AUR/Yaourt says "Continue building of $PKG?" etc, instead of its name

I don't know what I changed or if I accidentally uninstalled some unknown dependency but now I'm getting lines that say:
Continue the building of $PKG? [Y/n]
Continue installing $PKG? [Y/n]
Checking vote status for $_pkg
Do you want to vote for $_pkg inclusion/keeping in [community]? [Y/n]
I don't understand what happened because earlier it was saying the actual package name, like "Continue the building of sdcv?", sdcv being a package from the AUR. Anybody have any ideas with this, I mean, it's not a major dilemma but it's rather irritating. I foresee myself installing something that compiles for 5 minutes and then forget what I was installing and have to scroll up when it prompts me with "Continue installing $PKG?", lol.

Ok, I have:
1. Completely removed (-Rsn) Yaourt, cleaned cache, updated ABS (just in case, I dunno!)
2. Completely removed aurvote, customizepkg, pacman-color, colordiff and did same as above (just in case..)
3. sudo updatedb, searched for anything with the words from the packages above, found nothing except in /var
4. Looked in pacman.conf for anything out of ordinary; yielding nothing except defaults and user repos.
5. Reinstalled xorg core, cleaned cache, updated ABS
6. Reinstalled wget > pacman > Yaourt > aurvote > customizepkg > pacman-color > colordiff. Then 'sudo updatedb', update ABS (lol)
7. End up with same results as before: $PKG, $_pkg instead of package name. Very confusing and irritating, now.
This is bothersome as it becomes hard to keep track of what I'm installing especially when a package has a bunch of dependencies. So, I'm at a loss and am going to have to install another AUR Helper, I think.
EDITx2: Installed aurshell and it seems to work about as good as Yaourt. Maybe this was a blessing in disguise for me. Still curious as to why Yaourt messed up though.
EDITx1: Here's my yaourtrc, even though it's default.. maybe some suggestions?
# a
# a
# ~/yaourtrc - Configuration for yaourt
# See yaourt(8) for more information
# AlwaysUpgradeDevel no
# AlwaysUpgradeAur no
# AlwaysForce no
# AurVoteSupport yes
# AutoSaveBackupFile no
# ColorMod Normal
# ColorMod LightBackGround
# ColorMod NoColor
# ColorMod TextOnly
# DontNeedToPressEnter yes
# EditPkgbuild yes
# ExportToLocalRepository /where/you/want
# ForceEnglish no
# LastCommentsNumber 5
# LastCommentsOrder asc
# NoConfirm no
# PacmanBin /usr/bin/pacman-color
# PkgbuildEditor gvim
# SearchInAurUnsupported yes
# ShowAurComment yes
# TmpDirectory /where/you/want
# UpdateTerminalTitle yes
# Define here your prefered Sourceforge mirror: (none surfnet ufpr heanet easynews umn switch$
# SourceforgeMirror heanet
Everything with Yaourt in it:
[17:38:27][milo][~]: locate yaourt
/etc/yaourtrc
/etc/bash_completion.d/yaourt
/usr/bin/yaourt
/usr/lib/yaourt
/usr/lib/yaourt/abs.sh
/usr/lib/yaourt/alpm_backup.sh
/usr/lib/yaourt/alpm_query.sh
/usr/lib/yaourt/alpm_stats.sh
/usr/lib/yaourt/aur.sh
/usr/lib/yaourt/basicfunctions.sh
/usr/lib/yaourt/color.sh
/usr/lib/yaourt/pacman_conf.sh
/usr/share/locale/fr/LC_MESSAGES/yaourt.mo
/usr/share/locale/it/LC_MESSAGES/yaourt.mo
/usr/share/man/man5/yaourtrc.5.gz
/usr/share/man/man8/yaourt.8.gz
/var/lib/pacman/local/yaourt-0.9.2.5-1
/var/lib/pacman/local/yaourt-0.9.2.5-1/depends
/var/lib/pacman/local/yaourt-0.9.2.5-1/desc
/var/lib/pacman/local/yaourt-0.9.2.5-1/files
/var/lib/pacman/local/yaourt-0.9.2.5-1/install
/var/lib/pacman/sync/archlinuxfr/yaourt-0.9.2.5-1
/var/lib/pacman/sync/archlinuxfr/yaourt-0.9.2.5-1/depends
/var/lib/pacman/sync/archlinuxfr/yaourt-0.9.2.5-1/desc
/var/lib/pacman/sync/archstuff/yaourt-0.9.2.5-1
/var/lib/pacman/sync/archstuff/yaourt-0.9.2.5-1/depends
/var/lib/pacman/sync/archstuff/yaourt-0.9.2.5-1/desc
Last edited by milomouse (2009-04-24 22:24:31)

Similar Messages

  • [SOLVED]yaourt wants to build dependencies from AUR

    Hi,
    I've installed kdemod4... the only problem is that yaourt wants ti install all the dependences of the package(s) i've choose from aur, altough dependencies are present in extra (correct version). How can i solve this??
    An example is:
    cairo-lcd: i have to build all the dependencies from aur, like libpng,etc; but i see from PKGBUILD that the version that needs cairo-lcd is present in extra repository...
    thanks in advance
    Last edited by chesterfork (2009-07-13 10:07:26)

    ..i'm running kdemod 4 x86_64...so if i try install everything using yaourt the dependencies are shown in this way:
    ==> lib32-cairo-lcd dependencies:
    - lib32-gcc-libs (building from AUR)
    - lib32-libpng (building from AUR)
    - lib32-libxrender (building from AUR)
    - lib32-fontconfig (building from AUR)
    - lib32-pixman (building from AUR)
    - lib32-xcb-util (building from AUR)
    if it could help i found this:
    chesterfork ~ $ yaourt -S lib32-cairo
    lib32-cairo not found on AUR
    Packages that were installed as dependencies but are no longer required by any installed package:
    error:
    what about the error? it's a blank line.... i checked yaourtrc in /etc but it seems ok..
    It's happen even if i have these packages installed (and checking in pkg build they have are the same version). EVERYTIME yaourt shows that; cairo, cairo-lcd, bin32-skype-lib32-cairo-lcd....eveything i tried it needs dependencies from aur ONLY. That's the problem....there is a solution??

  • Internal Checkout Error using Xcode Continuous Build Service

    I'm trying to use the new Xcode service in Mavericks' Server Version 3 to setup continuous build for a git repository on BitBucket. I've been unable to get it to work successfully. Currently, The Build Agent Logs section shows the following error:
    Oct 30 10:02:11 Robot2.local xcsbuildd[72534] <Debug>: [CSRemoteServiceProxy.m:79 7a566310 +0ms] Received successful response.
    Oct 30 10:02:11 Robot2.local xcsbuildd[72534] <Info>: [CSConfig.m:55 7a566310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 30 10:02:11 Robot2.local xcsbuildd[72534] <Debug>: [XCSBuildHelper.m:97 7a566310 +0ms] Updating bot run with GUID 7163a252-b3c2-4fca-b9e3-d6128dbb9db4
    Oct 30 10:02:11 Robot2.local xcsbuildd[72534] <Debug>: [XCSBuildHelper.m:102 7a566310 +0ms] Updating bot run (7163a252-b3c2-4fca-b9e3-d6128dbb9db4): {
                  guid = "7163a252-b3c2-4fca-b9e3-d6128dbb9db4";
                  status = failed;
                  subStatus = "internal-checkout-error";
    Does anyone know what this error means or how to get more information about what's going wrong?
    Perhaps relevant: under the Source Control Logs section, it looks like the checkout worked fine:
    Checking out files: 100% (5570/5570), done.
    done
    SSH Known Hosts file path is located at /Library/Server/Xcode/Config/ssh_known_hosts
    SSH strict host checking is disabled (you can enable this by editing the SSHStrictHostKeyChecking key in /Library/Server/Xcode/Config/xcsbuildd.plist
    Untrusted HTTPS certificates is enabled (you can disable this by editing the TrustSelfSignedSSLCertificates key in /Library/Server/Xcode/Config/xcsbuildd.plist
    9373dd12aae68843938144663d4a1c578481447d refs/heads/master
    SSH Known Hosts file path is located at /Library/Server/Xcode/Config/ssh_known_hosts
    SSH strict host checking is disabled (you can enable this by editing the SSHStrictHostKeyChecking key in /Library/Server/Xcode/Config/xcsbuildd.plist
    Untrusted HTTPS certificates is disabled (you can enable this by editing the TrustSelfSignedSSLCertificates key in /Library/Server/Xcode/Config/xcsbuildd.plist
    The SSH lines seem to be informational rather than indicating an error. However, I've tried changing the mentioned keys without any effect, though note that Xcode says that TrustSelfSignedSSLCertificates is enabled on one line and disabled on a later line, referring to the same config file in both cases.

    I just had the same problem, and there is a number of things you can check:
    Make sure the specified branch is pushed to the repository
    Make sure the scheme you selected is shared
    Make sure the scheme info is pushed to the repository
    In my case, someone put `xcshareddata` in .gitignore, so the scheme I selected wasn't available to the bot.
    Hope this helps someone.

  • TS4036 I recently got the new iPhone 5c I used icloud to back everything up from my 4s to my new 5c.  Now, I keep getting a pop up that says Continue Restoring?  (This iPhone has not been backed uprecently because it has not finished being restored. Would

    I recently got the new iPhone 5c I used icloud to back everything up from my 4s to my new 5c.  Now, I keep getting a pop up that says Continue Restoring?  (This iPhone has not been backed uprecently because it has not finished being restored. Would you like to finish downloading any remaining purchases and media before backing up, or delete them along with any app date?)
    I seleted to finish downloading because I didn't want to lose anything.  It still will not finish downloading and I have tried this several times.
    What do I need to do to that I can get my iphone to back up and so that I can install the new iOS?

    Hello there, Brandifoote24.
    The following Knowledge Base article offers up an explanation of what you're error signifies:
    iCloud: Understanding Backup alert messages
    http://support.apple.com/kb/TS4576
    "This iPhone has not been backed up recently because it has not finished being restored. Would you like to finish downloading any remaining purchases and media before backing up, or delete them along with any app data?"
    This message is displayed if your iOS device has been trying to complete a restore for more than three days. This can occur if your restore has been interrupted due to network connectivity issues or some other problem occurs.
    Being that this is the case, you would want to go back to the article it seems you were referred to us from and try to restore from your icloud backup again:
    iCloud: Troubleshooting restoring an iCloud backup
    http://support.apple.com/kb/TS4036
    How do I restore an iCloud backup if my device is already set up for use?
    You'll need to erase all data and settings from your device, so first confirm that you have an iCloud backup to restore:
    Go to Settings > iCloud > Storage & Backup > Manage Storage, then tap the name of your device to view a list of iCloud backups.
    Check the date of the backup you want to restore, because you'll be restoring only what iCloud backed up on that date.
    After confirming that an iCloud backup is available, follow these steps:
    Connect your device to a power source and make sure that it is connected to the Internet via Wi-Fi.
    Follow the instructions for restoring your iOS device from an iCloud backup, which include making sure that your device is using the latest version of iOS.
    If the issue persists, then I would troubleshoot Wi-Fi using the following article:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...

    Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...
    So only one imac, only one ipad..and so on simultain.
    More over, all the divices are conect through wifi to air base but are not receiveing internet as i told above.
    I need to disconnect one device to have internet on the second one from the same type!
    Could somebody help me?
    Many Thnaks,
    dan

    If your network configuration is:
    Cable modem > (Ethernet cable) > [WAN] AEBS > (wireless) > Macs, then
    AirPort Extreme Base Station Setup (AEBS) w/High-Speed Cable Modem
    Modem/Router Power ReCycling
    - Power-off the Cable modem, AEBS, & computer(s). (If possible, leave the modem off overnight.)
    - Power-on the Cable modem; Wait at least 30 minutes.
    - Power-on the AEBS; Wait at least 5 minutes.
    - Power-on the computer(s)
    Perform a "hard" reset of the AEBS.
    - (ref: http://docs.info.apple.com/article.html?artnum=107451)
    Setup the AEBS
    With the network components powered down, set up the AEBS, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, try these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - AirPort Network Name: <whatever you wish or use the default>
    - Create a closed network (unchecked)
    - Wireless Security: Not enabled
    - Channel: Automatic
    - Mode: 802.11b/g Compatible
    Internet tab
    - Connect Using: Ethernet
    - Configure: Using DHCP
    - WAN Ethernet Port: Automatic
    Network tab
    - Distribute IP addresses (checked)
    - Share a single IP address (using DHCP & NAT) (enabled)
    Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
    AirPort tab (optional)
    - Create a closed network (checked)
    Change Wireless Security
    - Wireless Security: WPA Personal
    Base Station Options - WAN Ethernet Port
    - Enable SNMP Access (unchecked)
    - Enable Remote Configuration (unchecked)
    - Enable Remote Printer Access (unchecked)
    Wireless Options
    - Transmitter Power: 10%
    Access Control tab (optional)
    - + <add the computer(s) that will access this wireless network>

  • I keep getting an alert that says this build is for employees only

    I keep getting an alert that says "this build is for employees only"  when i try to log on to Facebook

    That would be an issue with the facebook app.
    Have you checked to see if an update is available?    

  • I keep getting an alert saying this build is for empoyee only comes when I try to go on line

    everynow and then I get an alert pop up on my iphone 3gs started last thursday alerts says This build is for Employees only don't know why it has happened just want to stop it from happening any help would be great

    There are numerous reports on the net that this is caused by a recent update to the Facebook app.  If so, I am sure an update will be released soon.  Example:
    https://www.facebook.com/topic.php?uid=6628568379&topic=25884&post=139267

  • How do I reinstall iWeb 3.0.3?  I inadvertently opened an html file of my website and tried to open it with iWeb '09. I get a message saying "Can't open file" etc., etc. I've tried reinstalling the updated version. Iweb will not open.

    How do I reinstall iWeb 3.0.3?  I inadvertently opened an html file of my website and tried to open it with iWeb '09. I get a message saying “Can’t open file” etc., etc. I’ve tried reinstalling the updated version. Iweb will not open.

    Delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder. Then launch iWeb and see if it opens. 
    What happened was trying to open the html file reset the file path that iWeb saves in its preference file to tell it where to go when you launch iWeb.  Deleting the pref file and launching iWeb creates a new file and iWeb looks in your Users/Home/Library/Application Support/iWeb folder for the Domain.sites2 file it uses to create your site.
    OT

  • HT4528 my phone says my build server is going to expire, what is that?

    my phone says my build server is going to expire, what is that?

    I always like to envison that these impatient... 'customers', who think they're being so cool, showing off their new 'iOS 7', being the cool kids on the block... and then their phone bricks in front of everyone.
    And I chuckle to myself.

  • Cross Farm Continuous build and deployment practice

    Hi All,
    What is the best practice to move the wsp deployments and content deployment from dev server to test server 
    and then test server to production? 
    powershell commands is one of the solution , but for continuous build and deployment is their any better practice?
    Is there any tool which keeps track of the deployments (similar to cruise control for build)
    Thanks and Regards,
     Swati
    SP Page: http://www.facebook.com/SharePointQ SP Blog: http://swatipoint.blogspot.com

    I think this is one of the way of doing this
    http://www.sharepointnutsandbolts.com/2011/06/sp2010-continuous-integrationpt-1.html
    SP Page: http://www.facebook.com/SharePointQ SP Blog: http://swatipoint.blogspot.com

  • Lync 2013 to Exchange 2013 Oauth problem - Error:[OAuthTokenBuilder:GetAppToken] unable to continue building token; no locally configured issuer

    Hi,
    I am having a problem getting OAuth to work from Exchange 2013 to Lync 2013.
    I have read and following the instructions online and cannot see what I am doing wrong.
    On the Exchange 2013 server, I get the following error when I run:
    Test-OAuthConnectivity -Service EWS -TargetUri
    https://exchserver2.domainname.local/ews/ -Mailbox "Jack"
    RunspaceId : 920118a3-6ab2-45dc-9b68-de68133de95e
    Task : Checking EWS API Call Under Oauth
    Detail : The configuration was last successfully loaded at 01/01/0001 00:00:00 UTC. This was 1059263714 minutes
    ago.
    The token cache is being cleared because "use cached token" was set to false.
    Exchange Outbound Oauth Log:
    Client request ID: 19ad80f6-7751-429f-aac5-e802105fbbc6
    Information:[OAuthCredentials:Authenticate] entering
    Information:[OAuthCredentials:Authenticate] challenge from
    'https://exchserver2.domainname.local/ews/Exchange.asmx' received: Bearer
    client_id="00000002-0000-0ff1-ce00-000000000000",
    trusted_issuers="[email protected]",Negotiate,NTLM
    Information:[OAuthCredentials:GetToken] client-id: '00000002-0000-0ff1-ce00-000000000000', realm: '',
    trusted_issuer: '[email protected]'
    Information:[OAuthCredentials:GetToken] start building a token for the user domain 'domainname.co.uk'
    Information:[OAuthTokenBuilder:GetAppToken] start building the apptoken
    Information:[OAuthTokenBuilder:GetAppToken] checking enabled auth servers
    Error:[OAuthTokenBuilder:GetAppToken] unable to continue building token; no locally configured issuer
    was in the trusted_issuer list, realm from challenge was also empty. trust_issuers was
    [email protected]
    Error:The trusted issuers contained the following entries
    '[email protected]'. None of them are configured locally.
    Exchange Response Details:
    HTTP response message:
    Exception:
    System.Net.WebException: The request was aborted: The request was canceled. --->
    Microsoft.Exchange.Security.OAuth.OAuthTokenRequestFailedException: The trusted issuers contained the
    following entries '[email protected]'. None of them are
    configured locally.
    at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppToken(String applicationId, String
    destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
    userDomain)
    at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppWithUserToken(String applicationId,
    String destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
    userDomain, ClaimProvider claimProvider)
    at Microsoft.Exchange.Security.OAuth.OAuthCredentials.GetToken(WebRequest webRequest,
    HttpAuthenticationChallenge challengeObject)
    at Microsoft.Exchange.Security.OAuth.OAuthCredentials.Authenticate(String challengeString, WebRequest
    webRequest, Boolean preAuthenticate)
    at Microsoft.Exchange.Security.OAuth.OAuthCredentials.OAuthAuthenticationModule.Authenticate(String
    challenge, WebRequest request, ICredentials credentials)
    at System.Net.AuthenticationManager.Authenticate(String challenge, WebRequest request, ICredentials
    credentials)
    at System.Net.AuthenticationState.AttemptAuthenticate(HttpWebRequest httpWebRequest, ICredentials
    authInfo)
    at System.Net.HttpWebRequest.CheckResubmitForAuth()
    at System.Net.HttpWebRequest.CheckResubmit(Exception& e, Boolean& disableUpload)
    at System.Net.HttpWebRequest.DoSubmitRequestProcessing(Exception& exception)
    at System.Net.HttpWebRequest.ProcessResponse()
    at System.Net.HttpWebRequest.SetResponse(CoreResponseData coreResponseData)
    --- End of inner exception stack trace ---
    at System.Net.HttpWebRequest.GetResponse()
    at Microsoft.Exchange.Monitoring.TestOAuthConnectivityHelper.SendExchangeOAuthRequest(ADUser user,
    String orgDomain, Uri targetUri, String& diagnosticMessage, Boolean appOnly, Boolean useCachedToken,
    Boolean reloadConfig)
    ResultType : Error
    Identity : Microsoft.Exchange.Security.OAuth.ValidationResultNodeId
    IsValid : True
    ObjectState : New
    It appears to work fine from Lync 2013 to Exchange 2013.
    When I run: Test-CsExStorageConnectivity -sipuri [email protected] -Binding Nettcp -Verbose in Lync 2013 I get a successful outcome:
    VERBOSE: Successfully opened a connection to storage service at localhost using
    binding: NetNamedPipe.
    VERBOSE: Create message.
    VERBOSE: Execute Exchange Storage Command.
    VERBOSE: Processing web storage response for ExCreateItem Success.,
    result=Success, activityId=0bbdc565-4a05-4b57-bf95-0c75488a1ef6, reason=.
    VERBOSE: Activity tracing:
    2015/01/02 19:15:55.616 Autodiscover, send GetUserSettings request,
    [email protected], Autodiscover
    Uri=https://exchserver2.domainname.local/autodiscover/autodiscover.svc, Web
    Proxy=<NULL>
    2015/01/02 19:15:55.616 Autodiscover.EWSMA trace,
    type=AutodiscoverRequestHttpHeaders, message=<Trace
    Tag="AutodiscoverRequestHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
    POST /autodiscover/autodiscover.svc HTTP/1.1
    Content-Type: text/xml; charset=utf-8
    Accept: text/xml
    User-Agent: ExchangeServicesClient/15.00.0516.004
    </Trace>
    2015/01/02 19:15:55.624 Autodiscover.EWSMA trace, type=AutodiscoverRequest,
    message=<Trace Tag="AutodiscoverRequest" Tid="30" Time="2015-01-02 19:15:55Z"
    Version="15.00.0516.004">
    <?xml version="1.0" encoding="utf-8"?>
    <soap:Envelope
    xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover"
    xmlns:wsa="http://www.w3.org/2005/08/addressing"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Header>
    <a:RequestedServerVersion>Exchange2013</a:RequestedServerVersion>
    <wsa:Action>http://schemas.microsoft.com/exchange/2010/Autodiscover/Autodiscove
    r/GetUserSettings</wsa:Action>
    <wsa:To>https://exchserver2.domainname.local/autodiscover/autodiscover.svc</
    wsa:To>
    </soap:Header>
    <soap:Body>
    <a:GetUserSettingsRequestMessage
    xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover">
    <a:Request>
    <a:Users>
    <a:User>
    <a:Mailbox>[email protected]</a:Mailbox>
    </a:User>
    </a:Users>
    <a:RequestedSettings>
    <a:Setting>InternalEwsUrl</a:Setting>
    <a:Setting>ExternalEwsUrl</a:Setting>
    <a:Setting>ExternalEwsVersion</a:Setting>
    </a:RequestedSettings>
    </a:Request>
    </a:GetUserSettingsRequestMessage>
    </soap:Body>
    </soap:Envelope>
    </Trace>
    2015/01/02 19:15:55.704 Autodiscover.EWSMA trace,
    type=AutodiscoverResponseHttpHeaders, message=<Trace
    Tag="AutodiscoverResponseHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
    HTTP/1.1 200 OK
    Transfer-Encoding: chunked
    request-id: 5917d246-64b0-48e2-ad79-f9b6cffb5bea
    X-CalculatedBETarget: exchserver2.domainname.local
    X-DiagInfo: EXCHSERVER2
    X-BEServer: EXCHSERVER2
    Cache-Control: private
    Content-Type: text/xml; charset=utf-8
    Set-Cookie: ClientId=FTFXWUQWWRJVBMNBG; expires=Sat, 02-Jan-2016 19:15:55 GMT;
    path=/;
    HttpOnly,X-BackEndCookie=actas1(sid:S-1-5-21-3691024758-535552880-811174816-113
    5|smtp:[email protected]|upn:[email protected])=u56Lnp2ejJqBx8jIn
    sqbxpvSz8rHx9LLzp7O0sbOzcnSzcqcmZqem8aempmcgYHNz87K0s/N0s/Oq87Gxc7KxcrK;
    expires=Sun, 01-Feb-2015 19:15:55 GMT; path=/autodiscover; secure; HttpOnly
    Server: Microsoft-IIS/8.5
    X-AspNet-Version: 4.0.30319
    X-Powered-By: ASP.NET
    X-FEServer: EXCHSERVER2
    Date: Fri, 02 Jan 2015 19:15:55 GMT
    </Trace>
    2015/01/02 19:15:55.704 Autodiscover.EWSMA trace, type=AutodiscoverResponse,
    message=<Trace Tag="AutodiscoverResponse" Tid="30" Time="2015-01-02 19:15:55Z"
    Version="15.00.0516.004">
    <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:a="http://www.w3.org/2005/08/addressing">
    <s:Header>
    <a:Action
    s:mustUnderstand="1">http://schemas.microsoft.com/exchange/2010/Autodiscover/Au
    todiscover/GetUserSettingsResponse</a:Action>
    <h:ServerVersionInfo
    xmlns:h="http://schemas.microsoft.com/exchange/2010/Autodiscover"
    xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
    <h:MajorVersion>15</h:MajorVersion>
    <h:MinorVersion>0</h:MinorVersion>
    <h:MajorBuildNumber>1044</h:MajorBuildNumber>
    <h:MinorBuildNumber>21</h:MinorBuildNumber>
    <h:Version>Exchange2013_SP1</h:Version>
    </h:ServerVersionInfo>
    </s:Header>
    <s:Body>
    <GetUserSettingsResponseMessage
    xmlns="http://schemas.microsoft.com/exchange/2010/Autodiscover">
    <Response xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
    <ErrorCode>NoError</ErrorCode>
    <ErrorMessage />
    <UserResponses>
    <UserResponse>
    <ErrorCode>NoError</ErrorCode>
    <ErrorMessage>No error.</ErrorMessage>
    <RedirectTarget i:nil="true" />
    <UserSettingErrors />
    <UserSettings>
    <UserSetting i:type="StringSetting">
    <Name>InternalEwsUrl</Name>
    <Value>https://exchserver2.domainname.local/EWS/Exchange.asmx</Value>
    </UserSetting>
    <UserSetting i:type="StringSetting">
    <Name>ExternalEwsUrl</Name>
    <Value>https://exchserver2.domainname.co.uk/EWS/Exchange.asmx</Value>
    </UserSetting>
    <UserSetting i:type="StringSetting">
    <Name>ExternalEwsVersion</Name>
    <Value>15.00.1044.000</Value>
    </UserSetting>
    </UserSettings>
    </UserResponse>
    </UserResponses>
    </Response>
    </GetUserSettingsResponseMessage>
    </s:Body>
    </s:Envelope>
    </Trace>
    2015/01/02 19:15:55.704 Autodiscover, received GetUserSettings response,
    duration Ms=88, response=NoError
    2015/01/02 19:15:55.706 Lookup user details,
    sipUri=sip:[email protected], [email protected],
    sid=S-1-5-21-3691024758-535552880-811174816-1135, [email protected],
    tenantId=00000000-0000-0000-0000-000000000000
    VERBOSE: Items choice type: CreateItemResponseMessage.
    VERBOSE: Response message, class: Success, code: NoError.
    VERBOSE: Item: Microsoft.Rtc.Internal.Storage.Exchange.Ews.MessageType, Id:
    AAMkADAwNWZkZWI0LWM5NGYtNDUxNy05Nzk3LWZhZjRiY2Y4MTU4NwBGAAAAAADLP1MgTEXdQ7zQSlb
    qPl++BwBauhRZTfLbTYZ+hBWtK784ANcdmUYqAACSqIurRqgYSZwMhT/IBw89AACnT6G9AAA=,
    change key: CQAAABYAAACSqIurRqgYSZwMhT/IBw89AACnip6b, subject: , body: .
    VERBOSE: Is command successful: True.
    Test passed.
    All my certificates on the Exchange 2013 and Lync 2013 servers are from my local CA.
    I use APP with the public certificates as my reverse proxy for people connecting from outside the network.
    In Lync, the OAuthTokenIssuer certificate created through the Lync deployment wizard is issued to domainname.local (my primary sip domain) and the Subject Alternative names include domainname.co.uk
    I then exported this certificate to the Exchange Server and use the Set-AuthConfig to use this certificate for OAuth.
    from what I read this was what I was supposed to do.
    is this correct?
    I have tried so many things I don't know what do to next.
    Should the OAuth certificate in exchange be the one exported from Lync?
    In Lync, should the OAuthTokenIssuer certificate include the servername or lyncserver.domainname.local or just be domainname.local like it is at the moment?
    thank-you
    jack

    Thomas,
    thanks for giving this the time. I have run the Configure-EnterpriseApplication.ps1 script following by remove-PartnerApplication so many times that I was wondering if there are other setting that
    Configure-EnterpriseApplication.ps1 creates that aer not removed when you run
    remove-PartnerApplication.
    is there a way to completely remove everything that is confirmed when you run
    Configure-EnterpriseApplication.ps1 so I can run Configure-EnterpriseApplication.ps1 without there being any configurations left from when I previously run that command?
    thanks
    jack
    [PS] C:\Windows\system32>Get-PartnerApplication |fl
    RunspaceId : cb2fb328-769d-4b32-8b7b-1fa35e2994f5
    Enabled : True
    ApplicationIdentifier : 00000004-0000-0ff1-ce00-000000000000
    CertificateStrings : {MIIGcDCCBVigAwIBAgITPgAAARIHL+ig32UAAQAAAAABEjANBgkqhkiG9w0BAQUFADBcMRUwEwYKCZIm
    iZPyLGQBGRYFbG9jYWwxHTAbBgoJkiaJk/IsZAEZFg1HdWlkZUNsb3RoaW5nMSQwIgYDVQQDExtHdWlkZ
    UNsb3RoaW5nLUFQUFNFUlZFUjEtQ0EwHhcNMTUwMTEwMTIxODIzWhcNMTcwMTA5MTIxODIzWjB7MQswCQ
    YDVQQGEwJHQjEPMA0GA1UECBMGTG9uZG9uMQ8wDQYDVQQHEwZMb25kb24xHzAdBgNVBAoTFkd1aWRlIEN
    sb3RoaW5nIExpbWl0ZWQxCzAJBgNVBAsTAkhRMRwwGgYDVQQDExNHdWlkZUNsb3RoaW5nLmNvLnVrMIIB
    IjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAyzDzaLsjJfktsbwIJ998ihsZM/0rKGdIt8rIx00oc
    HA7w0uVyz2UqnP9a8uRi6HkA7djbynlmGG0hKSUUQngXxz7q2dY6q9rcY5Rw2mJOMeppounx44FFp4+4e
    5HQKviLTYo+3DBGIR0mYDqxanKPS00d0f7HDLvmVb90hjdrbE372JBdcNNHs2OHRqg37bN2fAbwd22c9x
    2kvi0rESFnr+KcIGECVInCTHLJ7fwVqvi4hvRqtz7KLZsMXprpgeVDs45EMMRtwJ5Hw8uZR4CFz4dHSlo
    dIVgDPn8Ns2vGhcUK0JU4WkDbjnqo1SJzHlqtNjiu//wGcn77PAiM0yhyQIDAQABo4IDCjCCAwYwCwYDV
    R0PBAQDAgWgMCEGCSsGAQQBgjcUAgQUHhIAVwBlAGIAUwBlAHIAdgBlAHIwEwYDVR0lBAwwCgYIKwYBBQ
    UHAwEwHQYDVR0OBBYEFOY3whPicRAXNsTDSIg3FexpaCKdMHUGA1UdEQRuMGyCH0x5bmNTZXJ2ZXIyLkd
    1aWRlQ2xvdGhpbmcuY28udWuCH0x5bmNTZXJ2ZXIyLkd1aWRlQ2xvdGhpbmcubG9jYWyCE0d1aWRlQ2xv
    dGhpbmcuY28udWuCE0d1aWRlQ2xvdGhpbmcubG9jYWwwHwYDVR0jBBgwFoAUDHst3gUSMGwvkiNTPavmi
    UEWgtQwggEuBgNVHR8EggElMIIBITCCAR2gggEZoIIBFYaBzWxkYXA6Ly8vQ049R3VpZGVDbG90aGluZy
    1BUFBTRVJWRVIxLUNBLENOPURvbVNlcnZlcjIsQ049Q0RQLENOPVB1YmxpYyUyMEtleSUyMFNlcnZpY2V
    zLENOPVNlcnZpY2VzLENOPUNvbmZpZ3VyYXRpb24sREM9R3VpZGVDbG90aGluZyxEQz1sb2NhbD9jZXJ0
    aWZpY2F0ZVJldm9jYXRpb25MaXN0P2Jhc2U/b2JqZWN0Q2xhc3M9Y1JMRGlzdHJpYnV0aW9uUG9pbnSGQ
    2h0dHA6Ly9jcmwuZ3VpZGVjbG90aGluZy5sb2NhbC9jcmxkL0d1aWRlQ2xvdGhpbmctQVBQU0VSVkVSMS
    1DQS5jcmwwgdUGCCsGAQUFBwEBBIHIMIHFMIHCBggrBgEFBQcwAoaBtWxkYXA6Ly8vQ049R3VpZGVDbG9
    0aGluZy1BUFBTRVJWRVIxLUNBLENOPUFJQSxDTj1QdWJsaWMlMjBLZXklMjBTZXJ2aWNlcyxDTj1TZXJ2
    aWNlcyxDTj1Db25maWd1cmF0aW9uLERDPUd1aWRlQ2xvdGhpbmcsREM9bG9jYWw/Y0FDZXJ0aWZpY2F0Z
    T9iYXNlP29iamVjdENsYXNzPWNlcnRpZmljYXRpb25BdXRob3JpdHkwDQYJKoZIhvcNAQEFBQADggEBAD
    87GUPi02czEMO2Op0CeKBBpGwsfjYR9+RlC2uKAoH8PbWAxYNP3Ke6BtPeFy+95GGAJd5Z0+6LpO/AagA
    +zeY/tocZQjy0pYaU4/TPZgD+ZB/8sU982msu+8waO316ipBcf/87n9ZW3Jjk5DcVbtwrZErrGRe9DEn8
    QArN0jroLfaRtbDumse1Lp76+dxFuVhlLWcUXtIKaxm+UU9DS94EwJMtN54lDm3EG6hVdiGUR7TYqZU0K
    HGm7HciIhuO+2rhAazOBiIAAW6wZRUpFKZONSVD6bKrQCzL12LvynQ7XC6Itgr4JGzNCmoN43dXwVCkWo
    amTDdZY4h+QBqUvvY=}
    AuthMetadataUrl : https://lyncserver2.domainname.local/metadata/json/1
    Realm : domainname.local
    UseAuthServer : False
    AcceptSecurityIdentifierInformation : True
    LinkedAccount : domainname.local/Users/LyncEnterprise-ApplicationAccount
    IssuerIdentifier :
    AppOnlyPermissions :
    ActAsPermissions :
    AdminDisplayName :
    ExchangeVersion : 0.20 (15.0.0.0)
    Name : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
    DistinguishedName : CN=LyncEnterprise-786f61476b634278a3c9b9e4ec08b660,CN=Partner
    Applications,CN=Auth Configuration,CN=domainname,CN=Microsoft
    Exchange,CN=Services,CN=Configuration,DC=domainname,DC=local
    Identity : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
    Guid : 07495125-ccd4-4443-82d9-74fc3b955cdf
    ObjectCategory : domainname.local/Configuration/Schema/ms-Exch-Auth-Partner-Application
    ObjectClass : {top, msExchAuthPartnerApplication}
    WhenChanged : 10/01/2015 17:14:55
    WhenCreated : 10/01/2015 17:14:55
    WhenChangedUTC : 10/01/2015 17:14:55
    WhenCreatedUTC : 10/01/2015 17:14:55
    OrganizationId :
    Id : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
    OriginatingServer : DomServer2.domainname.local
    IsValid : True
    ObjectState : Unchanged

  • Can i tell Yaourt to just build packages?

    I'd like yaourt to just build my packages, but not install them and i'd like this to happens without user interaction.
    Is this possible?
    Thanks.

    What I do in my build automation script is essentially:
    cd ~/builds && yaourt -G $packagename && cd $packagename && sudo $makechrootpkghelper
    The problem with trying to automate things with makepkg or a makepkg wrapper, is that to install the needed dependencies, you need root permissions, but you shouldn't run makepkg as root, as the PKGBUILD may be malicious. The helperscripts in devtools build packages in clean chroots, so you don't need to worry about fecking up your install, just give your build user NOPASSWD sudo access for that command.
    My script still has problems with pkgbase PKGBUILDs, though that's more due to my laziness than anything, yaourt has logic to get around it, so it must be possible.

  • On shut down I get a window that says Continue the installation Choose abort if you wish to cancel the installation If I don't press anything or if I press Yes or Abort the message goes away and the computer shuts down.  This has been going on for ov

    I have a 27" iMac mid 2011 2.7 GHz intel core i5 with OS 10.10.1.  For about the last month when I shut down I get a window that says "Continue the installation Choose abort if you wish to cancel the installation  ABORT   YES".   If I don't press anything or if I choose ABORT or Yes the message goes away and the computer shuts down.  But the next time I use the computer and then shut down the message is back.  I have looked to see if there are any downloads pending or if there are any updates trying to download.  I am very puzzled.

    Genieo Adware is installed.  Removing it will help.
    If you have another browser installed, use it.
    If not, launch App store and get another  browser for temporary use.
    Remove it afterwards.
    1. Use  free  AdwareMedic by clicking “Download ” from here
        http://www.adwaremedic.com/index.php
        Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
        Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
        “Quit AdwareMedic”.
                   or
        Remove the adware  manually  by following the “HowTo” from Apple.
        http://support.apple.com/en-us/HT203987
    2. Safari > Preferences > Extensions
         Turn those off and relaunch Safari to test .
         Turn those on one by one and test.

  • Signing my application in a Continuous build/integration system

    I have a Mac OS X app and I recently obtained a digital certificate (Developer ID Application) to sign this app. I have the following questions about signing this app -
    Can I specify a particular certificate as an input to codesign so that it is not installed in keychain? So that in my environment (Continuous build/integration system), any available Mac could be used to sign my app?
    If not, then can I install/uninstall a certificate in keychain on a machine on the fly?
    Thanks!

    You will probably get a faster answer in the developer forum.

  • Installed Firefox 4.0, it crashed during it first open when it says things like transferring settings etc. now won't open. Have tried rebooting/uninstalling etc.

    Installed Firefox 4.0, it crashed during it first open when it says things like transferring settings etc. now won't open. Have tried rebooting/uninstalling etc.

    See [[Secure Connection Failed]]
    Create a new profile exclusively for the 4.0 beta version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
    * http://kb.mozillazine.org/Testing_pre-release_versions
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Maybe you are looking for

  • Paid apps do not show up on my iphone 3 after restore

    after i restored my iphone 3g the paid apps don't show up on the screen however, itunes and the app store say that they are downloaded also, in the iphone setting it shows settings for beejive and facebook they just seem to not show up, as if minimiz

  • Printer Queue Settings Mysteriously Reverting Back to Default Settings on 2008 R2 print servers

    Printer Queue Settings Mysteriously Reverting Back to Default Settings on 2008 R2 print servers We have 4 Windows Server 2008 R2 print servers, all of which has the same printer queues installed on them that are utilized by a 3rd party printing progr

  • LT10 "Immediate confirmation" of TO with Putaway strategy "C" Doesn't Work

    Hi , We have WM with HU implemented for a Plant/ Sloc Combination.In Warehouse we have multiple storage types. Putaway strategy "C' (Open storage) is implemented with SU in one of the storage type of warehouse. If we try to make internal movement wit

  • Receive mail with outlook problems

    goodmorning from greece i hava a problem with outllook 2007. Finaly i manage to connect outlook with exchange server 2013. When i try to send a mail to me (for test - inside the organization not over internet) from outlook it seems that the email was

  • APEX4: Validation failure. Is this a bug?

    Below is an extract of the debug output. P610_ORD is a database column text field. I have tried deleting the validation and item and recreating them. Short of deleting the page and starting again I have no idea what to do! Any suggestions. 0.06200 0.