Authorization for Intercompany Sales

Hi,
I have an intercompany situation, company A and company B. UserA can perform sales transaction for company A only. Now with intercompany sales, i want UserA to view sales order for company B but cannot see the pricing condition for company B.
May I know how to perform authorization for this?
UserA have authorization for sales org A. How to restrict pricing condition to sales org A only, but still can view sales order for sales org B?
regards,
zl

Hi,
VA03.
UserA can VA03 for all Sales Order for Sales Org A. For Sales OrgB, UserA can view using VA03 but the pricing condition tab should not be accessible.
How to do this?
Thank you.
regards,
zl

Similar Messages

How to avoid special stock indicator for intercompany sales transitions.

Hi Friends
I have an issue Intercompany sales .if I enter intercompany plant(Delivering plant) in the sales order system is taking special stock indicator and looking for sales order stock.
If I enter company code plant for sales from unrestricted stock, system is not taking special stock indicator.
Please advice how to avoid special stock indicator for intercompany sales transitions.
Thanks in advance.
SRK

Ravi,
Special stock is generally determined by the MRP strategy group in the material master of the plant against which you place your order. The strateg(ies) contained in the strategy group will determine the SO requirements type, which will in turn determine whether or not the order is 'account assigned' (special stock).
It is normal to only have one strategy contained in a strategy group. However (and I seldom recommend this) SAP will support multiple strategies within one strategy group. In this case, you could have both MTS and MTO orders against the same plant/material, by manually altering the requirements type in the sales order. This scenario is usually difficult for a planner, and involves additional manual attention to make everything work.
I suggest that your first avenue is to change the Strategy group in the material master of the delivering plant to one that supports MTS. This has a big impact in Controlling and in Production Planning, so ensure that all affected functional groups are aware of what you are doing, and of the resulting changes that they will experience. The transition from MTO to MTS must be carefully controlled.
If you are not a PP expert, I suggest you consult with your local PP expert before embarking on this change.
Best Regards,
DB49

Credit Memo Request for intercompany sales process

Hi Experts
I try to find SAP notes regardsing the credit memo request for intercompany related issue but I can
not find any nates. The customer return the goods with 2 different
scenario :-
-Return with credit
-Return with replacement.
Can anybody explain how this 2 scenario perform in the SAP
intercompany sales process. Appreciate for your help. Thanks in advance.
Regards,
Jennie Tan

Already answered
Enter IG (internal credit memo) as the billing type for intercompany
billing for order type RE.
Cust-Sales/distrib-Transactions-Billing-Intercompany billing-Order types
Intercompany billing always refers to a delivery
Processing flow will be:
1. Create returns request invoice receipt (with or w/out reference)
2. Create returns delivery and goods receipt
3. Create credit memo invoice receipt for customer for 1.
4. Create internal credit memo for 2.
Therefore you must make the following entries in the document flow
for billing documents:
Target BillType        DlvType              ItemCat
a)    IG                  LR
b)    IG                  LR                    REN
Parameters for entries:
For a) Copying requirement: 14 Dlv.-rel.header IV
      Copy item no.: x (Check and decide yourself)
For b)Copying requirement: 15 Dlv.rel. item IV
      Data VBRK/VBRP      : 1 Inv.split (sample)
      Billing quantity    : B
      Qty/itm val.pos/neg : +
      Pricing type        : G
Also, refer following SAP Notes
13160 - Returns with intercompany billing
24756 - Credit memo requests with inter-company billing
652007 - Reporting internal credit memos on arrival side
11980 - Intercompany billing with order-related billing document
164074 - Problems for internal invoices on returns
Thanks & Regards
JP

No authorization for a sales document

Hello,
We are facing a strange issue. We have some sales orders. When user is trying to Access VA02 and modify a contract, We are getting an error as "No authorization to change this sales document". We could change some sales orders. We have observed two things here,
A) if a sales order has items in it,--> "No authorization to changes this sales document"
B) if a sales orders has no items in it --> "No problem with the authorization, we can modify the order".
Document type used for this sales order is ZC02. We have given ZC02 in role and 01,02,03,43,C1 and C2 activities in the roles along with proper Org values. still we are not able to open the sales order with change mode.
Could you please help me resolve this issue??

That is a custom authorization object and not a standard SAP one, right? My guess, in that case, is that the code that implements that auth object, presumably in a user exit or BAdI in VA02, is incorrect. That must be your code - time to speak to the person that wrote it?
Steve.

Authorization for Accounts(Sales district) and Sold-to parties

Hi Experts,
I have a requirement where I wanted to restrict Sales districts(Accounts) & Sold-to's depending on the employee responsible for.
The requirement goes like this.
There are Sales districts. Each Sales district has around 4 to 5 Sold-to parties.
For each Sales district a sales manager is responsible, and for each sold-to party a sales group is responsible.
Now when a manager logs in using his logon credentials then he should be able to see only the sales districts(Accounts), he is responsible for and the sold-to parties for that particular Sales district(Account).
But when a sales group logs in , he should be able to view only his sold-to parties, which he is responsible for.
Any clue on how to achieve this requirement.
I have used CRM_ORD_LP, CRM_ORD_OP & CRM_ORD_OE but they are related to actvities, leads & opportunities authorization objects.
How about Sales districts (Accounts)? How can I restrict it to Sales districts(Accounts) for managers and sales representatives?
Thanks in advance.
Rohan

If you don't need to restrict access to all customers but only to propose customers assigned to certain salesman you could probably do it via partner determination rule where you would say when the employee responsible is entered in sales document that customers belonging to this salesman are proposed on selection screen.
If you need to restrict it then I think you have 2 choices:
- use ace to restrict by sales district
- create Authorization Groups, assigned them to customers and then create pfcg roles for salesman providing in pfcg access to certain Authorization Group. in pfcg you use B_BUPA_GRP object. But the problem using pfcg is that you will have to create as many pfcg roles as many salesman you have and this can be a huge thing.
So ace will probably be more appropriate.

STO for Intercompany Sales

Hi
Can you let me know the configuration steps for Configure Intercompany Stock Transport Order.
MV

Hi
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
Thanks
CGRA

Set "Sales Office" as an authorization for all sales document

Dear SD Expert,
        Base on ECC 6.0, I have to set authorization which check u201CSales Officeu201D in create/ change / display all sales document.
         I found that authorization object u201CV_VBKA_VKOu201D contain authorization filed ; that are, sales org, distribution, division, sales office and sales group. Also u201CV_VBKA_VKOu201D have assign to (Transaction code: VA03, VF03) as standard SAP (see in T-Code : SU24) . However, when I assign; for example, T-Code u201CVA03u201D, u201CVF03u201D in PFCG. After generated profile, only u201CSale org, distribution chan., and divisionu201D is pop-up. I wonder that
1)     Why u201CSales officeu201D dose not show in u201Corganization levelu201D ?
2)     How can I set u201CSales Officeu201D as an organization level? for checking an authorization
Please give me step-by-step.
Regards,
Prach

Refer SAP Help url it may help you , I did not work on this,[Maintain authorizations|http://help.sap.com/saphelp_45b/helpdata/en/91/6cec6eb435d1118b3f0060b03ca329/content.htm]

Authorization for printing sales documents

Hi all,
I have created a role having a series of transactions and I created the authorisations automatically for these transactions.
The role operates fine, allowing users to use only the transactions in the role and no other.
The problem is that the users are not able to print messages, I mean they are not able to print sales documents and purchase documents, such as sales orders or purchase orders.
Any ideas??? what objects should I add in authorisation sequence in order for them to be able to print all documents

Have users attempt to print, then immediately do transaction SU53. That should give you the clue on what needs update. Good luck.

Profit Center Billing blank in sales order for intercompany sales scenario

Dear Experts,
It's weird that i got some sales orders which have blank 'Profit center billing' , but carried out proper 'Profit Center'.
Because Billing copy 'Profit center' from 'Profit center billing' in sales order ,so i got error while creating billling.
Can somebody explain this to me ,thanks a lot

Hi,
Please check the configuration. Check mainly the assignments.Before that check your material master and check when it was maintained ie., before the sale order creation or after???.
Regards,
Rajeswari

Intercompany sales - IV billing for NLCC delivery

Can anyone advise how we setup pricing for IV billing for intercompany sales generated from PO? Seems like the std setup does not contain any pricing in the IV billing.
Also how's the pricing being calculated from intercom perspective?
Thanks
Peter

Hi,
delivery type NLCC is used for STO between two company codes and delivery type NL is used for STO within one company code.if u use NLCC, ZIVU001 STO pricing procedure should be there and u should have ZIVU condition type..please check whether u r having this type of pricing procedure and if yes, u assign it to ur sales area. u may get the solution..
Regards..
Yogi...

Transfer of Intercompany sales orders using LSMW

Hi
I have to Transfer the open intercompany sales orders using LSMW. Consider a scenario where customer places an order on sales org A with plant A. sales org A raises purchase order on Sales org B with plant B. The material moves from Plant B ie supplying plant to delivering plant A. THen it is delivered to custome from plant A. Can u please tell me whether i have to pass the suppying plant or it will be determined automatically. Similarly what about the purchase requisition no. Is it created automatically.
Thanks
regards
Tushar

Hi,
The purchase requisition is going to automatically created incase of a intercompany order (ie nothing but the third party order). In this case of orders the line item category in the sales order would be TAS. The intercompany sales order nothing different from a normal order during the creation of the order, after that the operations will be different from the normal standard order. You can use the same LSMW which you have used for transfering normal standard orders.
The configs are going to be different in the system for intercompany sales orders compared to the standard sales orders. That is the problem of the functional consultant to take care.
Thanks,
Mahesh.

Display authorization for particular line of table

Hi Experts,
I have a Z table contains sales area data. I want to display those records only which user has authorization for the sales area. It is possible through the table maintenance event or there is any other way to achieve this.
Quick response will be appreciated.
Thanks in advance for your sincere help.
Cheers,
Anil

Hi Anil,
Yes,Its possible through table maintainance event itself.
Only thing u need to do is check for the sales area the user is authorized..using
FM: SUSR_USER_AUTH_FOR_OBJ_GET
SEL_OBJECT:- CRM_ORD_OE.
Hope it helps!!
Regards,
PePe

Intercompany sales condition pi01

hi
how to Maintain Pricing Condition type PI01? for intercompany sales.please reply me.
thanks

Hi,
In inter company sales we have got two condition types one is IV01 ,PI01.
IV01 in contrast to PI01 is not marked as statically value.
Here condition type PI01 stands for FOR COST OF THE ORDERING COMPANY
IV01 is the revenue of the delivering company.
Here we maintain condition records for only for the PI01.
I hope it solve ur problem.
Regards,
venkataswamy

Reference Co.Code (COBK-REFBK) - Intercompany sales within the same CO Area

Hi gurus,
this is the scenario:
- One Controlling Area, eg CO01
- Two Company Codes, eg FI01 and FI02
- An intercompany sales flow
- A service order (CS order) as controlling object
All costs and revenues generated by both company codes are accounted on the unique service order created from the very beginning of the intercompany flow.
Eg:
- Cost of goods sold (booked by Company FI02)
- Revenues for intercompany sales (booked by Company FI02)
- Costs for intercompany purchases (booked by Company FI01)
- Revenues for sales (booked by Company FI01)
In CO standard report, eg KOB1 or S_ALR_87012993, all costs and revenues are shown. Checking deeper each single document you see that Company Code in CO documents is always FI01, while in FI documents the Company Code is recorded as the example above.
Checking deeper, you see that in CO documents you have (in COBK and in COVP) the detail of the Reference Company Code (that means the Co.Code of the reference FI document).
I'd like to use that information in order to segregate costs and revenues to have a view of the margin under a company code perspective.
Does anybody know if i can use in some way that field (REFBK), maybe through painters?
Thanks,
Enrico

Hi Enrico
I did some research... Fileld REFBK is not part of any reporting structure in GRCT
GRCT is the house of all report painter structures...
If you refer structures CCSS and RWCOOM in GRCT - It does not have table COBK (REFBK is part of table COBK)
May be you can try to add table COBK in the structure.. I dnt know whats the process of doing that..
If you use line item reports, you should be OK as REFBK will be available there...
Regards
Ajay M

How to configure intercompany sales

hi gurus,
can you please tell me how to setup an intercompany sales? i have 2 plants from diff company codes and they would like to have orders from each other. what are the things that i need to setup to be able to do this? and what are the recommended business process for this transactions? im thinking scheduling agreement would fit this setup?
thanks,
paul

hi,
Inter company sales and business processing
An Intercompany sale transaction takes place when a sale occurs & the selling sales orgn belongs to a different company code than that of the delivery plant.
Intercompany business processing describes business transactions, which take place between two companies (company codes) belonging to one organization. The ordering company orders goods from a plant, which is assigned to another company code.
Ordering company Supplying company
Company code: 5555 1000
Sale Organisation: 5555 PBIL
Distribution channel: 56 PW
Division: 58 GC
Plant: 5555 1000
Customer: 215 Product: Nimulid
Ent Stru- Assignment- SD- Assignment- SD- Assign Sales Orgn: Distbn Channel- Plant
Sales Orgn Distbn Channel Plant
PBIL PW 1000/ 5555
5555 56 5555/ 1000
SPRO- IMG- SD- Billing- Intercompany Billing:
o Define Order types for Intercompany billing
o Assign organizational units by plant
o Define internal customer no by sales orgn
Assign Sales Doc relevant for Intercompany billing
IVo POR
IVo OR
Assign Organizational Units by plant: assign sales area of ordering company to the delivery plant.
o 1000 5555 56- 58
Plant Descp Sales Orgn Descp Distbn Descp Division Descp
1000 5555 56 55
Define internal customer no by sales orgn: create the customer of the ordering company in the company code of the delivering plant, but with the sales area of the ordering the company
Sales Orgn Descp Customer Inter Comp Descp
PBIL 215
Pricing procedure: PI01 (Intercompany pricing)
Determination Rule: OVKK
PBIL PW GC A 1 RVAA01
PBIL PW GC I 1 ICAA01
VK11: PI01
Create Order: VA01: POR: 5555-56-58: customer- 215, product- Nimulid, supplying plant: 1000.
Delivery
Goods issue
Invoice for customer
Invoice Intercompany billing
Processing an Intercompany sale
To create an Intercompany sales transaction proceed with creating the standard sales order. In the sales order, change the delivering plant at the line item level & create a delivery for the new shipping point represented for the delivering plant. Proceed with the delivery functions of selecting the packing & posting the goods issue. Then create an external invoice that will be sent to the customer & create an Intercompany invoice. That will represent the billing doc between the delivering plant & the selling sales orgn.
An internal Intercompany invoice can be created by entering the delivery no again for processing when using the transaction VF01. One can also select the doc due for Intercompany billing by using the billing due list VF04. When using the billing due list be sure to select the Intercompany-billing doc as the documents to be used, by checking Intercompany billing.
A Check List for Intercompany sales processing can be the following:
The enterprise structure must be maintained correctly, i.e., the plants must be assigned to the correct company codes as well as to the correct combination of sales orgns & distbn channels.
The Intercompany customer must be assigned to relevant
sales orgns
The delivering plant must be assigned to the sales orgn.
The material to be sold must exist in the original & delivering plant.
The sales order must be relevant for Intercompany sales & have an assigned billing doc type
The copy control rules must be defined between the standard invoice, such as F2, & the inter company invoice, such as IV.
The pricing proc may have a special cond type assigned to it.
This special cond type may represent the price to
Intercompany sales orgn or it may represent a special discount offered to the Intercompany sales orgn for the material sold
The standard system has the following cond types:
To represent the Intercompany price as quantity-dependent.
To represent the Intercompany condition as percentage.
regards
sadhu kishore

Authorization for Intercompany Sales

Similar Messages

Maybe you are looking for