Auto Assigning of Business Partner to a task

Hi Champions,
I have a situation where I have to assign a business partner as soon as joining happens to a default task and default role of the project through ABAP program.
I have been able to achieve the auto allocation of the business partner to default role using the BAPI BAPI_BUS2177_STAFFING_ADD.  This creates a link in DPR_BUPA_LINK table also.
Now I am stuck as to how to assign this business partner to the default task.  Which BAPI shall I use and what shall I pass as input to it achieve this.
It will be great help on hearing from on this.
Regards, Sandeep

Hi
Logic can be like this:
Get GUID of Task of which is going to be default.
Once employee (BP) is created, the program (scheduled at backend) will run n use the FM u mentioned.
Niranjan
Let me know if you need more info !!!

Similar Messages

  • Incident management error: You are not assigned a Business Partner

    Hi
    I am facing a problem while creating message as below
    error: You are not assigned a Business Partner
    I created the BP. which has clear identification too.
    Even this BP is maintained as Employee too.
    Expecting ur valuable suggestions.
    Regards,
    Siva

    Hi
    Was this issue ever resolved?
    I have the same problem.
    I have business partners, also created as employees with their user id held in the Identification tab of the employee view in BP.
    In the business partner Identification tab, they have the system ID>Installation No>client>user id maintained
    When I go into solman_workcenter I see the message 'you are not assigned a business partner' and I cannot see any of the tickets assigned to me.
    Has anyone had the same issue and resolved it?
    Thanks for your help.
    Ashley

  • Dealer Portal - Vehicle Management System - Personalization - Web Dynpro component assignment for business partner is missing

    Hi,
    In the Dealer Portal, Vehicle Sales Role --> Personalization.
    I am getting below Warning message.
    The Web Dynpro component assignment for business partner is missing.
    As per my investigation found below.
    Since address formats are different for each country, you can define in the Customizing activity Assign Web Dynpro Components to Country-Specific Address Formats under SPRO --> Logistics Execution --> Dealer Portal which Web Dynpro component you want the system to use for displaying end customer addresses.
    BUT do NOT understand the name of WebDynpro Component to provide.
    What are the entries or WebDynpro component names to fill in below?

    Hi Hussain,
    Could you share the step-by-step solution? Thanks.

  • Manual assignment of Business Partner in PPOMA_CRM with respect to Organiza

    Dear all,
    I am using external number ranges for the Business Partner, that's why I want to assign manually business partner (should appear in the column of BP in front of an Organizational unit) in transaction code "PPOMA_CRM". The system assign the BP automatically with the Internal number assignment but i want to use the External Number ranges. really appreciate your help.
    cheers,
    Administrator.

    Hi Monika,
    A position cannot be shared between 100 or 1000 employees. At the max between 2-3 employees with the total percentage adding up to not more than 100 %.Its ideal that each employee has a unique position so that it can be helpful in reporting as well.
    Regards
    Leon

  • No central person is assigned to Business Partner

    Hi,
    we are using srm 3.0 with ebp 4.0
    While updating the org strcuture we deleted the Position entry & the assignment for one user.
    Also the BP entry was deleted using bupa_del.
    we have few shopping carts open in the system which , so we used users_gen and recreated the user in org struture but now when we try to display the shopping cart via bbp_pd we get message.
    No central person is assigned to Business Partner. ID 4259F7DCC67E3C9AE1000000C6D07530
    Message no. CRM_CENTRAL_PERSON003
    also on using the portal when we try to monitor the shopping cart and then display the line litems we get message system error in check_status_sc (LBBP_MON_SCF50).
    can some one tell us what do we need to do to correct the error.
    Thanks.
    R.M.

    Check the BP for the user after creating again. It should have changed, that's why you are getting this message. So you need to update the new BP in the shopping cart. There are some reports to change the requestor do some seach in SDN forum you will find it. Once you update the new BP in the shopping cart you should be all set.
    Thanks
    Padhi

  • Auto Assignment of Business Place in Sales Orders

    Dear Experts,
    So far my knowledge a business place can be assigned to sales office and if the sales document is with some VAT Tax code it takes business place automatically.
    But I have sales which is free of tax. Please advise how to assign business place automatically for these tax free sales.
    Thanks,
    Deb

    Hi,
    Is there any requirement for which you need business place for non taxable sales. You can try substitution using tax code and deriving the business place.
    Regards
    Milind Sonalkar

  • Automate the assignment of  business partner attribute set .

    Hi All,
    I want to automate assigning marketing attribute set and their respective attribute values using ABAP program.
    I am debugging the code and also trying to debug by using Trace , but no success till now.
    any one knows how to do it ?

    Thanks Gregor,
    I got the funciton modules :-
    CRM_MKTBP_ASSIGN_ATTRIBUT_TAB
    It assigns the attribute set and its corresponding attribute vales.
    Message was edited by: Nav

  • How to Assign Business partner for Vendor Organisation

    Hi,
    We are in SRM upgrade from SRM 3.0 to SRM 7.0.
    For Vendor organisation say 0 50002381  there is no Business partner assigned.
    Under this organisation there are 200 vendors .
    When i run the report: BBP_XPRA_ORGEH_TO_VENDOR_GROUP
    it is showing an error -No partner assigned
    How to assign the Business partner for the organisation .
    Please give your inputs
    Regards
    G.Ganesh Kumar

    Hi Muthu,
    Thanks for the reply
    Already the SAP NOTES : 1372409 is applied.
    I am running the Migration report: BBP_XPRA_ORGEH_TO_VENDOR_GROUP. I am getting an error
    " Check mode 9: :Invalid Object on supplier node"
    How to resolve this issue.
    Already one more thread is open for this issue
    Regards
    G.Ganesh Kumar

  • Create Employee as a Business partner using BAPI

    Hi,
        I created a business partner using the BAPI,
    "BAPI_BUP_CREATE_FROM_DATA". I used this within a program. The business partner gets successfully created and gets reflected in the table BUT000. But I do not see it when I run the user exit "RPM_EMPDATA".Because of this I am not able to see the business partner inside cProjects. I am able to see the business partner inside the transaction BP. When I go into change mode and change the role (from Business partner role to Resource role),and when I save this business partner  I am able to see the details in the user exit RPM_EMPDATA. I am also able to assign this business partner to tasks in cProjects.
    Message was edited by:
            Sudheendra Puthuraya

    Hi sanjay,
    Thanks for ur reply.
    i just referred all the documents that you have mentioned in the previous suggestion.
    [ID 1400877.1] - This one doesnt help me and i have rehired the employee and checked but still facing the same issue in the supplier interface.
    [ID 433746.1] - This one refers to the creation supplier through forms and i have checked the same which has been mentioned in the document. Everything is fine which the front end creation too.
    But am still facing the same issue.
    Kindly suggest me the if the issue can be solved in someother ways.
    Thanks in Advance.
    Brgds
    Max

  • Business Partner Number - HRALX-HRAC  problem

    Hello,
      I am trying to configure Service desk in Solution Manager 7.0
    While creating Business partner through t-code ppoma_crm.
    But after creating Business partner, there is no assignment of Business partner number  to business partner.
    I have check entry  HRALX-HRAC  in table T77S0, in transaction sm30, 
    For HRALX-HRAC flag is not set.
    What should I do to set this Flag?
    Should I set manually or there is any procedure for it???
    Kindly guide regarding this.
    Thanks,
    Chandresh Pranami.

    Dear Chandresh,
    have you activated the BC sets for service desk?
    You can the following
    Go to the following IMG path: Customer Relationship Management -> Master Data -> Business Partner -> Integration Business Partner-Organization Management -> Set Up Integration with Organizational Management.
    Find the entries starting with HRALX. You should have those entries:
    HRLAX - HRAC with the value u2018X',
    create this entry in the table and Save.
    HRLAX-OBPON with the value u2018ON',
    create this entry in the table and Save.
    Regards
    Prakhar

  • Automatic Creation of customer from business Partner

    Hi Deepak M
    Thank you very much for your response , but what is the effect of assigning the business partner  number to an internal number assignment in customer account ( FI ). The FI team had assigned an internal number assignment for this account group. What are they supposed to do.
    Please help
    Thank y

    Hi David,
                 If you are creating customers from BP. i.e. first the BP will get created and then customer gets created, the way system behaves is that it creates the BP and get a number is generated for it, then it goes and create a customer with the same number by passing the number already created as BP.
    So the number range for BP should be internal and for the customer account group should be external. you might need to create a different customer account group for REFX customers.
    Assumption: same number range tick is selected in the assignment where we assign the BP group and customer account group.
    Regards,
    Deepak M

  • How to Create Business Partner with  fix number in t-code :BP

    Dear SIr,
    Normally I will set number range for auto  to create Business Partner. In case , If we would like to crea How to Create Business Partner with  fix number in t-code :BP , howe to do?
    Please kindly advise.
    THnak you and best regards,
    Vimol

    Dear Shobhit,
    How to put the thread as you mentioned.
    Best regards,

  • FM to create business partner in dialog from address

    Hello gurus,
    anyone got an idea how to create a business partner in dialog mode and provide a given address as default. I already checked several function modules / BAPIs, but I couldn't find one that provides this functionality.
    Would be great if someone has a hint!
    Thanks in advance,
    Alej

    Hi,
    Try this BAPI_BUPA_FS_CREATE_FROM_DATA2
    With this method you can create business partners in selected business partner roles (BP roles).
    You can create business partners of the category person, organization, or group, enter relevant general data, and control the number assignment using business partner grouping.
    You can also enter an address including data for address-dependent and address-independent communication methods.
    For more info on BAPI_BUPA_FS_CREATE_FROM_DATA2 [click here.|http://www.se80.co.uk/sapfms/b/bapi/bapi_bupa_fs_create_from_data2.htm]
    Try this also BAPI_BUSPARTNER_CREATE
    [Click here |http://www.se80.co.uk/sapfms/b/bapi/bapi_buspartner_create.htm]for more info.
    If you create a business partner in dialog using the Create business....[click here|http://education.feedfury.com/content/14689322-master-data-template-categories-b partner-and-contract-account.html].
    May it helps you.
    Regards.
    DS.

  • Organizational objects do not create a Business Partner ID

    I am setting up SRM org structure with PPOCA_BBP/PPOMA_BBP transaction. I am creating, companies, plants, purchase orgs, purchasing groups and positions and the problem is that SRM is not assigning a Business Partner number to any of those.
    I have already checked that there is an internal and external number range setup for Business Partners. Do you have any hints why this could be happening? Your help will be appreciated.
    Thank you.

    Hi
    Which SRM version are you using ?
    I imagine you would like to synchronize business partner data, which are created in backend, into SRM. You can use Tcode BBPGETVD or BBPUPDVD or run/schedule bbp_vendor_sync (need customizing).
    You can create BP:->
    1) Either via middleware replication from R/3 to SRM - BBPGETVD.
    2) Either manually directly in SRM web transaction - BBPMAININT.
    <u>Please go through these pointers, which will definitely help -></u>
    Re: Errors: Business partner of organizational unit 50024549 has no address
    Re: Assinging users to Business Partners in EBP Org Structure
    Missing Business Partner
    Re: Error Changing Business partner address
    Re: Problem with BP. Assignment: Business partner person to user not unique
    Error in creation of Employee for Business Partner
    Re: Business Partner not created in PPOMA_BBP
    delete company code in ppoma_bbp
    Re: Business partner relationships -- "Is Identical To"
    Re: PPOMA_BBP / PPOCA /PPOSA without Address field
    Do let me know.
    Regards
    - Atul

  • How to find link between Business partner and Org unit in Solution manager

    Hi experts,
    Please!!!
    I have a requirement where my rule finds business partner assinged for that support team and in transaction ppoma_crm we have org unit assigned to that business partner number below that we have positions and user assigned...
    I can find business partner for the transaction now i need to find the org unit for the assigned business partner so i could use for agent determination in workflow.
    Thanks and Regards
    Annamalai

    do you know? ... the structure is like this... i have orgunit then a position to it and then i have assigned a business partner which is with prefix CP... i m not seeing the users assigned to it so my workflow doesnt get triggered if i use this org unit..
    regards

Maybe you are looking for