Authorisation to be restrict to plant level for VA01

hi experts,
is it possible to restrict the user to plant level for the transaction VA01.
if possible authorization object for the same or some other process

I think you can maintain the same through MV45AFZZ by linking with the User name & Plant itself.
Otherwise you can maintain your own Authorization Object and assign it to User Name Profile ( through BASIS Constnt) by mentioning Plant & Activity in an Authorization Object.
Best Regards,
Ankur

Similar Messages

SAP Query SQ01 restriction at Plant level

Hello All,
Is possible to restrict SAP SQ01 Query report at Plant level? I mean if it can be restricted through Auth object at Role level?

Hi,
OK, when a query is created you can hard code selection parameters into the query itself (i.e. default in the company code). That way you have have queries:
ZQ_SHIP_LIST_1000
ZQ_SHIP_LIST_2000
ZQ_SHIP_LIST_3000
Where the 1000, 2000, 3000 represents a data element by which you are separating them.
As Arpan mentioned you could tie this in with your user group policy to make sure users in certain groups (e.g. arranged by plant) are only allocated queries for their respective area.
A downside of this is that you will potentially have a lot more queries. Depending on how your S_QUERY auths are set up, the selection screen entries could be modified.
Ultimately both methods are a faff and my POV is that if you want to report on business data then it's best to code reports from scratch (including the required auth checks) or use something like BW with restrictions tied to the data model.

User exit for item level plant checking for va01

Hi ,
I have got many user exits for va01 .I have to check the plant at item level in va01 . Kindly give name of user exit for this task as im not able to find the right one.
Thanks .

Hi,
Please check through path
S&D>>>System modification>>>Userexits.
here you will find various user exits available for SD module.
Regards
kapil

How to make delivery plant fixed for va01 transaction in abap

hi.
My req is to make delivery plant to a fixed plant code for example 'KO01'. in va02 transaction.
regards
Rohit

Hi,
Use the form routines in user exit "MV45AFZZ".
If you want to change the plant while you open the order in VA02, use the form-routine "USEREXIT_READ_DOCUMENT". If you want to change the site only when you save the order use the form-routines "USEREXIT_SAVE_DOCUMENT_PREPARE" or "USEREXIT_MOVE_FIELD_TO_VBAP". In all these cases modify the structure field XVBAP-WERKS.
Regards
Vinod

Can we restrict deliveries at plant level for a particular period

Hi all,
At month end , if we want to close the sale, and restrict all the delievries in that month for a particular plant.. will that be possible, if yes how?
can anyone advise.

Hi,
Temporary Soluition may be
In the Material Master,there is a setting for Plant-sp.matl status.
You can use this for stopping the posting .
it can be used to stop the material from being used in POs, BOMs and movements etc. by plant (you would also need to use the sales block -Dchain specific status to prevent sales orders).
Thanks,
Raja

Plant Level Restriction in Tx. OX09

Hi,
I have an requirement to make restriction at plant level while executing transaction OX09. i checked transaction and found it is using SM30. But while executing this transaction i receive below screen for Plant selection.
can we make restriction for plant selection with that screen or we have some other option so that user can execute this transaction for assigned plants only.
Thanks in advance.
Himanshu

Hi Himansu ,
As said by Dev End user does not need to do any entries in " OX09".
and as per you requirement on it MM consultant needs to change SLOC then i think he should be need authorization for you ABAP development client and he should be having authorization for all plant bcz He need to change SLOC for any plant.
Even though you want to restrict him/her for particular Plant just create a Role and restrict the user for particular plant in Object "S_TABU_LIN" and assign that role to user.
Thanks and Regards,
Amit Patel

How do we restrict the user access for a particular G/L account

Dear Experts,
At our customer site, we follow master / derived role concept for authorisations.
We have a requirement to restrictict user at G/l account authorisation level.
I am aware that every g/l account account has a authorisaition group. But g/l account authorisation is a non-org value for which the present value is * for brgru, we cannot restrict by user/org. At our customer site the authorisations are provided at master role level for a designation and derived role is restricted for a plant, BA etc..
Is there is any user parameter level restriction which can handle this requirement, i mean user parameter for specific g/l account, as we do LIF pid to restrict vendor level access.
Appreciate your suggestions ASAP.
Best regards,
M.Kumaran

Depends.
What are you trying to protect? GL account masterdata (FS00) or FI document creation for specific GL accounts?
Without knowing more about the design principles behind your roles, your release or other restrictions, I would suggest:
(1) grouping off the GL accounts you want to protect in authorization groups (maintained via FS00);
(2) deactivating either object F_BKPF_BES (if your trying to restrict FI document creation) or object F_SKA1_BES (if your trying to restrict access to GL account masterdata) or both in master/derived role;
(3) create several separate roles that would contain only the aforementioned objects with access to specific GL account groups;
(4) assign the roles from step 3 to users as required.
Hope this helps.

Default profit centers Plant wise for Balance Sheet tax relevant Items.

Dear All,
We have an issue in profit center acccounting.
In balance sheet accounts, Vat input tax payable, TDS payable, Cenvat clearing etc are picking profit center from 3KEH. When Exicse is getting captured cenvat clearing account having the profit center but while doing the MIRO cenvat clearing do not have profit center & plant.
Why it is so?
Basically we are doing the following steps.
1. Purchase order creation ME21N.
2.Goods received via migo
3. invoice receipt via miro.
At the time of miro posting, system creates automatically accounting document, with default profit center maintained in 3KEH, which are assigned to Vat input tax payable, TDS payable, other tax accounts. For GR/IR clearing account right profit center is picking without any mistake, while doing MIGO & MIRO.
We need to extract the Balance Sheet profit center wise at plant level.
Derivation rule is created for this balance sheet account along with Valuation area condition to post to correct profit center maintained under Tcode: 3KEI . But system is taking only default profit center (3KEH).
I have checked configuration and the following areas like Material master costing view, tax code areas, and account group but did not find any mistake.
Please advice and Guide us, how to get correct profit center at plant level for these balance sheet accounts instead of default. (I want to make default profit centers plant wise).
It is urgent.
Thanks,
Shailendra Gupta.

Hi!
You can use following report :
S_ALR_87013336 (Report for Balance sheet at Profit Center and Group Level).
Hope this will help.
Thanks & Regards,
Taral Patel

Regarding Number ranges at plant level

Hi all,
We have a requirement for number ranges at plant level for purchase orders. How it can be done ? whether to go for this with userexit or directly from config. it can be done.
Thanks And Regards

Amit,
Check with this BADi ME_PURCHDOC_POSTED
Method:POSTED
use FM NUMBER_GET_NEXT and get number and assign to parameter IM_EKKO-Ebeln which is PO number.
Create a Number Range in SNRO Transaction.
Amit.
Edited by: Amit Gujargoud on Sep 5, 2008 8:32 AM

MM01 material copy from at plant levele

Hi,
I have a simple but very important question to ask about MM01 material "copy from" function.
When you copy a material at an organisational level other than general data (at plant level for exemple), SAP copies some data and left some others blank
For exemple, in "Work Scheduling" material views, it copies "Prod.Sched.Profile" data but not "Unit of issue" nor "Prod.stor.loc." data.
What make the difference between these data ? Why all isn't copied ?
Thanks for help
regards
Morgan

storage locations are plant specific customizing.
SAP cannot assume that the second plant would use the same keys like the first plant.
If SAP would copy the storage location, then it would result in an error if it is not customized for the target plant - better not to copy it.

Info Record create at Plant level at the time of PO

HI,
Is the system create the Inforecord at plant level not at P.Org level.Problem is system can create the Inforecord at P.Org Level.
If possibility that system create the Inforecord at plant level at the time of create the P.O.
What setting need to configure in the system.
Thanks & Regards,
Andra

Hi,
Go in transaction OMF0 and change the condition control as plant level
for all those plants where the info records should be maintained at
plant level. This will solve your problem.
regards,
JP

Tax column at line item level in VA01/VA02

Hello All,
I had a requirement to add the tax column at line item level for va01/VA02 transaction.
I modified the screen 4900 and added the VBAP-TAXM1 column to the item table control and made that column input enabled.
Now I had to calculate the TAX conditions based on the input in that tax column. None of the user exit is triggering when I change the values in this field, do I need to make any changes in the PAI of the 4900 screen in order to make the userexits trigger or am I missing anything?
Thanks & Regards,
SasiKiran.

Hi
Please, see SAP Note 862228 - Order reason for returns on item level. It is related with field AUGRU. Remember that it is a modification. I suggest you to add in addition data (for instance, SAP Note 209278 - Display of customer-specific fields in sales doc, SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B', SAP Note 420546 - Additional data B and transaction variants in sales order and related notes).
I hope this helps you
Regards
Eduardo

To restrict authorization for tcode MEK1,MEK2,MEK3,MEK4 at plant level.

Hi,
We have a requirement where we need to restrict authorization for tcode MEK1,MEK2,MEK3,MEK4 at plant level.
Presently we can restrict authorization at Purchasing organization level but not at Plant level.
Any pointer please!
Regards,
Chetan

First of all, this is not the right forum to post such a question. Coming to the requirement, this can be achieved by creating a role in PFCG where you can restrict plant and assign this role to each user id. Your basis team can do this.
thanks
G. Lakshmipathi

Report at Material level(for all the plants)?

Hi Experts,
We have simple query which gives following output.
&Plant&Material No&Creation Date&Issue date&QTY issued&
P1      M1         01/10/2004    01/01/2005        10
P2      M1         01/12/2004    15/12/2004        20
P3      M1         01/01/2005    15/01/2005        30
Actually I want to report at material level ( for all plants in one shot ) , additionaly I want to show the minimum creation date for that material and minimum issue date and sum of all 3 qty issued.
The output should look like
&Material No&Creation Date&Issue date&QTY issued
M1           01/10/2004    15/12/2004       60
Can any body suggest how do i get the date fields with the above condition
Thanks in advance.
Regs,
Mahantesh

Hi Mahantesh ,
Try this:
Take two more KFs in the cube.
1) Creation Date as KF
Type: Date
Exception aggregation : First value
Aggregation reference : 0material.
2) Issue Date as KF
Type: Date
Exception aggregation : Last value
Aggregation reference : 0material.
In the query take 0material in rows and above 2 KF in the columns (May be , here , you need restriction also. 'Creation Date as Characterstic' > 01.01.1000 ,Issue Date as characterstic' < 31.12.9999 )
With rgds,
Anil Kumar Sharma .P

To restrict authorization of tcode MEK1,MEK2,MEK3,MEK4 at plant level

Hi,
We have a requirement where we need to restrict authorization for tcode MEK1,MEK2,MEK3,MEK4 at plant level.
Presently we can restrict authorization at Purchasing organization level but not at Plant level.
Any pointer please!
Regards,
Chetan

Hi,
You can restrict the users for the authorization of these T-Codes on their User ID. Take help of Basis who controls Roles & Profiles. (T-Code PFCG)
Hope this helps,
Best regards
Amit Bakshi

Authorisation to be restrict to plant level for VA01

Similar Messages

Maybe you are looking for