Audit the IP adress and computer name

Hello,
I need to audit the IP adress and the computer name from where a user logged into Hyperion Planning.
Is there any way to audit that?
Or any log where i can see that?
Thankyou!
Nat

What iP address is shown? If it starts with 169 yo never connect to the router.
Have you tried powering off and then back on your router?
Does the iPod successfully connect to other networks?

Similar Messages

Why does the local network and computer name keep changing?

After upgrading to Yosemit the local network name and computername on my iMAC keep changes link:
Mycomputer-1
Mycomputer-2
Mycomputer-3
Why?
I have tried to change it back in sharing and network locations.
Is this also the reason the my iPhone cannot find my iPhone often cannot find my iMac when I will sync it? Then I have to restart the iPhone and iTunes on the computer. This happens very very often.
Maybe it also linked to these errors which the log is full of - many every minute:
19/10/14 12.11.09,522 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:256
19/10/14 12.11.09,543 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:12856
19/10/14 12.11.09,561 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:0
19/10/14 12.11.09,565 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:44032
I think the is some bug/clash between bonjour and other network protocols. That is only a guess.

After resetting the computer name and local host name to the correct name without the number I also shotdown my iMac, my AppleTV, my iPhone, my iPad and then rebooted my Airport/Time capsule it seemed to work at least for several days. But yesterday I discovered that my Apple TV now also has changed name to Apple TV (2).
I logged into iCloud.com to see my devices and here it was really wired. My Apple TV was called Apple TV (2) and my iMac also had (2) after the name. Then I checked it on the iMac but here it was correct! Why can it have one name on the iCloud and another on the computer.
I restarted both the iMac, Apple TV and Airport Time capsule then everything was correct also on iCloud.com.
But today the iMac was called the name (2) again on the iMac. And now the local host name also had -2 after the name. It has not always been both names that has changed. That is really wired. And today Wifi was not working on the iMac after wake from sleep. I changed the name back and rebooted again also the Airport Time capsule. Now it is working again.
The log is still full of this messages:
02/11/14 19.22.13,186 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:1901
02/11/14 19.22.25,738 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:34051
02/11/14 19.22.25,758 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:12342
02/11/14 19.22.25,900 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:34051
02/11/14 19.22.25,919 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:1901
02/11/14 19.22.27,636 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:28772
02/11/14 19.22.27,683 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:27693
02/11/14 19.22.27,714 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:28533
02/11/14 19.22.49,833 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:29281
02/11/14 19.22.49,866 discoveryd[53]: Basic DNSResolver dropping message because it doesn't match the one sent Port:0 MsgID:28528
The name is not the only problem. Often itunes will not find my iPhone and iPad. Then i need to close iTunes and restart the iPhone and iPad then it works for some time.
And the iPhone and AppleTV will not always wake the iMac from sleep. I am wondering if the is linked to the changing of name.
I have seen by googling that it can be related to a sleep proxy problem so it seems like that here is two devices on the net with the same name that is why name is changing, but to know this do not help me to solve the problem. I have also seen all the suggestion to turn almost every services off on the computer, but again I it is not a solution and I have the iMac and devises to use the functionality not to shot everything down. So I do not really understand people saying turn off itunes, turn off blueboth, and turn off this and that.
Apple must soon come with a real solution. We are really many people have these problem since we upgraded to Yosemite and iOS 8.
I have also listed some of the iTunes errors from the log below:
02/11/14 19.24.48,160 com.apple.xpc.launchd[1]: (com.apple.quicklook[1364]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
02/11/14 19.24.52,279 Console[1368]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
02/11/14 19.25.06,907 iTunes[480]: Entered:_AMMuxedDeviceDisconnected, mux-device:5
02/11/14 19.25.06,908 iTunes[480]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:5
02/11/14 19.25.06,908 iTunes[480]: tid:17d8b - Mux ID not found in mapping dictionary
02/11/14 19.25.06,908 iTunes[480]: tid:17d8b - Can't handle disconnect with invalid ecid
02/11/14 19.30.19,234 com.apple.usbmuxd[56]: _SendAttachNotification Device 30:f7:c5:30:b8:2b@fe80::32f7:c5ff:fe30:b82b._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.
02/11/14 19.30.22,192 soagent[429]: Can't allocate SOHelper <SOMessageHelper: 0x7f9053a102c0> inside com.apple.soagent
02/11/14 19.30.54,871 iTunes[480]: Entered:_AMMuxedDeviceDisconnected, mux-device:6
02/11/14 19.30.54,871 iTunes[480]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:6
02/11/14 19.30.54,871 iTunes[480]: tid:1a23b - Mux ID not found in mapping dictionary
02/11/14 19.30.54,871 iTunes[480]: tid:1a23b - Can't handle disconnect with invalid ecid
02/11/14 19.32.06,137 com.apple.usbmuxd[56]: _SendAttachNotification Device 30:f7:c5:30:b8:2b@fe80::32f7:c5ff:fe30:b82b._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.

Error connecting, tap to retry, it sees my WiFi and computer name but can't connect

Hi all, I am trying to get Edge Inspect to work on my Windows 7 PC (it did work for me a few times when I had it installed as Shadow when it initally came out)
I have read through various forum posts. I am also running Mcafee Virusscan/Firewall.
In Google Chrome I have the extension installed at the little "In" symbol top right, when I click it it says Adobe Edge Inspect "On", please start the Adobe Edge Inspect Application.
I open up the lastest version of Edge Inspect (v1.0.393) on either my iPhone or iPad, it shows the name of my WiFi router and shows the name of the computer that is running Google Chrome, it looks like it is searching for a connection (shows spinner) and then it says "Error connecting, tap to retry".
I have opened up port 7682 in my Mcafee Firewall
I have shutdown all open programs
I have tried manually entering in the computer IP address via manual connect
I have updated chrome extension and ios apps to latest version
I have tried reinstalling chrome extension
I have tried at Windows Command prompt "netstat -ano" it doesnt show port 7682 being used, until I open up Google Chrome, then it shows MYCOMPUTER:7682 SYN_SENT, which I checked the PID against and yes it is Google Chrome using 7682
Any help would be great

Hi again Mark, still no luck here.
I also have a Mac in my network so I thought I'd try installing to that to see what would happen, I just installed Adobe Edge Inspect extension onto Google Chrome on that machine and restarted the iOS apps on both iPad and iPhone and they actually didnt see the Mac machine at all, still just shows the PC computer.
Also did I mention on my iPad I can still see the last time the connection actually worked (when it was called Adobe shadow, on my iPad underneath MYCOMPUTERNAME Error Connecting, tap to retry it has MYCOMPUTERNAME Last Used 24/07/12 8:59PM). Wouldnt have anything to do with a conflict with the old Adobe Shadow or anything would it, I'm pretty sure Adobe Shadow got uninstalled by default anyway, just a thought.
So I'm not sure if it can be a problem with the Router because nothing has changed with the router since the last time it successfully worked when it was Shadow? I did add the Mac machine to the network since this time, but that machine hasnt been on when I have been doing any of this testing anyway.
Also in the Edge Inspect in the Chrome browser I do not see any deviced listed, but back on the iOS App I do see the Wifi network and Computer name as discussed, so does this mean its an inbound connection issue or?
Also sent you router settings via private message etc.

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

Getting the user name and computer name

I've been trying to find out how to do this, but can't seem to get it.
I have an AIR application that needs to get the user's login name, and computer name for verification. I can't find anywhere to do this. Is AIR able to get this information? Is there work arounds if there isn't?
It won't ever be a web app, just an AIR app.

What I did in Air 2 to accomplish that is the following:
               public function getHostName():void {
                    if(NativeProcess.isSupported) {
                         var OS:String = Capabilities.os.toLocaleLowerCase();
                         var file:File;
                         if (OS.indexOf('win') > -1) {
                              //Executable in windows
                              file = new File('C:\\Windows\\System32\\hostname.exe');
                         } else if (OS.indexOf('mac') > -1 ) {
                              //Executable in mac
                         } else if (OS.indexOf('linux')) {
                              //Executable in linux
                         var nativeProcessStartupInfo:NativeProcessStartupInfo = new NativeProcessStartupInfo();
                         nativeProcessStartupInfo.executable = file;
                         var process:NativeProcess = new NativeProcess();
                              process.addEventListener(NativeProcessExitEvent.EXIT, onExitError);
                              process.addEventListener(ProgressEvent.STANDARD_OUTPUT_DATA, onOutput);
                              process.start(nativeProcessStartupInfo);
                              process.closeInput();
               import utls.StringHelper;
               public function onOutput(event:ProgressEvent):void {
                    var strHelper:StringHelper = new StringHelper();
                    var output:String = event.target.standardOutput.readUTFBytes(event.target.standardOutput.bytesAvailable);
                         output = strHelper.trimBack(output, "\n");
                         output = strHelper.trimBack(output, "\r");
                    trace('"'+output+'"');
The package that I used is from the manual:
package utls
     public class StringHelper
          public function StringHelper()
          public function replace(str:String, oldSubStr:String, newSubStr:String):String {
               return str.split(oldSubStr).join(newSubStr);
          public function trim(str:String, char:String):String {
               return trimBack(trimFront(str, char), char);
          public function trimFront(str:String, char:String):String {
               char = stringToCharacter(char);
               if (str.charAt(0) == char) {
                    str = trimFront(str.substring(1), char);
               return str;
          public function trimBack(str:String, char:String):String {
               char = stringToCharacter(char);
               if (str.charAt(str.length - 1) == char) {
                    str = trimBack(str.substring(0, str.length - 1), char);
               return str;
          public function stringToCharacter(str:String):String {
               if (str.length == 1) {
                    return str;
               return str.slice(0, 1);
And sorry for the miss topic I just realized that it is on flex topic, but I post it either way it may be useful for anyone

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

Mike wrote:
> Could someone tell me why this prototype-based lightbox
seems to work on one
> of my sites but not on the other?
>
> I literally took the exact same .js & css files,
copied them over from one
> site to the other, but it's only partially working on
the new site.
>
> Works :
>
http://www.roxanacampagiorni.com/
>
> Doesn't work :
>
http://www.vilverset.com/sample.html
>
> Been troubleshooting this one for days, and I'm stumped.
Script wants
> nothing to do with lightboxing HTML files on the new
site. Only straight
> JPGs. But it was written to work with them, and it
*does* work with them
> just fine on the *other* site.
>
> Where is the anomaly between the two sites that's
causing it to break in
> sample.html?
>
>
Not sure if this is relevant but on the page that works you
have these
js files linked - 4.....
<script type="text/javascript"
src="/scripts/jscripts.js"></script>
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
and on the page that doesn't - 3......
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
HTT
chin chin
Sinclair

MDT 2012 Windows 7 Deployment Stops At User Account and Computer Name Setup Page

I was given a sysprepped custom Windows 7 WIM image that was set up by a third party that didn't use MDT to create the WIM.
I created a task sequence to deploy it, but it never finishes. After the OS installs and it reboots, it comes up to the white setup page asking for a user name and computer name that looks like this image:
Is there a setting in MDT that can change that behavior?

Are you joining the computer to a domain?
It sounds like MDT did not create the unattend.xml file itself (or is there an unattend file already in the image itself?)
MDT needs to be able to autologin with the local admin account
From MDT in your task sequence - OS info - Edit unattend.xml you can check if your unattended file is correct.
Check what's in there for:
- computer name in 4 Specialize area - Windows-Shell-Setup_neutral (it should be empty if you want MDT to handle it).
- Also i think you need to have in the Specialize section, under Microsoft-Windows-Deployment_neutral - Run Synchronous an EnableAdmin insert
This will enable the local admin account
- Also check in phase 7 oobe System in Shell-Setup_neutral
There should be an autologon with a count of 999
Check if you have any Local Accounts there.
Finally read this:
When I am joining clients to a domain, can I avoid creating a local user
account on the computer?
Yes. To do this, create an image unattend file that adds a domain account to the Administrators group. In addition, you must delete the <LocalAccounts> section if it is present in your
unattend file (simply commenting it out will not work). An example file is below. Note that if domain join fails, Windows Deployment Services will not use the unattend file so you will be able to create a local account. For more information about creating
unattend files, see Automating Setup.
<?xml version='1.0' encoding='utf-8'?>
<unattend xmlns="urn:schemas-microsoft-com:unattend" xmlns:ms="urn:schemas-microsoft-com:asm.v3" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="amd64">
<UserAccounts>
<AdministratorPassword>
<Value>password</Value>
<PlainText>true</PlainText>
</AdministratorPassword>
<DomainAccounts>
<DomainAccountList wcm:action="add">
<DomainAccount wcm:action="add">
<Group>Administrators</Group>
<Name>DomainAdmin</Name>
</DomainAccount>
<Domain>DomainName</Domain>
</DomainAccountList>
</DomainAccounts>
</UserAccounts>
</component>
</settings>
</unattend>
I tried opening the unattend.xml from the MDT workbench, but it errors out saying it cannot be done because the captured image is x86.

How to get the job logs from sm35 by using the queue id and session name?

hi all,
can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
FYI..
i want to read this job log and i want to send it to an email id.
-> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module job_close.
but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
thanks in advance,
koushik

Hi Bharath,
If you want to download it to the local file then you can follow the instructions in the below link.
How to download Batch Input Session Log?
Regards,
Sachin

TS3276 ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working fine

ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working totally fine

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

What are the userid,password, and host name for oracle 9i?

HI Guys.
I am a research student at the University and the I recently downloaded Oracle 9i for my research. But the problems is also with seting it up. Please could you show me the userid, password, and host name for oracle 9i.
Thanks in advance for your cooperations.
Malinga R
[email protected]

I believe that starting with 9.2, you have to specify different passwords when you install (can't be the default).
Justin

STAD - get the 'transaction code' and 'program name'

Hi, I was wondering if someone knows about a bapi with which I can get only the "transaction code" and "program name".
I need to get those for a specified user, but I don't want to set on a trace, that's why I'd like to use the transaction STAD.
If anyone can help, thanks in advance
Grtz,
Dragovian

ok, so I go like this
TYPE-POOLS sapwl .
DATA: all_stats        TYPE sapwl_allstats.
CALL FUNCTION 'SAPWL_READ_STATISTIC_FILES'
   EXPORTING
     read_client                 = '*'
     read_time                   = '200000'
     read_start_date             = sy-datum
     read_start_time             = '000000'
     read_username               = sy-uname
     read_workprocess            = 'FFFF'
     wait_factor                 = 150
    CHANGING
      all_stats                   = all_stats
how'd I get "start-time" "report-name" "date" "username"?

Where will i get the method code and method name in Bpc

Dear Experts,
Thanks for watching this thread at the time of creating Consolidation methods they have
NEW
HOLDING
GLOBAL
PROPORTIONAL
EQUITY
lEAVING (END OF THE YEAR)
LEAVING(DURING THE YEAR)
Where will i get the method Code and method name.
Can you please guide me.
Regards,
Srinivasan.

The consolidation methods types you have listed are the standard ones provided by BPC for Consolidation Method types.
You can set the Consolidation Methods in the BPC Administration Console under Business Rules Library -> Consolidation Methods.
There you can see some defaults - you can remove these and set your own if you prefer.
You should read the BPC340 Training guide.

If I do a repair the windows small business server 2011 standard repair console, will I loose the user's and computer's that are currently setup on the server ?

will I loose the user's and computer's that are currently setup on the server?

Hi,
Based on your description, I understand you want to repair SBS 2011 console (please refer to
the TechNet article:
Repair the Windows Small Business Server 2011 Standard Console). However, worry about losing users and groups that be created by Windows SBS Console. As far as I know, those will not lose.
Since, when you create users and groups via SBS console, those are added to Activity Directory.
The SBS console is a GUI component, which makes it easy to configure and manage your Windows SBS 2011 Standard network. When you repair the SBS console, this component will be affected.
In view of your concerns, please back up before operation. It will help us to avoid some unexpected
issue.
Hope this helps.
Best regards,
Justin Gu

If we dont know the request no and program name how to find that program

hi gurus
can anyone suggest me
if we dont know the request no and program name how to find that program
thank you
regards
kals.

Hi,
            If u forget all the details It is very difficult to find, u have to remember at least some details regarding to that program.. for that
1..   goto SE80 give u r package name u will get all the programs which r u developed according to the discription u can get some idea which u want.. and
2... go to SE09 trcode.. display all tr numbers..here all trs are there what u developed,   u can get some idea by looking the description of the tr numbers..
I hope so u can get at least some thing .
Thanks and Regards,
Surya

Need to the domain name and computer name in offline mode

Hi,
I can not able to login to the windows system, the password i am using is correct. But im getting error "the login method using is incorrect, please contact network admin". I forgot the domain name i set to login to the system. Now Currently i
dont have the recovery/windows7 disks. I have Unix in my machine as well. so i have mounted the windows7 parition in linux, and trying to find out the computer\domain name. so please suggest which file i need to search to get the details.
Thanks,
Ravi

Hi Ravi,
If you want to know more information about domain name, please take a look at the following article.
http://technet.microsoft.com/en-us/library/cc731265(v=ws.10).aspx
Based on my research, the computer name and domain name are stored in the registry key.
We could find computer name in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\ComputerName\ComputerName.
And we can find domain name in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Domain.
Have you ever joined a domain?
If yes, please contact the network admin as mentioned.
And we can type Domain name\Username and then password to login.
If you haven’t, we could try to type Computer name\username(.\username) and then the password to login the computer.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Audit the IP adress and computer name

Similar Messages

Maybe you are looking for