Authentication/Synchr. examples with Oracle DB source?
Hi,
We want to develop our own synchr./auth. service accessing tables in an Oracle DB and could not figure out yet how to specify the connection. Does anybody has examples/information how to do it? I've already looked at the EDK documentation but I've seen no specific examples.
You would create SCI pages for SynchProvider, and then use those values in ISynchProvider.Initialize
Go to the samples & look under Crawler_Database_VB. The code is in vb, but the idea is the same.
If you are interested, I can also give you a java example.
Similar Messages
-
CrystalReports error in XI 3.1 with Oracle Data Source
Having trouble running Crystal Reports with Oracle data source off XI 3.1 SP3. Reports hang through CMC or InfoView. Have no trouble on identical environment (presumably) with the same reports. Basically this happened after migration.
Report can be run on designer on the server box (suggesting the connection is good) however once uploaded to CMS, it hangs with error. This is not about an specific report only reports with Oracle Data source (Oracle client already installed and connection established)
Any comments appreciated.Thank you for your reply.
Seems like a re-boot resolved the problem.
Edited by: Amir Eskandari on Feb 10, 2011 3:57 PM -
Powerpivot Data Refresh Not working with Oracle Data Source in sharePoint 2013
I am using SQL Server 2012 PowerPivot for Excel 2010. Getting the following error in SharePoint 2013 environment, when using Oracle data source within a workbook -
EXCEPTION: Microsoft.AnalysisServices.SPAddin.DataRefreshException: Engine error during processing of OLE DB or ODBC error: The specified module could not be found..:
<Site\PPIV workbook>---> Microsoft.AnalysisServices.SPAddin.DataRefreshException: OLE DB or ODBC error:
The specified module could not be found..
at Microsoft.AnalysisServices.SPAddin.DataRefresh.ASEngineInstance.ProcessDataSource(String server, String databaseName, String datasourceName, SecureStoreCredentialsWrapper
runAsCredentials, SecureStoreCredentialsWrapper specificConfigurationCredentials, DataRefreshService dataRefreshService, String fileUrlForTracing) -
-- End of inner exception stack trace ---
at Microsoft.AnalysisServices.SPAddin.DataRefresh.ASEngineInstance.ProcessDataSource(String server, String databaseName, String datasourceName, SecureStoreCredentialsWrapper
runAsCredentials, SecureStoreCredentialsWrapper specificConfigurationCredentials, DataRefreshService dataRefreshService, String fileUrlForTracing)
at Microsoft.AnalysisServices.SPAddin.DataRefresh.DataRefreshService.ProcessingJob(Object parameters)
I created a simple Excel 2013 PPIV workbook with an oracle data source and uploaded that to SharePoint 2013, but no change in the results - still getting the above error.
What is this error? We have installed Oracle client (64-bit, since we use 64-bit Excel and Sp is also 64-bit) on SSAS PPIV Server and SharePoint Content DB Server. Do we need
to install it anywhere else?
Thanks,
SonalHi Sonal,
To use PowerPivot for SharePoint on SharePoint 2013, it is required to install PowerPivot for SharePoint with the Slipstream version of SQL Server 2012 SP1. If you install SQL Server 2012 and then use the upgrade version of SQL Server 2012 SP1 to upgrade,
the environment will not support SharePoint 2013.
I would suggest you refer to the following articles:
Install SQL Server BI Features with SharePoint 2013 (SQL Server 2012 SP1):
http://technet.microsoft.com/en-us/library/jj218795.aspx
Upgrade SQL Server BI Features to SQL Server 2012 SP1:
http://technet.microsoft.com/en-us/library/jj870987.aspx
Regards,
Elvis Long
TechNet Community Support -
Performance issue with Oracle data source
Hi all,
I've a rather strange problem that I'm stuck on need some assistance on.
I have a rules file which drags data in via an SQL data source thats an Oracle server. If I cut/paste the 3 sections of "select" "from" and "where" into SQL-Developer and run the query, it takes less than 1 second to complete. When I run the "load data" with this rule file or even use the "Retrieve" with the rules file edit, it takes up to an hour to complete/retrieve the data.
The table in question being used has millions of rows and I'm using one of the indexed fields to retrieve the data. It's as if the Essbase/Rule file is ognoring the index, or I have a config issue with the ODBC settings on the server that is causing the problem.
ODBC.INI file entry for the Oracle server as follows (changed any sensitive info to xxx or 999).
[XXX]
Driver=/opt/data01/hyperion/common/ODBC-64/Merant/5.2/lib/ARora22.so
Description=DataDirect 5.2 Oracle Wire Protocol
AlternateServers=
ApplicationUsingThreads=1
ArraySize=60000
CachedCursorLimit=32
CachedDescLimit=0
CatalogIncludesSynonyms=1
CatalogOptions=0
ConnectionRetryCount=0
ConnectionRetryDelay=3
DefaultLongDataBuffLen=1024
DescribeAtPrepare=0
EnableDescribeParam=0
EnableNcharSupport=0
EnableScrollableCursors=1
EnableStaticCursorsForLongData=0
EnableTimestampWithTimeZone=0
HostName=999.999.999.999
LoadBalancing=0
LocalTimeZoneOffset=
LockTimeOut=-1
LogonID=xxx
Password=xxx
PortNumber=1521
ProcedureRetResults=0
ReportCodePageConversionErrors=0
ServiceType=0
ServiceName=xxx
SID=
TimeEscapeMapping=0
UseCurrentSchema=1
Can anyone please advise on this lack of performance.
Thanks in advance
BagpussOne other thing that I've seen is that if your Oracle data source and Essbase server are in different geographic locations, you can get some delay when it retrieves data over the WAN. I guess there is some handshaking going on when passing the data from Oracle to Essbase (either by record or groups of records) that is slowed WAY down over the WAN.
Our solution to this was remove teh query out of the load rule, run it via SQL+ on a command line at the geographic location where the Oracle database is, then ftp the resulting file to where the Essbase server is.
With upwards of 6 million records being retrieved, it took around 4 hours in the load rule, but running the query via command line took 10 minutes, then the ftp took less than 5. -
Hi,
I am new to Oracle Coherence. I was looking for examples implementing Oracle Coherence step by step so as to get a basic understanding using JDeveloper but most of the examples available are using Oracle Service Bus and Eclipse.
Could anyone please help me in providing link with examples using Oracle Coherence with Oracle SOA suite 11.1.1.4.0 and JDeveloper.
Thanks for the needful.
Cheers,
VarunHi Varun,
Please find the answers to your questions below:
1) Could you please let me know how to use this system property -Dtangosol.coherence.override in my application so that I can coordinate between the cluster used by my application and the one started for using Coherence Node.
You need to specify this property in the Java Options of your server or cache node startup script.
2) I was trying to understand how to use this tangosol-coherence-override.xml but the document is pretty confusing. I am not able to understand that whether I am suppose to use it at server level or at application level.
I would suggest extract the coherence.jar and you it would be important for you to have a look at the tangosol-coherence.xml and tangosol-coherence-override.xml. This file is used to override any of the properties specified in tangosol-coherence.xml for your cluster configuration for example, clustername, multicast ip and port or WKA for unicast, logging and so on.
3) Another point is how to coordinate among tangosol-coherence-override.xml, coherence-cache-config.xml and -Dtangosol.coherence.override system property from my application
Ideally you should specify in the java options of your application startup but you can also sepcify using System.setProperty("property", "value") in you code for specifying the various properties
4) How to use the cache updating mechanisms from an application?
I am not clear what do you mean by cache updating mechanisms? If you mean how you can update the cache from application then you can use simple Put, Entry Processor and so on. Refer NamedCache APIs to start with for operations but there many other ways to update the cache from within application or otherwise
Hope this helps!
Cheers,
NJ -
Unable to boot bankapp servers with Oracle 8.1.7 in windows2000
Hello,I tried to run bankapp examples with oracle 8.1.7 in windows2000. But when
I booted the servers using tmboot, there are some errors.(1)I used the following
RM entries:Oracle_XA;xaosw;D:\Oracle\Ora81\precomp\lib\msvc\oraSQL8.lib D:\Oracle\Ora81\precomp\lib\msvc\oraSQX8.lib
D:\Oracle\Ora81\RDBMS\xa\ORAXA8.lib (2)The OPENINFO string in the ubbshm file
is:DEFAULT:TMSNAME=TMS_ORA TMSCOUNT=2 LMID=SITE1
BANKB1 GRPNO=1 OPENINFO="Oracle_XA:Oracle_XA+Acc=P/scott/tiger+SesTm=100+LogDir=.+MaxCur=5"(3)the
follow is the error message when I booted the servers:
.. 174841.GLOBALDB!BALC.852.2572.0: 07-26-2001: Tuxedo Version 8.0 32-bit Windows.
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:262: INFO: Standard main starting
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:466: ERROR: tpopen TPERMERR xa_open
returned XAER_RMERR
174841.GLOBALDB!BALC.852.2572.0: tpsvrinit: failed to open database due to
174841.GLOBALDB!BALC.852.2572.0: tpopen failed, tperrno: 16
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
174841.GLOBALDB!tmboot.480.548.-2: CMDTUX_CAT:825: ERROR: Process BALC at SITE1
failed with /T tperrno (TPERMERR - resource manager error) ...
Can anyone help? Thanks a lot!
Best Regards
LilyI found the answer myself in an earlier post.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by The Oracle Reports Team:
Reports 6i will connect to Oracle8i, however you need to connect over Net8 - i.e. on the database side, you need to set up the TNS listener to accept connections, and on the Reports side (which, incidentally, needs to be installed in a separate Oracle_home) you need to configure the tnsnames.ora file to connect to the 'remote' database (since it is in a different oracle_home, to all intents and purposes it may as well be on another machine - it's all considered 'remote').
Regards
The Oracle Reports Team http://technet.oracle.com <HR></BLOCKQUOTE>
null -
Please Help: A Problem With Oracle-Provided 'Working' Example
A Problem With Oracle-Provided 'Working' Example Using htp.formcheckbox
I followed the simple steps in the Oracle-provided example:
Doc ID: Note:116534.1
Subject: How to use checkbox in webdb for bulk update using webdb report
However, when I select a checkbox and click on the Update button, I get a "ORA-01036: illegal variable name/number" error. Please advise. This was a very promising feature.
Fred
Below are step-by-step instructions provided by Oracle to create this "working" example:
How to use a checkbox in WEBDB 2.2 report for bulk update.
PURPOSE
This article shows how checkbox can used placed on WEBDB report
and how to use it.
SCOPE & APPLICATION
The following example to guide through the steps to create a working
example of this.
In this example, the checkbox is used to select the records. On clicking
the update button, the pl/sql procedure is called which will update col1 to
the string 'OK'.
After the update is done, the PL/SQL procedure calls the report again.
Since the report only select records where col1 is null, the updated
records will not be displayed when the report is called again.
Step 1 - Create Table
From Sqlplus, log in as scott/tiger and execute the following:
drop table chkbox_example;
create table chkbox_example
(id varchar2(10) not null,
comments varchar2(20),
col1 varchar2(10));
Step 2 - Insert Test Data
From Sqlplus, still logged in as scott/tiger , execute the following:
declare
l_i number;
begin
for l_i in 1..50 loop
insert into chkbox_example values (l_i, 'Comments ' || l_i , NULL);
end loop;
commit;
end;
Step 3 -Create SQL Query based WEBDB report
Logon to a WEBDB site which has access to the database the above tables are created.
Create a SQL based Report.
Name the report :RPT_CHKBOX
The select statement for the report is :
select c.id, c.comments, c.col1,
htf.formcheckbox('p_qty',c.id) Tick
from SCOTT.chkbox_example c
where c.col1 is null
In Advanced PL/SQL, (REPORT, Before displaying the form), put the following code
htp.formOpen('scott.chkbox_process');
htp.formsubmit('p_request','Update');
htp.br;
htp.br;
Step 4 - Create a stored procedure in the database
Log on to the database as scott/tiger and execute the following to create the
procedure.
Note: Replace WEBDB to the appropriate webdb user for your installation.
In my database, I had installed webdb using WEBDB username, hence user webdb owns
the packages.
create or replace procedure chkbox_process
( p_request in varchar2 default null,
p_qty in wwv_utl_api_types.vc_arr ,
p_arg_names in wwv_utl_api_types.vc_arr ,
p_arg_values in wwv_utl_api_types.vc_arr
is
i number;
begin
for i in 1..p_qty.count loop
if p_qty(i) is not null then
begin
update chkbox_example
set col1 = 'OK'
where chkbox_example.id = p_qty(i);
end;
end if;
end loop;
commit;
/* To Call Report again after updating */
SCOTT.RPT_CHKBOX.show
(p_request=>'Run Report',
p_arg_names=>webdb.wwv_standard_util.string_to_table2(' '),
p_arg_values=>webdb.wwv_standard_util.string_to_table2(' '));
end;
Summary
There are essentially 2 main modules, The WEBDB report and the pl/sql procedure (chkbox_process)
A button is created via the advanced pl/sql coding which shows on top of the report. (The
button cannot be placed at the bottom of the report due to the way WEBDB creates the procedure
internally)
When any button is clicked on the report, it calls the pl/sql procedure chkbox_process.
The procedure is called , WEBDB always passes the parameters p_request,p_arg_names and o_arg_values.
p_qty is another parameter that we are passing additionally, This comes from the checkbox created
using the htf.formcheckbox in the report select statement.
The pl/sql procedure calls the report again after processing. This is done to
show how to call the report.
Restrictions:
-The Next and Prev buttons on the report will not work.
So it is important that the report can fit in 1 page only.
(This may mean that you will not select(not ticked) 'Paginate' under
'Display Option' in the WEBDB report. If you do this,
then in Step 4, remove p_arg_names and p_arg_values as input parameters
to the chkbox_process)If your not so sure you can use the instanceof
insurance,
Object o = evt.getSource();
if (o instanceof Button) {
Button source = (Button) o;
I haven't thoroughly read the thread, but I use something like this:if (evt.getSource() == someObjRef) {
// do that voodoo
]I haven't looked into why you'd be creating a new reference... -
Source(oracle 11g) with oracle 8i using db link with full table scan
Hi,
I'm using oracle 8i version and i'm facing some issue while using DBlinks.
SourceDB1 I'm using oracle 8i(Source)
select * from tab1
tabl where id in
(select id from stab1@SourceDB1 where updt_seq_num > 167720 and work_grp_id in (2900,2901))
For this, I could able to retrive the data.
but, today we have migrated one of our source from oracle 8i to oracle 11G
when I'm executing
select * from tab2
tabl where id in
(select id from stab2@SourceDB2 where updt_seq_num > 167720 and work_grp_id in (2900,2901))
we couldn't able to retrive data as it's scaning full table scan.
when oracle 8i source it's scanning using INDEX scan but if the source oracle 11 h it's scanning full table scan.
Could you please advise how to resolve this issue for source oracle 11i ?
Please let us know, if you need any information.Blocks that are read via full table scans are stored in the buffer cache, but putting them at the MRU end ensures that they don't push the rest of the useful blocks out of the buffer cache. In your example, if you're full scanning a 2 GB table (T) with a 500 MB buffer cache, the first block that is read from T is put at the MRU end of the buffer cache, displacing the previous block that was at the MRU end of the cache. The next block that is read from T is also put at the MRU end of the buffer cache, displacing the previous block that was at the MRU end of the cache, so block #2 from T displaces block #1 from T. So, you're reading 2 GB of data, but you're constantly purging the older blocks, so you're only really using that last block of the buffer cache.
Justin -
Data level Security with Oracle Apps as Source
Hi all
I am implementing Data level Security with Apps as Source(OLTP) on Single Sign On.(Oracle has provided the Vanila rpd & we are working on that)
I need to Filter data based on Business Group, Users are created in Apps and they are registered with some Responsibilities.
(for eg, OBI User CHINA is a Responsibility; Now he will get only Business Group ID for China)
I have created Groups in rpd with same name as the responsibility in Apps.
I have created Initialization Blocks from which I m getting only 1 business group ID for every :USER.(I tried the code in TOAD & I m getting the correct BG ID)
I have created Group in WEB with the same name as the Group name in rpd.
If I say show all Users and Groups in WEB, I m getting the APPS Users.
I hv Reloaded the server metadata files and restarted the BI Server/WEB Server also...
But in the Report, I m getting all the Business Group Ids,
Plz advice if I m doing something wrong.
ThanQ
AnandYou need to be creating your "business groups" as a group in the RPD, init blocks to retrieve the user business group at login. Filters in the Logical table sources to restrict data to relevant business groups only.
Presentation 'Web Cat' groups with the same name as the RPD groups so a user inherits membership automatically.
I'd suggest sourcing a vanilla OBIA rpd to see how it is implemented out of the box. -
Pls give me example of Java Servlet with Oracle
Hi Guys,
I am new to Database connectivity of JAVA Servlet with Oracle.
So can you give me one complete example of connecting Java Servlet with Oracle 9i database.
[ i mean Select statement, Insert statement..]
I have tomcat server which comes built-in with NetBeans IDE.
I need this because, i always come accross messages saying that " you need to change classpath this way " , or " you need to write connection this way "....
So to avoid all this wrong things..i need your help.
You guys can reply me on [email protected]
Thanks & Appreciate..
Dal HitI got succeeded!
I changed the three point:
* add 'package hoo;' in HelloBean.java
* add '<%@ page import="my.HelloBean" %>' in hello3.jsp
* change '<jsp:useBean id="hello" class="HelloBean">
to '<jsp:useBean id="hello" class="my.HelloBean">
Before posting, I searched google three times but couldn't get answer.
I could not get well if you didn't give me help...
Thank you very much. -
Maintaining the structure of a SQL Server staging area and dwh aligned with the Oracle data source
Hi,
I'm working in a context where the data source system, in Oracle, is a continuos work in progress. Each 1-2-3 weeks the data source system in the prod environment is updated with new tables or updated table (with new columns or altered columns). So, it is
important to apply in a rapid manner the related changes in the data structure of the SQL Server staging area and dwh.
The issues to solve are:
a. maintaining SQL Server data structure of the staging area aligned with the data structure of the Oracle data source;
b. maintaing SQL Server data structure of the staging area aligned with the data structure of the SQL Server staging area.
In order to solve these issues it could be useful to think to an authomatic manner to alert when a data structure change occurs and a simple manner to apply the changes on SQL Server data structure.
Any suggests, please? Many thanksWe use Oracle CDC service in SQLServer. It has a flag to indicate the schema changes happening at the Oracle end. We track the schema changes using it and then apply changes to sqlserver side. And regarding automation you can use Biml as suggested or .NET
scripts inside script task.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Oracle BI Apps with SAP data sources
What is the delivered content provided by Oracle BI Apps to map with SAP data sources?
Thank you!As things stand right now SAP R3 is only supported on a much older release of BI Apps (7.8.4). That release used the Informatica SAP PowerConnect technology to populate the Warehouse.
I posted before on this forum the list of supported SAP Modules.
BI Apps cannot use SAP BW. BW can be a direct data source for BI EE however.
In the near future our support for SAP will be up to date and back on track. There are internal efforts underway that I cannot discuss here in the forum. -
Help with Creating a Oracle Data Source
Hello:
I am trying to create a Oracle Data source.
I was successful in creating a JDBC Conection Pool.
But I am stumped creating a new datasource that uses the Oracle Connection Pool.
It asks for a JNDI Name and I have no clue what I should enter in this box.
Can somebody help me?
Thanks.
venkiEnter whatever name suits you. This is the name you will use when looking up your datasource in the JNDI tree, i.e.
Context ctx = new InitialContext();
DataSource oracleDS = (DataSource) ctx.lookup("myJNDIName"); -
Install on vista with Oracle Lite Multiuser Service - SERVICE_START_PENDIN
Hi all,
I'm trying to install app server 10.1.3 on Vista, but on Configuration assistant screen, it stops at BPEL process manager configuration manager ,
error in oraInstall.err:
C:\Users\victoria\AppData\Local\Temp>echo updating ODBC.ini
updating ODBC.ini
C:\Users\victoria\AppData\Local\Temp>echo off
C:\Users\victoria\AppData\Local\Temp>echo updating ODBCINST.ini
updating ODBCINST.ini
C:\Users\victoria\AppData\Local\Temp>echo off
C:\Users\victoria\AppData\Local\Temp>echo updating POLITE.ini
updating POLITE.ini
C:\Users\victoria\AppData\Local\Temp>echo off
C:\Users\victoria\AppData\Local\Temp>exit
Oracle JAAS [Mon May 18 08:36:05 GMT 2009] admin password is changed successfully
opmnctl: starting opmn and all managed processes...
OliteService reports the following status:
The service is installed.
OliteService reports the following status:
The service start pending.
The current status of Oracle Lite Multiuser Service:
Current State : SERVICE_START_PENDING
Acceptable Control Code : (0x0)
installaction.log:
BUILD SUCCESSFUL
Total time: 3 minutes 35 seconds
C:\product\10.1.3.1\OracleAS_1\bpel\samples>ENDLOCAL
BUILD SUCCESSFUL
Total time: 4 minutes 43 seconds
Exit: 0
TASK: oracle.tip.install.tasks.UpdateConfigFiles
Updating configuration files ...
Exit: 0
TASK: oracle.tip.install.tasks.RegisterOlite
Registering Olite ...
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set OB_HOME=C:\product\10.1.3.1\OracleAS_1\bpel
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set OLITE_LIB=C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set OLITE_BIN=C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set PATH=C:\product\10.1.3.1\OracleAS_1\jdk\bin;C:\product\10.1.3.1\OracleAS_1\ant\bin;C:\oracle\product\10.2.0\db_1\bin;C:\app\product\11.1.0\db_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared\;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;C:\product\10.1.3.1\OracleAS_1\MOBILE\sdk\bin;C:\product\10.1.3.1\OracleAS_1\jdk\jre\bin\server
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>set CLASSPATH=C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olite40.jar;C:\product\10.1.3.1\OracleAS_1\MOBILE\Sdk\bin\OLITE40.JAR;
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olsv2040.exe /stop
OliteService reports the following status:
The service stop is pending.
OliteService reports the following status:
The service is stopped.
The current status of Oracle Lite Multiuser Service:
Current State : SERVICE_STOPPED
Acceptable Control Code : (0x0)
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olsv2040.exe /remove
OliteService reports the following status:
The service is removed.
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olsv2040.exe /install
OliteService reports the following status:
The service is installed.
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\olsv2040.exe /start
OliteService reports the following status:
The service start pending.
OliteService reports the following status:
The service is running...
port = 1531
wdir = C:\Windows\system32
The current status of Oracle Lite Multiuser Service:
Current State : SERVICE_RUNNING
Acceptable Control Code : (0x1) SERVICE_ACCEPT_STOP
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>mkdir "C:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite"
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>del /f "C:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite\orabpel.odb"
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>"C:\product\10.1.3.1\OracleAS_1\bpel\..\Mobile\Sdk\BIN\createdb.exe" orabpel "C:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite\orabpel.odb" manager
Database C:\PRODUCT\10.1.3.1\ORACLEAS_1\BPEL\SYSTEM\DATABASE\OLITE\ORABPEL.odb created (VolID = 1736).
C:\product\10.1.3.1\OracleAS_1\bpel\install\bin>exit 0
Could Not Find C:\product\10.1.3.1\OracleAS_1\bpel\system\database\olite\orabpel.odb
Oracle Lite CREATEDB Version 10.2.0.2.0.
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Exit: 0
TASK: oracle.tip.install.tasks.DeployApps
Deploy applications and adapters
Port value is 6003
Buildfile: bpminstall.xml
init-midtier:
Trying to override old definition of datatype echoproperties
common_update_server.xml:
Adding shared library apache.junit ...
Adding shared library oracle.db.lite ...
Adding shared library apache.commons 10.1.3 ...
Adding shared library apache.jdom ...
Adding shared library apache.slide ...
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://victoria-PC:6003/home -script C:\product\10.1.3.1\OracleAS_1\bpel\system\services\install\ant-tasks/bpel_admin_client_script_sl.txt
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
update_server.xml:
restart.container:
Stopping home container ...
opmnctl: stopping opmn managed processes...
================================================================================
opmn id=victoria-PC:6200
no processes or applications matched this request
Restarting home container ...
opmnctl: starting opmn managed processes...
================================================================================
opmn id=victoria-PC:6200
0 of 1 processes started.
ias-instance id=oapp1013.victoria-PC
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
default_group/home/default_group/
Error
--> Process (index=1,uid=503452990,pid=3000)
failed to start a managed process after the maximum retry limit
Log:
C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log
init-midtier:
Setting up the dehydration store [olite]...
dehydrationStore:
Configuring data sources for olite dehydration store ...
Deploying ORABPEL Applications...
deploy-applications:
Deploying Oracle BPEL Process Manager ...
Copying 1 file to C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib
Copying 1 file to C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib
Copying 1 file to C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib
Updating jar: C:\product\10.1.3.1\OracleAS_1\bpel\system\services\lib\orabpel.ear
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://my-PC:6003/home -script C:\product\10.1.3.1\OracleAS_1\bpel\system\services\install\ant-tasks/bpel_deployapps.txt
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
Please advise what's wrong?
thanks
andrewThe following procedure describes the steps required to deploy the DbAdapter.rar file using admin_client.jar:
1. Copy the following libraries from server.xml in an OC4J_SOA container to a server.xml file for a new
container:
oracle.bpel.common
apache.junit
oracle.db.lite
apache.commons
apache.jdom
apache.slide
For example, for oracle.bpel.common, copy the following extract from one server.xml to another and
do the same for all other libraries:
<shared-library name="oracle.bpel.common" version="10.1.3">
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/classes"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel-common.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel-thirdparty.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/bpm-infra.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/wdk.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/connector15.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel-exts.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/orabpel-ant.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/ant_1.6.5.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/bipres.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/bicmn.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/uix2.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/jewt4.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/regexp.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/share.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jdk/lib/tools.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/jlib/ldapjclnt10.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/schema"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/config"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/bpm-services.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/wfapi.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/fndctx.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/phaos.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/system/services/lib/pushapi.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/lib/oracle_http_client.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/uddiclient_api_v3.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/wasp.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/uddiclient_core.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/saaj.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/jaxm.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/builtin_serialization.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/core_services_client.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/bpel/registry/lib/jaxrpc.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rules/lib/rl.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rules/lib/rulesdk.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rules/lib/webdavrc.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rules/lib/jr_dav.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/webservices/lib/wsif.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/oraesb.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/bpm-ide-common.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5/rdbms/jlib/xdb.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/ide.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/javatools.jar"/>
<code-source path="D:\product\10.1.3.1\OracleAS_5\integration\esb/lib/xmleditor.jar"/>
<import-shared-library name="oracle.dms"/>
<import-shared-library name="oracle.jdbc"/>
<import-shared-library name="oracle.xml"/>
<import-shared-library name="oracle.jwsdl"/>
<import-shared-library name="soap"/>
<import-shared-library name="oracle.ws.client"/>
<import-shared-library name="oracle.toplink"/>
<import-shared-library name="apache.junit"/>
<import-shared-library name="oracle.db.lite"/>
<import-shared-library name="apache.commons.logging"/>
<import-shared-library name="oracle.cache"/>
<import-shared-library name="apache.commons"/>
<import-shared-library name="apache.slide"/>
<import-shared-library name="apache.jdom"/>
</shared-library>
2. Restart the container to make sure that server.xml was updated correctly.
3. From the configtools.log file find the opmn port number, for example:
deployer:oc4j:opmn://dimak.au.oracle.com:6012/home
dimak.au.oracle.com - is the machine name and
6012 - port number
4. Launch a new command prompt
and set path and classpath, for example:
set PATH=$ORACLE_HOME\jdk\bin;%PATH%
set classpath=.
where in the classpath there is only one entry - the dot, which stands for the current directory.
5. change directory to the following:
$ORACLE_HOME\j2ee\home
and run the following command (written all on one line) to deploy the DbAdapter:
java -jar admin_client.jar deployer:oc4j:opmn://dimak.au.oracle.com:6012/test oc4jadmin
manager1 -deploy -file $ORACLE_HOME\integration\esb\lib\DBAdapter.rar -deploymentName
DbAdapter2 -parent default
where
* dimak.au.oracle.com should be substituted with your machine name
* 6012 should be substituted with your port which you found in step 3
* test is the name of the container you want to deploy the adapter to
* manager1 should be substituted with your oc4jadmin password
* $ORACLE_HOME\integration\esb\lib\DBAdapter.rar is the location of the DBAdapter.rar file
* deploymentName DbAdapter2 - should be different from DbAdapter, as that name is already used in the OC4J_SOA container. -
Installation problem under AIX 5.3 with Oracle 10g
Hello,
I start an installation in AIX 5.3 machine with oracle 10. I install oracle 10.0 and pathes for oracle 10.2.0.2.0. I also install and all the interim patches through MOpatch utility. I also install the latest R3trans and R3load for unicode installation. But i have 4 errors under phase IMPORT ABAP. In this phase 33 packages completed succesfully. I have 4 packages with errors.
In ImportMonitor.Console.Log i have the following errors:
Import Monitor jobs: running 1, waiting 4, completed 33, failed 0, total 38.
Import Monitor jobs: running 2, waiting 3, completed 33, failed 0, total 38.
Import Monitor jobs: running 3, waiting 2, completed 33, failed 0, total 38.
Loading of 'SAPSSEXC_4' import package: ERROR
Import Monitor jobs: running 2, waiting 2, completed 33, failed 1, total 38.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 1, waiting 2, completed 33, failed 2, total 38.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 33, failed 3, total 38.
Import Monitor jobs: running 1, waiting 1, completed 33, failed 3, total 38.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 33, failed 4, total 38.
Inside SAPSSEXC_4.log i have the following errors:
/usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: T512CLU deleted/truncated #20071130102908
myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.
myCluster (63.20.Imp): 656: return code received from nametab is 2
myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
Under SAPPOOL i have:
usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPPOOL.cmd -dbcodepage 4102 -l SAPPOOL.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: ATAB deleted/truncated #20071130102908
failed to read short nametab of table AT01 (rc=2)
(CNVPOOL) conversion failed for row 0 of table VARKEY = 㠱㠱㠰â â â â â â â â â â â â â â â â â â â â â â
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
I read notes 421554 and 898181 i execute the directions from the notes to change the R3load and R3trans.
Do you have any idea how can i procceed with the errors?
Thank you in advance
Thanasis PorpodasHi,
look at sap note 921593 and search for myCluster ,
read that section following is a part of that note.
Symptom:
During the import into a UNICODE system the following error occurs
(for example in the SAPCLUST.log):
myCluster (63.2.Imp): 2085: (Warning:) inconsistent field names(source): physical field K1N05 appears as logic K1N5.
myCluster (63.2.Imp): 2086: (Warning:) further investigation recommended
myCluster (63.2.Imp): 1924: error when checking key field consistency for logic table TACOPC .
myCluster (63.2.Imp): 1927: logic table is canonical.
myCluster (63.2.Imp): 1930: received return code 2 from c3_uc_check_key_field_descr_consistency.
myCluster (63.2.Imp): 1224: unable to retrieve nametab info for logic table TACOPC .
myCluster (63.2.Imp): 8032: unable to acquire nametab info for logic table TACOPC .
myCluster (63.2.Imp): 2807: failed to convert cluster data of cluster item.
myCluster: CLU4 *00001*
myCluster (63.2.Imp): 319: error during conversion of cluster item.
myCluster (63.2.Imp): 322: affected physical table is CLU4.
(CNV) ERROR: code page conversion failed rc = 2
|
| RSCP - Error
| Error from: Codepage handling (RSCP)
| code: 128 RSCPENOOBJ No such object
| Dummy module without real rscpmc[34]
| module: rscpmm no: 2 line: 75 T100: TS008
| TSL01: CPV p3: Dummy-IPC p4: rscpmc4_init
`----
Cause:
This problem is caused by incorrect data which should have been removed from the source system before the export.
Solution:
There are two possible workarounds:
1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to this line.
2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is (re-)started;
search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines.
Maybe you are looking for
-
Since I have to get it fixed and I'm a college student and need my laptop asap, I just want to know how long it will take for my screen to get fixed so I can go back to doing my work.
-
Has anyone had trouble connecting to the iTunes Store while using Itunes 10 for PC? I cannot check for updates, sign in, or connect to the store so all my app downloads must be done from my device. Using: Windows Vista 32-bit. Cox McAfee anti-virus/f
-
Acrobat 9 pro seems to be damaging files, why?
I tried searching for information. but haven't been able to find a prior discussion that helps. I have been using acrobat 9 pro on windows vista x64. I build files by dragging and dropping pages from one file to another. This is so that instead of
-
Jerky scrolling and Safari not displaying most jpegs in one user a/c
Hi I upgraded my 15" mid 2010 MBP to Mountain Lion and find that it is behaving oddly. I have two different user accounts and the oddities vary between accounts. In one, most jpegs in Safari are not displayed, substituted with black rectangles with p
-
How to reduce illustrator CS4 file size
Hi, How to reduce illustrator CS4 file size, the file size is alots bigger compare to art work done in indesign?