again, everything else works on my desktop PC. Even tried removing the anti-virus program. Still no luck.
Apple troubleshooting guide hints do not help.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Audio error on the internet upload

On a video I made its an audio error only on the internet upload. On the youtube-video the audio volume suddenly turns down at 0:19. The same place where I incerted audio from another video because of too much background noise on the clips I muted. In iMovie the whole video is fine, but on internet uploads the audio is too low from the 0:19 to the end. Anybody who have a clue how this can be fixed? The same problem on the facebook-upload as well.

Your audio settings may have been changed.
1. Open Audio MIDI Setup (/Applications/Utilities/), then check the Audio Output setting.
2. Change the Audio Output setting to 44100.0 Hz.
3. Quit Audio MIDI Setup.
More info on audio missing in iMovie here:
http://support.apple.com/kb/TS2289

Audio stops after the first song, iTunes keeps playing but no sound

So if I play anything - the entire library - podcast - or playlist. A few songs (between 1 to 3 songs) will play, but as soon as the song is done and it goes to another song the audio stops. I have Airport express through the house and it stops as well - so it's not the speakers.
If i hit pause then play.. the audio is on again. I can get it to play by selecting a new song as well.
It's pretty annoying.
If I let like 20 songs play all of a sudden on a random song that starts - the audio will come back for 1 song.
Anyone else have this type of issue?

Bumping to top again.
This has really become a terminal problem. Can't play more than a song without having to touch the system to bump back to the beginning of the track, where it plays fine. This can't be limited to my system only--any ideas or thoughts guys?
Thanks in advance.

IMac Stops Using the Internet Connection

While browsing, my iMac will suddenly stop communicating with the internet. AirPort, Chrome, and all Mac software are working fine, it just "forgets" how to connect. It shows everything is as it should and is still connected to my home network, but won't operate at all. The only solution is to reset from Time Machine. Anyone else have this problem?

Best way ti fix it !
iMac and MacBooks have the ( PHY Mode:    802.11n ) as standard
there not supporting 802.11g or other types
what you need to do
go About this Mac > More Info... > Overview > Than > System Report..
Than from the lest under Network - Wi-Fi
you will get report about your network Interfaces ,
your router name here :
PHY Mode:    802.11n
BSSID:    bc:76:70:5d:c6:a7
Channel:    7
Country Code:
Network Type:    Infrastructure
Security:    WPA2 Personal
Signal / Noise:    -74 dBm / -101 dBm
Transmit Rate:    52
make sure that your router setting on your router match the machine
in example the router set on : Mode:    802.11n only !
and Security:    WPA2 Personal
after that you mac will work faster and smooth
why is that happened ?
when your router set in auto mode , if any other pc or laptop join the network the router will change the mode from 802.11n than your mac will lose the connection setting and you will need to refresh the network
agin and agin and agin .
make sure you buy good router that support 802.11n
very easy job takes me 1 year for find it and no one have the right answer on the net

Audio issues with the internet

For some reason and all of a sudden I cant hear the audio on the internet. I have checked YOUTUBE (APP) and music and all of that and it works but I cant get any sound to come out when I am on the internet. Does anyone have any ideas of how to help or to remedy the problem?

I have listed some steps below that may help.
1.      Ensure that all volume levels are set to the appropriate level (e.g. media, system volumes) before accessing the web.
2.      Try clearing cookie data, cache, and history. To do this please follow the instruction below:
-Open the Internet icon.
-Select menu.
-Select more.
-Select settings.
-Select Clear all cookie data and select ok. **Some cookies contain customized preference and logon information for previously visited websites. Once deleted, the website may prompt for this information again.
-Select Clear cache and select ok.
-Select Clear history and select ok.
3.   Try clearing the data in manage applications. To do this please follow the instruction below:
-Select Menu
-Select Settings
-Select Applications
-Select Manage Applications
-Select All (located at the top)
-Select Internet icon
-Select Clear cache (please be advised that all saved bookmarks will be removed)
-Select Clear data (please be advised that all saved bookmarks will be removed)
4.    As previously recommended, try programming the device. *228 option 1 (***Nothing will be removed, lost, or replaced by this action)
5.    Complete a soft reset (power the device off, remove the battery, place it back in, and power it back on) ***Nothing will be removed, lost, or replaced by this action.

Audio stopped in the timeline, not muted. Plays in preview, how do I get it back?

Exiting CPTX did not reset either.

Please, could you give more details? Just guessing: when you preview, play the slide you do not hear audio? In that case check the small audio icon on the Timeline, maybe you clicked it and it got muted? And with Preview you point to the other Preview modes (like project, in webbrowser, next 5 slides) when a temporary SWF is generated. Since audio plays there, it must be the small audio button that has been clicked.

No audio when on the internet

For some reason, there is no audio on my computer. And it only happens when Im on the interenet and not when im offline.

Hi,
You might need to download the latest flash player ..
http://get.adobe.com/flashplayer/
Chandu
+Hp Everything is Possible.

Is there a fix for my video and audio stopping in the middle of playing but the video timer keeps going

This happens on YouTube, Safari and Music videos. I just got my iPhone 5s a week a go and this has been a problem since day 1. My phone is not jailbroken. Let me know if there's any other relevant information that would be helpful in answering this question.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You may have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
*Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox

Stop! the looping audio

I finally made my first Flash movie. Nothing special, it has
a little animation and a button that takes the viewer to my
website.
Unfortunately, the looping tune I included continues when
leaving the movie and going to the website. It continues to play
even when I play a/v files I have on the site.
How do I make the looping audio stop when the viewer clicks
the button to enter the website?
Thanks

I tried "stop all Sounds" action command for when the button
was down, but I got a message that actions could not be applied.
When I created a layer called "sounds" in the main timeline
and applied "stop all sounds to it, the looping audio did not play
at all.
I want the looping audio to play during the looping movie,
but I want it to stop when the viewer clicks the button and goes to
my website.
Ted

Is there a way to mute the internet, so that if there is an audio advertisement on a site i dont have to listen to it?

on Bleachexile.com there are ads at the bottom of the page that most of the time have audio. i do not want to hear them but i want to have Itunes up and going while im reading. is there a way to mute the site, or even the audio input from the internet so i dont hear anything on a site?

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement.

Why can't I use the Internet on my Mac?

I need help. My MacBook Pro as recently stopped using the Internet.
I went to a hotel to stay the night, and I tried connecting to their Internet on Mozilla, and it just keeps loading and loading and loading. So I tried Minecraft, and it kept loading and loading and loading and eventually it said, "could not connect".
I am now at my grandmother's home and it is doing the same thing. I tried Opera, and it still didn't work. I finally tried Safari and it still just loaded.
I tried to perform a software update, I though it would help, but I need Internet for that too.
I could really use some help here. Please let me know.
I am going to Apple on Monday if we can't fix it.
Help me please.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My wife's MacMini won't connect to the internet

We have a wireless setup working through an Airport Express - my iMac, my wife's Mini, her iPad, and an HP printer. Overnight her items stopped contacting the internet and printer. The message was "the WiFi has a self-assigned IP address" that is different from the IP address on my iMac (my connections work fine). By changing her IP address manually (to approximate mine) I got it to address the printer but still no internet. Some details:
My WiFi IP address: 184.57.150.132.
Airport Express IP and Lan address: 184.57.149.143
Her (former) IP address: 169.254.62.150
Her address (changed ) to reach the printer: 184.57.150.135
Complicating things: until yesterday the Airport Express was hooked through an old router we used for hardwired internet, thence to the Time Warner cable router. My Apple "IT consultant" son disconnected it and hooked AE directly to the TW router. My iMac apparently compensated for this with no problem (I have 10.10.1 OS). Her Mini is at 10.9.2 OS. With no internet connection I can't update her machine.
Any suggestions on how to reach the internet on her machine will be greatly appreciated.

My Apple "IT consultant" son disconnected it and hooked AE directly to the TW router.
Your son made a network error.. and you should tell him so.
You cannot replace a router on a cable modem without some careful setup.
I can see from your IP address that the Express is setup wrongly. It is in bridge mode.. it should be in router mode.
Go to the Airport utility.. you may or may not be able to reach the Express.. but if you can click on the device and then edit.. go to the Network tab and change the setting from off (bridge mode) to dhcp and nat.
If you cannot actually reach the express which is highly possible.. you will need to hard reset it. And you might be reluctant to do that without help.
Is the old router still a goer?? As an easy solution.. try putting it back into the network.. plug cable modem to wan port of the router and plug the Express to the router LAN port.. then you will need to power everything down.. wait say 5min and power up the modem.. then wait 2min and then the router.. another 2min wait and then the express. No luck try a longer power off on the modem.. say 20min.. it has to relearn what is connected.. ie the router and not your computer.
Or just ring your son.. get him to read the post and explain that your computer has captured the Public IP because the Express is bridged and it is a pure modem not a modem router.. the express therefore must be in router mode to work and everything needs to shut down and restart to get rid of the current dhcp lease on your computer.

IMovie DVD audio stops in middle?

Imported a one hour video into iMovie 11 from our new JVC video camera then exported it to iDVD.
It made the chapters into menu scenes as expected.
However, in the last scene, the audio stops in the middle?
I don't think there is a secret make the audio stop in the middle of a clip setting I could have accidently clicked on?
I've used the advanced menu to delete and recreate the encoding with no luck.
I've exported an image file and used Disk Utility to burn it with no success.
I've gone back to iMovie and shared it to iDVD again with no luck.
The sound is there in iMovie and iDVD but not on the disc using DVD Player?
On top of my frustration, everything I try takes an hour or more of waiting...
Who removed export selected clip from iMovie?
Please don't make me have to go use a PC. I thought my new laptop was an upgrade?
I understand that DVDs are a thing of the past now--just fix the bugs, "one more build!"
iDVD used to be fun like HyperCard back in the day and now it is embarassing to see the apple logo on the menu screen as the audio stops and everyone grabs the remote to check the volume and blame the sound system. It has now become a disappointing waste of time--I should just go watch YouTube videos of laughing babies and cats...

Hi Beverly
I have again created a disk image and the audio does not play half way through. I have since reloaded the audio on the corrupted half and am now creating another disk image and am burning at 4x as you suggested. If this does not work, do you think I should try reloading iMovie and iDVD again? I am using a Panasonic DVD player to play back the DVD, which I must admit does give me problems every now and then but I also have a cheapie Conia which believe me, plays everything and I have also tried play back on this, but still no go. Will keep you all posted, hopefully in a few hours. Thanks for your feedback.
Itzi
Message was edited by: itzi

Audio stopped on the internet

Similar Messages

Maybe you are looking for