4 video and 2 audio streams with AWS

Good time 4all!  I've try to solve next task.
There are 4 IP-cameras in my local network, for example 192.168.1.40-192.168.1.44. So, task is to make broadcast streaming video from all of this cameras and sound from couple of those. The main question is next: HOW_TO_DO_THIS? )))   How redirect streams from local IP-s to FMS in Amazon Web Service, for getting four unique URL-s for each camera?

I would use a combination of client side and server side scripts. you could kinda do this like dns assign each ip address to a stream namd and then direct FMS to use that name as a stream name. or you cold just make sure you sanatize the ip address to a string datatype and use the resulting string as the FMS stream id.

Similar Messages

  • I am trying to import video and the audio doesn't upload with the video. Help.

    I am trying to import video and the audio doesn't upload with the video. Help.
    I upgraded to iMovie 11 because the previous version wouldn't read the type of video I was importing (VOB).  The video imports but not the audio, what do I do?

    What are you capturing from?  You may not hear the auido as it's captured but it will be there.  After it's captured can you see the audio waveforms? Do the audio meters move when you play the clip?  If so then go to "View" then "Audio Playback"  and set it to 'Built-in Output" if you're monitoring audio through the computer.

  • How to split video and extracted audio clip at same time?

    I imported 10 min of DV from my Sony HC96 camcorder to iMovie 6.
    I selected a video clip and split it using cmd-T but the extracted audio clip below it did not split. How can I split both the video and underlying audio clip so I can drag the edge of the new video clip for editing by direct trimming and keep the audio dialogue in sync. I have already gotten the clip volume levels right in the extracted audio.
    This seems pretty basic editing but I must be missing something.
    thanks, ralph
    1.67 GHz 17" PB, PowerMac Dual 2.5 & 23" Cinema Display   Mac OS X (10.4.8)   Airport Extreme Base Station and Airport Express

    Thanks, Sue. Let me see that I have this right. I split the video then the audio. I then selected and trimmed the video to the remove the 10-15 seconds I wanted to remove. To keep the dialogue in sync with the speaker's lips, I then selected and trimmed the audio to the same time as I trimmed the video. Then I dragged the audio clip back up to the new start of the trimmed video clip. I did this and the dialogue and lips seem to be in sync.
    I guess originally I had looked for a solution where I cut both clips at the same time and trimming one trimmed the other. But now I see I just need to do them separately. Thanks for the help, Sue!
    ralph
    Hi Ralph:
    You can't do both at the same time, but you can do
    them one right after the other. Highlight the audio
    and split it after you split the video and be sure to
    keep the playhead in the same position.
    Sue
    1.67 GHz 17" PB, PowerMac Dual 2.5 & 23" Cinema Display   Mac OS X (10.4.8)   Airport Extreme Base Station and Airport Express

  • New Media Encoder Error: video and/or audio filters are missing...

    My colleague reported this error popup window while using Adobe Media Encoder CC (up-to-date):
    "video and/or audio filters are missing and the rendered output may not match the original"
    I've been seeing similar errors the past few days. I can't remember if the wording was the same in the errors I saw, but the circumstances were the same.
    I've never seen this popup error before the most recent CC update.
    Some background info:
    I queued up multiple Premiere Pro pproj files as usual from within Premiere
    without rebooting or deleting any cache or temp files or anything, I start the queue
    I have no special plugins installed in Premiere. Vanilla CC install.
    Windows 7, 64-bit
    This error doesn't tell me what audio/video filter(s) are missing. The output files, once I dismiss this warning, are perfect.
    The major problem: It stops the queue dead in it's tracks. Sure, it might seem handy to stop and give you a warning, but when it's a false report and there's nothing wrong, it's killing us, because we queue up multiple files for encoding overnight, and we're not here to get the popups.
    What is likely causing this? Is it a bug that this is appearing so frequently? Has anyone else experienced this besides my colleague and I?
    Thanks!

    Update for anyone experiencing this issue:
    We are still investigating the cause of the issue and would really like your help tracking it down. If you run in to it I would be happy to jump on the phone with you and preferably do a screenshare as well. If you want to run some tests for me, this is what may help us track it down:
    0. Please make sure you are updated to the latest version of Premiere Pro and AME, which at this time are Premiere Pro 7.2.1 and AME 7.2.
    1. Simplify the project. Create a copy of the project and eliminate anything in the project that isn't related to the sequence(s) you are exporting. Then run the encode again. If it still occurs, move to the next step. If it doesn't occur any more, repeat step one and only remove half of the unused items (sorry, this is giong to be a manual process). Rinse, repeat.
    2. Open your sequence in Premiere and press Cmd/Ctrl + A to select all clips in your sequence. Right click and select Remove All Effects. Export again. No repro? Go to step 4. If it still repros, go to step 4.
    3. Make all the media offline. Export again. No repro? Go to step 4. Repro? Go to step 5.
    4. Send me a message with as much detail as possible. Even better would be if you could provide me a copy of your project file.
    Your help in tracking this issue down is greatly appreciated. Thank you.

  • WMV3Server plays avi files containing WMV3/9 video and MP3 audio

    WMV3Server
    To play avi files with WMV3/9 video and MP3 audio encoding on Mac OS X as of 2005-01-24 you will need:
    Mac OS X 10.2 or later
    WMV3Server
    Windows Media Player 9 for Mac OS X
    An .avi file containing WMV3 video and MP3 audio.
    Instructions:
    Launch the WMV3Server java application and click the "Open" button.
    A standard open-dialog window appears. Either navigate to the avi video file or drag the file into the open window to have the window switch to the folder that contains the avi video file. Select the file and click the "Open" button or press return on the keyboard. The open-dialog window should close.
    Next, click the "Start" button. The movie will be cached and WMV3Server will display "Server Started"
    Open Windows Media Player 9 for Mac OS X. Pull down the "File" menu on the menu bar at the top of the screen and select "Open URL..." Enter the following address:
    mmst://localhost:1755/
    Windows Media Player should connect, buffer and play.
    The download page (in Japanese) for WMV3Server is here:
    http://www.geocities.com/Tokyo/Bay/8128/
    The download link is:
    http://www.geocities.com/Tokyo/Bay/8128/WMV3Server-0.4.zip

    Update: By playing around with the settings in the Default Applications preference pane (a free download) I somehow got the files to open automatically in QuickTime Player (with Flip4Mac WMV 2.0.1 installed) and they now play (instead of showing white video as they had previously. Unfortunately, I don't recall what I changed.
    Here's a sample file (apparently a beer commercial.):
    http://x500.putfile.com/videos/b7-19302161753.avi

  • Saved project only produces video and no audio

    I created a simple project with ony one AVI file.  I applied a single effect -- rotating the video from the portrait mode in which it was shot to landscape mode.  When I play the project in Premiere Elements v. 9 there is audio as well as video.  But when I export the project to an MPG or AVI file there is only video and no audio.  What could be the problem?

    P-Elements 9 http://help.adobe.com/en_US/premiereelements/using/index.html
    >should not require its users to dig into the esoterica of codecs
    Just as soon as you convince every camera vendor in the world to create video that uses only one codec, at only one set of parameters, you will be able to use software that works exactly the same for all files
    Until then... you really do need to know what you have so you may tell the software what to do with what you have
    You can't shove a slice of bread into a DVD player, and you can't put a DVD in a toaster (unless you want a mess in either case)
    >Multiplexing was already set for DVD
    In that case, you are getting exactly what you requested... a video file with no audio, and a separate audio file

  • Re post: Editing-- Insert video and move audio, preserving sync

    Forgive me, a newbie, for posting this twice, but I think the iM6 group folks, not the iM8 folks, may have the a clue about this issue.
    I really love iM6. I do have FCExp, but I've gotten so comfortable with iM6 that I hate to change. But I am frustrated by one thing.
    I may be trying to do something too advanced for iMovie (6HD) but almost everything else with this product is so amazing, I can't imagine that they didn't build this in. I must be overlooking something.
    I am making dvds from a VHS conversion of some 60-70s 8mm home movies. A labor of love for an aging parent. The amateur filmmaker used to project them with records playing, and at some point he collected all his chosen LP music onto a cassette (not on the video cassette, a music only cassette). So, I play the VHS and the music at the same time and use an analog to Firewire converter and load all into iM6. So far so good. Then, because I need to seriously mess with the music to put it more or less in sync with the video segments, I extract the audio so it now shows up as a second track. Still no problem. Now in editing I clip or split the audio into separate pieces and checkerboard them, alternating between the two audio tracks in the timeline so I can adjust volumes, cross fade, etc.
    The first volume I did took a lot of twiddling and tweaking to keep all the clips in their proper places. I'd work at the end of the piece, then at the beginning then back to the end with the result that the audio clips were always sliding out of position. I can't quite figure out how to keep two audio tracks in sync with the video. BUT I did finally finish and when I started the next one, I swore that I'd always finish a segment and then move on to the next, always left to right, never tweaking the finished stuff to the left (earlier on the time line). This has made the job much easier but I have one big problem now. I did not think to put some black at the head of the project to put the titles on!
    You'd think I could just put the cursor at 0:00 and insert a 6 second title over black and it would move all the video and audio to the right by six seconds. But what happens is only the video slides over. The two audio tracks don't move and are now six seconds early. Sure, I could go ahead and re-adjust all the 30 or 40 audio clips, but I can't help thinking that "Apple wouldn't make me do this..."
    Has anyone any idea how to lock all the edited material together so I could insert some space to the left without losing sync?
    PS does anyone share my frustration on THIS: when I copy a little piece of sound from one of those tracks and then paste the copy, there's no telling where it will land... It never goes to the cursor position. If I'm lucky it lands somewhere on the timeline after the project end and I can drag it back to where I want it. But on an hour project this is annoying.

    I think I solved my own problem, and Klaus, you were correct, Lock to Play head is the key.
    In order to select ALL the clips on both tracks you click and drag a box across all the clips you want to lock and then select Advanced/Lock Audio Clip at Playhead and all the clips will be locked to their video positions, though in my case only a few of them sprouted little yellow pushpins. I was then able to slug 6 seconds of Black in ahead of my video, and voila!, both video and attached audio moved over staying in sync. I knew Apple wouldn't let me down, though the answer was not explicit in any Apple documentation. I guess I'd better buy the book now.

  • Scrambled Video and Static Audio

    Hey guys,
    I'm having a problem with a project I'm working on. I was doing a final run-through check of the video..so far so good. When I exported the project though and scrubbed through the final .mov, a lot of the video was scrambled and the audio has static at what appear to be random intervals in the video. I checked the project back in Final Cut Pro (version 6 by the way) and noticed that the video had indeed become scrambled and full of static. I can say for certain that the video was not like this when I edited it. So, I decided to look back at the source video in the capture scratch folder, and sure enough, for some odd reason, I had the same result. At random intervals of multiple soruces, there was scrambled video and the audio became full of static.
    I thought maybe there was a problem with the external hard drive I had stored the media on. So I used Techtool Pro and performed every test I could throw at it, and the drive passed.
    I can't figure out what caused this problem or how to fix it. Anyone have a clue?

    I've had this problem myself, and unfortunately never found a solution except for recapturing the footage and reconnecting media. But perhaps someone else will chime in.

  • Can anybody explain me how to sample and play audio files with logic's EXS2

    can anybody explain me how to sample and play audio files with logic's EXS24 Sampler???
    i cant find a way to upload and manage my own audio content on this sampler...

    i uderstand , thanx...
    i managed to open an audio file and placed it in the sampler,i can play t sample in the little keyboard in the zones section, howver i dont know how to play it with my controller... the sample shows in C1 on logic's keyboard but if i play C1 on my controller nothing happens... how can i fix this?
    Also, i noticed the sample plays from beginning to end once i click on it, how do i do to just make it last until i release the key? like a logic sound??? (in case i want to play a small portion of the sample only)
    Thanx

  • Pick only video and not audio to edit in timeline

    How can I only move the video and not audio to the timeline when I pick a clip I want?
    Everytime I drag it to the timeline it brings the audio and video and I have to unlink it and then delete the audio.

    Disconnect the audio in the patch panel at the left end of the Timeline window. Click the a1 and a2 source tabs to disconnect them from their destination tracks (A1 and A2 by default).

  • Prior to installing iOS 6 on my iPhone 4, I could stream video and audio via "Air Video" and "Stream to Me" from my PC, to my TV via a HDMI adapter. Now I can only get video and no audio.

    I have been able to stream,via wi-fi, TV shows, movies and music from my laptop through a HDMI adapter via my iPhone 4, to my television. I use mainly "Air Video" but also use "Stream to Me", both with the same results. Since the update to iOS6 this is not possible. I can still get video but now no audio. Help me!

    I too am having this very problem.  I have an iPhone 4S that is less than one year old.  Prior to updating my iOS firmware, I was able to record and transfer video to my PC and view it with a variety of programs without any modifications.  Since updating the firmware, all videos that have been taken are not viewable on my PC.  I can hear the audio associated with the video, but the video is blank.  I can transfer the file off my phone using the Windows transfer tool.  Then sync the video back to my phone and it works just fine.  I tried emailing the video to myself, that did not work.  I rebooted my computer, no luck.  I reinstalled QuickTime, still isn't working.  I can still watch the videos that were made with iOS 5.1.1 but nothing made with iOS 6.
    I have been successful with the following procedure:  Once the video is transfered from the phone to my PC, I change the extension from .MOV to .MPG and this makes the video viewable with Windows Media Player; however, if the video is shot in a portrait orientation, it displays sideways in WMP as a landscape orientation.  I have been able to then run the video through Microsofts MovieMaker program to right the video 90 degrees but the image comes out a little squatty like it's out of scale.  In either case, it serves the purpose and I can export it to another .MPG format that I can then run through Sony Vegas and edit as I see fit.  While it works, this is a huge hassle and I shouldn't have to do it.
    Does anyone know of anything that is working?  Are there new codecs somewhere that windows users need to get a hold of?

  • IPhone 4S and iPhone 5 Running iOS 6.0.1 and A2DP audio streaming on a 2012 Lexus RX350 (Factory Car Stereo)

    Hello Everyone,
    Before the release of iOS6 and the iPhone 5, I was able to use the A2DP audio streaming on my car no problems and I was really a happy camper, when upgraded my iPhone 4S to the iPhone 5 (Which came already with iOS6) that funtionality did not work any more, I reconnected my iPhone 4s running iOS 5.1.1 and worked like a charm, then I thought my brand new iPhone has bluetooth problem , that same night (Release data iPhone 5 and iOS 6), I update my iPhone 4S and prepare it to give it to my wife, then It occured to me to go and test the phone back on the car but now Running iOS 6 and "viola", the phone did not stream audio via A2DP. So yesterday Apple Release a minor update for iOS (6.0.1) and after reading the release notes (which it did not say anything Bluetooth enhancements) and updating my iPhone, went and try to test again the phone and did not work. (No A2DP audio streaming), Definatelly there is a problem, I called iOS Tech support and open a Case.  Here are the screenshots for the iphone and car stereo.
    Iphone:
    Car Stereo:
    Phone (Voice Feature) works fine with the car.
    This happens when trying to Connect the phone manually.
    If anyone had this problem in the past and solved, please let us know.
    Thanks
    Rommel J. Jimenez

    I had this problem with my iPhone 4 after upgrading to ios 6.0 (10A403).  I called apple support and was given a fix for my problem.  The Apple support rep had me do a reset on my Iphone.  The iPhone then worked with streaming music through bluetooth to my Lexus and also now works with the usb tether.  I did not have to delete the pairing, but that certainly wont hurt.

  • HP Wireless Audio streamer with Windows 8.1 (64 bit) on pc

    I am running windows 8.1 (64 bit) on my laptop and recently purchased the HP Wireless Audio streamer. I was unable to install the software off the disc  as it is not compatible with Windows 8.1.  Any solutions? Please keep it simple as I am a rather lowtech person. Thanks.

    Hi:
    See if installing the latest BT driver directly from Mediatek (Ralink) works.
    Bluetooth Driver(RT3290/MT7630)
    6/25/2014
    V11.0.754.0
    Win7 Win8 Win8.1

  • Quicktime 7.5 - Black Video and no Audio - Using Windows Vista

    Hello,
    I tried asking this, but I don't think I was clear enough.
    Current Computer - Dell Inspiron, Quad Core, 4gig Ram, < 1yr old.
    Running OS - Vista Home
    Up until recently Quicktime worked fine, then all of the sudden the video is gone.
    The audio is still there however.
    What I have done to try to resolve -
    1) Reviewed previous topics and tried the following -
    a) update Preferences to Safe Mode (That made a white stripe in the black screen)
    b) Update preferences to remove Direct 3D video acceleration, nothing changed
    2) Reinstall Quicktime 7.5 - No change, still shows BLACK video and will play audio
    3) Reinstall Itunes with Quicktime - No change still shows BLACK video and will play audio
    Thank you for any help you can provide!

    I have found a temporary workaround for this. I can open the indeo 5.1 formatted avi's in another program (either fade to black or virtualdub) and change/convert to another indeo codec called IYUV (as opposed to IV50) and while it renders a much larger avi file, those DO open in Quicktime, and when I export to convert this larger avi into a MOV file, it is about the same file size in the end product as the ones I render from the same 5.1 avi on the other computer. Knowing I can do this as needed saves me having to re-render all 400 or so of my avi's to another codec or lose them.
    I STILL think there is a fix out there that is related to somehow telling the registry to recognize the ir50_32.qtx codec the same as I finally did to get Windows MP to play these files, but I haven't figured out how to do that yet.
    Progress is supposed to make these files SMALLER with BETTER quality, but all I see so far with these "new improved" codecs is bigger files and no better (or even worse) image/sound quality. I'll change to more "modern" codecs when they show me one that is an actual improvement over the old one based on this criteria. And AVI remains the ONLY file format that can be extensively modified and edited artistically (zoom, crop, add watermarks and color filters and special effects). Apple is shooting themselves in the foot if they make us unable to open our AVIs in the pro version so we can continue to use QT Players on our web pages. I LIKE the mov finished product for both file size and quality, and I am happy to drive new customers to them as long as they let me convert my files in QT Pro. When I can't any longer, I'll convert every single website on all my websites player to Flash.

  • Does my new XBR65X900C support 5.1 audio streaming with Netflix?

    Hello, Does the XBR65X900C support 5.1 audio streaming via the optical output or ARC via Netflix or Amazon in 4K? I've tried connections to my receiver via ARC and also via optical, and the TV: - In Netflix never shows "5.1" as an option- Only outputs two channel in Amazon On the receiver I've tried two of the three audio options:- "Auto 1" setting, which outputs compressed audio with no changes- "PCM" setting I didn't select "Auto 2" at first which seems to be the same, but sends compressed, multi-channel audio with no changes but I'm assuming it would have no effect given the wording implies it simply sends two channel audio compressed without encoding. I did subsequently try the "Auto 2" setting, but it had no impact on the issue. I did try the same receiver (Onkyo TX-NR1030) with an LG TV and it receives a 5.1 source from the same Amazon account. The manual suggests the TV does in fact support streaming audio in 5.1, but I cannot seem to activate this on the TV. Please advise,Matt

    I have just bought the KD55X8500C on Saturday, only to find that the TV doesn't have 5.1 for Netflix.  I am yet to try google play movies, but from what I am seeing, I'm not holding my breath. It's 2015 SONY!! How can a $3k TV be sold that can't do 5.1 sound on streaming services, and no where on your site or in merchandising material to you highlight that this is a limitation of the TV. I want a Sony rep to tell IF this going to be fixed, WHEN it is going to fixed, or if not, where do I get approval to return my TV for a full refund so I can go buy a SAMSUNG that I know can do this. Again wont hold my breath - in Australia the tech support phone line is only available from 8am to 6pm on weekdays!! So only unemployed people can get support!

Maybe you are looking for