Authorize problem on iMac
Last Thursday, I purchased a Macbook to go along with my MBP and iMac. I wanted to add all my purchased content to the new Macbook so I had to deauthorize all five of the computers in my account to do so. I then authorized all three of my Macs. All three will play my music ok but my iMac will not play my purchased TV shows. I have deauthorized and authorized over and over again and they will not play. They did play before I had to deauthorize them last week.
What can I do to play my TV shows on my iMac?
Thanks
I think I just solved my own problem. After I upgraded to the latest version of iTunes, I never upgraded Quicktime and that is most likely why my videos won't play. It just shows a blank screen with no sound and the timeline advances as if the video were playing. I'm installing Quicktime now and I'm sure my problem will be fixed.
Similar Messages
-
So, I purchased an ATV2 at Heathrpw airport before I left UK as well as a cheap (£14.95) HDMI cable.
I wanted to use the ATV2 in my home in Switzerland and purchased a Sony Bravia TV to watch it on.
1. My first problem, when streaming content from my iTunes is that the ATV2 sometimes gets "disconnected" from the television, i.e. I see the blnk HDMI1 screen for a split second, then it reconnects.
2. Second problem is that after about 15 minutes of watching anything on my ATV2, the picture turns to a combination of pink and blue, the picture is still visible but i have never seens anything like this.
3. third and most annoying problem: I rented a movie directly from ATV2 last night (with my UK iTunes account), paid for it, and when it pops up on the screen saying it is ready to be watched, I pressed play but it loads, then authorizes and then a message appears that "this device is not authorized to play this content".
I thought that perhaps this was one movie, so I rented a second one. When that didnt work, I figured it may be because I am in Switzerland and using a UK iTunes account, so I logged into my swiss one and rented something else. To no avail!
*Things I have done to try and fix the problems*
1. I have authorized and de-authorized my computer
2. I have reset the ATV2 to its factory settings
3. I have tried Swiss as well as UK iTunes accounts to rent movies
This is increedibly frustrating and I hope someone can help! Thank you in advance!I too got an ATV 2 very recently. From my iMac I can order movies and watch them (as well as music, etc.). From my MacBook Pro I can do all except stream movies. Every time I try something new on the MacBook Pro (I keep buying the same two movies, so "they" know I am sincere), I get authorization problems.
1. REMOTE: I can preview but not watch ATV 2 movies using the remote: "your apple tv is not authorized to play this content."
2. MACBOOK PRO: I cannot use my macbook pro itunes to order and watch movies (music yes, movies no): "Authorization is required..." even though I have authorized/reauthorized the laptop 10 times. And I have reset/restored ATV 2.
3. IMAC: I can use my iMac itunes to order movies. I then choose that computer on the ATV 2 screen and movies stream. -
recd following error when attempt to open ebook using ADE 4.0 : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5 Chrome Version 37.0.2062.124
chat with customer service at book company i purchased file:
"Me: I installed the proper adobe software, adobe digital editions 3.0 (now have updated to 4.0) on my mac running os 10.85 however I am getting the following error code when i try to open the file:
"Error getting License. License Server Communication Problem:
E_LIC_LICENSE_SIGN_ERROR"
Charles P.: Okay, what you need to do unfortunately, is contact Adobe at http://www.adobe.com and they will need to get your license issue resolved.
Charles P.: Is there anything else I can assist you with today?
Me: title of error is Unable to Download
Me: i dont see how that would be an adobe problem?
Charles P.: I understand, but it appears that the reason for the download issue is because of the license error the license is related to the Adobe Digital editions software. I understand how this could be confusing but it's due to the authorization of the ADE software. Adobe would need to correct your account issue with the license
Me: ok but i thought this was a free license from adobe??!! this is just a digital editions reader, right??
Charles P.: That is correct it is a free license but your account has to be associated with one license and yes the Digital edition is a ebook reader that our ebooks use for you to viewWell, just for the halibut I tried opening the book again today and , GLORY BE!, it worked.
Guess it may have taken overnight for Adobe to OK my license to their free ADE software. Also works now using Bluefire app as the reader on my android phone, although it was a pain
to get the book file in the right file folder for bluefire to see it.
I hope that time also heels the issue with all other Error Getting License users.
panman -
HT203604 How do I authorize a new iMac to access purchases
How do I authorize a new iMac to access purchases with my apple ID in App store??
iMac 27" Intel Quad i5/2.7Ghz
(iMac 12.2-i5) Model A1312
8g RAM 1Tb HD
Yosemite 10.1.1
App Store V2.0Sorry for late reply... I should have been more specific, for I had tried to authorize my new iMac several times without success... Realized I needed to de-authorize a much older mac that was in another room. Then ~ yup, problem solved.
-
hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m
my problem is
imac works fine in safe mode,
but when you try to startup normal it's connstantly restart by it self.in safe mode works perfectly,soon as I try to boot in normal mode it's keep restarting.on screen I don't see any line vertical or horizontal picture look normal on safe mode.but unable to start normal it just restarting over and over.I try another HDD but same things happen,I replace memory but still same.works ok in safe mode but not in normal mode.I will try to post system error report.
-
I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB)
I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB). When I play video formats like xvid, mkv, avi iMac freezes and emits horrible sound,in service said the problem is not overheating. Not a problem with memory or hard disk because I placed second correct parts.The same problem is with OSX 10.6.8 and 10.8.4 and other players.Apple hardware test found no problem and tech tool pro found no fault.
After five days of testing in the service they can not found fault and it was decided to change the graphics card.
New graphics have been tested for two days but it is not reproduced divx ... but their test software which did not find any fault on the old graphics...
Do I have the right to complain if repair does not fix the problem because I use non apple softwere and video formats.You could look at the System Profile for the info it presents for the card. But why wouldn't you think it's not up to date if you have the latest install (according to your sig above)?
What program are you trying to run? Is there anything in the system log?
I think it's the program that's having the problem and not anything with your video software. -
Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank youLately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV. -
How I fixed my authorization problem
There have been many posts on the authorization problem that has cropped up since the latest update of iTunes, and there doesn't seem to be universal cure. I fought it myself for a couple of weeks, and recently fixed it on my PowerBook and thought I would share it with others.
The common theme here seems to be that it affects people who have had more than one account in iTunes. For the record, I have NEVER purchased music from the iTMS using a different account, so I was confused as to why this was happening to me.
I have two Macs in play here: an older eMac at home and a PowerBook G4. My initial iTunes library started on the eMac, and then I moved it to my PowerBook a little over a year ago when I bought it. I purchased music from the iTMS on both Macs, using the exact same account.
When I upgraded iTunes on my PowerBook, I reauthorized using my only account, and the music that I had purchased since I transfered my library worked just fine. The music that I had purchased on my eMac simply would not authorize!
It dawned on me yesterday that I setup a .mac account on my PowerBook several months ago, although I never used it in the iTMS and I never used it on the eMac at home. I also realized that I had NOT run iTunes on the eMac since the most recent upgrade.
I installed the iTunes upgrade on my eMac, and proceeded to authorize it with my only known iTMS account. No issues, and all purchased music was auhtorized, including songs that would not play on my PowerBook.
On my PowerBook, I decided to authorize using my .mac username and password, even though I have NEVER used it to purchase music. I didn't even own that account when the music files in question were purchased. As I suspected though, the authorization went through and I can now play all of my purchased music from iTMS.
When I try to step through this logically, it makes my head hurt. There is definitely a major problem with Apple's DRM authorization relationship somewhere, as there should be no reason at ALL for any of my music to require my .mac account.
I don't know if this will help anyone, but if you're struggling with it and you have a .mac account, give it a shot and it might work.The fact that you saw no glitches while running Logic before applying the update means almost nothing because that uses only a small subset of system resources. Far more significant is that Safe Mode restored some missing functionality: because it disables non-essential items like user fonts, third party drivers, & so on, it points to problems in those areas.
Equally significant, the fact that there are relatively few reports of post-update problems among the several million Snow Leopard users points away from the update itself as the cause of your problems.
Separate & apart from that, it so happens that I'm a sound engineer/system designer/board operator with nearly 40 years of professional touring experience. FWIW, I never have & never will update the software of any system I must rely on professionally (whether it is running on a Mac, a PC, or dedicated hardware) unless & until I can thoroughly test it first and I have a trustworthy backup/recursion strategy to fall back on in case of problems.
I strongly suggest you learn from your unpleasant experience & do the same. I have had far fewer problems with Macs than with PC's, but nothing is 100% reliable to begin with. Changing the OS software part way through the tour is just asking for trouble, no matter how reliable that has been in the past. Even if the budget allows for nothing better than a stack of burned CD's & a couple of consumer grade CD players, no professional tour can afford to be without some fallback strategy in place. That should be self-evident & require no warning from Apple or anybody else. -
Authorization problem when using the Transaction Launcher
Hi All,
We have an authorization problem when we call a transaction (EL37) in ECC from the IC Web Client.
We believe that we have done all the necessary customizing in CRM and when we press the link in the Navigation Bar we are asked to logon to our ECC system. After logging on, we get an error message saying that "You do not have authorization for transaction EL37". If I then enter the transaction directly in the white command field in top of the ECC screen, then I have no problem calling the transaction.
My user has SAP_ALL, so it shouldn't be a problem with the authorizations. Maybe it has something to do with the transaction IC_LTXE? I have also tried to add this transaction to my user profile, but that didn't help.
Does anyone have a suggestion for how to fix this problem?
Kind Regards,
Gitte.Hi,
I have found the solution for the problem myself. The transation code in the Transation Launcher Wizard must be written in capitals! We had entered 'el37' and have now changed it to 'EL37'.
Best Regards,
Gitte. -
How to deal authorization problem in KE30
Hi to all
Please tell me how to deal authorization problem in KE30.
My requirement is to restrict report based on sales office so that other region's emplyee can't be able to see different regions sales data.
Please guide me on this issue.
Thanks & Regards
Anubhavclosed.
-
Problems with iMac retina 5K (artifacts, glitches and etc.)
Hello dear Apple.
I have bought new iMac with retina 5K display and I have found lot of problem with it. It was December 2014 when I got my first iMac. And after then I have found few real problems with it.
The first problem is I can't open high resolution image with standard Preview.app. I mean 'high resolution' - more then 30-40 megapixels. When I open them, I can see image, but only 2-3 seconds, and after that I see horizontal artifacts only. I can't open images, like this Rembrandt.jpg; Carpaccio.jpg; Holbein.jpg
The second problem, when I change resolution in to scaled mode (System Preferences/Display) for increase image on display. I found when select some area on background of desktop it has left some lines after itself. It is particularly unpleasant if you have plain colour desktop background. You can view, how does it look here.
The next problem with animation in different parts of interface, e.g. sometimes when I open Time Machine some parts of windows are freezing or appear some artifacts or glitches near borders of window. And I have the same situation, when I open Mission Control, or any Adobe app or other, or simply rename a files. I have found few discussions with problems like mine, but in the separate places
5K iMac - bad GPUs?
Graphic Problems with Retina iMac
iMac 5K and indesign glitch
And after that I want to tell you that I have this problems on four (4) iMacs. It was really difficult to arrange four replace. I have lost a lot of time an spent a lot of nerves for discuss and resolve my problems with Apple support. Finally, they told me that they do not know about problems with iMacs, and they could offer give my money back. I glad to get my funds, but now in my country price for iMacs has doubled. And if they refund my money, I can buy half new iMac only.
I am sorry for my language and style, but I do not know what I should doing with that. And should I hope, that my problem resolve with OS X updates? Or it is hardware problem of the whole iMacs 5K...Yes Ralph, absolutely correct, 4 times. Do you have the graphic card the same as me, or m290? Could I ask you check your iMac for few things, please?
For the first, can you enlarge scale in System preference/Display and install plain dark color desktop background. Are there any footprints after rectangular selection like in my video https://youtu.be/dBglFvjJx1Q?
And for the second, could you download this image https://upload.wikimedia.org/wikipedia/commons/0/07/Rembrandt_Harmensz._van_Rijn _-_Nachtwacht_-_Google_Art_Project.jpg and open in plain Preview.app, and zoom it? Are there any glitches?
Thank forward. -
Extended Notification authorization problem
Hi All,
We configured extended notification for all the workflow in ECC 6.0.
We have been moved to production system. When users selecting the workitem link in the outlook, they are getting an authorization problem saying that 'You don't have an authorization to execute SWNWIEX'.
However, with this transaction the user can execute the ANY workitem just by entering the Work item id. The transaction does not check if the work item is actually in the users inbox, I would think this could be a security issue.
could you anyone please help me out.
-SteveHello,
I don't think giving access to tx SWNWIEX allows all users access to all workitems.
Where did you read that? It could be the case for your account, but not everybody's.
Test it out.
regards
Rick Bakker
Hanabi Technology -
BI Authorization problem query in web
Hello Guru,
i have authorization problems to execute query on the Web.
When i try to execute query on web i have these messages:
- Missing display authorization msg R9 108
- Missing authorization to execute query msg R9 108
- User doesn't have authorization for selected component
Component selected can not be executed
Contact person responsible for the authorizations if user need authorization to execute this component
Function is checked with object "Business explorer - components" with these fields:
- InfoCube ZSD_007
- Component type ERP
- Component ZTEST_SD_007
- Activity 16
Message number BRAIN 800
In BI i have add to my usere all these profiles and role, but the problem still again:
Profiles:
SAP_ALL
S_A.SYSTEM System administrator (Superuser)
S_RS_ADMWB_A All Administrator Workbench Authorizations
S_RS_EXPL_A All Business Explorer Authorizations
T-BS590005 Profile for role Z_RS_RREPU
T-BS590006 Profile for role Z_RS_RREDE
Roles:
SAP_BW_CFO_ADMIN
Z_RS_RREDE (copy from template RS_RREDE)
Z_RS_RREPU (copy from template RS_RREPU)
I can not understand if this problem is related to BI authorization or maybe something in Netweaver
please help me
Kind regards
BorisHello,
i can execute query from transaction RSRT, anyway also from this transaction when select "ABAP WEB" , web page is open but i have same authorizations problem.
In transaction SU53 seems everithing correct (i have all authorizations) .... this is probably becouse my problem is in Portal or netweaver side and not in BI ???
any suggestion?
Thanks in advance
Boris -
URGENT: Authorization Problem with SolMan 4.0
Hi all,
I'm still configuring the SolMan 4.0 . I did all the basic customizing but still have an authorization problem. If I want to create a new support message and want to choose the System/IBase, i get the message "no authorization". And the "KeyUser"-User or "FirstLevelSupport"-User even cannot open the transaction "notif_create".
I tried randomly some roles without any proper results:
SAP_OP_DSWP
SAP_RMMAIN_EXE
SAP_SCDT_ALL
SAP_SCDT_DIS
SAP_SCIDM_ALL
SAP_SCIDM_DIS
SAP_SCOUT_ALL
SAP_SETUP_DSWP
SAP_SMSY_ALL
SAP_SMSY_DIS
SAP_SOL_AC_COMP
SAP_SOL_KW_ALL
SAP_SOL_PM_COMP
SAP_SOL_PROJ_ADMIN_ALL
SAP_SOL_PROJ_ADMIN_DIS
SAP_SOL_SERVTRANS_CREATE
SAP_SOL_TRAINING_EDIT
SAP_SOL_TRANSPORT_DIS
SAP_SOL_TRANSPORT_EXE
SAP_SOLAR01_ALL
SAP_SOLAR02_ALL
SAP_STWB_2_ALL
SAP_STWB_INFO_ALL
SAP_STWB_SET_ALL
SAP_STWB_WORK_ALL
SAP_SUPPCF_ADMIN
SAP_SUPPCF_PROCESS
SAP_SUPPDESK_ADMIN
SAP_SUPPDESK_PROCESS
SAP_SV_FDB_NOTIF_BC_PROCESS
SAP_SV_SOLUTION_MANAGER
The "KeyUser" has the Roles:
SAP_SUPPCF_CREATE
SAP_SUPPDESK_CREATE
The "Processor" has the roles:
SAP_SUPPCF_PROCESS
SAP_SUPPDESK_PROCESS
Has anyone an idea??
Best Regards
PhilippHi Phillipp,
did you do the step 1.4 from service.sap.com/solutionmanager media library technical papers Service Desk: Additional Information ? You have to create the ibase ....
Lando
P>S> Don't forget the points if this answer is hepfull -
Authorization Problem (I am Using Authorization For Custom Forms)
Hi All,
I am Using Authorizations To My Forms (I created One Addon For This Addon I am Using Authorization).I created Authorization For My Addon But While Working It Showing Some Errors
. In My Addon Four Forms are there For this four forms I am Using Authorization based on usres some screens only super user can access. normal user he is not a super user he cliekd on that authorization form it shows one message Your not a authorized user to permitted this operation in this message box we have two butons one is ok button and one is Authorized by another user . When i clicked on Ok Button I am getting error Internal error (-10) occured [131-183]. Please give me Your Valable Suggestion.
I am waiting for your Reply.
Thanks & Regards
NareshI am using Sap Authorizations For My Custom Form See The Code Also U Can Get Clear Idea
Private Sub CustomAuthorization()
Dim li_RetVal As Integer
Dim pUserPer As SAPbobsCOM.UserPermissionTree
Try
pUserPer = Me.SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserPermissionTree)
'Purchase Indent
If pUserPer.GetByKey("NHCL_PM") = False Then
pUserPer.PermissionID = "NHCL_PM"
pUserPer.Name = "Purchase Module"
pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
li_RetVal = pUserPer.Add()
End If
'Purchase Indent ->New Purchase Indent
If pUserPer.GetByKey("NHCL_PM_NPI") = False Then
pUserPer.PermissionID = "NHCL_PM_NPI"
pUserPer.Name = "New Purchase Indent"
pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
pUserPer.ParentID = "NHCL_PM"
pUserPer.UserPermissionForms.FormType = "2000010002"
li_RetVal = pUserPer.Add()
End If
'Purchase Indent->View For Approval
If pUserPer.GetByKey("NHCL_PM_VIE") = False Then
pUserPer.PermissionID = "NHCL_PM_VIE"
pUserPer.Name = "View For Approval"
pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
pUserPer.ParentID = "NHCL_PM"
pUserPer.UserPermissionForms.FormType = "2000010003"
li_RetVal = pUserPer.Add()
End If
'Purchase Indent ->Selection For RFQ
If pUserPer.GetByKey("NHCL_PM_SEC") = False Then
pUserPer.PermissionID = "NHCL_PM_SEC"
pUserPer.Name = "Selection For RFQ"
pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
pUserPer.ParentID = "NHCL_PM"
pUserPer.UserPermissionForms.FormType = "2000010006"
li_RetVal = pUserPer.Add()
End If
'Purchase Indent ->Purchase Quotation
If pUserPer.GetByKey("NHCL_PM_PUR") = False Then
pUserPer.PermissionID = "NHCL_PM_PUR"
pUserPer.Name = "Purchase Quotation"
pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
pUserPer.ParentID = "NHCL_PM"
pUserPer.UserPermissionForms.FormType = "2000010007"
li_RetVal = pUserPer.Add()
End If
'Purchase Indent ->Final Quotation
If pUserPer.GetByKey("NHCL_PM_FIN") = False Then
pUserPer.PermissionID = "NHCL_PM_FIN"
pUserPer.Name = "Final Quotation"
pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
pUserPer.ParentID = "NHCL_PM"
pUserPer.UserPermissionForms.FormType = "2000010008"
li_RetVal = pUserPer.Add()
End If
Catch ex As Exception
Dim ErrCode As Long
Dim ErrMsg As String
Me.SBO_Company.GetLastError(ErrCode, ErrMsg)
Me.SBO_Application.StatusBar.SetText("Authorization Problem" & ErrCode & li_RetVal, SAPbouiCOM.BoMessageTime.bmt_Short)
End Try
End Sub
Maybe you are looking for
-
Hi All, Can somebody explain me about TAX When VAT is applicable & when CST is applicable. when both VAT+CST is applicable. and what are the tax percentage applicable.
-
USB to SCSI Adapter - Anyone have one?
I'm trying to find one that works. I need to connect an Epson Expresson 836XL large format scanner to my iMac, and this is the only way. I'm looking for an OS 10.5.x compatible adapter that has a 50 pin SCSI interface on one side and (USB 2 preferrab
-
Airport network not joining automatically
After changing out a modem and reconfiguring the airport extreme, all computers in the house (including iPhones and and a windows computer automatically connect to my home network, EXCEPT my G5, which says none of my preferred networks is available;
-
In my older version of photoshop when I went to print my Print Dialogue box gave me options which I can not find on CS6. With my older version under Print Settings the drop down menu for papers included; photo paper glossy and I also had options for
-
Does anyone know how to klick on a button in one movie and than go to another movie AND come to a certain frame?