Authorization error in sm59 with a weird pop-up

Hi
I want to use a server proxy, therefore created an http connection in sm59 of the xi-system pointing to the ERP-System.
My connection parameters
Target Host: my ERP-System Host
path prefix: /sap/xi/engine?type=entry (maybe receiver?!)
Service Number: 8084 (http port in smicm)
User: XIAPPLUSER (with sap_xi_appl_serv_user)
After testing the connection a pop-up appears and asks me to enter my username and password again...
How can I solve this problem???

Hi Gokhan,
You need to do the following.
In your XI system,
Make a HTTP connection to your Business system.
Target Host = Host name of Business System.
Service No: HTTP port no of Business System.
path prefix = /sap/XI/engine/?type = receiver.
USer name and password of a CPIC user with SAP_ALL authorization.
In your Business System
Target Host = Host name of XI System.
Service No: HTTP port no of XI System.
path prefix = /sap/XI/engine/?type = entry.
USer name and password of a XIAPPLUSER with relevant roles attached while it was maintained in XI system.
Cheers
JK

Similar Messages

RFC error "No authorization to send IDOCs with message type ..."

Hi all,
I have now tried just about everything I could think of, applied all the notes mentioned on this forum but still no luck. Can anyone please help ...
I have got a file to idoc scenario, the status in the sxmb_moni is successful, but the outbound processing logs an error. When I go to transaction SM58 I get an error for the user XIAFUSER with the message "No authorization to send IDOCs with message type WPUUMS".
I have tried giving this user SA_ALL access and still got the same error thus concluding that this is not an authorisation error.
Any suggestions?
Regards,
Liesel

Hi Liesel,
The RFC destination that you have put in IDoc communication channel must be present in your SAP XI system, transaction SM59 also.
Please check if the user id/Password that you have given has all the authorization.
Also check the User ID and passwrord in SM59 in R3 and see if a Remote Login is possible.
There is also some configuration by which the clients are allowed / blocked from receiving Idocs from XI. Basis guys can do it for you. Please approach your basis consultant. Hopefully that helps..
Regards,
Abhy Thomas

YouTube says there is an "Authorization Error" when I try to get on the site with Firefox. Can I fix this?

When I try to get onto YouTube, the site is completely white with the words "Authorization Error" in the top left corner. For a while, all I had to do was reload YouTube and it was fine. Now it just won't work at all. I have Internet Explorer on my computer as well and YouTube works fine on there. When this error occurs, the icon in the address bar changes back to YouTube's old icon.
I have tried:
-Updating Firefox
-Restarting the computer
-Closing and re-opening Firefox
-Typing https instead of http before the address
-Googling and clicking Google's link to the site (yes, a feeble attempt, I know)
Does anyone know what I can do to get YouTube back on my favorite browser? I'd like to stop having to run to Internet Explorer to use this site.
Thanks!

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

HT1338 What's going on with iCloud (MobileMe)? I'm able to sign in here, but I can't access mail on my Macbook Pro, iPhone, or work computer. I always get an authorization error (user-id or passwork wrong). This has been going on for almost a week now.

What's going on with iCloud (MobileMe)? I'm able to sign in here, but I can't access mail on my Macbook Pro, iPhone, or work computer. I always get an authorization error (user-id or passwork wrong). This has been going on for almost a week now.

The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
What you are doing to sync them should work i.e.
- connecting the iPad to your Mac
- selecting the iPad on your Mac's iTunes
- selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
And do a soft-reset and retry syncing.
I assume that music and other items sync ok ?

Unable to access or view data with no authorization error

Hi Experts,
Appreciate your guys help. I am ID administrator where by some of our user ID unable to view data/ display report for the some of data even the appropriate authorization already assigned to the user. However when we check in the transaction SU53 - authorization checking no error shown!
There is a case whereby user report that his ID (e.g. SAP ID = ABC) unable to access a transaction or infotype data for example HR infotype masterdata,upon checking there is no authorazition error (checked insu53), when copy the ID (ABC) to another new ID (ABC1) with no changes on the roles, the ABC1 ID able to access the said transaction.However, when copy back ABC1 to the ABC (naming conversion only), the ABC ID still unable to access the transaction with no authorization error. the
main problem here is the original ID is not working, but works fine if it is copied to another ID name.
Kindly advice.

Hi Manikya Raju,
Can you explain details?

Error : No authorization to send IDocs with message type MATMAS

Hi All,
My scenario is FILE-XI-IDOC.
I am getting chequered flag in SXMB_MONI,but in that under outbound status I am getting red flag.
When I check in SM58 I am getting message as "No authorization to send IDocs with message type MATMAS".
Do I need to give any authorizations on XI side or on R/3 side?
If so, what is the authorization required?
I could not find the note :837595.

<i>You use the IDoc Adapter in the Exchange Infrastructure and you try to use the IDocs to receive or send data. For these IDocs, an attempt is made to load the IDoc metadata from an R/3 reference system with an SAP NetWeaver Release lower than 6.20.
This occurs either at runtime, whereby the relevant messages run into 'System error' status, or when you use transaction IDX2 during manual loading of the metadata. In this case, the reference ystem is called by RFC and the logon user of the RFC destination does not have the necessary authorizations for determining the metadata.
Solution
In transaction PFCG, extend the role of the logon user by adding the following authorizations:
Authorization object S_RFC
      Field name RFC_TYPE value FUGR
      Field name RFC_NAME value EDIMEXT, SDTX
      Field name ACTVT    value 16
Authorization object S_IDOCDEFT
      Field name ACTVT value 03
      Field name EDI_CIM value ' '
      Field name EDI_DOC value TXTRAW01
      Field name EDI_TCD value WE30
Authorization object S_CTS_ADMI
      Field name CTS_ADMFCT value TABL
Authorization object S_TABU_DIS
      Field name ACTVT      value 03
      Field name DICBERCLS value</i>
from the note mentioned above.
Regards
Bhavesh

LMS 4.1 - dbreader.html -- Authorization error with DB-Users

Hi all,
in our lab-environment we installed LMS 4.1 from scratch.
Trying to connect to eg. ani-db via URL (https://<server>/dbreader/dbreader.html) with user cwsiSA I got error message
stating "Authorization error".
Is that default behavior?
We need SQL-Connect to DB-Tables, as some "self-written" perl-scripts try to collect data.
Are there any steps necessary to enable access to DB-Tables (and Views) ?
Thanks for your feedback
Lothar

Probably the user role is missing this authorization. Go to Admin > System > User Management > Role Management Setup, and make sure the role assigned to this user includes DBreader access. You are looking for Lan Management Solution > Admin > System > DBReader Access.

Pisuper Authorization error, I can't logged with any user on Int Builder

Hi SAP Guru's ,
Please help me as i new in SAP XI . I am unable to logged on in Integration Builder with any user i tried pisuper, sapuser but still got the same error "Authorization error, unknown username or password" . I check with T-Codo SU01 but pisuper does not exist so i create one user and assign him SAP_XI_Developer , SAP_XI_Configuration etc but still i am unable to login so kindly requesting you to please help me as quickly as possible.
even though i am unable to logged on user management with any user. PLease tell me the step by step configuration of how to setup each and every part of XI.

check with naveen's reply
XI 7.0 - Authorization error; unknown username or incorrect password
Also visit the blog
Unable to open IR/ESR/ID ? (XI/PI/PI 7.1) [Updated for PI 7.1 support]

No authorization for action: CRE with object: ADCP

Hi,
I encountered the following error when creating an index:
No authorization for action: CRE with object: ADCP
I was at transaction DB02 -> 'Checks' -> Database<->ABAP/4 Dictionary.
The checks indicate that there are some optional indexes that are not created.
The error is encountered when I select one of these indexes (eg. ADCP-I01) and try to create it using the 'Create in DB' button.
Do I have to assign some certain permission to my account? I am already holding the SAP_ALL and S_A.SYSTEM profiles.
Thanks for any help,
Tzyy Ming

Hello,
As i had expected DDIC userid did the needful.
to see whether the index is created, you need to do the following.
start transaction DB02
click on the refresh button
You would then get a new pop up with two different buttons.
now on this pop up click the 'perform database checks' button.
System might give you a warning 'This will take time' , click yes and wait for the system to refresh the data.
Once system has refreshed the database data, you should be able to see your newly created index.
Regards,
Siddhesh

Issue: "No Authorization to send Idocs with message type Orders" - IDX5

Hi All,
I am working on a File to IDoc(Orders.Orders05) scenario. The sender is PI Server and the receiver is the SAP ISR system. A technical system has been created in PI SLD for the ISR system and a Business system is added to that. The logical system created in ISR system using Tcode BD54 is added to the business system in PI. A new RFC destination is created in PI system to connect to the ISR system.
On the ISR system Partner profile is created using TCode we20 with the same logical system name already created using Tcode BD54.
When sxi_monitor is executed on the PI system, It shows checked flag on the Inbound side and Red flag on the Outbound side. And when idx5 is executed, it shows the new Idoc number and when it is double clicked, it shows the Status Text as
"No Authorization to send IDocs with message type Orders".
All authorizations have been provided on the Sender side.
Please let me know if any authorization need to be provided on the ISR system or Is this an error on any settings.
Thanks in Advance.
Stalin S.

Hi,
Check this Thread which deals with the Authorization Issue
RFC Adapter
And also check this how to check whether u have sufficient authorization to send the Idocs or not
To test the Authorization check
Double click the RFC Destination that u have created in XI towards R/3 in SM59
Select UtilitiesTestAuthorization test
By this you can come to know whether your user is having the propper authorization or not
REgards
Seshagiri

Authorization errors in IX2-DL

Hello
I have a problem with my network storage I recently bought.
I connected and configure it, try to store some data, try to download a torrent and everything works fine.
Till I upgreaded software.
New software needs users and admins to work, so I created my admin account in config pop-up window. But when I want to change users permissions I get message "Authorization error" every time. I launched factory restore on device with faith it restore the original firmware, but it didn't, so I got this message again.
Without users account I can't change files on discs - replace, delete etc.
Worse - after logout IX2 don't recognize my username and password.
On older firmware (originally installed) everything was fine, and I don't need any accounts to manage files and configure the device.

Are you able to access the web UI at all or is it not accepting your credentials? You can try the pin hole reset, this should reset the name and password. When you set up the shares try selecting permissions set to everyone.
Using the device reset button
The release notes clearly show the new firmware has the security always enabled. However, you may be able to contact tech support for help reverting to the old firmware.

Authorization error while attaching document in ME22N

Hi,
Scenario 1: I attach a document in ME22N and then save it. Result: I get an authorization error.
Error is: "You have no authorization for extensions (activity03)"
Scenario 2: I just make a change (say in price) without attaching any document and then when i try to save it. Result: There is no authorization error.
Message (output) type in both the cases is EDI.
On further investigation, we found the authority-check abap statement which is responsible for throwing the error.
authority-check           object authority_obj_edi_deftool
            id 'EDI_TCD' field authority_tcode_edi_deftool
            id 'ACTVT'    field pi_activity
            id 'EDI_DOC' DUMMY
            id 'EDI_CIM' field pi_cimtyp.
This statement gets executed for both the scenarios and with the SAME variables but it throws error in case of scenario 1 only.
Following are the values of the variables in BOTH cases:
authority_obj_edi_deftool = S_IDOCEFT
authority_tcode_edi_deftool = WE30
pi_activity = 03
pi_cimtyp = Z2ORDERS02
Any help is appreciated.
Regards,
Chinmay

Dear,
Kindly contact your basis team. it will help you.
Please give him SU53 screen short for his reference.
Regards,
Sandip

Installation of Client Access role fails on Windows Server 2008 R2 (Execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP")

Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin Wilson

Hello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson

Log SSP and Authorization Errors

I asked for this on the feature request website
"It seems that apex does not log SSP errors or Authorization errors, or if it does, they are no available in an apex view. For example, if a user changes the page number in the url to a page he is not authorized to see, an error page is dispalyed, telling him that he cannot see this page. As far as I can tell, this error is not logged in the apex views. Same goes for, when a user tries to change an id in the url."
My item was closed with the comments
"The error messages are logged into the activity log if activity logging is enabled for your application. Have a look at the column ERROR_MESSAGE in the view APEX_WORKSPACE_ACTIVITY_LOG. "
Well I tested it again.
I went to a page and changed the item_id and I received the checksum violation message.
I then did a select * FROM APEX_WORKSPACE_ACTIVITY_LOG and looked for the error message.
There was no error message.
Can someone else try this
Gus

Hi Gus,
I just have setup another test at apex.oracle.com
workspace: patricks_test
user: guest
pwd: 123456
1) Run application 24683 and login as guest/123456
2) If you click "Customers" you will get the authorization error
3) If you click "Products" and then pick a product to navigate to page 6 and afterwards modify the value of P6_PRODUCT_ID you will get the checksum error
4) In the Builder navigate to Administration -> Monitor Activity -> By Application -> 24683 and you will see the entries of APEX_WORKSPACE_ACTIVITY_LOG
When you did the query on APEX_WORKSPACE_ACTIVITY_LOG, did you verify that your app is writing activity logs at all? And second, have you connected with the parsing user of your application?
Regards
Patrick
Member of the APEX development team
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

No Authorization error in executing a planning sequence

Hi,
We are using BI 7.0 Integrated Planning.
We have implemented Mark Bernaud's file upload solution. We have used a planning sequence that uploads the file and stores it in a cube. Using it, we are able to upload files without any problem when executing with a SAP User Id which has all the authorizations (the user id has SAP_ALL specified in its list of profiles). Now, we have a requirement where we need to execute the file upload using a user id which has limited authorizations. When we are trying to execute the file upload with the userid that has limited authorizations, we are getting the following authorization error.
'You are not authorized to execute sequence PL_SEQ_FL_UPLOAD'
where PL_SEQ_FL_UPLOAD is the name of planning sequence we are using. We have also included the authorization variable in the filters being used as suggested in one of the blogs but this didn't help.
Could anyone please let us know the authorization objects to be added to the user id to enable access to this file upload.
Many Thanks,
Narendra.

Thank you very much Diogo,
The objects you suggested were already there. We have successfully traced the error by switching on the trace using ST01. We found the reason for the error to be that display authorization is not provided for S_RS_PLSQ whereas execute authorization is already present for that.
Once again thanks Diogo.
Many Thanks,
Narendra

Authorization error in sm59 with a weird pop-up

Similar Messages

Maybe you are looking for