Audio usb ALSA error: No suitable mixer element found
Hello everybody.
I've installed arch last week. I've some problem with my usb audio. The audio usb device works but i can't use a mixer, so audio control is everytime set on max.
I can't use my normal intel audio 'cause is broken. This is my aplay -l output:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC268 Digital [ALC268 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: AUDIO [USB AUDIO], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
When i try to play audio files on audacious, arch give me following error: Audio usb ALSA error: No suitable mixer element found.
I've set the audio usb device as default with asoundconf. If i try to use hd intel audio, the mixer works good, but when i get back to usb audio, mixer is absent. There is a way to set a mixer for the usb audio device?
Last edited by Kalamaius (2014-05-23 14:34:13)
emeres wrote:
As for the usb sound card I would try setting those parameters:
autoclock=0/1
ignore_ctl_error=0/1
Kalamaius wrote:Intel audio is broken, I've a crackling sound all time. I changed the previous sound card but the new one that my personal computer technician mounted never works properly, isn't a new card but a used one.
Probably related to module options.
If you simply want to control the volume it would be easy to implement a softvol plugin. But this headset should have a volume control. What is the output of:
tree /proc/asound
tree /proc/asound
/proc/asound
├── AUDIO -> card1
├── card0
│ ├── codec#0
│ ├── codec#1
│ ├── id
│ ├── pcm0c
│ │ ├── info
│ │ └── sub0
│ │ ├── hw_params
│ │ ├── info
│ │ ├── prealloc
│ │ ├── prealloc_max
│ │ ├── status
│ │ └── sw_params
│ ├── pcm0p
│ │ ├── info
│ │ └── sub0
│ │ ├── hw_params
│ │ ├── info
│ │ ├── prealloc
│ │ ├── prealloc_max
│ │ ├── status
│ │ └── sw_params
│ ├── pcm1p
│ │ ├── info
│ │ └── sub0
│ │ ├── hw_params
│ │ ├── info
│ │ ├── prealloc
│ │ ├── prealloc_max
│ │ ├── status
│ │ └── sw_params
│ ├── pcm6c
│ │ ├── info
│ │ └── sub0
│ │ ├── hw_params
│ │ ├── info
│ │ ├── prealloc
│ │ ├── prealloc_max
│ │ ├── status
│ │ └── sw_params
│ └── pcm6p
│ ├── info
│ └── sub0
│ ├── hw_params
│ ├── info
│ ├── prealloc
│ ├── prealloc_max
│ ├── status
│ └── sw_params
├── card1
│ ├── id
│ ├── pcm0c
│ │ ├── info
│ │ └── sub0
│ │ ├── hw_params
│ │ ├── info
│ │ ├── status
│ │ └── sw_params
│ ├── pcm0p
│ │ ├── info
│ │ └── sub0
│ │ ├── hw_params
│ │ ├── info
│ │ ├── status
│ │ └── sw_params
│ ├── stream0
│ ├── usbbus
│ ├── usbid
│ └── usbmixer
├── cards
├── devices
├── hwdep
├── Intel -> card0
├── modules
├── oss
│ ├── devices
│ └── sndstat
├── pcm
├── seq
│ └── drivers
├── timers
└── version
20 directories, 63 files
Similar Messages
-
RWB error: no suitable sender agreement found
Hi Experts,
my scenario is File to proxy...
i am developed end to end scenario
i am using single stack i.e AAE
while checking in RWB it gives the error : no suitable sender agreement found
how to solve this error...
please help me on this..
Thanks&Regards
E.Ravi chandra reddyHi Ravi,
Please follow the steps in this blog if you want to send messages to an ICO using RWB
HowTo - Send Test Messages to the Adapter Engine (to an Integrated Configuration)
Hope this helps,
Mark -
Error no WBS billing element found while substituting WBS element
Hello,
I've this error while doing an intercompany billing.
I have to companies with cross company process in CO.
I've one project with only one WBS element, and I've insert it in the purchase.
I've chequed Billing documents in the WBS element.
Any suggestion?
Thanks in advance
Emilio RoldanDear expert
/thread/1505596 [original link is broken]
Error no WBS billing element found while substituting WBS element 00050923
Regards
Ajeesh.s -
1043000098 000001 Error no WBS billing element found while substituting WB
Hi friends,
I am getting below error any one please suggst me.
1043000098 000001 Error no WBS billing element found while substituting WBS element 00003999
Regards,
Ramana.First, check at sales order whether there is any billing block or incompletion log remaining.
Further refer, you can refer SAP Note 672929 - No billing because of error VF156.
Mostly this should Note should help you.
But, if still the SAP Note doesn't suffice your requirement.
Then further check is there any substitution rule active in sales order.
Or also check whether the delivering plant getting determined in sales order is relavent for the project.
Or check whether any subsituition rule is maintained for WBS Elements (TCode OPSN)which is getting triggered during billing.
Also, refer SAP Note 499389 - VA01/VF01: Check/derivation of the assigned WBS element
Regards
JP -
0080000096 000010 Error no WBS billing element found while substituting WBS
Hi All,
I had created two WBS element for company code 11 and company code 12 and assigned to two respective sales orders.
I am doing Inter billing (T-code: VF01) from co. cd. 12 to co.cd. 11and getting error "0080000096 000010 Error no WBS billing element found while substituting WB"
Please give your input if you faced similar type of issue earlier.
Your support is highly appreciable.
Many Thanks
YG.Yes ...Virendra...WBS element is the billing element and that is why we are done with assignment and deliver from sales order w.r.t PO.
Now at the time of Intercompany billing i am getting this error..... -
Solaris 8 Intel Installation Error: No suitable hard drives found
HI!
I was trying to install the free Solaris 8 Intel Edition from CD. All devices were recognized. Afterwards, however, I get the message that no suitable place was found to store the installation image. What should a hard disk look like in order to qualify for Solaris?
My system contains several hard drives. The first one, were I would like to install Solaris, is empty without any partitions. Under normal cicumstances (Linux, Windows), I would assume that this is the best possible case for a new operationg system...
Best regards
KlausKlaus,
I am having the exact same problem as you. I have the official Solaris CDs from Sun, but am not able to install Solaris on my PC. Installation progresses quite far - including screen, keyboard, time configuration - but then fails saying that it can't find any suitable HDDs.
I too, have two HDDs, one with Windows XP on it, and the other completely blank. However the Solaris installation does not recognise either of them.
I've even tried dis-connecting the Windows HDD in case it may have interfered somehow, but it has no affect.
Please see me message titled 'Intel Installation - Identifying HDDs' which I posted on this forum on 10th November. I haven't received any help on this issue.
Where do we go from here? -
Error no WBS billing element found while substituting WBS element 00050923
Hi,
Please give me some quick solution to overcome this error in my IDES. I have seen the note, sap help and othe rsuggession . could not get rid of this error.
Quick response is requested.The earlier thread was also unanswered.
Zinnisales order having account assignment at item level as WBS element. No substitution exist in sales side too. I went through the sapnote_0000499389. Still could not identify the reason of error.
As further adviced by SAP , I have checked following notes, still problem could not be solved.
672929 No billing because of error VF156
499389 VA01/VF01: Check/derivation of the assigned WBS element
Zinni
Edited by: Makwana Zinni on Oct 19, 2009 6:03 AM -
I am facing a problem when i am trying to use TOAD. Its giving me an error like
NO ROOT ELEMENT FOUND IN XML. Can someone help me in corrcting this Error ?
Regards,
Chandra deepNO ROOT ELEMENT FOUND IN XML. Can someone help me in
corrcting this Error ? That means the XML document is either missing the surrounding <element> ... </element> pair or has more than one pair at the base level of the document. Resolve that and you are done.
Now ... given that I am probably 4,000+ km away from you and can not see your screen, please look at your question and ask yourself whether you have given sufficient information for troubleshooting. <g> -
No suitable sender agreement found !!!
Hi,
I have created a sender file adapter and associated it with sender agreement. Now Im getting the error "No suitable sender agreement found".. I have activated all the associated objects and did complete cache refresh using SXI_CACHE..
Any thoughts..
- RamaniHi,
Performed below steps:
1. Checked all the MI, namespaces,etc in Sender Agreement.. Sender File Adapter.
2. The Sender File Adapter is activated and associated with Sender Agreement.
3. Did Complete refresh using SXI_CACHE.
Still I can see the error message "No suitable sender agreement found" under the Comm Channel.
Thanks
Ramani -
[SOLVED]No suitable archive manager found
I seem to be stuck in a vicious circle here. I am trying to set up Xarchiver because when I try to extract packages I get the error "No suitable archive manager found" It seems as though there is no archive managers that I can install with pacman. So the other way is to extract the downloaded xarchiver package into a folder and run makepkg and then use the resulting pacman. Of course in that process I have to extract the package......
Which is an obvious problem because if I can't extract the package and I need an archive manager to extract the package but I have to extract the xarchiver package to install it....
Well you get it.
Last edited by xworld (2012-07-22 02:16:31)xworld wrote:I need an archive manager to extract the package but I have to extract the xarchiver package to install it....
No, you don't need an archive manager to extract a package.
You really should ask yourself if Arch is the distro for you. Turning to the forums to solve every issue you encounter must be as tiring for you as it is draining for the community... -
Error message when mixing down audio
Hi gang
I occasionally get an error message when mixing down audio on a FCP 5.1.4 project. Message sez: File error: the specified is open and in use by this or another application.
I've never seen this before. No other applications are open at the time this message comes up.
thanks for any clarification.
CraigThanks for your reply. No . . . and if I try a bit later in the project, it seems to render the audio fine. Maybe I'll just trash my prefs and see what happens.
Craig -
Trying to record the school band using Garage band and a Pevey PV14 USB. Have connected the mixer to the Mac using a standard USB lead (is that a problem) but after enabling multitrack option we get the error message
'Can't enable track for recording. Input channel already in use.'
What are we doing wrong?
Thanksskim this tutorial:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks
(Let the page FULLY load. The link to your answer is at the top of your screen) -
Why am i getting error -43 after mix down on audio recording?
why am i getting error -43 after mix down on audio recording?
to where are you trying to mix down the file? a -43 is a file not found error
-
I have a xml file which look like this .
Original file:
<?xml version="1.0" encoding="UTF-8"?>
< root xmlns ="http://www.example.org/gvxml" application="Root">
< start/>
< form customizable="true" id="whichDigit" idcustomize="true" scopecustomize="true">
< field customizable="true" name="digit" text="Testing" >
< prompt customizable="true" text="Please say a digit" />
</field>
</form>
</ root>
I am trying to create another xml file from this xml file using the dom parser. In the new file
the text attribute should not be there but its value should come as an mixed element as shown
in the modified file.
File to be created should look like this one:
<?xml version="1.0" encoding="UTF-8"?>
<root xmlns ="http://www.example.org/gvxml" application="Root">
<form customizable="true" id="whichDigit" idcustomize="true" scopecustomize="true">
<field customizable="true" name="digit" > Testing
<prompt customizable="true" > Please say a digit</prompt>
</field>
</form>
</root>
The procedure which i am following is that While parsing the xml file whenever i am getting
text attribute then i am taking its value and putting it into the corresponding element
using Element.setTextContent(text).
The problem which i am facing is when both the parent element and child element are having
text attribute and while parsing i am using settextcontent for the parent element then it is
not going to the child element.
Please help in handling this situation
Thanks in advance
RahulWorks for me, after correcting a few sytntax errors and wellformedness issue :
SQL> select m.TNumber,l.ListTypeHolder,l.ListTypeOwner,l.CoverageValue
2 from XML_SAMPLE
3 , xmltable(
4 xmlnamespaces(DEFAULT 'http://www.xxx.com/Pway/Workfile')
5 , '$XS/Admin' passing object_value as "XS"
6 columns
7 TNumber VARCHAR2(255) PATH 'Information/TNumber',
8 Item_Fragment XMLTYPE PATH 'Lists/ListItem'
9 ) m
10 , xmltable(
11 xmlnamespaces(DEFAULT 'http://www.xxx.com/Pway/Workfile')
12 , '$LI/ListItem' passing m.Item_Fragment as "LI"
13 columns
14 ListTypeHolder VARCHAR(255) PATH 'ListType/@HOLDER',
15 ListTypeOwner VARCHAR(255) PATH 'ListType/@OWNER',
16 CoverageValue VARCHAR(255) PATH 'CoverageValue'
17 ) l
18 --where l.ListTypeOwner = 'false'
19 ;
TNUMBER LISTTYPEHOLDER LISTTYPEOWNER COVERAGEVALUE
1-1-123456 true true 100
1-1-123456 false false 200
1-1-123456 true true 300
(tested on 11.2.0.3) -
"Error While Trying To Synchronise Audio And Midi"...non-tempo event found
"Error While Trying To Synchronise Audio And Midi"...non-tempo event found
now when I shutdown Logic And relaunch the Project, the notes hang and "WHAT THE FRIIGIN"
(this was a bug way back when Logic7 was first released)
this is bad!
SvKThanks Steven.
big help. In our session we keep getting this problem where the song counter stops, the music keeps playing and we get an error message saying:
Non Tempo-Event found in Sync Reference
We looked in the tempo list and somehow there was a tempo event of 0.00 tempo in there.
We deleted it, got the same error message, but the prob seems to be fixed.
Apple, please fix this!
Thanks
Felix
Maybe you are looking for
-
I keep my iTunes library on an external hard drive 4TB. It's full. Can I use more than one hard drive to keep my library on? Like two 4TB next to each other.
-
Error during Installation of Oracle SQL Developer
When I double click on the sqldeveloper.exe to start the installation, I get the following error: "The program can't start becuase MSVCR71.dll is missing from your computer. Try reinstalling the program to fix this problem." I have a 64-bit Windows 7
-
Exceptions in sending SMS via SMPP
hi, i want to develop an application which is capable of sending & receiving SMSs using SMPP, i ve downloadd an application, it bound successfully with SMSC, when i try to send SMS it gives a nullpointer exception, i am new to SMPP programming, i sti
-
How Do I Remove This Gap?
Hey guys, I need some help with a page please. How do I get rid of the gap in IE7 between the bottom of the Spry bar and the image immediately below it? The gap is not there in FF. Not sure about IE6. The Spry bar is in a non-editable region of a tem
-
Can anybody help me to display double zero or leading zero in a pence column?
I am trying to convert a public service form which uses sep. columns for pounds and pence - I understand that this is madness but I have to use this for now. I need pence to show as 00 or 06 or 12. In MS Excel it is straightforward but Numbers seems