Authentication failed!!!!help!help!help!!
I have same error:
I am setting the smtp authentication in OCSR2 to true, after that, when ever I sent mail thru the server, it need the smtp authentication. I thought I had been successfully configure the server. But later on, when I trying to send mail to the user in the OCSr2 server(from hotmail mail), the mail was reject due to the error"authentication failed".
It seem that the authentication setting not only affect the mail relaying but also incoming mail connection. Is this true??
pls help me!!!
The JavaMail FAQ has some tips on debugging such problems.
Similar Messages
-
Reader download error "certificate authentication failed"
I'm trying to download the latest version of Reader but keep coming up with the error message "certificate authentication failed".
Any help?Try downloading the offline installer from http://get.adobe.com/reader/enterprise/
-
My current softward is: Mac OS X Lion 10.7.5 (11G63)
When I attempt to use the Filezilla connection wizard I get the following message:
Connecting to probe.filezilla-project.org
Response: 220 FZ router and firewall tester ready
USER FileZilla
Response: 331 Give any password.
PASS 3.7.1.1
Response: 230 logged on.
Checking for correct external IP address
Retrieving external IP address from http://ip.filezilla-project.org/ip.php
Checking for correct external IP address
IP 27.0.19.56 ch-a-bj-fg
Response: 200 OK
PREP 52470
Response: 200 Using port 52470, data token 1871898076
PORT 27,0,19,56,204,246
Response: 200 PORT command successful
LIST
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent unexpected reply.
Connection closed
When I attempt to login Host/Username/Password myself I get the following message:
Status: Resolving address of amyhoney.com
Status: Connecting to 184.168.54.1:21...
Status: Connection established, waiting for welcome message...
Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response: 220-You are user number 12 of 500 allowed.
Response: 220-Local time is now 04:05. Server port: 21.
Response: 220-This is a private system - No anonymous login
Response: 220 You will be disconnected after 3 minutes of inactivity.
Command: USER 5475****
Response: 331 User 5475**** OK. Password required
Command: PASS ********************
Response: 530 Login authentication failed
Error: Critical error
Error: Could not connect to server
Now before anyone points out the obvious: my username and password are correct. I've already gone through changing them so I know they are.
Additionally, I've pretty much tried EVERYTHING I've read online, from messing with "terminal" (and subsequently the FTP and STFP options) to changing the sharing options and turning on file sharing/remote management as well as just turning off my Firewall completely.
Now I've used Filezilla before when I first published my site and everything worked fine. My site is published through Wordpress so most of my editing was done through simply logging into my "wp-login." I recently changed the theme and in order to change the header image in that theme I have to do it through my "wp-content" folder, which means I need to use Filezilla. I feel like a complete moron right now considering I've had my site for about a year and can't even doing something this simple.
I've read that the newer version of Lion/Mountain Lion don't support automatice FTP anymore, which (as I mentioned prior) I attempted to fix through Terminal. However, nothing I do seem to do works.
Can someone walk me through fixing this? And I do mean 'walk me through'. I'm not a tech-savvy nerd who knows all the lingo, I just know the basics so sorry if my ignorance offends you.
HELP!!First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.
-
Authentication Failed!? Can someone help please?
Hi everyone,
I'm in need of some real assistance. I have currently purchased and installed ARD 3.0 on my laptop. My girlfriend has just bought her first Mac computer - a new intel iMac. Wanting to help her remotely, I installed the client installer created by my ARD3 version. When I try to connect, it doesn't let me. It says "Authentication Failed". We even tried taking off the password to make it easier, but still nothing. I can connect by "Connect to Server" through the finder, but I just don't understand why it won't connect me through ARD. I've read a few forums about the intel problem, but I understood that problem is having ARD3 installed on the computer as in, "the master host" and not the client installer. Is that right?
Can someone tell me if I am supposed to install the whole program on the iMac I am trying to connect to or does it just have to be on my computer and everyone else gets the custom "Client Installer" I've created. In her preferences under Sharing, it doesn't show Access Privileges, where as it does on mine as I have it fully installed on mine. I am very confused and feeling like a total newbie. Any assistance would be greatly appreciated. Thank you.Same issue here. I have 25 nodes (mix of Pmacs 2x/4x) and am trying to get imaging going as we're replacing some of the 2x with 4x, Using NetRestore and a lot of help from local experts, I've got the imaging working, but even tho the new nodes are imaged from an existing one (and then renamed), I cannot connect to them with ARD 3.0 (Authentication Failed to [node]).
The nodes are set up to get IPs based on MAC addresses from a MacOSX Server running DHCP and this part works well - they're getting the right IP #s, but not connecting via ARD. They show up in the ARD panel with the correct IP number and ARD version #, but the DNS name is missing (should be 'Q2L1.local' and is blank.)
What kind of auth is being sought? Is it trying to get kerberos authentication via the Server? That service is on and appears to be working fine, altho I could imagine that since it's running off an imaged disk, there might be some kind of auth invalidation occuring.
However, in checking the Server Open Directory logs, I see:
Jul 20 2006 11:59:31 AUTH2: {0x446d07630c6cdd5e0000000f0000000f, hjm} DHX authentication failed, SASL error -13 (password incorrect).
Jul 20 2006 11:59:31 QUIT: {0x446d07630c6cdd5e0000000f0000000f, hjm} disconnected.
Jul 20 2006 11:59:32 RSAVALIDATE: success.
Jul 20 2006 11:59:32 AUTH2: {0x446d07630c6cdd5e0000000f0000000f, hjm} DHX authentication failed, SASL error -13 (password incorrect).
Jul 20 2006 11:59:32 QUIT: {0x446d07630c6cdd5e0000000f0000000f, hjm} disconnected.
I'm logged into the server as 'hjm' but I don't have an account on the target machine (nor the image source machine which works just fine).
The above errors suggest that it's a DHX key problem, but why should it involve 'hjm' and not the user logged in, or the user trying to log in?
Incidentally, resetting the passwd for the logged in user does not work.
***? (Why The Failure?)
Harry -
I have been updating my site over the last week, using Iweb SEO TOOL, but suddenly 2 days ago I can no longer update when i go to publish it says "invalid password "on Iweb Test. and on SEO Tool, Login Failed Login Authentication Failed, the password and all settings are correct.
I am 100% sure the all the setting are correct, as it has been working for the last 7 months and I have just been updating it, then suddenly it stopped, I have all the FTP settings wrote down, and even changed the passwords twice hoping that may work to no avail.Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again. -
I am having a very difficult time making a simple login program work
I am using Java SDK 1.4.2_02 on a Windows 2000 host, the DS is on the same host
My Directory Server is Sun One Directory Server 5.2
I am using the JAAS package, with a JndiLoginModule
When I use a bogus uid I get a �user not found� message so I know I am contacting the DS correctly
The Access log looks like this
[09/Dec/2003:13:09:52 -0600] conn=1606 op=0 msgId=1 - BIND dn="" method=128 version=3
[09/Dec/2003:13:09:52 -0600] conn=1606 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn=""
[09/Dec/2003:13:09:52 -0600] conn=1606 op=1 msgId=2 - SRCH base="ou=people,dc=auto-trol,dc=com" scope=0 filter="(objectClass=*)" attrs=ALL
[09/Dec/2003:13:09:52 -0600] conn=1606 op=1 msgId=2 - RESULT err=0 tag=101 nentries=1 etime=0
[09/Dec/2003:13:09:52 -0600] conn=1606 op=2 msgId=3 - SRCH base="ou=people,dc=auto-trol,dc=com" scope=1 filter="(uid=jpsb)" attrs=ALL
[09/Dec/2003:13:09:52 -0600] conn=1606 op=2 msgId=3 - RESULT err=0 tag=101 nentries=1 etime=0
[09/Dec/2003:13:09:52 -0600] conn=1606 op=3 msgId=4 - ABANDON targetop=NOTFOUND msgid=3
My config file looks like this
Sample
com.sun.security.auth.module.JndiLoginModule required debug=true
user.provider.url="ldap://localhost:4661/ou=People,dc=auto-trol,dc=com"
group.provider.url="ldap//localhost:4661/ou=Group,dc=auto-trol,dc=com";
The error I get is this:
[JndiLoginModule] user provider: ldap://localhost:4661/ou=People,dc=auto-trol,dc=com
[JndiLoginModule] group provider: ldap//localhost:4661/ou=Group,dc=auto-trol,dc=com
ldap username: jpsb
ldap password: jim
[JndiLoginModule] attemptAuthentication() failed
[JndiLoginModule] regular authentication failed
[JndiLoginModule]: aborted authentication failed
Authentication failed:
Login incorrect
A stack trace looks like this
javax.security.auth.login.FailedLoginException: Login incorrect
at com.sun.security.auth.module.JndiLoginModule.attemptAuthentication(JndiLoginModule.java:552)
at com.sun.security.auth.module.JndiLoginModule.login(JndiLoginModule.java:310)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:675)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:129)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:610)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokeModule(LoginContext.java:607)
at javax.security.auth.login.LoginContext.login(LoginContext.java:534)
at LoginJaas.main(LoginJaas.java:93)
It appears to me that there must be some kind password problem, I can login from the 5.2 console or switch user ids from the console so I know the user and Directory Server are OK.
Can anyone help? I�ve been pounding on this for a few days and it is getting frustrating.
Thanks in advance
JimHere it is along with some bat files to make and run. I can't understand why it does not work. It is mostly a slightly modified example from Sun. I'm using Sun code, a Sun Directory Server and a Sun's JndiLoginModule so why the damn thing does not work is a mystery. I have looked EVERYWHERE for a sample JAAS/LDAP Authenicate code and can't find a thing. Makes me think there isn't any and JAAS is not the way to go. I and going to try with a different DS maybe open LDP or active Directory and if that doesn't work I'll forget JAAS and use JNDI instead.
Any help would be greatly appreciated.
thanks in advance
jim
Start LoginJass.java
* @(#)LoginJaas.java
* Copyright 2001-2002 Sun Microsystems, Inc. All Rights Reserved.
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
* -Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* -Redistribution in binary form must reproduct the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* Neither the name of Sun Microsystems, Inc. or the names of
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
* This software is provided "AS IS," without a warranty of any
* kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY
* EXCLUDED. SUN AND ITS LICENSORS SHALL NOT BE LIABLE FOR ANY
* DAMAGES OR LIABILITIES SUFFERED BY LICENSEE AS A RESULT OF OR
* RELATING TO USE, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE OR
* ITS DERIVATIVES. IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE
* FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT,
* SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
* CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF
* THE USE OF OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* You acknowledge that Software is not designed, licensed or
* intended for use in the design, construction, operation or
* maintenance of any nuclear facility.
import javax.security.auth.Subject;
import javax.security.auth.callback.*;
import javax.security.auth.login.*;
import com.sun.security.auth.callback.TextCallbackHandler;
import java.security.PrivilegedAction;
* This LoginJaas application attempts to authenticate a user
* and reports whether or not the authentication was successful.
* If successful, it then sets up subsequent execution of
* code in the run method of the SampleAction class such that
* access control checks for security-sensitive operations will be
* based on the user running the code.
public class LoginJaas
private static Subject mySubject;
public static void main(String[] args)
// Obtain a LoginContext, needed for authentication. Tell it
// to use the LoginModule implementation specified by the
// entry named "JaasSample" in the JAAS login configuration
// file and to also use the specified CallbackHandler.
LoginContext lc = null;
try
lc = new LoginContext("Sample", new TextCallbackHandler());
catch (LoginException le)
System.err.println("le:Cannot create LoginContext. "
+ le.getMessage());
le.printStackTrace();
System.exit(-1);
catch (SecurityException se)
System.err.println("se:Cannot create LoginContext. "
+ se.getMessage());
se.printStackTrace();
System.exit(-1);
try
// attempt authentication
lc.login();
catch (LoginException le)
System.err.println("Authentication failed:");
System.err.println(" " + le.getMessage());
le.printStackTrace();
System.exit(-1);
System.out.println("Authentication succeeded!");
// now try to execute the SampleAction as the authenticated Subject
Subject mySubject = lc.getSubject();
PrivilegedAction action = new SampleAction();
Subject.doAsPrivileged(mySubject, action, null);
End LoginJass.java
Start MyCallbackHandler.java
import java.io.*;
import javax.security.auth.*;
import javax.security.auth.callback.*;
public class MyCallbackHandler implements CallbackHandler
public void handle(Callback callbacks[]) throws IOException, UnsupportedCallbackException
for(int i=0;i<callbacks.length;i++)
if(callbacks[i] instanceof NameCallback)
NameCallback nc = (NameCallback) callbacks[0];
System.err.print(nc.getPrompt());
System.err.flush();
String name = (new BufferedReader(new InputStreamReader(System.in))).readLine();
nc.setName(name);
else
throw(new UnsupportedCallbackException(callbacks,
"Callback handler not support"));
End MyCallbackHandler.java
Start Sample.java
* @(#)Sample.java 1.19 00/01/11
* Copyright 2000-01 Sun Microsystems, Inc. All rights reserved.
* Copyright 2000-01 Sun Microsystems, Inc. Tous droits reserves.
import java.io.*;
import java.util.*;
import java.security.Principal;
import javax.security.auth.*;
import javax.security.auth.callback.*;
import javax.security.auth.login.*;
import javax.security.auth.spi.*;
import com.sun.security.auth.*;
* <p> This Sample application attempts to authenticate a user
* and executes a SampleAction as that user.
* <p> If the user successfully authenticates itself,
* the username and number of Credentials is displayed.
* @version 1.19, 01/11/00
public class Sample {
* Attempt to authenticate the user.
* <p>
* @param args input arguments for this application. These are ignored.
public static void main(String[] args) {
// use the configured LoginModules for the "Sample" entry
LoginContext lc = null;
try {
lc = new LoginContext("Sample", new MyCallbackHandler());
} catch (LoginException le) {
le.printStackTrace();
System.exit(-1);
// the user has 3 attempts to authenticate successfully
int i;
for (i = 0; i < 3; i++) {
try {
// attempt authentication
lc.login();
// if we return with no exception, authentication succeeded
break;
} catch (AccountExpiredException aee) {
System.out.println("Your account has expired. " +
"Please notify your administrator.");
System.exit(-1);
} catch (CredentialExpiredException cee) {
System.out.println("Your credentials have expired.");
System.exit(-1);
} catch (FailedLoginException fle) {
System.out.println("Authentication Failed");
try {
Thread.currentThread().sleep(3000);
} catch (Exception e) {
// ignore
} catch (Exception e) {
System.out.println("Unexpected Exception - unable to continue");
e.printStackTrace();
System.exit(-1);
// did they fail three times?
if (i == 3) {
System.out.println("Sorry");
System.exit(-1);
// let's see what Principals we have
Iterator principalIterator = lc.getSubject().getPrincipals().iterator();
System.out.println("Authenticated user has the following Principals:");
while (principalIterator.hasNext()) {
Principal p = (Principal)principalIterator.next();
System.out.println("\t" + p.toString());
System.out.println("User has " +
lc.getSubject().getPublicCredentials().size() +
" Public Credential(s)");
// now try to execute the SampleAction as the authenticated Subject
Subject.doAs(lc.getSubject(), new SampleAction());
System.exit(0);
End Sample.java
Start SampleAction.java
* @(#)SampleAction.java 1.4 00/01/11
* Copyright 2000-01 Sun Microsystems, Inc. All rights reserved.
* Copyright 2000-01 Sun Microsystems, Inc. Tous droits reserves.
import java.io.File;
import java.security.PrivilegedAction;
* <p> This is a Sample PrivilegedAction implementation, designed to be
* used with the Sample application.
* @version 1.4, 01/11/00
public class SampleAction implements PrivilegedAction {
* <p> This Sample PrivilegedAction performs the following operations:
* <ul>
* <li> Access the System property, <i>java.home</i>
* <li> Access the System property, <i>user.home</i>
* <li> Access the file, <i>foo.txt</i>
* </ul>
* @return <code>null</code> in all cases.
* @exception SecurityException if the caller does not have permission
* to perform the operations listed above.
public Object run() {
System.out.println("\nYour java.home property: "
+System.getProperty("java.home"));
System.out.println("\nYour user.home property: "
+System.getProperty("user.home"));
File f = new File("foo.txt");
System.out.print("\nfoo.txt does ");
if (!f.exists())
System.out.print("not ");
System.out.println("exist in the current working directory.");
return null;
End SampleAction.java
Start princible/SamplePrincipal.java
package principal;
* @(#)SamplePrincipal.java 1.4 00/01/11
* Copyright 2000-01 Sun Microsystems, Inc. All rights reserved.
* Copyright 2000-01 Sun Microsystems, Inc. Tous droits reserves.
import java.security.Principal;
* <p> This class implements the <code>Principal</code> interface
* and represents a Sample user.
* <p> Principals such as this <code>SamplePrincipal</code>
* may be associated with a particular <code>Subject</code>
* to augment that <code>Subject</code> with an additional
* identity. Refer to the <code>Subject</code> class for more information
* on how to achieve this. Authorization decisions can then be based upon
* the Principals associated with a <code>Subject</code>.
* @version 1.4, 01/11/00
* @see java.security.Principal
* @see javax.security.auth.Subject
public class SamplePrincipal implements Principal, java.io.Serializable {
* @serial
private String name;
* Create a SamplePrincipal with a Sample username.
* <p>
* @param name the Sample username for this user.
* @exception NullPointerException if the <code>name</code>
* is <code>null</code>.
public SamplePrincipal(String name) {
if (name == null)
throw new NullPointerException("illegal null input");
this.name = name;
* Return the Sample username for this <code>SamplePrincipal</code>.
* <p>
* @return the Sample username for this <code>SamplePrincipal</code>
public String getName() {
return name;
* Return a string representation of this <code>SamplePrincipal</code>.
* <p>
* @return a string representation of this <code>SamplePrincipal</code>.
public String toString() {
return("SamplePrincipal: " + name);
* Compares the specified Object with this <code>SamplePrincipal</code>
* for equality. Returns true if the given object is also a
* <code>SamplePrincipal</code> and the two SamplePrincipals
* have the same username.
* <p>
* @param o Object to be compared for equality with this
* <code>SamplePrincipal</code>.
* @return true if the specified Object is equal equal to this
* <code>SamplePrincipal</code>.
public boolean equals(Object o) {
if (o == null)
return false;
if (this == o)
return true;
if (!(o instanceof SamplePrincipal))
return false;
SamplePrincipal that = (SamplePrincipal)o;
if (this.getName().equals(that.getName()))
return true;
return false;
* Return a hash code for this <code>SamplePrincipal</code>.
* <p>
* @return a hash code for this <code>SamplePrincipal</code>.
public int hashCode() {
return name.hashCode();
End princible/SamplePrincipal.java
Start ample_jaas.config
/** Login Configuration for the JAAS Sample Application **/
Sample
//SampleLoginModule required debug=true;
com.sun.security.auth.module.JndiLoginModule required debug=true
user.provider.url="ldap://localhost:4661/ou=People,dc=testing,dc=com"
group.provider.url="ldap//localhost:4661/ou=Group,dc=testing,dc=com";
End Sample_jaas.config
Start sample.policy
/** Java 2 Access Control Policy for the JAAS Sample Application **/
/** Code-Based Access Control Policy for LoginJaas **/
grant codebase "file:./sample.jar
permission javax.security.auth.AuthPermission
"createLoginContext.JaasSample";
permission javax.security.auth.AuthPermission "doAsPrivileged";
permission java.security.AllPermission; //darf alles
/** User-Based Access Control Policy for the LoginAction class
** instantiated by LoginJaas
grant codebase "file:./SampleAction.jar", Principal principal.SamplePrincipal "jimshi"
permission java.util.PropertyPermission "java.home", "read";
permission java.util.PropertyPermission "user.home", "read";
permission java.io.FilePermission "foo.txt", "read";
End sample.policy
Start makelogin.bat
REM
javac LoginJaas.java principal/SamplePrincipal.java
jar -cvf LoginJaas.jar LoginJaas.class principal/SamplePrincipal.java
REM
javac SampleAction.java
jar -cvf SampleAction.jar SampleAction.class
REM
REM javac SampleLoginModule.java
REM jar -cvf sample_module.jar SampleLoginModule.class
REM
javac Sample.java
REM jar -cvf sample.jar MyCallbackHandler.class Sample.class
javac com/sun/security/auth/module/*.java
End makelogin.bat
Start run.bat
REM java -classpath ./;SampleAction.jar;LoginJaas.jar -Djava.security.manager -Djava.security.policy=sample.policy -Djava.security.auth.login.config=sample_jaas.conf LoginJaas
java -classpath ./;SampleAction.jar;LoginJaas.jar -Djava.security.auth.login.config==D:\STUFF\LDAP\loginJim\sample_jaas.config LoginJaas
End run.bat -
Help: Form Based Authentication Failed
Can someone from bea help me with this? We're using servlet's j_security_check to authenticate the user and from time to time, this message
"Form based authentication failed. One of the following reasons could cause it:
HTTP sessions are disabled.
An old session ID was stored in the browser"
pops out. How can we prevent this from happening?
thanks in advanced...
Jerson
Please see the recent thread in the Security section dealing with the same
message. (Search on "Form based authentication failed".) There appears to
be at least one bug in WL that causes this, although I wouldn't rule out a
config issue.
At any rate, the error message printed out to the console (and log) is
stupid. Chances are your problem has nothing to do with either an old
session ID or sessions being disabled, both of which WebLogic should be able
to tell you for sure if they were indeed the problem.
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
+1.617.623.5782
WebLogic Consulting Available
"Jerson Chua" <[email protected]> wrote in message
news:3a30499c$[email protected]..
>
> Can someone from bea help me with this? We're using servlet's
j_security_check to authenticate the user and from time to time, this
message
> "Form based authentication failed. One of the following reasons could
cause it:
> HTTP sessions are disabled.
> An old session ID was stored in the browser"
> pops out. How can we prevent this from happening?
>
> thanks in advanced...
> Jerson
>
-
Reboot errors authentication mDNSResponder SecKeychainFindGenericPas. HELP?
Reboot errors authentication mDNSResponder SecKeychainFindGenericPassword. HELP?
I first have to explain that several months ago after an apple update, I always have a dialog which ask for my 'system/keychain' password... something like that which I don't have, it's not my login password.
I finally delete the annoying ~"system keychain" sorry don't remember the exact name which was always asking a password on my PB and PM and reboot. Now no more password is asked but it seems some problems are appearing any idea how to repear all those strange errors???
sudo ? recreate the keychain ???
My system is pure, no hack, anti-virus, nothing. Repairing keychain does not help, repairing disk authorization neither, tools from versiontracker neither.
I have a snow airbase.
Thanks in advance !
Mar 2 10:59:55 Ordinateur-de-SM shutdown: reboot by SM:
Mar 2 10:59:57 Ordinateur-de-SM SystemStarter[4296]: authentication service (4304) did not complete successfully
Mar 2 10:59:59 Ordinateur-de-SM SystemStarter[4296]: The following StartupItems failed to properly start:
Mar 2 10:59:59 Ordinateur-de-SM SystemStarter[4296]: /System/Library/StartupItems/AuthServer
Mar 2 10:59:59 Ordinateur-de-SM SystemStarter[4296]: - execution of Startup script failed
Mar 2 11:01:01 localhost diskarbitrationd[39]: disk0s3 hfs 662F4EBC-D3F6-3C04-AF5E-B4A13B6DB2E2 HD-SM /
Mar 2 11:01:03 localhost mDNSResponder: Couldn't read user-specified Computer Name; using default “Macintosh-000393D1E6CC” instead
Mar 2 11:01:03 localhost mDNSResponder: Couldn't read user-specified local hostname; using default “Macintosh-000393D1E6CC.local” instead
Mar 2 11:01:04 localhost mDNSResponder: Adding browse domain local.
Mar 2 11:01:04 localhost lookupd[65]: lookupd (version 369.2) starting - Thu Mar 2 11:01:04 2006
Mar 2 11:01:04 localhost lookupd[65]: lookupd (version 369.2) starting - Thu Mar 2 11:01:04 2006
Mar 2 11:01:04 localhost kernel[0]: NVDA,Display-B: vram [94000000:08000000]
Mar 2 11:01:04 localhost kernel[0]: NVDA,Display-A: vram [00000000:01000000]
Mar 2 11:01:06 localhost DirectoryService[57]: Launched version 2.1 (v352.1)
Mar 2 11:01:06 Ordinateur-de-SM configd[37]: setting hostname to "Ordinateur-de-SM.local"
Mar 2 11:01:09 Ordinateur-de-SM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Mar 2 11:01:10 Ordinateur-de-SM kernel[0]: AirPort: Link Active: "ViaAirPort" - 0030661dd724 - chan 2
HERE TOO
Mar 2 11:01:10 Ordinateur-de-SM configd[37]: SecKeychainFindGenericPassword err= -25308 ( =0xffff9d24, secErrStr=User interaction is not allowed. ) (current= ViaAirPort)
Mar 2 11:01:11 Ordinateur-de-SM loginwindow[113]: Login Window Started Security Agent
Mar 2 11:01:13 Ordinateur-de-SM configd[37]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Mar 2 11:01:13 Ordinateur-de-SM configd[37]: posting notification com.apple.system.config.network_change
Mar 2 11:01:13 Ordinateur-de-SM lookupd[136]: lookupd (version 369.2) starting - Thu Mar 2 11:01:13 2006
Mar 2 11:01:17 Ordinateur-de-SM configd[37]: target=enable-network: disabled
PowerMac G4 Dual 1.25Ghz Mac OS X (10.4.5) PowerBook G4 500Mhzcan you be more clear when this happens, is it on startup? can you start up successfuly? have you safe booted?
-
Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!
... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that. -
I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes
Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H. -
Hi all,
I am trying to install Xcode 3.2.5 & Xcode 4.2 in iMac (Mac OS X 10.6.8) , I am getting error message as "Installation Failed". somebody can help me. Thanks in advance.I too have the same error while installing xcode 4.2 in Mac os x 10.6.8.
Can any one solve this issue. -
All my photos in the iphoto have disappeared, not sure if this related to any iphoto upgrade or other issue, tried to find the photos through the finder (JPG or photo) but failed, can you help me to get back my photos please?
Help us to help you: There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key ) -
I try to sync my itunes with my iphon 4s 16gb but a message says that the sync fails can anyone help me?
The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.
-
Nokia N86 8MP software update failed.Any1 can help...
I just bought Nokia N86 8MP,my phone cant update to latest firmware version.It say software update failed, for optimum connectivity,your USB cable should be connected directly to the pc,and not via USB hub,USB keyboard orl aptop docking station.My USB cable is fine and ok.I closed my antivirus and turn off the firewall,but it still failed.I also uninstall the Nokia Pc suite and software updater, and download the latest version from nokia.com.my but it still failed.Any1 can help me?I am using Window XP service pack 2.
Yes!
http://europe.nokia.com/get-support-and-software/download-software/device-software-update/feedback
Help I'm trapped in a sig factory. -
HT4623 Itunes says I don't have permission to download IOS7 following a failed attempt? Help?!
Itunes says I don't have permission to download IOS7 following a failed attempt? Help?!
The servers are getting slammed. Bunch of people trying to download at the same time.
Give it time, keep trying, should eventually work.
Maybe you are looking for
-
After installing Maverick on my 2011 MacBookPro I can no longer highlight multiple emails in the same manner. To clean out my Inbox I highlighted a message, held my mouse down & dragged my cursor down through all the messages I wanted to delete (or
-
I have created a play list i want burnt. I select all ones i want burnt onto a CD-R tal amount less than disk size About 680mb. Seems burn ok then at end of it it says something like "Autoplay Error -50" some music appears be on it and plays little b
-
Live Messenger conflicting with new update, no access to Flash Player - Vista
Ok, first of all I'm not an expert at all with computers but usually figure things out on my own, but this is an issue I cannot figure out. Just yesterday, I downloaded I think not 100% sure, Flash Player 10.1 since I was unable to play videos on you
-
HT1766 I have iMac version 10.6.8 with "mobile me" in the system preference, no iCloud vignet.
Older iMac - version 10.6.8 with no iCloud symbol in system preference. I have also a iPhone 5 iOS 7.1.1 up to date. When I log into iCloud the old address book is in there. I cannot delete this in total. Question 1: How do I delete the whole addres
-
Hi my mom recently bought me an iphone 5s in america for my christmas present. She bought only the phone with no plan attached to it because it was $500. I live in ireland and i was wondering would it work here and if not how do i get it to work ? Sh