Business Place in Sales Order

Dear Experts,
So far my knowledge a business place can be assigned to sales office and if the sales document is with some VAT Tax code it takes business place automatically.
But I have sales which is free of tax. Please advise how to assign business place automatically for these tax free sales.
Thanks,
Deb

Hello
Kindly refer following links:
- business place & section code
- Business Place & Section code
- [Creating and Processing Tax Invoices (Business Places) |http://help.sap.com/saphelp_46b/helpdata/es/86/bf0d38fca1de10e10000009b38f8cf/content.htm]
- [Tax Invoices for Output VAT/Input VAT |http://help.sap.com/saphelp_bw/helpdata/en/c1/e60d38d89d6454e10000009b38f8cf/content.htm]
- [Separate Billing Documents for Different Business Places|http://help.sap.com/saphelp_470/helpdata/pt/da/3e3c3c8b334f24e10000000a11405a/content.htm]
Regards
JP

Similar Messages

  • Auto Assignment of Business Place in Sales Orders

    Dear Experts,
    So far my knowledge a business place can be assigned to sales office and if the sales document is with some VAT Tax code it takes business place automatically.
    But I have sales which is free of tax. Please advise how to assign business place automatically for these tax free sales.
    Thanks,
    Deb

    Hi,
    Is there any requirement for which you need business place for non taxable sales. You can try substitution using tax code and deriving the business place.
    Regards
    Milind Sonalkar

  • Q: Extract additional business partner of sales order

    Hi experts,
    In ECC we have an additional business partner on sales orders, does anyone know the best way to extract this data to BW? As far as I can find you have to customiz the LIS extractor in ECC in order to get this data.
    Any suggestions?
    Thank you in advance,
    Mikael

    Hi Gustavo,
    We have found out that there are no suitable BTE for VBPA extraction. We therefore decided to go in another direction;
    A custom datasource based on a function module that extracts the data from VBPA using update date from VBAP to trigger the delta. This solution might not be perfect, but if is sufficient for our business scenario.
    This posts describes how to do it:
    LIS User Exit MCS10001 and VBPA table (Roberto N. read me!)
    Best regards,
    Mikael

  • Is there a Business Object for Sales Order Create and Change VA01 and VA02

    Hi experts -
    I am looking for a business object for Sales order create and change VA01 and VA02 respectively?
    Thanks,
    Mark

    Hi Mark,
    I think this question is best answered in [SAP Solutions|/community [original link is broken]; Forums.
    - Subhodeep
    Edited by: Subhodeep on Aug 29, 2009 11:14 AM

  • BOM business requirement for sales order and PGI

    Hi Experts,
    Current setting
    The BOM structure is A = A1+A2
    1) Material A created in MM master item category group = ERLA
    2) Sub component material A1 and material A2, MM master item category group = NORM for both component.
    3) Maintained in CS01 BOM header is A and items are A1 and A2.
    4) Item category in IMG was created and assign item category also created.
        4.1) OR-ERLA-TAQ-TAE
    new business requirement as listed below.
    5) The material A is alway zero quantity on hand, no goods receipt required with no physical with such material or package at all. (it is dummy material number in SAP).
    6) while SO created.
        6.1) Fro material A sales price captured at BOM header level only, NO QTY and COSTshow in the sales order.
         6.2) Material A1 and A2 are actual physical inventory item in the ware house.
         6.3) The sub component of material A1 and A2 is required to captured QTY and COST. NO SALES PRICES NEEDED.
    CONCLUSION
    HOW to setup/configure such a business scenario?
    - Is it logic to configure as OR-ERLA-TAE-TAN that's what i think of?
      My problem is how to make the material A is alway ZEROS stock on hand and allow in sales order creation with ZEROS order qty?
    MATERIAL                                          QTY                             COST                                  SALES NET VALUE
           A                                                      0                                   0                                              1,500.00
           A1                                                    1                                  100.00                                           0
           A2                                                    1                                    50.00                                           0
    Thanks & Regards,
    Yong Kok Wah
    Edited by: Yong Kok Wah on Jan 27, 2010 11:16 AM

    As per your post,
    -  You are creating Main item which is a dummy material without any physical inventory maintained, but the pricing/billing should be done @ main item level.
    - here you are not dispatching main item, but billing should be carried at this level. in such case, I suggest you to go with the new sch.line cat w/o maintaining any mov type to it. & use Zitem category for this main item in VOV7, mark "Order qtty=1" so that min order qtty for this main item should be 1, so that you can calculate price.
    -  You want to capture Cost of sub items , summation of sub items cost is total cost of main item & Profit will be calculated accordingly.
    Sub items, sch.line category should have mov type, item cat should be not relevant for pricing & billing , but relevant for sch.lines. In Copy control from delivery - Billing @ item level, for the main item ,- item category, choose "Cumulate cost", so that cost of the sub items will be cumulated to main item.
    eg:
    MATERIAL QTY COST SALES NET VALUE
    A 0 0 1,500.00
    A1 1 100.00 0
    A2 1 50.00 0
    My problem is how to make the material A is alway ZEROS stock on hand and allow in sales order creation with ZEROS order qty?
    To avoid this, mark order qtty=1, in item category for main item, but for the same item, sch.line category should not have mov type. so that there will nt be any PGI document. But PGI should be done for sub items to capture inventory & cost.
    Test & revert, if any issues.

  • User exit or BADI for business area in sales order

    Hi,
    At present the business area in the sales order is greyed.i want to remove the greyed field and put some input value to the  business area  when a new sales order is created....
    Please suggest the user exits or BADIS
    Kanishak
    Edited by: Kanishak Gupta on Feb 4, 2010 1:06 PM

    Hi Kanishak
    You can use userexit userexit_cobl_send_header
    If you overule the settings, you will be able to enter business area ( GSBER )
    Also, try out:
    userexit_cobl_receive_vbak to transfer the screen value entered by the user back to vbak-gsber.
    If item level is also necessary you also need :
    userexit_cobl_send_item
    userexit_cobl_receive_vbap
    Hope this helps.
    Harsh

  • Business Event when Sales Order is Booked....Custom Business Requirement

    Hello,
    I have business requirement like when a sales order line is booked/ Item is Received in Inventory/ Line is Cancelled , I need to update quantity,price for that customer and item# in a custom table.
    So what is the best approach to do it..Is it making use of business events or Alerts or any other approach?
    If business events, can you please tell me what are the business events and how to find out event parameters for the following
    1. When Sales order Line is Booked
    2. When Item is Received in Inventory
    3. When Account Alias Receipt is Done in Inventory
    Please advise.
    Thanks,
    Sridhar

    Check these links
    https://forums.oracle.com/thread/2337912
    https://forums.oracle.com/thread/976272
    https://forums.oracle.com/message/2427841
    I don't recommend alert as the alert is fired during every record update. If you have modified the OM workflow, then you can achieve your requirement by adding a new node/function in the workflow to update the custom table.
    Thanks
    Shree

  • How we can increase decimal places in Sales Order for Qty

    Hi,
    In Sales Order qty field now its 3 decimal places for MON unit of measure but we want 4. how we can increase decimal places.
    Thanks in advance
    Thanks & Regards,
    PM

    To elaborate better.
    Again, use Tcode CUNI - Unit of measurement : Initial Screen.
    At initial screen, choose TIME from the list (where by default AAAADL- no dimensions is there).
    And click on UNIT OF MEASUREMENT button.
    In that you will find MON - Month.
    There go for details by selecting MON or select MON and press F5 from Key board.
    For MON unit maintain following parameter as per your requirement:
    -Number of decimal places for number display
    Use - This parameter determines the number of decimal places with which this measurement unit is displayed.
    -Base ten exponent for floating-point display
    Use - This exponent determines how the values for this measurement unit are formatted as floating point numbers.
    Examples - If the exponent is 3, the floating point numbers have the format xxx.xxxxE3.
    And deselect commercial meas. unit in application parameters section.
    I would suggest instead of changing standard settings of MON, you create ZMON in TIME dimension.
    Thanks & Regards
    JP

  • SZA1_D0100-SMTP_ADDR (e-mail adress in business partner for sales order)

    I need to control that the in the Sales Order the field SZA1_D0100-SMTP_ADDR (e-mail adress in business partner) is setted.
    I thinked to use USEREXIT_SAVE_DOCUMENT_PREPARE. In this exit I have on line the structure XVBPA with ADRNR and I haven't on line the structure SZA1_D0100-SMTP. When I'm inserting for first time e-mail adress in sales order, i must read the value in structure and not a DB table. In which structure on line for USEREXIT_SAVE_DOCUMENT_PREPARE i can read e-mail adress for a specific partner?
    Also another way to control the setting of field SZA1_D0100-SMTP_ADDR is ok.
    Thanks.

    I need to control that the field is setted on the sales order during its creation. If there is another way....it is ok.
    I have seen that exist the structure ADSMTP where there is adress e-mail, but it isn't on line in the exit USEREXIT_SAVE_DOCUMENT_PREPARE.
    Who can help me?
    Thanks.
    Edited by: Biagio70 on Oct 18, 2010 4:19 PM
    Edited by: Biagio70 on Oct 18, 2010 7:36 PM

  • Redetermine Business Area in Sales Orders

    Hello
    I need to re-determine Business Area in already created Sales Orders. Orders are open - not delivered, or invoiced. How to do it?

    Dear Friend,
    Business Area is determine in Sales order for each line Item automatically based on config setting in Enterprises
    Structure in combination of PLANT + Division  + Business Area  and you can't change the same.
    Note: Please make habbit of updating your thread,whether answered or where r u getting stuck.
    Regards
    AJIT K SINGH
    Edited by: AJIT K SINGH on Sep 28, 2010 1:08 PM

  • Business object for sales order credit status

    Is there a sap delivered business object that has a method to get credit status and overall blocked status of a sales order?

    This forum is for general questions about Business Objects (the company) products and information; since your question pertains to SAP products you will want to find the forum that relates most closely to your question so you can have experts in that area helping you.

  • DETERMINE BUSINESS AREA IN SALES ORDER - BADI

    Hi,
    I wanted to Hardcode a Business area for a specific document type while creating sales order.
    Initially the code was added to the userexit to move fields to VBAP but the values added in that code get overriden by the business area determination logic (in FV45PF0V_VBAP-GSBER_ERMITTELN)
    This function further calls the following method in the BADI - BADI_SD_SALES_BASIC
    - IF_EX_BADI_SD_SALES_BASIC~DETERMINE_BUSINESS_AREA
    This BADI has the flag - 'For SAP Internal use' checked.
    I am new to BADI's so wanted to know if it is ok to add code to this method and changes the business area in VBAP based on the sales document type.
    Thanks
    Navdeep Singh

    You cannot create an implimentation for a BADI if it says for SAP internal use,  you need to look for another BADI or User exit

  • Create Business partner and Sales order automatic based on Excel file

    Hello everyone,
    Can anyone help me with the following.
    I need to create automatic Business partner master data and the Sales order in Business One based on the input list from one Excel file.
    Before the new automatic Sales order should to be created  the system need to create first the BP and then the Sales order using the new created BP.
    Is it possible to use some tools like CATT or LSMW for this reason.
    If yes can you please help me with a sample/
    Thanks and regards.

    use DTW (data transfer workbench ) or if you want to automate the entire thing, then an add-on using the DI is best.

  • Business area in sales order

    Hi,
    We are facing the problem that we will describe next:
    When we create a order the field business area it is not available.
    Till now the assigning in transaction OMJ7 was enought, in other words
    the business area it is assign to a plant. So the business area was
    equal to the plant because we assign it on transaction OMJ7 (at least
    we are supposing that).
    Now, we have the need of making some exceptions in some documents so it
    will be useful that the field business area was open for user filling
    because we need a diferent business area in accounting.
    How can we do that?
    We thanks in advance your best efforts to solve our problem.
    Best Regards
    João Fernandes

    Hi Dirk,
    Thank you for your answer. It works well but the problem remains.
    Now I have the field clear and i fill it (  cobl-gsber = 'MREV'.) in the user exit but when i save the delivery and the billing the field was saved with business area that is in customizing. So i thought that somewhere in the sales process  field cobl-gsber is filled again. Should i found another user-exits in delivery area and billing area?
    Can you tell me if there is another user exit that can be used?
    Meanwhile I will to post another message in the forum in order to find a solution exclusively by customizing means.
                  Best Regards
                      João Fernandes

  • Sales order creation for a project

    Dear all,
    I would like to know how to create quotation ,sales order, delivery and Billing for a total project. Let me explain the situation.. Customer has 4 different product.. they have 4 Plants to produce those materials.. They will sell each products individually and combination of others also. Their sales process is Customer will place an order for the total project which involves supply erection and Training. The erection and training may take 3 months to 1 year. The requirement is customer wants to create quotation and sales order creation in SAP. Also they want to map the erection and Training in SAP. They would like to capture the expenses involved during the erection and Training period. In this case excise duty, Sales Tax and service Tax all are involved in the same project.
    Can any one suggest some idea
    Thanks in advance
    Sriram

    Hi,
    It is understood that your client has 4 plants for 4 different materials. Your client sells materials and service (1.Installation of equipment and 2.Training the users). Your client wants to know the cost of the sold items (Materials and services). The billings are subjected to all applicable taxes.
    As you know, these requirements can be mapped in SAP by SD and PS modules.
    SD Module: Whatever the customer places the order (either partially or as total), you can create quotations. The materials are finished goods (FERT) and service materials (DIEN). The pricing procedure should consider all applicable duties and taxes.
    The business flow: Quotation >> Sales order >> Delivery of goods >> Billing (VF01) >> Excise Invoice >> Account receivable.
    Note: To link the sales order with PS module you have to maintain respective u2018WBS Elementu2019 in the Account assignment tab of the sales order. This is used for planned revenue in PS.
    Since you are supplying goods from all plants, maintain all plants to Sales organization and distribution channel combination in Assignment of Enterprise structure.
    PS Module:
    If the customer orders for an entire project including supply of materials, installation and training the users, create a project definition for that project in the project system. Assign a main WBS element under the project definition. Assign lower level WBS element according to your need. Under the WBS element network is assigned. Under the network activities are assigned. Under the activity there are activity elements. There are different types of activities; internal, external etc.
    You can assign different WBS element for services. Under this the relevant activities are assigned.
    You can budget for the project; you can assign supplementary budget if it is required. 
    When you release the project the Purchase requisitions are generated. The MM persons will create PO and procure the materials for the project.
    All the materials required are initiated from PS. Here every activity is routed through PS including service.  So, all the expenses are captured.
    By settlement rule, the cost is arrived at different levels.
    The configuration is to be done accordingly.
    Hope this give you an idea on the subject.
    Regards,
    K Bharathi

Maybe you are looking for