Auto code generation
Hi everyone,
I am new to using LabVIEW (I've come from a background of C/C++, Java, Perl, etc...) and have learned quite a bit about using LabVIEW 7.0. But what I am finding is that it is horrible about code reuse. Apparently, from what I can gather, if I wish to reuse code, I need to generate a VI template which is a fancy way of doing copy coding *shiver*.
So fine, if copy coding is the only way to generate reusable code, so be it, but is there a way of automatically replacing a static typedef with another automatically from a referencing VI? If I was coding this in C, I would use a sed script to search and replace the type name with another in the files, but given the binary nature of the .vi and .vit files, I don't think that this is an option.
I can't wait till we move over to LabVIEW 8.x which supports OOP as this will alleviate much of the problems I am seeing.
Any help anyone can give is greatly appreciated. Thank you for your time.
Adrian
That should have been
File >>> Save with options >>> single prompt >>> preserve hierachy
I wrote a VI that will clone rename and replace a typedef but it is in LV 7.1. Lacking that tool you will have to do the cloning by hand.
For your icon you use these methods.
And to save you asking about other things that will require scripting, see the Rusty nails on LAVA.
Ben
Message Edited by Ben on 10-03-2007 12:29 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Icon.PNG 23 KB
Similar Messages
-
Business partner auto code generation
hi how to create business partner auto code generation. its based on customer group for example we have more customer group..dealer, distributor,subcontractor...
here dealer and distributor group starting cardcode is - C000001,C000002,C000003..... etc
when i was choose subcontractor its starts SUB00001,SUB00002...... etc
vendor is maintain same starting letter in all groups V000001,V000002
Thanks in advance
Thanks & Regards
B.Lakshmi Narayananhi thanks for your valuable replies...
i changed the codes...pls check its right or wrong
declare @temp as char(20)
IF $[OCRD.GroupCode] = 104 and $[OCRD.cardtype] = 'c'
BEGIN
set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where (groupcode= 104) and (len(cardCode)=7))
set @temp='TRA'isnull(replicate(0,7-len(@temp)),'')@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.cardtype] = 'C'
BEGIN
set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where (len(cardCode)=7))
set @temp='C'isnull(replicate(0,7-len(@temp)),'')@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.cardtype] = 'S'
BEGIN
set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where (len(cardCode)=7))
set @temp='S'isnull(replicate(0,7-len(@temp)),'')@temp
select cast(@temp as char(20))
END
Thanks & Regards
B.Lakshmi Narayanan -
Refactor - Renaming Problem Auto Code Generation
After renaming the java source files (backing beans) to upper case letters (ex. from console.java to Console.java),
JSC is not able to instantiate this class anymore, because the managed-bean.xml is altered automatically.
The next problem is the jsp-file. JSC produces some useless code which points to the new (by JSC) created managed beans (old ones still exist)
example (jsp):
</ui:body>
</ui:html>
</ui:page>
</f:view>
<ui:body binding="#{request$console.body1}" id="body1"/>
(managed-beans.xml)
<managed-bean>
<managed-bean-name>request$console</managed-bean-name>
I�m not able to delete this generated code, because after saving and reloading the jsp-file the inserted code is still there.
In the projects view my java source files are shown in small letters, even if the files are in upper case on the file system (explorer).
I�m using Studio Creator 2 Update 1 (Build 060915)
The project can only be deployed (exporting *.war in JSC) and executed when i change the file attributes to read-only after editing them with a standard text editor.
Any suggestions?Hi Naveen,
I found these two fms's which would enable automatic item code generation. See if it helps you.
declare @temp as char(20)
IF $[OITM.ItmsGrpCod] = 101
BEGIN
set @temp=(select isnull(max(right(ItemCode,4)),0) + 1 from OITM where (ItmsGrpCod= 101) and (len(ItemCode)=7))
set @temp='DRM'+isnull(replicate(0,4-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OITM.ItmsGrpCod] = 102
BEGIN
set @temp=(select isnull(max(right(ItemCode,4)),0) + 1 from OITM where (ItmsGrpCod= 102) and (len(ItemCode)=7))
set @temp='PKG'+isnull(replicate(0,4-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
And:
DECLARE
@NUM AS CHAR(7)
SET @NUM =
(SELECT RIGHT(MAX(CardCode), 7) FROM OITM)
SET @NUM = @NUM + 1
BEGIN
IF @NUM IS NULL OR @NUM = 0
BEGIN
SELECT 'I0000001'
END
IF @NUM < 10
BEGIN
SELECT 'I000000' + @NUM
END
IF @NUM > 9 AND @NUM < 100
BEGIN
SELECT 'I00000' + @NUM
END
----COMPLETE THE CODE
END
Thanks,
Joseph -
hi,
i am using following query for auto code generation group wise
declare @temp as char(20)
IF $[OITM.ItmsGrpCod] = 101
BEGIN
set @temp=(select isnull(max(right(ItemCode,6)),0) + 1 from OITM where (ItmsGrpCod= 101) and (len(ItemCode)=7))
set @temp='FAB'+isnull(replicate(0,6-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OITM.ItmsGrpCod] = 104
BEGIN
set @temp=(select isnull(max(right(ItemCode,6)),0) + 1 from OITM where (ItmsGrpCod= 104) and (len(ItemCode)=7))
set @temp='BRD'+isnull(replicate(0,6-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
but this does not increment code automatically every time it shows me FAB000001 and BRD000001
thanks
rahulSolved
-
Hi Friends,
My problem is this. My client is want automatic item code generation so how I can do this can you please suggest me.Hi Naveen,
I found these two fms's which would enable automatic item code generation. See if it helps you.
declare @temp as char(20)
IF $[OITM.ItmsGrpCod] = 101
BEGIN
set @temp=(select isnull(max(right(ItemCode,4)),0) + 1 from OITM where (ItmsGrpCod= 101) and (len(ItemCode)=7))
set @temp='DRM'+isnull(replicate(0,4-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OITM.ItmsGrpCod] = 102
BEGIN
set @temp=(select isnull(max(right(ItemCode,4)),0) + 1 from OITM where (ItmsGrpCod= 102) and (len(ItemCode)=7))
set @temp='PKG'+isnull(replicate(0,4-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
And:
DECLARE
@NUM AS CHAR(7)
SET @NUM =
(SELECT RIGHT(MAX(CardCode), 7) FROM OITM)
SET @NUM = @NUM + 1
BEGIN
IF @NUM IS NULL OR @NUM = 0
BEGIN
SELECT 'I0000001'
END
IF @NUM < 10
BEGIN
SELECT 'I000000' + @NUM
END
IF @NUM > 9 AND @NUM < 100
BEGIN
SELECT 'I00000' + @NUM
END
----COMPLETE THE CODE
END
Thanks,
Joseph -
Enhanced Flash Builder Code Generation Functionality
For voting in JIRA:
https://bugs.adobe.com/jira/browse/FB-27169
The code generation feature FB 4 currently has is only really useful for quick throwaway prototyping or very simple forms. The generation should allow you to configure formatting via default templates, AND optionally utilize a dialog box (similar to that used in refactoring but with a few extras) so that you can configure the contents of each generated function and provide appropriate function names according to coding best practices. For example:
-User initiates event handler generation
(Optional, if Codegen dialog is enabled)
-User is prompted with a dialog that allows them to customize the generated function name, and possibly specify whether they need an Event parameter passed to the function. (Default to NO event parameter, but this could be a pre-configured user option.)
-FB utilizes the customized code generation format (customizable by the developer) to generate the new function
If you need a "submitForm()" function and you want both a TextInput's enter action and a button's click action to call it, currently you're better off typing it all yourself, because auto-generation is going to put this long-named function that assumes you need 'event' passed to it. An event:MouseEvent parameter just gets in the way when you also want a TextInput's enter event to call that function, for example. Or perhaps we want to provide a more descriptive name to each handler (via dialog) without assigning IDs to each and every component: "datagrid1_changeHandler" or "button1_changeHandler" doesn't tell us what the function actually does. It's a basic coding best practice to name functions or methods after the actions they actually perform, and in a large application with complex forms auto-generated generic sounding function names are essentially useless from a maintainability standpoint.For anyone interested, I figured it out:
to generate a CFC, you have to right-click a table in the RDS Dataview, then you can generate a CFC. You cannot generate a CFC from an AS class as described in the CF Builder help within Flash Builder.
Adobe: it would be nice if this got fixed – and if someone there replied to posts like this. You do know all this, don‘t you? -
NI Veristand 2014 doesn't appear in MATLAB R2014a Code generation
Hi
I installed NI Veristand 2014 after installing MATLAB R2014a. I restarted my PC and tried to apply the sinewave example. I looked at code generation in Simulink model configuration parameters but couldn't find the NIVeristand option as illustrated in video. Here is a screenshot of system target file:
Did I miss installing something? That was my installation (since I need Veristand to compile MATLAB model):
Thanks for your assistance in advance
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology
Solved!
Go to Solution.Hi Waleed,
Unfortunately the behavior your are experiencing is a fault in our installer's auto-detection of MATLAB R2014a. The NI VeriStand 2014 node you see in the installer setup window is actually hiding several other unique options. The default selections should auto-select MATLAB support if MATLAB was successfully detected by our installer, unfortunately this procedure has failed.
To workaround this:
1. Relaunch the installer setup window
2. In the Features setup window (your second picture), left click on the image next to the NI VeriStand 2014 label
3. You should now be presented with the option, Install with customization - select this option.
4. Proceed with the installation, eventually you be presented with custom options for the VeriStand product.
5. In the VeriStand feature list, select the NI VeriStand 2014 Model Framework option
6. Proceed with the installation.
After this, restart MATLAB and then relaunch. If the installation was successful, on relaunch of the MATLAB COmmand Window will print the string Initializing NI VeriStnad 2014. Please note that we've documented this issue and are making an effort to address it.
Nestor -
Error in code generation for deleting table BUT000_TD
Hi,
Did anyone encounter this error while working on EEWB ?
I created the project extension via EEWB and completed the wizard setting with the package (dev. class) value as $temp as I wanted to test it locally.
One of the errors, that I got is:
Error in code generation for deleting table BUT000_TD
Message no. DA464
Diagnosis
This error message indicates that internal inconsistencies exist.
Procedure
Please consult SAP.Hi,
As I mentioned in my previous post kindly check the consistency of the structure BUT000_TD.
Regards,
Sudheer. -
Error during distribution for compiled code generation-Reply
Hi,
Looking at your error messages, it looks as though your build is failing during the code generation phase of an autocompilation. To determine why the code generator crashed, either look in the $FORTE_ROOT/log/forte_ex*.log files or don't use autocompilation and use fcompile.
There are many reasons why the code generator could crash. Some of the things I've come across are running out of memory and trying to find invalid classes.
If its the invalid class problem you'll find a message like:
Generating code for partition BLTCustomWindow_cl0_Part1.
ERROR: Exiting due to following exception:
SYSTEM ERROR: Client partition FTCompile_cl0_Client was terminated by escaped
exception. See the remainder of the error stack for more information.
Class: qqsp_ResourceException
Error #: [1001, 3]
Detected at: qqrt_ForteExecAgent::LoadPartition at 1
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor", (partitionId =
9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
FATAL ERROR: Invalid class ProductBMServices.ProductSecurityMgrProxy
(0x4ecd,0x19a)
Class: qqsp_ImplementationException
Detected at: qqcg_TRclass::SetClass at 2
Last TOOL statement: method ForteCompiler.ProcessPGF
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = 9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
The solution for this instance is to clean up the invalid classes using the c4tstdrv utility.
c4tstdrv > setrepos star8
c4tstdrv > setwork dmcompiledbuild
c4tstdrv > open
Type Service Flags Level
err sh * 255
trc rp 1 4
c4tstdrv > findproj productbmservices
c4tstdrv > cleanuprtclasses
Removing extraneous RTclass ProductShootingLocationMgrProxy
Removing extraneous RTclass PRTerritoryBaseMgrProxy
Removing extraneous RTclass PRTerritoryMgrProxy
Removing extraneous RTclass TalentBaseMgrProxy
Removing extraneous RTclass TalentTypeMgrProxy
Removing extraneous RTclass TitleTypeBaseMgrProxy
Removing extraneous RTclass TitleTypeMgrProxy
Removing extraneous RTclass ProductSecurityBaseClass
Removing extraneous RTclass ProductSecurityBaseQuery
Removing extraneous RTclass ProductSecurityQuery
Removing extraneous RTclass ProductSecurityMgrProxy
c4tstdrv > commit
c4tstdrv > exit
Integrate the changes to the workspace, start the build again and this should have cured the problem.
However, its hard to know what the cause of your problem is without seeing the output in the log files.
Good luck.
Mark Carruthers
20th Century Fox
"Forte Consultants" <[email protected]> 01/22/99 08:35am >>>
Hi,
I'm doing application distribution for my application using a fscript
script and am forcing compilation on 2 of my partitions.
This I have been doing from quite sometime successfully. Recently I
developed a new service and plugged it into my application for
deployment.
I'm successfully able to distribute & deploy the interpreted code. But
I'm getting a long list of system errors when I try doing distribution
for compiled code. And I see only one of the .exe generated instead of
two because of which I'm unable to go ahead with installaion. I would
appreciate if anybody let me know why this's happening ?. The following
is the main chunk of this error list.
Thanks in advance.
--Anand Ramaswamy
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Can not initially communicate with the object named
(Unnamed),
which is supposed to be in partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 140]
Detected at: qqdo_ProxyMgr::CheckAccess at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Attempt to send to unknown destination partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 102]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Fri Jan 22 10:44:22
Distributed method called: qqdo_InternalMessage.<Message> (object
name
Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
(partitionId
= 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
no
longer exists. The process associated with the partition probably
terminated.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::CheckStarted at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #2.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:19
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: The load balanced router is disabled or has no members.
This
can happen if all of the members terminated or failed.
Class: qqsp_DistAccessException
Error #: [601, 161]
Detected at: qqdo_LbRouter::Route at 1
Error Time: Fri Jan 22 10:44:19
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Access to a load balanced router member (which is a
service
object) failed for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 162]
Detected at: qqdo_LbRouter::Route at 2
Error Time: Fri Jan 22 10:44:15
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This distributed reference was previously invalidated due
to the
reasons below.
Class: qqsp_DistAccessException
Error #: [601, 132]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi,
If this INCLUDE is in a function group go the MAIN program and activate from there.
Can you list out the include name?
a® -
FPGA Code Generation fails with error codes 7 and -1
Hi all,
I have been having a weird issue with my LV FPGA compilation in the last couple of days, no matter what I try to compile LV fails to generate the FPGA code files and returns with errors 7 and -1 and complains that the file is not found. This happens no matter what I am trying to compile even a VI with just a while loop. I followed the discussion forum here without any luck, also followed the NI article here and that did not help either. The error codes always get generated at the start of the Generating Intermediate files step #7 (out of 7).
Attached to this post is a screenshot of the error I am getting (error -1 just says internal error and to contact NI support), bellow is basically the error I get for error code 7
An internal software error has occurred. Please contact National Instruments technical support at ni.com/support with the following information:
Error 7 occurred at Read from Text File in nirviGetInstantiation_cRIO-IDSel_Timer.vi->nirviGetInstantiation_cRIO-IDSel_Timer.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
C:\NIFPGA\compilation\cRioController_8-SlotFPGA_FPGA-TriggerTest_C06156E2\IDSel_Timer.vhd
I tried to do some digging to see what could possibly be happening, and I noticed that LV is looking for the vhdl files in the wrong folder (see the line highlighted in red above), when generating the vhdl files, LV will place them inside the "source_files" folder under the compilation project, but for some reason it is trying to find them under the root folder not inside the source_files folder!!!
Does anyone have any idea why LV would be looking for these files in the wrong subfolder?
Thank you,
Aws
Attachments:
Code Generation Errors.png 35 KBHi Aws_Khudhair,
What version of LabVIEW are you using? And what version of the FPGA module? From what I found, it seems as though this is primarily an issue with LabVIEW 8.6 and 8.6.1.
http://digital.ni.com/public.nsf/allkb/A711119FE89E39E78625754E00075E92
This forum also discusses a similar issue:
http://forums.ni.com/t5/Real-Time-Measurement-and/FPGA-compile-errors-after-generating-intemediate-f...
It may also be worth repairing/reinstalling the FPGA Module and the Xilinx compile tools.
Catherine B.
Applications Engineer
National Instruments -
UML & Code Generation (RAD)
Hey everyone,
I'm evaluating Java IDE's right now and I'm working with a group that uses a tool called Popkin to do their design in UML. I'm trying to find a Java IDE that can import (via XMI) those diagrams to do the code generation.
Rational and TogetherSoft have integrated environments that couple the code and design (As you code, the UML is updated and as you create UML, the code is updated, etc.)
I'm wondering though, if you use something like JBuilder, how can you import the UML from another tool? Has anyone messed with Popkin before or tried to integrate something like this?
Thanks,
Willbump
i don't care about this topic any longer, but need to give out a duke dollar, first one to respond wins! -
Hi,
I'm developing an application of ~50+ classes in UML on JSE8 and use java code generation.
The question is about aggregations.
Navigable aggregations translate in java code to a class attribute, and to the corresponding getter/setters-methods.
A non-navigable aggregation is not translated to java code at all.
( I would expect it should translate to an attribute, but without getter/setters.
My understanding is, "navigable" means "navigable from outside the class". Correct?)
So how can I model an aggregation, which translates to an attribute in java, without generating the getters/setters?
And where can I find a comprehensive list of how elements in class diagrams are translated to java code?
Where is the JSE8-UML-manual, which includes all these details about UML code generation?
Thanks a lot for any useful hint!Hi,
actually, the code generator is correct.
A non-navigable association should not generate an attribute.
Consider the example:
class Order -> class Date
You have navigation from class order to class date, but not otherwise.
This means that, given a Order object, you can find it's associated Date.
However, the inverse is not true: given a Date object you have no means of "navigating" or finding out which Order objects would have that date. This is what navigation means.
This should be translated into something like this
class Order{
Date theDate;
class Date{
int day, whatever;
//no ref to order-non navigable
If navigation from both classes were possible, a much more complicated code would be needed. It would be something along these lines, considering a 1-1 association (a *-1 association would require multiple order references to be stored at Date, with yet more complications):
class Order{
Date theDate;
void setDate(Date d)
theDate=d;
d.setOrder(this);
class Date{
int day,whatever;
Order theOrder; //navigation to order
void setOrder(Order o)
theOrder=o;
Care should be taken to ensure proper consistency between references (ie: the order in date should never be changed without making a corresponding change to the new order object).
All this serves to show, you should use navigation sparringly (as needed) , otherwise you're just complicating your code more than you should.
Greets
Jorge -
Generic oracle eway code generation error in Java caps 5.1.3
Hi,
I'm using an oracle eway for adding records to a table. I have a prepared statement in the otd. When I try to build the project I'm getting the following error. Could any one let me know how this problem can be fixed?
com.stc.codegen.framework.model.CodeGenException: Generic Oracle eway code generation error(ERROR_CODEGEN_GENERIC_CODELET_GENERAL)
at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1860)
at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.processCodelets(CodeGenFrameworkImpl.java:640)
at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1544)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
at org.openide.util.Task.run(Task.java:136)
at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
Caused by: com.stc.codegen.framework.model.CodeGenException: Exception when generating OTD code ...Exception: javaClass: Oracle_std_otdOTD: Exception when invoke DB Codegen Task...Exception: Invalid parameter type: Class : [Std_insert_PreapredStat] Object: [Param1] Param Type : [DECIMAL].(ERROR_CODEGEN_DB)(ERROR_CREATE_OTD)
at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateOtdJarFile(OracleEWayCodeletFactory.java:2045)
at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1756)
... 10 more
Regards,
Abdulhi...
i too getting same problem..how did u reslove this...
please help me out...
thanks in advance
KK -
Mappings code generation : regular SQL / cursor PL/SQL
Hi,
When designing mappings, I fear that code generation can be potentially dangerous, because OWB automatically chooses the best method to generate the code (regular SQL or PL/SQL).
I am looking for some examples where code generation for a mapping:
- gives a regular SQL statement
- gives a cursor-based PL/SQL
- a small change in a mapping makes a regular SQL mapping to be transformed in a cursor-based PL/SQL
Thank you
Alexandre
Message was edited by:
Alexandre AbricI have not said that different modes executes at the same way what the use to have different options if they actually mean the same, right? I have said that they produced the same result i.e. if you expect the mapping to insert 1000 rows from the source to the target it will be done no matter which operation mode you choose.
But by different ways. To keep it simple lets say that:
set base mode will result in:
insert into target ( )
select from source;
row based will result in:
begin
for a in (select * from source) loop
insert into target
end loop;
end;
Now lets assume that 5 rows from those 1000 you are going to insert, will break some NOT NULL constraint at the target.
If you choose Set-base mode entire insert from select will fail resulting no rows is inserted into target. Audit trail will contain message like constraint violated and thats it. You will have to find bad records by yourself.
If you choose Row-base mode 995 rows will be inserted (depending on mapping configuration) into the target and 5 will be listed in audit trail with the same constraint violated message.
Thats why default operating mode is Set based fail over to Row based. That means OWB will try to execute mapping in the fastest way set based, but if it fail, it will try again to accomplish the task by running in row base mode, providing complete audit trail fro bad rows. -
Implementing Auto Contract Generation/Negotiation and Execution
Would love to hear from anyone that has implemented auto contract generation/negotiation and execution. Were there any lessons learned you could share during implementation? Were there things you found out - too late? Are you seeing adoption? How long did the implementation take? Pain points along the road? Things you would do differently? We are getting ready to take this trip ourselves and I have a feeling it will not be smooth sailing.
Hello Sravan
Your message isn't clear fo me
If you used import for new master data you can use automatic key generation ability for inbound port
The another way:
You can create special key field in MDM and
create simple workflow which fire when ADD record.
That worklflow call assignment which fill key field
Regards
Kanstantsin
Maybe you are looking for
-
How do I add Adobe Creative Suite to my MacBook Pro...?
@Forgive me for asking what may be a really silly question.... but here goes..! I currently have the Adobe Creative Suite on my Mac desktop and now I'm wanting to add it to my new MacBook Pro. How do I install all the apps without having to purchase
-
Sign In to iCloud always appear on my IP4 screen and likewise draining my battery
anybody pls help me solve this problem, has been happening the past 4 days
-
Hi, are there any programs that can generate automatigally an UML Sequence Diagram from a running Java program? Thanks.
-
How to publish an application developed under eclipse in Web-to-go
I developed a program under surround eclipse. as my wtgpack does not function I am obliged of create a .jar gravel bank and script SQL how then if it is possible I can publish it under Web-to-go
-
Hi, While trying to install Live Cache for SCM 5 i am getting the error as below, INFO 2007-11-28 07:54:10 [iaxxejsexp.cpp:106] EJS_Installer::invokeModuleCall() Working directory changed to /tmp/sapinst_instdir/NW04S/STANDALONE/LC/S