Audio streaming with iWeb without advancing a page?

I set up my website with five menu buttons on the Welcome page which are linked to five different mp3 audio files. I published the public_html folder to a non .mac host. If you go to my website and click on an audio menu button on the Welcome page the site changes to a different page with a QT audio feed and you can hear the audio streaming. All well and good.
But I don't want my site to change to another page to hear that audio. Because when the visitors want to hear the next audio sample they have to click their backpage button and go back to the welcome page to start the process again. Each time they want to hear the next piece of audio they have to backpage return to the Welcome page.
Instead, while still staying on the Welcome page, I want the ability to stream the audio when a button is clicked, without being taken to another page. I want the visitor to be able to hear the audio without leaving the Welcome page.
Is there a way to do this?
Thanks, Panther

I'm sorry. I don't understand your instruction: target="myself"
When I'm using iWeb and I want to link the menu button to something my choices are:
One of my pages (which is a page within my iweb pages)
An External page (which is a URL off my site)
A File (which, in my case, is the audio mp3)
An email message (which directs the link to start up an email message with a predetermined email address)
So, what exactly is: target=myself?
Thank you for your reply
Panther

Similar Messages

Does my new XBR65X900C support 5.1 audio streaming with Netflix?

Hello, Does the XBR65X900C support 5.1 audio streaming via the optical output or ARC via Netflix or Amazon in 4K? I've tried connections to my receiver via ARC and also via optical, and the TV: - In Netflix never shows "5.1" as an option- Only outputs two channel in Amazon On the receiver I've tried two of the three audio options:- "Auto 1" setting, which outputs compressed audio with no changes- "PCM" setting I didn't select "Auto 2" at first which seems to be the same, but sends compressed, multi-channel audio with no changes but I'm assuming it would have no effect given the wording implies it simply sends two channel audio compressed without encoding. I did subsequently try the "Auto 2" setting, but it had no impact on the issue. I did try the same receiver (Onkyo TX-NR1030) with an LG TV and it receives a 5.1 source from the same Amazon account. The manual suggests the TV does in fact support streaming audio in 5.1, but I cannot seem to activate this on the TV. Please advise,Matt

I have just bought the KD55X8500C on Saturday, only to find that the TV doesn't have 5.1 for Netflix. I am yet to try google play movies, but from what I am seeing, I'm not holding my breath. It's 2015 SONY!! How can a $3k TV be sold that can't do 5.1 sound on streaming services, and no where on your site or in merchandising material to you highlight that this is a limitation of the TV. I want a Sony rep to tell IF this going to be fixed, WHEN it is going to fixed, or if not, where do I get approval to return my TV for a full refund so I can go buy a SAMSUNG that I know can do this. Again wont hold my breath - in Australia the tech support phone line is only available from 8am to 6pm on weekdays!! So only unemployed people can get support!

Protect blog made with iweb without using .mac to publish?

Hello:
I am getting to know my Mac and love it. I have domains and publish my first page with iweb. Everything works fine. However I wish to password protect my blog to only be seen by my familiy and friends. I know how to set it up, but it said it is not working if you do not publish to .mac. Now I don't want to do anything illegal here, but is there a way to still password protect my page or just my blog or am I out of luck. I like to have my own domain and also want to redirect to my business that way.
I am happy to hear any suggestions. Maybe I can even ad my .com website to .mac, but for now I do not know why I should other than to password protect my page. I have dreamweaver and would like to learn how to do web design as well.
Thanks for the help.
binchen
Message was edited by: binchen

Have you tried using iWeb to publish to your website to your domain? It's built in with '08. I don't really have a lot of faith that it would help, but it's not publishing to a folder. It's publishing directly to your website. Give it a shot.
The other option here is to mask your domain, probably not your first choice but you could do it this way. You could publish all of your stuff to .mac and then route your domain to the .mac website. Then to make it even more appealing, you can mask the .mac web address with your own domain. Thus giving you all the functionality of .mac without the .mac web address. Literally your users can just type in your domain and it will take you to it your site as it would and they would never have to know you were using .mac.
This is beyond my expertise and I have not tried it, but it is possible, I know many people that have done it. If you're interested, just do some research and it'll happen for you.

HP Wireless Audio streamer with Windows 8.1 (64 bit) on pc

I am running windows 8.1 (64 bit) on my laptop and recently purchased the HP Wireless Audio streamer. I was unable to install the software off the disc as it is not compatible with Windows 8.1. Any solutions? Please keep it simple as I am a rather lowtech person. Thanks.

Hi:
See if installing the latest BT driver directly from Mediatek (Ralink) works.
Bluetooth Driver(RT3290/MT7630)
6/25/2014
V11.0.754.0
Win7 Win8 Win8.1

Audio streaming with a microphone

Hi,
I want to realize audio streaming on the net using Java Sound API :
- I get a computer, server on witch I connected a microphone, and I want to capture sound and transmit it in real time on the network to any browser that request to play sound from my server.
- I want to use JMF API and I need also a code sample that solve my problem and I will adapt it to my project when mastering JMF
Thank you.

Hii Frends ..
Here is lick http://www.dickbaldwin.com/tocadv.htm. Go to the bottom of webpage and u will find a list of articles with live code for caputring and playing sound. hope ti would help
Regsrds

Audio Streaming with NetStream on LCDS or FDS

Hi. I can't make audio streaming working on FDS neither on
LCDS. I want to record audio on server.
When trying to :
quote:
new NetStream(this.netConnection);
i get
quote:
01:19:48,140 INFO [STDOUT] [Flex]
Thread[RTMP-Worker-2,5,jboss]: Closing due to unhandled exception
in reader thread: java.lang.IndexOutOfBoundsException: Index: 0,
Size: 0
at java.util.ArrayList.RangeCheck(Unknown Source)
at java.util.ArrayList.get(Unknown Source)
at
flex.messaging.io.tcchunk.TCCommand.getArg(TCCommand.java:260)
at
flex.messaging.endpoints.rtmp.AbstractRTMPServer.dispatchMessage(AbstractRTMPServer.java: 821)
at
flex.messaging.endpoints.rtmp.NIORTMPConnection$RTMPReader.run(NIORTMPConnection.java:424 )
at
edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPo olExecutor.java:665)
at
edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolEx ecutor.java:690)
at java.lang.Thread.run(Unknown Source)
The same code works fine on RED5.
What's wrong?
RTMP channel definition is :
quote:
<channel-definition id="my-rtmp"
class="mx.messaging.channels.RTMPChannel">
<endpoint uri="rtmp://{server.name}:2040"
class="flex.messaging.endpoints.RTMPEndpoint"/>
<properties>
<idle-timeout-minutes>20</idle-timeout-minutes>
<client-to-server-maxbps>100K</client-to-server-maxbps>
<server-to-client-maxbps>100K</server-to-client-maxbps>
</properties>
</channel-definition>

There are seeral apps that play music over wifi or 3G
Pandora, I(heart)music, Bing100, all free,

Audio streaming to speakers without TV on

when i stream a radio from my ipad to appletv2, audio will stop playing after i turn off TV.
my setup is
apple tv -> receiver (via hdmi) -> sony tv
is there a way how to stream music from ipad to my receiver via apple tv without tv turned on?
thank you

I have the same issue with the optical TOSLINK port. After a while when I try to stream music to my Apple TV, Apple TV is slectable on iPad and is on, but no music is sent via the optical link.
If I switch on the TV and retry sending the stream by deselect and reselect the Apple TV as streaming destination on my iPad, then it workes. After this I can switch of my TV and the music is playing the whole day long. Just that I have to set the Apple TV Standby to 10h.
I am on Software Version 4.4.4 (3330), crazy numbers :-)
regards, Rene

Quicktime Movies not streaming with iWeb

Maybe I'm doing something wrong.
When I created a movie using the Homepage feature in iLife05 the QT time movie starts playing immediately while it is downloading. See here:
http://homepage.mac.com/scarbrd/iMovieTheater17.html
I used iMovie in iLife06 and created a page for iWeb. This one does not stream like the older one. It downloads the entire movie beofre it starts playing.
http://web.mac.com/scarbrd/iWeb/Scarbroughs/Y%202%20K.html
Both of these movies are in the same .mac account.
In iMovie06, I used the "Share" feature and choose iWeb.
Am I doing something wrong? Any help is appreciated.
David
www.scarbrough.cc

The "streaming" feature refers to movies that are going to be broadcast from a QT Streaming Server. If you are hosting on .Mac you are not using a Streaming Server. What you want is progressive download where it mimics streaming, but it is actually allowing the viewer to view the movie as it downloads to their local machine (in the web browser's cache).
To do this, just enable Fast Start Compressed Header in the options.
Oh, and if you use the Streaming option, the movie has little "hints" added to it and that makes the file much larger than it should be. So, you might want to re-export the movie and post it again.

Help needed with iWeb- setting up Blog page

I have set up a website including a "blog" page using iWeb. I see that viewers can "subscribe" to the blog- but when I click on the subscribe button- I get an error message. What do I need to do so viewers can subscribe to my blog?

Since you do not provide factual information it is difficult to guess.
Where is the blog? And what is the message?
Anyway, let me guess. Your URL has no sitename in it.
If so, the rss feed links are broken.

4 video and 2 audio streams with AWS

Good time 4all! I've try to solve next task.
There are 4 IP-cameras in my local network, for example 192.168.1.40-192.168.1.44. So, task is to make broadcast streaming video from all of this cameras and sound from couple of those. The main question is next: HOW_TO_DO_THIS? ))) How redirect streams from local IP-s to FMS in Amazon Web Service, for getting four unique URL-s for each camera?

I would use a combination of client side and server side scripts. you could kinda do this like dns assign each ip address to a stream namd and then direct FMS to use that name as a stream name. or you cold just make sure you sanatize the ip address to a string datatype and use the resulting string as the FMS stream id.

HTML mail with iWeb?

I trust that everyone saw/received one of those e-mails, that are an html document (from a store as an example).
Is it possible to do that with iWeb? Design a page and export it as an html-e-mail?
Thank you.

I emailed it to Old Toad. I don't have your email!
I use an application called SerialMailer to create html flyers and send bulk email. If you do a lot of this kind of stuff it may be worth looking at.
I have some info here....
http://www.iwebformusicians.com/PromoPage/EBlast.html
Mail Chimp and Mad Mimi are two companies worth looking at as they do a really great service which is free for small numbers.
http://madmimi.com/
http://www.mailchimp.com/

Sharing with iWeb from iMovie- 2 questions

I asked this question in iMovie forum and was told to repost here:
I was wondering where the quick time file goes when you choose "share with iWeb" locally. I have been able to find it on the iDisk, but thought it possibly was saved locally too.
Also - I'm extremely confused with iWeb when viewing the pages it creates through Internet Explorer on Windows based PC's. I am able to see it on 25% of PC's, hear it on another 25% of PC's, and on 50% can't see or hear it. I have done searching and found no concrete reason why this is. I have updated the QT player, updated IE, and also gone into settings and allowed QT to be the default for all file types it wants. Any ideas?

ezweeb:
The movie files is copied into the Domain.sites file that's located in your User/Library/Application Support/iWeb folder. That is the most important file of your site. It contains all of the building blocks of your site and if it gets damaged or deleted you'll have to start from scratch to recreate your site.
I strongly suggest you download and use varkgirl's Automator application to backup the Domain.sites file every time you make any changes to the site. You can get it here.
Many of the PC browsers do not handle the png files that iWeb uses frequently. The following are a number of tips I've gathered from this forum on how to help avoid creating png files and making the sites more compatible with the darkside.
1 - do not use and frames or borders, etc. around photos.
2 - don't use any reflections.
3 - create your own navigation bar with linked text* and turn of the iWeb Navigation bar. That's because the nav bar is all png based.
*Put your linked text directly under the Navigation bar. Then turn off the nav bar in the Inspector window. The nav bar will disappear and the linked text will move up to the top of the page.
4 - use only the web safe fonts from the Font pane.
5 - do not use drop shadow on fonts.
6 - turn off smart quotes
7 - if you add a jpg to a page don't resize it in iWeb as that will cause it to be converted to png. Resize it to what you need before adding to the page..
The above will reduce the number and size of files associated with a web page quite a bit. Photos with fancy frames and reflections can generate a thumbnail png of around 110KB whereas the plain version will be a jpg of only 28KB. Although it doesn't sound like a lot, it will speed up loading of the page and be more darkside (i.e. PC) friendly.
Run a test with a test site and publish to a folder. Then follow the hints above and publish to another folder and compare folders.
This site will show you how IE 7, 6 and 5.5 will display your site. I don't have access to a PC to determine how accurately it renders a site as Internet Explorer would. But you can try it out.

Transmitting audio stream by RTP

Hello:
I am trying to transmit audio stream with this code, but i dont get it work well.
The output is:
C:\RUN\EX14>java AVTransmit2 file:/c:/run/format/au/drip.au 1.1.9.147 45200
Track 0 is set to transmit as:
ULAW/rtp, 8000.0 Hz, 8-bit, Mono, FrameSize=8 bits
Created RTP session: 1.1.9.147 45200
Start transmission for 60 seconds...
Code to AVTransmit2.java:
* Use the RTPManager API to create sessions for each media track of the processor.
private String createTransmitter() {
     // Cheated. Should have checked the type.
     PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
     PushBufferStream pbss[] = pbds.getStreams();
     rtpMgrs = new RTPManager[pbss.length];
     SessionAddress localAddr, destAddr;
     InetAddress ipAddr;
     SendStream sendStream;
     int port;
     SourceDescription srcDesList[];
     for (int i = 0; i < pbss.length; i++) {
     try {
          rtpMgrs[i] = RTPManager.newInstance();
// The local session address will be created on the
// same port as the the target port. This is necessary
// if you use AVTransmit2 in conjunction with JMStudio.
// JMStudio assumes - in a unicast session - that the
// transmitter transmits from the same port it is receiving
// on and sends RTCP Receiver Reports back to this port of
// the transmitting host.
          port = portBase + 2*i;
          ipAddr = InetAddress.getByName(ipAddress);
          localAddr = new SessionAddress();
//*          InetAddress.getLocalHost(),
//*                                   port);
          destAddr = new SessionAddress( ipAddr,
                              port);
          rtpMgrs.initialize( localAddr);
          rtpMgrs[i].addTarget( destAddr);
          System.err.println( "Created RTP session: " + ipAddress + " " + port);
          sendStream = rtpMgrs[i].createSendStream(dataOutput, i);
          sendStream.start();
     } catch (Exception e) {
          return e.getMessage();
     return null;
The code receptor is working well, because I tried it with JMStudio.
Why it doesnt transmit ?
I need your greatly help.
Thanks.

What is different from your previous question ?

Can I use iWeb without .mac?

I can't figure out if I can create a web site with iWeb without having a .mac account. Apple implies, but is not stating it conclusively, just recommending it:
"iWeb publishing requires Internet and webserver access (.Mac recommended)".
I have no need for .mac and have web hosting elsewhere. Does anyone know if I can just use iWeb to create my website and publish elsewhere?

PS Here's a note on tips for this:
http://homepage.mac.com/thgewecke/iwebserver.html

Problem publishing Photo page with iWeb 08

Hello,
I have a problem when publishing photo pages with iWeb 08. Upload starts and then I get the error message that iWeb encountered a problem while publishing. The funny thing is that I can see
the photo page in Safari. The only problem is that when starting the slide show I can not see the
forward/backward buttons. Publishing a photo page with iWeb from a .me web photo gallery works without any error message, but still when starting the slideshow the navigation buttons are not displayed. Actually if you click on the place where the navigation buttons are supposed to be,
you can go picture forward/backward. Any idea ?

I am having the same issue, except I do not get any error messages when publishing to a folder. Clicking on the "index" file within the folder will open the photo page in both Safari and Firefox. Everything functions as designed except no forward/backward/pause buttons are visible below the slideshow. There are text box outlines with a question mark where these buttons are supposed to be located, and I can pause, advance or reverse slides. Eventually these question mark outlines disappear and stay disappeared.
The end result is there are no intuitive graphic indicators on the slide show to even suggest to the viewer that he/she has some control over the presentation. I don't believe I can add explanatory text boxes to the slide show to compensate for the missing icons. This lack of visible control elements in the slide show is a huge issue. I am reasonable sure the problem does not reside within my computer. I've also reviewed inspector control options for a photo page/slide show and haven't gotten any combination of check boxes to make a difference.
I'm beginning to think this may be an unexpected conflict that was contained within a recent software update. It might well be worth a close look at programming code by Apple technicians. In the meantime, can anyone offer a clue as to what might be going on?

Audio streaming with iWeb without advancing a page?

Similar Messages

Maybe you are looking for