Authentication Configuration Files

I have a situation with my EDGE installation where I cannot log in (to anything, even the CMC) because one of my authentication parameters is incorrect.  The error message I get is:
The NT Authentication plugin failed to verify the domain "seakr". Please make sure this domain exists and is accessible.
I need to unconfigure the external authenticators that I have enabled so that I can log on to the CMC and configure them correctly, but, since I cannot log in to the CMC, I'm going to have to do this using config files, registry entries, or DB tables.  Problem is, I don't know where this information is stored.  Can anyone point me in the direction of the config files, registry entries, or MS SQL DB tables where I can accomplish this?
Running Business Objects EDGE 12.0 on Windows Server 2008.

Sebastian Wiefett wrote:
Hi,
>
> the Enterprise option isnt a Domain. Its the build in Authentication of BOE. So the password for the Enterprise Administrator is not the password as for your Domain Administrator.
>
> If you have forgotten your Enterprise Administrator password, check SAP Note -  1320151
>
> Regards
> -Seb.
Yes, I'm quite familiar with how authentication works in CE/Business Objects/EDGE.  As previously stated, I am attempting to use the "Administrator" account selecting "Local Enterprise" as the authentication method.  I have not forgotten my Enterprise Admin password.  However, when I try to log in as the Local Enterprise Administrator, I receive an error about this domain.  So, getting back to my original question - where are the config files kept that control this, or, how can I deconfigure a domain authentication method when I cannot log on to the CMS console?
-Nick

Similar Messages

  • Reading Encrypted Password from Configuration File and Decrypt it at login

    Hi All,
    My application reads a configuration file to connect to the ORACLE database. The values defined for password are clear text as given below:
    user: 'mh'
    password='abcd1234'
    Is there is any way I can give an encrypted password in the configuration file instead of a clear text file and at the time of login ORACLE decrypts it. I am using ORACLE 11g Database.
    My company have a requirement that passwords are not stored in the clear in properties files. the reason being I suppose that if the password is stored in plaintext someone could hit the property file directly, get the password and then connect to the database with it.
    For a regular user connecting through an Oracle client or SQL Developer they would need to have the plaintext password in order to connect.
    its based on the requirements of
    International Standards Organization Guidance
    ISO 17799 � 9.5.4 requires password management systems to:
    � enforce the use of individual passwords
    � allow users to select and change their own passwords if appropriate
    � enforce a choice of quality passwords
    � force regular changes of passwords
    � maintain a record of previous user passwords to prevent re-use
    � not display passwords when they are being entered
    � store password files separately from application system data
    � store passwords in encrypted form using a one way encryption algorithm
    � alter default vendor passwords following installation of software
    So if I can store the password encrypted using a one way algorithm then hacker/user couldn't decrypt it and then access the database.
    I have feeling there is a way of configuring this in Oracle advanced Security, but just can't quite get it to work.
    Edited by: user5568473 on 20-May-2013 00:05

    So if I can store the password encrypted using a one way algorithm then hacker/user couldn't decrypt it and then access the database.... and neither can your application. Encryption is needed in this case. The decryption must be written into your application. I've written my own in some cases, but finding a library for your development language is a smarter solution.
    One alternative is using an Oracle wallet. It doesn't fit every circumstance and does have some maintenance headaches.
    You can set up a basic secure password store to encrypt and store the password for a given user@instance combination, and then connect to the database without passing a password. SQL*Net adds in the appropriate password from the wallet for when you connect.
    http://www.oracle.com/technetwork/database/security/twp-db-security-secure-ext-pwd-stor-133399.pdf
    Advanced Security Option also allows you to set up a Public Key Infrastructure connections (SSL encryption and/or authentication). It also uses a wallet to store the SSL certificates and credentials. I don't have personal experience on this approach.
    SSL and the wallet allow you to connect to the database similar to CONNECT/@net_service_name or sqlplus /@net_service_namehttp://docs.oracle.com/cd/B28359_01/network.111/b28530/asossl.htm#CIHCBIEG

  • Open LDAP Authenticator Configuration on WLSSP5

    I have problems in the open LDAP authenticator configuration on Weblogic Server with Service Pack 5. I have users on OpenLDAP Server that do not belong to any group. My LDIF file contents are as given below.
    dn: dc=my-domain,dc=com
    dc: my-domain
    objectClass: dcObject
    objectClass: organization
    o: MYABC, Inc
    dn: cn=Manager, dc=my-domain,dc=com
    userPassword:: c2VjcmV0
    objectClass: person
    sn: Manager
    cn: Manager
    dn: cn=myabcsystem, dc=my-domain,dc=com
    userPassword:: dmVuZGF2b3N5c3RlbQ==
    objectClass: person
    sn: myabcsystem
    cn: myabcsystem
    dn: cn=Philippe, dc=my-domain,dc=com
    userPassword:: UGhpbGlwcGU=
    objectClass: person
    sn: Philippe
    cn: Philippe
    dn: cn=mlrick, dc=my-domain,dc=com
    userPassword:: bWxyaWNr
    objectClass: person
    sn: mlrick
    cn: mlrick
    All these users appear in the Users tab after configuration on the console only if LDAP Server is up. While I select group tab, I get errors indicating BAD SEARCH Filter.
    Inspite of me not having any groups in the ldap as indicated in ldif contents.
    While I try to login t the application with this LDAP configuration, I do not get any errors. LDAP authentication is not happening with just the LDAP authenticator in place. Even if I stop the LDAP server, I do nto get any exceptions while trying ot login. The config params for the Open LADP are as given below
    <weblogic.security.providers.authentication.OpenLDAPAuthenticator
    AllGroupsFilter="objectclass=*"
    Credential="{3DES}rGCpYmhaIorI99BjZ2u6Fg=="
    GroupBaseDN="dc=my-domain,dc=com"
    GroupFromNameFilter="(cn=%u)"
    Name="Security:Name=MYABCAuthenticationOpenLDAPAuthenticator"
    Principal="cn=myabcsystem,dc=my-domain,dc=com"
    Realm="Security:Name=MYABCAuthentication"
    StaticGroupDNsfromMemberDNFilter=""
    StaticGroupNameAttribute="" StaticGroupObjectClass=""
    StaticMemberDNAttribute="" UserBaseDN="dc=my-domain, dc=com"/>
    ####<Mar 3, 2006 4:21:34 PM IST> <Debug> <SecurityDebug> <hemalatha> <myserver> <ExecuteThread: '49' for queue: 'default'> <<WLS Kernel>> <> <000000> <LDAP ATN LoginModule initialized>
    ####<Mar 3, 2006 4:21:34 PM IST> <Debug> <SecurityDebug> <hemalatha> <myserver> <ExecuteThread: '49' for queue: 'default'> <<WLS Kernel>> <> <000000> <LDAP Atn Login>
    ####<Mar 3, 2006 4:21:34 PM IST> <Debug> <SecurityDebug> <hemalatha> <myserver> <ExecuteThread: '49' for queue: 'default'> <<WLS Kernel>> <> <000000> <LDAP Atn Login username: bob>
    ####<Mar 3, 2006 4:21:34 PM IST> <Debug> <SecurityDebug> <hemalatha> <myserver> <ExecuteThread: '49' for queue: 'default'> <<WLS Kernel>> <> <000000> <getConnection return conn:LDAPConnection { ldapVersion:2 bindDN:""}>
    ####<Mar 3, 2006 4:21:34 PM IST> <Debug> <SecurityDebug> <hemalatha> <myserver> <ExecuteThread: '49' for queue: 'default'> <<WLS Kernel>> <> <000000> <authenticate user:bob>
    ####<Mar 3, 2006 4:21:34 PM IST> <Debug> <SecurityDebug> <hemalatha> <myserver> <ExecuteThread: '49' for queue: 'default'> <<WLS Kernel>> <> <000000> <getDNForUser search("ou=people,ou=MYABCAuthentication,dc=myabc", "(&(uid=bob)(objectclass=person))", base DN & below)>
    ####<Mar 3, 2006 4:21:34 PM IST> <Debug> <SecurityDebug> <hemalatha> <myserver> <ExecuteThread: '49' for queue: 'default'> <<WLS Kernel>> <> <000000> <returnConnection conn:LDAPConnection { ldapVersion:2 bindDN:""}>
    CAN ANYONE HELP ME IDENTIFY WHAT IS THE ISSUE. Why is the authentication not happening?

    Hi Amol,
    I've seen this happen at least two times in 11.1.1.1 installs. You can safely restart and then add the service back again. Suggest you reboot after you re-add the service back or cycle all the Hyperion services.
    I was not aware you could install the service with that command.
    I used the below command instead:
    sc create OpenLDAP-slapd start= auto binPath= "D:\Hyperion\...\slapd.exe service" DisplayName= "Hyperion Shared Services OpenLAP"
    Regards,
    -John

  • Where is the Network configuration file?

    I have a G4 Laptop that connects readily to the University Hotspot as well as to my home wifi router. However the College would prefer I use the admin network which uses the same wifi hardware but is secure, unlike the hotspot network. The system is predominantly populated with XP machines and the IT folks have attempted to get me on the admin network but authentication with WPA Personal, WPA Enterprise, WPA2 Personal, and WPA2 Enterprise do not work. When I try to use Airport Assist or diagnostics nothing helps. If I ask Airport to see the "Configuration" file it sends me to an area of Microsoft related files which is an enigma to me.I suspect something in the configuation file, wherever it is, is important and perhaps similar to what XP uses. Does anyone have any information about hooking a Leopard G4 into a windows based network?

    Raymond Zachary wrote:
    I have a G4 Laptop that connects readily to the University Hotspot as well as to my home wifi router. However the College would prefer I use the admin network which uses the same wifi hardware but is secure, unlike the hotspot network. The system is predominantly populated with XP machines and the IT folks have attempted to get me on the admin network but authentication with WPA Personal, WPA Enterprise, WPA2 Personal, and WPA2 Enterprise do not work. When I try to use Airport Assist or diagnostics nothing helps. If I ask Airport to see the "Configuration" file it sends me to an area of Microsoft related files which is an enigma to me.I suspect something in the configuation file, wherever it is, is important and perhaps similar to what XP uses. Does anyone have any information about hooking a Leopard G4 into a windows based network?
    You shouldn't have to deal with any such configuration files. Pull down the AirPort menu bar item. In the resulting list you should see the "admin network". Select that, then enter the supplied password. If that doesn't work, check and report exactly what happened.

  • Oblix_OBWebGate_AuthnAndAuthz: ..- Unable to read log configuration file.

    Hi All,
    I have a painful problem with Oracle 10g Webgate. I am using Oracle_Access_Manager10_1_4_3_0_linux64_APACHE22_WebGate to procted Apache resource. I have some problem in Custom Authentication plugin. which is not still resolve(https://forums.oracle.com/thread/2549716).   
    Now I have apply patch BP9 (Oracle_Access_Manager10_1_4_3_0_BP09_Patch_linux64_APACHE22_WebGate) for Webgate, Now I have a new issue, I am unable to get the logon page of OAM when I try to access my Apache resource.
    The Error Message in the browser is:
    Internal Server Error
    The server encountered an internal error or misconfiguration and was unable to complete your request.
    Please contact the server administrator, root@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error.
    More information about this error may be available in the server error log.
    Apache/2.2.3 (Oracle) Server at apache.tigerit.com Port 80
    In the error log file of  Apache I have found
    [Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
    [Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
    [Sun Jun 23 11:53:20 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
    [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
    [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
    [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.
    Can Anyone help me regarding this issue...
    Thanks
    Tamim Khan

    Hi Colin,
    Thanks for your help, You are right I have change the permission of /opt/netpoint/webgate/access/oblix/lib/libxmlengine.so.
    Now I am able to access the logon page of the access manager.
    But the problem as I mention in (https://forums.oracle.com/thread/2549716) my ObSSOCookie value is still loggedcontinue.
    My Authentication return (ExecutionStatus.SUCCESS) Successful from the Java Code , and I am unable to login in the application. The thing is I can't manipulate ObSSOCookie from Java code.
    I have apply Patch 12363955 to resolve this issue. But this patch is now to resolve this issue.
    Have you any idea how to resolve this issue.
    Thanks
    Tamim Khan

  • Core services configuration files in Operating System

    Hello everybody,
    I am trying to make a modification to
    CMC --> Servers --> Service Categories --> Core Services --> CentralManagementServer (Common settings)
    However, I cannot access it because of a connection issue (that has to do with the modification that I am trying to make). My question is whether I can access and modify the specific configuration files directly from OS and not through the web interface (CMC).
    My platform is IPS 4.1 sp2.
    Thanks in advance,
    Kanellos

    Hi Denis,
    Our server is hosted on windows OS. I followed your advice and restarted SIA using port 6401 instead of 6400. That way, I was able to login to CMC and perform the fix I wanted. After that I changed back SIA to use port 6400.
    Just to give you the full picture, my initial problem was with Data Services. I couldn't (and still cannot) connect via my laptop with DS client to my repository. The error message I am hitting on is:
    "Logon failed to specific system.
    Check system name, port number, user  name, password, authentication method and try again.
    Additional information: <Session: SDK failure>"
    I am pretty sure that system name, port number (6400), user name and password were correct, so I tried to look into other possibilities. While searching I came across one post that was mentioning that is not enough to have port 6400 open but DS will use one more port. If "Auto Assign" options is selected then the other port to be used is random, but you can uncheck it and force CMS/DS to use specific port. It sounded a valid possibility in my case because in the environment I am working at the moment all ports are closed except for the ones that I have requested to be open. However, I didn't want to make a request for opening another port before confirming that this would fix my problem, so I decided to use port 6400 that was already opened (and in use of course!). When I made the change, I got the following error:
    35101
    The root server reported an error Initialization Failure. (Reason: An unexpected problem (exception) happened.  Reason given: The port number specified for the server is already in use. (FWB 00092), The server has problems using TCP/IP. The port number you are using is probably already in use..).
    And this is when  I started this thread.
    If you have any suggestions/advice on how I can resolve my underlying issue, please share.
    Thanks and regards,
    Kanellos

  • ACS Server: External Authentication configuration error

    Hi ALL
    I have installed the ACS server and configure properly and it works fine.
    But whenever i restart the machine, following error message appears on the external database configuration wizard.
    External Authentication Configuration Error
    ACS has encountered a problem while attempting to process your request. This could be due to one of the following:
    An incorrect installation or configuration of the third-party DLLs required to support this External Database
    A corrupt ACS configuration
    So after i found this error, i just restart all the seven services and every things works fine.
    I always encountered the same error message after restarting the machine each time.
    Can any body recomend the solution or can help me to resolve the issue.
    Thanks

    Hi,
    Please try the following workaround.
    1. Go to Start > Programs > Administrative Tools > Services.
    2. Stop the following services in the following order.
    CSAuth
    CSDbSync
    CSLog
    CSMon
    CSRadius
    CSTacacs
    CSAdmin
    3. After stopping the following services, start them all again in the following order.
    CSAdmin
    CSAuth
    CSDbSync
    CSLog
    CSMon
    CSRadius
    CSTacacs
    Please let me know if this was able to help.
    If the above doesn't help, please reinstall the ACS as the dll files that are being used
    by the ACS have been corrupted, before uninstalling and reinstalling, do take a
    backup of ACS server database from System Configuration > ACS backup > Backup Now.
    Also make sure that the ACS is installed on the default drive.
    tnx
    somishra

  • Common PAM configuration files

    Hello,
    I need to configure a few Arch machines in order to allow LDAP authentication.
    Although two years ago it was proposed to redesign Arch PAM configuration files in order to use a few common modules, ike most other distros do, (FS#17188) nothing has been done yet, so configuring PAM to my purpose looks like being a pain (what the heck are gdm{,-autologin,-fingerprint,-password,-smartcard,-welcome}, anyway!?).
    Did anybody work on this?

    Hi
    Thanks for your quick responce.
    What we are trying to do is identify all users of SAP on an estate by scanning the workstations for womankind of common file that might be stored\cached on the clients.  If possible a file stored within the users profile but if outside of that it doesn't matter.  Either that or a registry entry or something.
    Many thanks

  • Imac is no longer able to open the Configuration file

    Hi ,
    I have an imac ( ilamp) 20' connected to ADSL, via Netopia Router which is connected to the Airport extreme connected to imac, for the PB Aluminum Tiger 10.4.5. we both can connect. PB can print via imac/printer.
    The imac is no longer able to open the Configuration file, when i enter the pswd which is correct, i get the message "The Airport Admin. Utility was unable to read the configuration of the selected base station an error occurred while reading the configuration "
    My Beau updated Airport to V5.7, this is the first time since the update I've tried to access the conf. file for the imac which i have done numerous times prior.
    I have a new base station Ip address 254.128.0 in Airport Utility Admin, on the imac which does not reflect my network settings anywhere, and is not what it use to be, i think, it was one value different than the PB.Base station IP. I do not know how it changed neither one of us changed it.
    I tried using the Airport Setup assistant (imac), I received this message:
    "Appropriate Airport hardware was bot found on this computer,if you recently
    Installed, an Airport card,please shut down your computer$ make sure the card is properly istalled."
    The imac does not have a card, nor do i think it needs one.
    I would like to be able to at least open the configuration file.
    Thank you for reading my post.
    Eme
    Power PC G4 (3.3) iMac♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger   Mac OS X (10.4.4)  

    Hi Kes, a star for the company !
    I made an error on my first post I have a Netopia modem, Airport router.
    And so it remains, i guess that there must be an easy answer somewhere
    that I am missing that I/we should read, some direction to that would be helpful, and I would be very appreciative.
    As I said the password had been set, and it is not an issue of that being forgotten, i wondered if it was changed back to "public" tried, not it.
    particular because everytime the imac wakes one of the folders on ( no one else in office just me and boyfriend and it is his work folder he has a copy on the PB.( the folder on desk top has been clicked on, the one with sensitve info, i have backed the folder up and secure trashed it, just in case some security issue hacking has taken place, thats closing the barn door after the fact.
    Good luck,w/ this Q.
    regards Eme
    Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger   Mac OS X (10.4.5)  

  • No dsn is present in the configuration file in the reporting services 2008

    HI i have found this error in the log file of my reporting services ,
    when i comes to the Configuration file in that
    my DSN path is empty no input code is there in that DSN tags
    <DSN>
    <DSN/>
    it shows the empty tags,
    and my Current Report Server Report Credentials are Windows,Service account credentails
    will it take the problem or what
    We have repair the BIDS setup also still not able to solve my issue.
    once this is  resolved now able to send the emails using subscriptions.
    pls infom abut this , i have sufferd this problem last 20 days.
    Please update the above query with high priority
    TanQ

    Hi Ychinnari,
    According to your description, you found error in log file of reporting services, when you come to rsreportserver.config file, the DSN tag is empty.
    DSN specify the database server that hosts the report server database connection string.  The report server database is created, this value will be encrypted and added to the configuration file. To solve the problem, we need to connect to either an
    existing report server database or create a new one for this instance. For detail information, please refer to the following steps:
    Start the Reporting Services Configuration Manager and connect to the report server instance for which you are creating the database.
    On the Database page, click Change Database.
    We can create a new report server database or select an existing database, then click Next.
    Connect to the instance of the Database Engine that you will use to create and host the report server database.
    Specify properties used to create the database.
    Specify the credentials used by the report server to connect to the report server database.
    Review the information on the Summary page to verify the settings are correct, and then click Next.
    Verify the connection by clicking a URL on the Report Server URL page or Report Manager URL page.
    For detail information about Configure a Report Server Database Connection, please refer to the following document:
    https://msdn.microsoft.com/en-us/library/ms159133.aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    Wendy Fu
    TechNet Community Support

  • Configure File Type Associations dosen't work for users

    Hi EB,
    Does anyones knows how to set the File Type Associations for users ? It works for me when i'm logged in as Admin but not as a user. When logged as user it always ask to configure the file associations when i open JDev and even with JDev open it does not set it. I tried to find an article about that but couldn't find any.
    I'm using :
    winXP SP3
    JDeveloper 11g TP4
    and i've sets all rights for autentified users on the folders and subfolders of JDeveloper.
    Thanks

    I tried going on tool>preferences>File Type .... and associate projets and source and applications files with JDev check marking "open with JDev"... it didn't worked as user... it's just not saving my settings while reopening it it's never saved... at least i've been able to associate it in my Admin account then i can go back in user account and select open file with in windows, choose JDev and check mark "always open that file with that program" only after that the association is saved in JDev... but still it open the Configuration file windows at startup with the ones i already opened with JDev checked... anyway that's not a big issue ... only that i can't save those settings by the JDev environement while logged in as a user...

  • Error reading configuration file

    I've setup the Adobe Access 4.0 trial license server and when I run the Validator.bat with -g -r on the Tomcat install dir \licenseserver I get an 'Error reading configuration file' message. Here is the log dump:
    [] 2012-12-20 22:46:32,176 INFO  [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]'
    [] 2012-12-20 22:46:32,582 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/sampletenant'
    com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading configuration file
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:110)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
              at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
              at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
              at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
              at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
              at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
    Caused by: org.apache.commons.configuration.ConfigurationException: Unable to load the configuration
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)
              ... 7 more
    Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; cvc-complex-type.2.4.b: The content of element 'KeyServer' is not complete. One of '{"http://licenseserver.flashaccess.adobe.com/tenant":File}' is expected.
              at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportErro r(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT ype(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType(Unk nown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unk nown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)
              ... 9 more
    I'm using a relative path to my .pfx file for both the transportServerCredential and licenseServerCredential in the flashaccess-tenant.xml and my password has been scrambled using the Scrambler.bat.
    Also, when I verify setup using http://<LicenseServer>:8080/flashaccessserver/flashaccess/license/v2 I get the message 'License server is setup correctly.'
    Any ideas of why the Validator.bat can't read the configuration file?

    I agree with you that if I can successfully playback content the license serve is setup successfully. Here is what I've tried and how I've set things up:
    I have my license server setup (its the Protected Streaming version).
    I'm using Adobe Media Server as my content/packaging server. I successfully served Vanilla PHLS sample streams to the sample Adobe Access player on iOS devices.
    I have configured the Adobe Media Server to point to the license server and certificates as per the documenation and this Adobe Dev article (http://www.adobe.com/devnet/adobe-media-server/articles/content-protection-using-phds-phls .html). Since I am using a trial version of Adobe Access my .der files are the same for transport and packaging.
    I am using the local key mode to remove one more variable (I have setup a remote key server as well).
    I have placed a copy of the 'vod-policy.pol' policy file from the reference license server resources directory in my Adobe Media Server 'creds' directory and used the relative path '..creds/vod-policy.pol' in the httpd.conf file.
    When I attempt to load the sample stream http://<mymediaserver>/hls-vod/sample2_1000kbps.f4v.m3u8 using the Adobe Access sample player on my iOS device I receive the following errors in the player:
    DRM error Major[3363] minor:[0] NSError:(null)]
    From my knowledge of working with the Adobe Access Objective C library to create a PhoneGap plugin it appears that a decrypted playlist is not being returned by the Adobe Media Server. Additionally, I can find no information in the Adobe Media Server or Adobe Access logs that pertain to my setup.
    I would love to have someone from Adobe speak to the problems I am having. I find the documentation to be hit and miss and most of my successful results during this proofing process have been from piecing together disparate pieces of information and trial and error. Information on using the Adobe Media Server with Adobe Access is limited to one Devnet article (above) and the help in Adobe Media Server that doesn't explain pathing to the license server or Java policy files in any detail.
    Colour me frustrated

  • Was advised to delete system configuration file from hard drive and now computer will not start - any help would be appreciated.

    Downloaded Yosemite and since then cannot connect to internet or bluetooth mouse - was advised to delete system configuration file from the hard drive and since then cannot start up computer. Any help would be appreciated - cheers.

    Boot the MBP with the OPTION+COMMAND+R keys down.  The result should be a display showing a revolving globe.  By following the instructions, you will be able to reinstall the original OSX.  Then you may reinstall Yosemite.
    A solid Internet connection will be required.
    Ciao.

  • How to create a configuration file for open ldap.

    hi,
    I have installed open ldap on my machine. Now I want to configure it to NetWeaver.
    For this, I started configuration through configtool utility of NetWeaver. While configuring, we need to select or upload configuration file. But now as it is open ldap we need to write our own config file.
    I tried it by selecting dataSourceConfiguration_ads_deep_readonly_db.xml  as a configuratio file. it shows successful test connection but the user which  I have created is not appearing in UME store.
    Does any body having solution for this?
    I am trying to solve this problem from two days. I really appriciate one who will sove this problem

    Well the configuration file you chose does not allow users created in NetWeaver to be created in the LDAP.  That's why it's a "readonly" configuration.  I would guess that you need a custom configuration file specifically for open ldap.
    This should help get you started on a custom configuration file:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/14d43f2dd44821e10000000a1550b0/frameset.htm
    Then again, if the only problem with the .XML file you chose is that you can't write to the LDAP, give the dataSourceConfiguration_ads_writeable_db.xml configuration file a shot.

  • How to generate an XML Configuration File for EBS Source Type

    Hi,
    We have installed SES, I want to integrate it to enable for searching repository contracts.
    In the sources I have selected oracle.apps.okc.repository.textsearch.server.RepHeaderSearchExpVO.
    For this source I need to specify the Configuration URL.
    Here I need to provide the path for configuration XML file. But before that I need to generate the XML Configuration file.
    Is there any steps on how we can create this XML file.
    like I would want to know how we can create the XML file and on which folder on the server should I be putting it
    Thanks

    Hi there,
    We are running into same issue and need the exact same information. Can someone help with this question on priority?
    Thanks,
    Darshan

Maybe you are looking for