Auto Assignment of Business Place in Sales Orders

Dear Experts,
So far my knowledge a business place can be assigned to sales office and if the sales document is with some VAT Tax code it takes business place automatically.
But I have sales which is free of tax. Please advise how to assign business place automatically for these tax free sales.
Thanks,
Deb

Hi,
Is there any requirement for which you need business place for non taxable sales. You can try substitution using tax code and deriving the business place.
Regards
Milind Sonalkar

Similar Messages

Business Place in Sales Order

Dear Experts,
So far my knowledge a business place can be assigned to sales office and if the sales document is with some VAT Tax code it takes business place automatically.
But I have sales which is free of tax. Please advise how to assign business place automatically for these tax free sales.
Thanks,
Deb

Hello
Kindly refer following links:
- business place & section code
- Business Place & Section code
- [Creating and Processing Tax Invoices (Business Places) |http://help.sap.com/saphelp_46b/helpdata/es/86/bf0d38fca1de10e10000009b38f8cf/content.htm]
- [Tax Invoices for Output VAT/Input VAT |http://help.sap.com/saphelp_bw/helpdata/en/c1/e60d38d89d6454e10000009b38f8cf/content.htm]
- [Separate Billing Documents for Different Business Places|http://help.sap.com/saphelp_470/helpdata/pt/da/3e3c3c8b334f24e10000000a11405a/content.htm]
Regards
JP

Assignment of Business place to Plant

Hi,
Can you please tell me where is option for assignment of Business place to Plant
Regards,
Yadayya

Hi,
If the business place is assigned to a plant, the system derives the business place from that plant when you post a document through Materials Management (MM) or Sales and Distribution (SD). Similarly, if the business place is assigned to a sales office, the system derives the business place from that sales office when you post a document through SD.
http://help.sap.com/saphelp_dimp50/helpdata/en/36/41913ab525fb23e10000000a114084/content.htm
use above it may help
BR,

Why did not I got assignment of Business Area by sales Area

Hi Experts,
Can anybody please tell me,
Why did not I got assignment of Business Area by sales Area in following path.
IMG -- Enterprise Structure -- Assignment -- Sales and Distribution -- Business Area Account Assignment -- Assign Business Area by Sales Area.
Please help.

HI,
For business area assignment to Sales Area there the Steps u need to follow.
1.Define Business Area
2.Then maintain Consolidated business Area
3.Now in Assignment in Define rule by Salee Area u have to select Rule 002 which indicate
Rule 002 Business area determination from sales area Table use (TVTA)
Then u will find the data in Assign business Area by sales Area Screen & u can fill the business area there .
I hope this will help u
Regards
Deepak

Q: Extract additional business partner of sales order

Hi experts,
In ECC we have an additional business partner on sales orders, does anyone know the best way to extract this data to BW? As far as I can find you have to customiz the LIS extractor in ECC in order to get this data.
Any suggestions?
Thank you in advance,
Mikael

Hi Gustavo,
We have found out that there are no suitable BTE for VBPA extraction. We therefore decided to go in another direction;
A custom datasource based on a function module that extracts the data from VBPA using update date from VBAP to trigger the delta. This solution might not be perfect, but if is sufficient for our business scenario.
This posts describes how to do it:
LIS User Exit MCS10001 and VBPA table (Roberto N. read me!)
Best regards,
Mikael

Why we should assign Profitability Segment Number in sales Order

Dear Gurus,
Can any one tell me why we should assign profitability Segment Number in Sales Order?
While i am createing the sales order system is asking to assign profitability Segment Number and WBS Element. Even though there is no specific assignment of these fields for incompletion log.
Can anyone tell me what exactly is the functionality behind this Profitability Segment number?
Good answers are rewarded with points
Thanks and Regards
SAP SD
Yoganand

Hi,
If CO-PA is active settlement transfer the costs and revenue of the sales order item to profitability segment in CO-PA, if not active it gets transferred to G/L account in FI.
Regarding functionality of Profitability segment - Need to specify Characteristics in CO-PA for profitability segments and these characteristics are used for Information system and planning. Charcteristics which are not involved in profitablity segment remains in the line item of CO-PA. In essence charcteristics decides on profitablity segments.
Regarding removal of Profitablity segment no in Sales order .Kindly refer back to the earlier threads.
Thanks & Regards
Madhu

Is there a Business Object for Sales Order Create and Change VA01 and VA02

Hi experts -
I am looking for a business object for Sales order create and change VA01 and VA02 respectively?
Thanks,
Mark

Hi Mark,
I think this question is best answered in [SAP Solutions|/community [original link is broken]; Forums.
- Subhodeep
Edited by: Subhodeep on Aug 29, 2009 11:14 AM

BOM business requirement for sales order and PGI

Hi Experts,
Current setting
The BOM structure is A = A1+A2
1) Material A created in MM master item category group = ERLA
2) Sub component material A1 and material A2, MM master item category group = NORM for both component.
3) Maintained in CS01 BOM header is A and items are A1 and A2.
4) Item category in IMG was created and assign item category also created.
    4.1) OR-ERLA-TAQ-TAE
new business requirement as listed below.
5) The material A is alway zero quantity on hand, no goods receipt required with no physical with such material or package at all. (it is dummy material number in SAP).
6) while SO created.
    6.1) Fro material A sales price captured at BOM header level only, NO QTY and COSTshow in the sales order.
     6.2) Material A1 and A2 are actual physical inventory item in the ware house.
     6.3) The sub component of material A1 and A2 is required to captured QTY and COST. NO SALES PRICES NEEDED.
CONCLUSION
HOW to setup/configure such a business scenario?
- Is it logic to configure as OR-ERLA-TAE-TAN that's what i think of?
My problem is how to make the material A is alway ZEROS stock on hand and allow in sales order creation with ZEROS order qty?
MATERIAL                                          QTY                             COST                                  SALES NET VALUE
       A                                                      0                                   0                                              1,500.00
       A1                                                    1                                  100.00                                           0
       A2                                                    1                                    50.00                                           0
Thanks & Regards,
Yong Kok Wah
Edited by: Yong Kok Wah on Jan 27, 2010 11:16 AM

As per your post,
- You are creating Main item which is a dummy material without any physical inventory maintained, but the pricing/billing should be done @ main item level.
- here you are not dispatching main item, but billing should be carried at this level. in such case, I suggest you to go with the new sch.line cat w/o maintaining any mov type to it. & use Zitem category for this main item in VOV7, mark "Order qtty=1" so that min order qtty for this main item should be 1, so that you can calculate price.
- You want to capture Cost of sub items , summation of sub items cost is total cost of main item & Profit will be calculated accordingly.
Sub items, sch.line category should have mov type, item cat should be not relevant for pricing & billing , but relevant for sch.lines. In Copy control from delivery - Billing @ item level, for the main item ,- item category, choose "Cumulate cost", so that cost of the sub items will be cumulated to main item.
eg:
MATERIAL QTY COST SALES NET VALUE
A 0 0 1,500.00
A1 1 100.00 0
A2 1 50.00 0
My problem is how to make the material A is alway ZEROS stock on hand and allow in sales order creation with ZEROS order qty?
To avoid this, mark order qtty=1, in item category for main item, but for the same item, sch.line category should not have mov type. so that there will nt be any PGI document. But PGI should be done for sub items to capture inventory & cost.
Test & revert, if any issues.

Question about: Auto PO generation for third party sales order

Hi all,
Not sure if this is the right place to leave this question but giving a shot.
In Sales Item category we have a check box called generate auto po. By reading the help i came to know that it generates PO and/or Purchase Requisition automatically on saving the Sales Order. It is also said that we need to make some ALV setting. Can any one lead me how to configure the setting,so that i can be successful in knowing about Third party Orders.
Thanks & Regards
Mukund

Hello Mukund
It is talking about ALE- Application Link Enabling - not ALV. That is if you have distributed applications and use ALE to communicate between them. I don't think you need to do anything else. Just go ahead and test it. And if your MM Purchasing master data is set up correctly, you should be able to see the message about PO creation when the sales order is saved.

Account assignment with business Place

Hello Gurus,
Can any body say me the Process of account assignment with bsiness place
Please the path and the tcode.
I have checked the FTXP OB40, OBYC

Dear Joydip
When posting a taxable document in the financial accounting application, the document must be assigned to the business place which eventually reports the VAT to the tax authorities. Therefore the R/3 System contains the field business place in every tax relevant transactions.
The business place is a obligatory entry field in the posting screen whenever a document is posted and has a tax code (only for Korean Company Codes). Only one business place per document is allowed, even if a company has to issue Tax Invoices between business places (Stock transfer between plants which are different business places). How to handle the VAT between business places will read VAT on Stock Transfers between Business Places.
The business place can be customized in the IMG.
You enter only a part of the financial documents directly through FI. Most of the documents are transferred to financial modules from other integrated SAP modules. When passing taxable transactions to the FI module, the field business place must be correctly filled with the key of the responsible business place. To achieve this, the other modules have to be configured.
Materials Management
The plant is the central organization unit in Material Management. Material movements always occur either within one plant or from one plant to another. By allocating the business place to the plant, we can determine the business place that purchased the material. If plant 0001 is allocated to business place BP01 and plant 0002 is allocated to business place BP02, then the movement of material between plant 0001 and plant 0002 is also a movement between business place BP01 and business place BP02.
The section code cannot determined by the plant automatically. The section code as a reporting unit for withholding tax has to be entered manually for each invoice by using the Logistic Invoice Verification. The section code can be found in the Document header of the invoice (Logistic Invoice Verification).
The 'normal' Invoice Verification does not support the allocation of the business place and section code!
Sales and Distribution
Similar to the MM module, goods are managed on plant level. When goods are sold, the system can determine the delivery plant. This plant is stored in the SD document. When a billing document is passed to the financial accounting application, the system reads the business place assigned to the plant and writes it into the document. The allocation between plant and business place can be done in the IMG.
Asset Accounting
Asset transactions are posted automatically from the Fixed Asset module to the FI module. To indicate which asset belongs to which business place in the FI-AA module, the 4-character evaluation group fields are used. One of the available evaluation groups (4-character) must be determined for the use as the business place. In this chosen evaluation group in the asset master data you have to enter the business place. In the screen layout rule for the asset master records, the 4-character evaluation group should be configured as a mandatory field. But before entering the business place in the asset master data you should customize all business places in the chosen evaluation group. You find this transaction in the IMG. Financial Accounting --> Asset Accounting --> Master Data --> User fields --> Define 4-character evaluation groups.
Thanks
G. Lakshmipathi

The material account assignment group is missing in sales Order creation

Hi Gurus,
When creating the sales order the material account assignment group is not copied in the sales order line item.
For eg: when the sales order has 5 line item for one of the line item the material account assignment group is not getting copied.
I checked the material master - A/C assignment group was maintained.
I checked the revenue account determination every entry is maintained with respect to GL account.
But even though while creating the sales order the line item does not have account assignment group. Due to this i could not able to release the billing doc to accounting.
Please if any one can help in this regard to solve why the account assignment group is not copying in the sales order line item while creating.
Thanks in advance.
Jack

Hi,
May be the system is not updating the data. Try creating a new sales order to check. Also check the division of the product for which the acct *** grp is not showing.
Check whether the acct assgt group which you have maintained in the matl master and that in the acct determination (VKOA) is the same.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil

OM: Disable auto refresh check box in Quick Sales Order Form

hi,everyone
In screen [Quick Sales Order Form],
we want to let the auto refresh check box always be checked and can not be updated with Form personalize.
I didn't find the item in this form,
and i konw that there is a value which defined in the Profile : [OM: Quick Sales Order Form: Auto Refresh](ONT_QUICK_OE_AUTO_REFRESH).
Can anyone give me some suggestions?
thx for ur help.

hi,Pradeep
Thanks for your reply.
Actualy,the profile "OM: Quick Sales Order Form: Auto Refresh" has been setted into 'Line' firstly as we want to auto-refresh order lines.
So the 'auto refesh' checkbox is checked with default value in the screen,
but the order line would not be auto-refreshed when user uncheck the checkbox manually.
So we want to disable or invisible the 'auto refesh' item in the screen with form personalize,
the problem is i can not find the item or the block in the form.
Or is there any suggestions to archive this?
Can you please help me?
Thanks,
Leno
Edited by: Leno Sun on 2013/05/07 19:35

User exit or BADI for business area in sales order

Hi,
At present the business area in the sales order is greyed.i want to remove the greyed field and put some input value to the business area when a new sales order is created....
Please suggest the user exits or BADIS
Kanishak
Edited by: Kanishak Gupta on Feb 4, 2010 1:06 PM

Hi Kanishak
You can use userexit userexit_cobl_send_header
If you overule the settings, you will be able to enter business area ( GSBER )
Also, try out:
userexit_cobl_receive_vbak to transfer the screen value entered by the user back to vbak-gsber.
If item level is also necessary you also need :
userexit_cobl_send_item
userexit_cobl_receive_vbap
Hope this helps.
Harsh

Auto Assigning of Business Partner to a task

Hi Champions,
I have a situation where I have to assign a business partner as soon as joining happens to a default task and default role of the project through ABAP program.
I have been able to achieve the auto allocation of the business partner to default role using the BAPI BAPI_BUS2177_STAFFING_ADD. This creates a link in DPR_BUPA_LINK table also.
Now I am stuck as to how to assign this business partner to the default task. Which BAPI shall I use and what shall I pass as input to it achieve this.
It will be great help on hearing from on this.
Regards, Sandeep

Hi
Logic can be like this:
Get GUID of Task of which is going to be default.
Once employee (BP) is created, the program (scheduled at backend) will run n use the FM u mentioned.
Niranjan
Let me know if you need more info !!!

Business Event when Sales Order is Booked....Custom Business Requirement

Hello,
I have business requirement like when a sales order line is booked/ Item is Received in Inventory/ Line is Cancelled , I need to update quantity,price for that customer and item# in a custom table.
So what is the best approach to do it..Is it making use of business events or Alerts or any other approach?
If business events, can you please tell me what are the business events and how to find out event parameters for the following
1. When Sales order Line is Booked
2. When Item is Received in Inventory
3. When Account Alias Receipt is Done in Inventory
Please advise.
Thanks,
Sridhar

Check these links
https://forums.oracle.com/thread/2337912
https://forums.oracle.com/thread/976272
https://forums.oracle.com/message/2427841
I don't recommend alert as the alert is fired during every record update. If you have modified the OM workflow, then you can achieve your requirement by adding a new node/function in the workflow to update the custom table.
Thanks
Shree

Auto Assignment of Business Place in Sales Orders

Similar Messages

Maybe you are looking for