Auto-Check Not Checking

I have my iPhone's setting to check for new e-mail every 15 minutes. However, it does not automatically check every 15 minutes. It winds up not checking until I go into the mail account to see if I have any new e-mail. I have both Yahoo and AOL accounts on it. How can I resolve this issue, so that it will check for my email?

I forgot to include that I tried turning off the recent mode but that made it so I couldn't receive email at all, even using the manual check. It would connect and check for mail and the new email counter would go up to 25 and then it would finish without actually showing any of the new messages. Strange.
The auto-check has worked a few times since I first posted about this - I'll update if I figure it out.
Thanks!
iMac (Intel) iPhone
iMac (Intel) iPhone

Similar Messages

  • Duplicate Invoice Check Not Checking the Gross Invoice Amount-

    Gurus,
    When checking for duplicate invoices in MIRO/FB60, I have made all the config and setup but still the system is not checking the gross Invoice amount field. Lets say I enter
    Invoice 1 :
                     Vendor                 X
                      Reference            123
                      Date                    10/27/2010
                      Company Code : 1111
                      Currency           : USD
                      AMOUNT           :100         and post this invoice
    I try to enter the second invoice
    Invoice 2: 
                       Vendor                 X
                      Reference            123
                      Date                    10/27/2010
                      Company Code : 1111
                      Currency           : USD
                      AMOUNT           : 90    
    I get the error message even though the AMOUNT in the second invoice is 90 which is not the same as first invoice .
    I chcked the vendor master duplicate check, made the config in spro-liv for duplicate invoice for company code, reference number and invoice date.
    The help says that after 4.6 version if all of them match, then the system wiill throw error, but in my case the amount is not matching and its still giving me an error.
    Kindly help..<< Moderator message - Please do not offer points >>
    << Moderator message - Everyone's problem is important >>
    Edited by: Rob Burbank on Oct 27, 2010 4:07 PM

    Hi,
    After making the duplcate invoices chek at spro will checks the reference number of the invoice entered previouslu with that one entered later for that company code.as the first check itself failed system throws the error thinking, you are trying to enter a duplicate invoice for a  already posted invoice though how much is the amount in the second invoice .
    It will allow to enter the item details , if the dupplicate invoice check is properly configured for that company code and ref number .Did you get the error mesage after entering the details?If you get a error a message which stops furthur entry them your conf is correct, if not you may need to check back .
    Check the invoice toletrances at spro too amount.
    the below link explains you the process of dupliation in LIV.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/ce/4f3e39ea3aee02e10000000a114084/frameset.htm
    Regards,

  • Plugin checker not check half of plugins why?

    plugin checker not work properly , half of plugins remain from update

    @philipp I just tried your suggestion. No luck there, even after restarting my browser.
    Also, it appears I am not the only one with this issue. I just spotted another thread describing the same issue.

  • New iMac brightness level keeps changing (auto adjust NOT checked)

    Just got a new 27 inch iMac and keep on having to change the brightness level back to the brightness I prefer.
    I do not have auto adjust checked, I put the brightness slider up to the level I like and after a while the brightness dims to what seems like the default level as its always down to the same spot on the slider...what gives? i just want it to stay where I want it...
    Help.

    I have same problem, of autobrightness being unchecked and my brightness going from full to about 3/4 bright
    all by itself. I had that problem, then flickering of my screen also was taking place. I didn't bring my unit into Apple
    because this autobrightness thing plus flickering would not happen on command,, and I wouldn't be able to show them properly. Well , finally my left side of the screen dimmed,, and that was the go ahead to bring it in to them
    to show the left side of screen. I also told them about the flickering,, and the autobrightness, which I figured played a role into the final left side dimming. They replaced the backlight and the display LCD on warranty.
    I have had it for about 5 days. The screen is equally lit (as should be), however, I discovered that my same old
    problem of autobrightness, is slipping back to 3/4.  So most of you have autobrightness problem in a sort of different way. I set mine to "torch" because my downstairs bedroom is dim (with one overhead light), but sometimes, just plain dark,, so I want to sometimes keep it at torch,, however, it still slips back. You would
    almost think that if my surronding was dim or dark, that it would stay on torch if the autobrightness was really working properly. Go figure. I just tried SMC a short while ago,, I had tried, before my repair doing PRAM and the other one (I think VRAM).  I also will unhook my second monitor to see if that is having an impact on things.
    Do any of you in this post have a second monitor attached,, and have you tried unhooking it to see if the problem
    is resolved?

  • Sound Check not Checking

    I have sound check enabled in both the ipod and itunes. When I play music on the ipod it seems pretty apparent on some songs that the level is varied. Is that just the way it is?

    I never got an answer on this -- but I moved on...

  • Auto Keyframing Happens When Function Is Not Checked

    Having some trouble with keyframes popping up with every move.  The auto keyfame button is not checked.  From what I can find that is the only thing that controls that function.  I've restarted my project.  Started a new one.  Reset adobe.  Nothing I do is making this function go away.  I can't seem to figure out what I could have done that is causing it but it's making it hard to get things done.  Is there some other setting I'm not aware of?

    Your After Effects Preferences file may be bad.  You may have to restore the defaults.
    Here's how to do it: you will find the information near the top of the page.

  • Playlists, not checked on iTunes, showing up on iPhone after installing IOS 7.2

    My playists, which are not checked, are being synced to my iPhone.  I can't figure out how to delete from phone as I do not want them on my iPhone.  One playlist has been synced up to my phone but one has not.  How do I get rid of the playlist on my phone?  How do I get them to not be synced up to my iPhone?  The playlist has no checks in the boxes to be synced up.  I can't delete manually from my phone. 

    I wasn't suggesting iTunes Match as a solution, but as a symptom.  If you're not a subscriber then make sure you have not turned this on by mistake (Settings/Music).
    If that's not it, is your iPhone set to auto-sync to your iTunes library, or do you manually manage music by dragging and dropping songs to your iPhone from iTunes?
    If you autosync, are you syncing your entire library?  If you don't want to do that, change your sync settings on the Music tab while your iPhone is connected to iTunes.  On that tab you can auto-sync to specific playlists, artists, genres, or albums, any combination.  That way you don't get things installed that you don't want.
    If you manually manage music, connect the iPhone to iTunes, select the iPhone name in the left column, expand its contents by clicking the small triangle to the left of the iPhone name, click on the Music category to expand it, then delete the playlist(s) and/or songs that you don't want on the iPhone.

  • Help!! Auto-Deploy and Check For Updates in an OPMN-managed instance

    I'm trying to use the auto-deploy and check for updates functions in an OAS 10.1.0.3 but I can not make it work.
    I don't Know if this functions are only availables for a standalone OC4J instance.
    Can anyone help me??
    Thanks!!! and sorry for my poor english.

    Auto-Deploy is not really designed for an OPMN managed instance -- in earlier releases, this would not even work correctly since deployments where stored in the DCM subsystem and any subsequent configuration changes made via DCM would overwrite the config and you'd lose the "auto-deployed" application.
    In 10.1.3.x where DCM is no longer in the picture, and the auto-deploy polling is a function of Oc4J itself, it may work. Be aware that this is not something that is tested in OPMN managed environments.
    What configuration changes have you made?
    You need to ensure you have modified server.xml so the attribute check-for-updates="all" and you've added the attribute application-auto-deploy-directory and have it pointing at a directory to watch.
    -steve-

  • Do Not Check Uniqueness of Data in Write Optimised DSO

    Hello,
    I am working with write optimised DSO with already billion records in it. I have flag 'Do Not Check Uniqueness of Data' in Settings as checked(means it will surely not check for uniqueness of data). I am thinking of removing this flag off and activate the DSO again. I am willing to remove this flag as it will provide option of Req ID input in listcube on DSO and without this list cube will never return back with results.(I have to analyze aggregations)
    I tried removing this flag and then activate DSO in production system with 17 million records which took 5 mins for activation (index creation). So maths says for a billion records activation transport will take around 6 hrs for moving to Production.
    I am willing to remove this flag as it will provide option of Req ID input in listcube and without this list cube will never return back with results.
    Questions:
    How does this flag checks the uniqueness of record? WIll it check Active table or from the Index?
    To what extent DTP will slow down the process of subsequent data load?
    Any other factors/risks/precautions to be taken?
    Let me know if questions are not clea or further inputs are required from my side.
    Thanks.
    Agasti

    Hi,
    Please go through the site :
    /people/martin.mouilpadeti/blog/2007/08/24/sap-netweaver-70-bi-new-datastore-write-optimized-dso
    As far as your ques are concerned... i hope above blog will answer most of it , and if it does'nt please read below mentioned thread.
    Use of setting "Do Not Check Uniqueness of Data" for Write Optimized DSO
    Regards
    Raj

  • CRM Availability Check not working for certain Item Category

    Hi there,
    I have a situation where for certain order type/item category combinations, the availability check on the same material is not working.
    The check is set up to happen in SAP ECC.
    I have checked the config. under SPRO->CRM->Basic Functions->Availability Check->Availability Check using SAP ECC
    as per many SDN posts on this, and everything looks fine.
    The new item category, which was a copy of an existing one, works (i.e. gives availability) for certain order types, but not others.
    If I create the same order directly in ECC, it works correctly every time.
    I searched the code (from consultants who set it up originally) and can see nothing specific to the order type/ item category.
    I also put a breakpoint on AVAILABILTY_CHECK function module in SAP ECC - it is not being hit, in the case where check is not successful.
    Breakpoints in MV45AFZZ (Sales Order userexit) also not being hit, but they are hit for the Order/item category combination when it works successfully.
    Any suggestions on where else this could be configured would be appreciated!
    thanks,
    David

    Hi David,
    One 'simple' reason for this could be that the copied item category does not have the
    ATP Profile set up in the item category in the IMG. Make sure you have an ATP profile assigned in the area 'ATP Profile' in the item category.
    Please see as well the SCN Wiki link:
    Availability Check CRM-BTX-BF-ATP - CRM - SCN Wiki
    Best regards
    Christophe

  • "all my music is unchecked.  I can not check whole playlists by using the top checkmark to select all.  I went to all my playlists, same thing.  I can only press them ONE at a time, which will take about a day to check all of them." Please help.Windows7

    "While in MY MUSIC on itunes, all my music is unchecked.  I can not check whole playlists by using the top checkmark to select all.  I went to all my playlists, same thing.  I can only press them ONE at a time, which will take about a day to check all of them.
    any ideas?  anyone have same problem?  This just happened since last update." I have windows7

    Thanks A Lot! I should have clicked: "This solved my question" But Thanks all the same!

  • PO creation-ME21n-Why SAP does not check company code and Plant relation

    Hi All,
    Does someone know, why SAP does not check Plant and company code relation at the time of PO creation or how can we put validation between plant and company code at the time of PO creation.
    <b>Example:</b> Suppose i have a company 0001 which is assinged to Plant 0001. when i am creating a PO with another company code 0002(Entering at header level-Org, data) and using Plant 0001 at line item level. SAP does not do this validation.
    How can we put this check in place?
    Thanks in advance.
    Deepak

    Hello Deepak,
    There are three types of purchasing
    - Company code specific :You need to assign company code to Pur organization
    - Plant specific : You must assign plant to pur organization
    - Cross company purchasing: No assignment between company code and pur organization.
    In the case 3, the system will not check company code and plant relationship, but it will check plant and pur organization specific.
    The following is the copy of sap help text:
    You can assign a purchasing organization to one company code. This is company-specific purchasing.
    You can assign a purchasing organization to no company code. This purchasing organization can then procure for all plants assigned to it, irrespective of the company code to which the plant belongs.
    Since each plant must be assigned to a company code, the company code can be determined via the plant in each procurement transaction, even if the procuring purchasing organization is not assigned to a company code.
    A purchasing organization must be assigned to one or more plants. This is plant-specific purchasing.
    Now, check your company-code and purchase organization assignment.
    Hope this helps.
    Regards
    Arif Mansuri

  • Why can I not check the 'shuffle images' box in a slide show settings in iPhoto 9.6?

    Why can I not check the 'Shuffle images' box in settings of a slide show in iPhoto 9.6? All other settings I can check but this one.

    Hey Brad,
    If you are unable to select the shuffle images checkbox, follow the steps in this article -
    iPhoto '11: Change slideshow settings
    Specifically -
    To display slides in random order, select “Shuffle slide order.” If you don’t see this option, play the slideshow, move the pointer to make the slideshow controls appear, and then click the Settings button.
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.

    When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.

    If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa

  • I am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad.  an unknown error occurs (1631).  what do I do??

    am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad.  an unknown error occurs (1631).  what do I do??

    The search bar can be very valuable...........
    In using it, I found out other's have had this issue and it likely means you have a 3G iPad?  If you do, go into settings and turn off cellular data, then try to update again and you should be OK........

Maybe you are looking for