Refactor - Renaming Problem Auto Code Generation

After renaming the java source files (backing beans) to upper case letters (ex. from console.java to Console.java),
JSC is not able to instantiate this class anymore, because the managed-bean.xml is altered automatically.
The next problem is the jsp-file. JSC produces some useless code which points to the new (by JSC) created managed beans (old ones still exist)
example (jsp):
</ui:body>
</ui:html>
</ui:page>
</f:view>
<ui:body binding="#{request$console.body1}" id="body1"/>
(managed-beans.xml)
<managed-bean>
<managed-bean-name>request$console</managed-bean-name>
I�m not able to delete this generated code, because after saving and reloading the jsp-file the inserted code is still there.
In the projects view my java source files are shown in small letters, even if the files are in upper case on the file system (explorer).
I�m using Studio Creator 2 Update 1 (Build 060915)
The project can only be deployed (exporting *.war in JSC) and executed when i change the file attributes to read-only after editing them with a standard text editor.
Any suggestions?

Hi Naveen,
I found these two fms's which would enable automatic item code generation. See if it helps you.
declare @temp as char(20)
IF $[OITM.ItmsGrpCod] = 101
BEGIN
set @temp=(select isnull(max(right(ItemCode,4)),0) + 1 from OITM where (ItmsGrpCod= 101) and (len(ItemCode)=7))
set @temp='DRM'+isnull(replicate(0,4-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OITM.ItmsGrpCod] = 102
BEGIN
set @temp=(select isnull(max(right(ItemCode,4)),0) + 1 from OITM where (ItmsGrpCod= 102) and (len(ItemCode)=7))
set @temp='PKG'+isnull(replicate(0,4-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
And:
DECLARE
@NUM AS CHAR(7)
SET @NUM =
(SELECT RIGHT(MAX(CardCode), 7) FROM OITM)
SET @NUM = @NUM + 1
BEGIN
IF @NUM IS NULL OR @NUM = 0
BEGIN
SELECT 'I0000001'
END
IF @NUM < 10
BEGIN
SELECT 'I000000' + @NUM
END
IF @NUM > 9 AND @NUM < 100
BEGIN
SELECT 'I00000' + @NUM
END
----COMPLETE THE CODE
END
Thanks,
Joseph

Similar Messages

  • Business partner auto code generation

    hi how to create business partner auto code generation. its based on customer group for example we have more customer group..dealer, distributor,subcontractor...
    here dealer and distributor group starting cardcode is - C000001,C000002,C000003..... etc
    when i was choose subcontractor its starts SUB00001,SUB00002...... etc
    vendor is maintain same starting letter in all groups V000001,V000002
    Thanks in advance
    Thanks & Regards
    B.Lakshmi Narayanan

    hi thanks for your valuable replies...
    i changed the codes...pls check its right or wrong
    declare @temp as char(20)
    IF $[OCRD.GroupCode] = 104  and $[OCRD.cardtype] = 'c'
    BEGIN
    set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where (groupcode= 104) and (len(cardCode)=7))
    set @temp='TRA'isnull(replicate(0,7-len(@temp)),'')@temp
    select cast(@temp as char(20))
    END
    ELSE IF $[OCRD.cardtype] = 'C'
    BEGIN
    set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where   (len(cardCode)=7))
    set @temp='C'isnull(replicate(0,7-len(@temp)),'')@temp
    select cast(@temp as char(20))
    END
    ELSE IF $[OCRD.cardtype] = 'S'
    BEGIN
    set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where   (len(cardCode)=7))
    set @temp='S'isnull(replicate(0,7-len(@temp)),'')@temp
    select cast(@temp as char(20))
    END
    Thanks & Regards
    B.Lakshmi Narayanan

  • Auto code generation

    Hi everyone,
    I am new to using LabVIEW (I've come from a background of C/C++, Java, Perl, etc...) and have learned quite a bit about using LabVIEW 7.0.  But what I am finding is that it is horrible about code reuse.  Apparently, from what I can gather, if I wish to reuse code, I need to generate a VI template which is a fancy way of doing copy coding *shiver*.
    So fine, if copy coding is the only way to generate reusable code, so be it, but is there a way of automatically replacing a static typedef with another automatically from a referencing VI?  If I was coding this in C, I would use a sed script to search and replace the type name with another in the files, but given the binary nature of the .vi and .vit files, I don't think that this is an option.
    I can't wait till we move over to LabVIEW 8.x which supports OOP as this will alleviate much of the problems I am seeing.
    Any help anyone can give is greatly appreciated.  Thank you for your time.
    Adrian

    That should have been
    File >>> Save with options >>> single prompt >>> preserve hierachy 
    I wrote a VI that will clone rename and replace a typedef but it is in LV 7.1. Lacking that tool you will have to do the cloning by hand.
    For your icon you use these methods.
    And to save you asking about other things that will require scripting, see the Rusty nails on LAVA.
    Ben
    Message Edited by Ben on 10-03-2007 12:29 PM
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction
    Attachments:
    Icon.PNG ‏23 KB

  • Auto code generate

    hi,
           i am using following query for auto code generation group wise
    declare @temp as char(20)
    IF $[OITM.ItmsGrpCod] = 101
    BEGIN
    set @temp=(select isnull(max(right(ItemCode,6)),0) + 1 from OITM where (ItmsGrpCod= 101) and (len(ItemCode)=7))
    set @temp='FAB'+isnull(replicate(0,6-len(@temp)),'')+@temp
    select cast(@temp as char(20))
    END
    ELSE IF $[OITM.ItmsGrpCod] = 104
    BEGIN
    set @temp=(select isnull(max(right(ItemCode,6)),0) + 1 from OITM where (ItmsGrpCod= 104) and (len(ItemCode)=7))
    set @temp='BRD'+isnull(replicate(0,6-len(@temp)),'')+@temp
    select cast(@temp as char(20))
    END
    but this does not increment code  automatically every time it shows me FAB000001 and BRD000001
    thanks
    rahul

    Solved

  • Code generation problem with deployejb !

    I am working with Oracle 8.1.5 and jdk 1.1.6,
    when I am running the deployejb tool with the HelloWorld example of the demo directory, I have a problem with the code generation of the EJBHome and EJBObject:
    deployejb -u ...
    ... [deployejb found HelloHome.class]
    done
    Generating EJBHome and EJBObject on the server...
    An exception occured during code generation: Class not found : hello.HelloHome.class
    Note my CLASSPATH variable is correctly set.
    Can you HELP me ?
    null

    Adding -W2,-Rcond_elim to the existing flags does make both the small example and the original code compile correctly.
    --David                                                                                                                                                                                                                                                               

  • Problem with Web Service Model code generation

    Hello,
    I'm importing two different web services into the same web dynpro component, which both contains properties "allGroup2" of type "All2".
    This causes some problems with the code generation, first of all the Model-classes can't be generated because they don't know which of the two All2-classes to use. If I fix that problem (which can be easily done by adding the correct import statement) I still can't use the models in my web dynpro component, since it too doesn't know which of the All2-classes to use.
    Even though I can fix this by adding imports and fixing the code, it of course gets regenerated next time I rebuild the project, and my changes are lost.
    Does anyone know how to solve this?

    Apparently this is a known bug which is fixed in SP15.
    Regards mattias

  • Auto item code generation

    Hi Friends,
    My problem is this. My client is want automatic item code generation so how I can do this can you please suggest me.

    Hi Naveen,
    I found these two fms's which would enable automatic item code generation. See if it helps you.
    declare @temp as char(20)
    IF $[OITM.ItmsGrpCod] = 101
    BEGIN
    set @temp=(select isnull(max(right(ItemCode,4)),0) + 1 from OITM where (ItmsGrpCod= 101) and (len(ItemCode)=7))
    set @temp='DRM'+isnull(replicate(0,4-len(@temp)),'')+@temp
    select cast(@temp as char(20))
    END
    ELSE IF $[OITM.ItmsGrpCod] = 102
    BEGIN
    set @temp=(select isnull(max(right(ItemCode,4)),0) + 1 from OITM where (ItmsGrpCod= 102) and (len(ItemCode)=7))
    set @temp='PKG'+isnull(replicate(0,4-len(@temp)),'')+@temp
    select cast(@temp as char(20))
    END
    And:
    DECLARE
    @NUM AS CHAR(7)
    SET @NUM =
    (SELECT RIGHT(MAX(CardCode), 7) FROM OITM)
    SET @NUM = @NUM + 1
    BEGIN
    IF @NUM IS NULL OR @NUM = 0
    BEGIN
    SELECT 'I0000001'
    END
    IF @NUM < 10
    BEGIN
    SELECT 'I000000' + @NUM
    END
    IF @NUM > 9 AND @NUM < 100
    BEGIN
    SELECT 'I00000' + @NUM
    END
    ----COMPLETE THE CODE
    END
    Thanks,
    Joseph

  • Enhanced Flash Builder Code Generation Functionality

    For voting in JIRA:
    https://bugs.adobe.com/jira/browse/FB-27169
    The code generation feature FB 4 currently has is only really useful for quick throwaway prototyping or very simple forms. The generation should allow you to configure formatting via default templates, AND optionally utilize a dialog box (similar to that used in refactoring but with a few extras) so that you can configure the contents of each generated function and provide appropriate function names according to coding best practices. For example:
    -User initiates event handler generation
    (Optional, if Codegen dialog is enabled)
    -User is prompted with a dialog that allows them to customize the generated function name, and possibly specify whether they need an Event parameter passed to the function. (Default to NO event parameter, but this could be a pre-configured user option.)
    -FB utilizes the customized code generation format (customizable by the developer) to generate the new function
    If you need a "submitForm()" function and you want both a TextInput's enter action and a button's click action to call it, currently you're better off typing it all yourself, because auto-generation is going to put this long-named function that assumes you need 'event' passed to it. An event:MouseEvent parameter just gets in the way when you also want a TextInput's enter event to call that function, for example. Or perhaps we want to provide a more descriptive name to each handler (via dialog) without assigning IDs to each and every component: "datagrid1_changeHandler" or "button1_changeHandler" doesn't tell us what the function actually does. It's a basic coding best practice to name functions or methods after the actions they actually perform, and in a large application with complex forms auto-generated generic sounding function names are essentially useless from a maintainability standpoint.

    For anyone interested, I figured it out:
    to generate a CFC, you have to right-click a table in the RDS Dataview, then you can generate a CFC. You cannot generate a CFC from an AS class as described in the CF Builder help within Flash Builder.
    Adobe: it would be nice if this got fixed – and if someone there replied to posts like this. You do  know all this, don‘t you?

  • Error during distribution for compiled code generation-Reply

    Hi,
    Looking at your error messages, it looks as though your build is failing during the code generation phase of an autocompilation. To determine why the code generator crashed, either look in the $FORTE_ROOT/log/forte_ex*.log files or don't use autocompilation and use fcompile.
    There are many reasons why the code generator could crash. Some of the things I've come across are running out of memory and trying to find invalid classes.
    If its the invalid class problem you'll find a message like:
    Generating code for partition BLTCustomWindow_cl0_Part1.
    ERROR: Exiting due to following exception:
    SYSTEM ERROR: Client partition FTCompile_cl0_Client was terminated by escaped
    exception. See the remainder of the error stack for more information.
    Class: qqsp_ResourceException
    Error #: [1001, 3]
    Detected at: qqrt_ForteExecAgent::LoadPartition at 1
    Error Time: Tue Aug 18 17:52:44
    Exception occurred (locally) on partition "Forte_Executor", (partitionId =
    9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
    [9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
    "FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
    FATAL ERROR: Invalid class ProductBMServices.ProductSecurityMgrProxy
    (0x4ecd,0x19a)
    Class: qqsp_ImplementationException
    Detected at: qqcg_TRclass::SetClass at 2
    Last TOOL statement: method ForteCompiler.ProcessPGF
    Error Time: Tue Aug 18 17:52:44
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = 9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
    [9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
    "FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
    The solution for this instance is to clean up the invalid classes using the c4tstdrv utility.
    c4tstdrv > setrepos star8
    c4tstdrv > setwork dmcompiledbuild
    c4tstdrv > open
    Type Service Flags Level
    err sh * 255
    trc rp 1 4
    c4tstdrv > findproj productbmservices
    c4tstdrv > cleanuprtclasses
    Removing extraneous RTclass ProductShootingLocationMgrProxy
    Removing extraneous RTclass PRTerritoryBaseMgrProxy
    Removing extraneous RTclass PRTerritoryMgrProxy
    Removing extraneous RTclass TalentBaseMgrProxy
    Removing extraneous RTclass TalentTypeMgrProxy
    Removing extraneous RTclass TitleTypeBaseMgrProxy
    Removing extraneous RTclass TitleTypeMgrProxy
    Removing extraneous RTclass ProductSecurityBaseClass
    Removing extraneous RTclass ProductSecurityBaseQuery
    Removing extraneous RTclass ProductSecurityQuery
    Removing extraneous RTclass ProductSecurityMgrProxy
    c4tstdrv > commit
    c4tstdrv > exit
    Integrate the changes to the workspace, start the build again and this should have cured the problem.
    However, its hard to know what the cause of your problem is without seeing the output in the log files.
    Good luck.
    Mark Carruthers
    20th Century Fox
    "Forte Consultants" <[email protected]> 01/22/99 08:35am >>>
    Hi,
    I'm doing application distribution for my application using a fscript
    script and am forcing compilation on 2 of my partitions.
    This I have been doing from quite sometime successfully. Recently I
    developed a new service and plugged it into my application for
    deployment.
    I'm successfully able to distribute & deploy the interpreted code. But
    I'm getting a long list of system errors when I try doing distribution
    for compiled code. And I see only one of the .exe generated instead of
    two because of which I'm unable to go ahead with installaion. I would
    appreciate if anybody let me know why this's happening ?. The following
    is the main chunk of this error list.
    Thanks in advance.
    --Anand Ramaswamy
    SYSTEM ERROR: Cannot resolve the distributed reference for an object of
    class
    (qqlo_Object) named (<Unknown>) for the reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 144]
    Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
    Error Time: Fri Jan 22 10:44:22
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Can not initially communicate with the object named
    (Unnamed),
    which is supposed to be in partition
    (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
    Class: qqsp_DistAccessException
    Error #: [601, 140]
    Detected at: qqdo_ProxyMgr::CheckAccess at 1
    Error Time: Fri Jan 22 10:44:22
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Attempt to send to unknown destination partition
    (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
    Class: qqsp_DistAccessException
    Error #: [601, 102]
    Detected at: qqdo_PartitionMgr::SendMsg at 1
    Error Time: Fri Jan 22 10:44:22
    Distributed method called: qqdo_InternalMessage.<Message> (object
    name
    Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
    (partitionId
    = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
    no
    longer exists. The process associated with the partition probably
    terminated.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::CheckStarted at 1
    Error Time: Fri Jan 22 10:44:22
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: This method invocation is being retried because the
    failures
    shown below and the fact that the dialog duration is MESSAGE. This is
    try #2.
    Class: qqsp_DistAccessException
    Error #: [601, 54]
    Detected at: qqdo_Message::Failed at 1
    Error Time: Fri Jan 22 10:44:19
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: The load balanced router is disabled or has no members.
    This
    can happen if all of the members terminated or failed.
    Class: qqsp_DistAccessException
    Error #: [601, 161]
    Detected at: qqdo_LbRouter::Route at 1
    Error Time: Fri Jan 22 10:44:19
    Distributed method called: GenerationMgrProxy.GeneratePartitionCode
    (object name
    site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
    from partition "Fscript_cl9_Client", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
    "fscript",
    pid 4b81 on node MOOSUP in environment IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: This method invocation is being retried because the
    failures
    shown below and the fact that the dialog duration is MESSAGE. This is
    try #1.
    Class: qqsp_DistAccessException
    Error #: [601, 54]
    Detected at: qqdo_Message::Failed at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Access to a load balanced router member (which is a
    service
    object) failed for the reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 162]
    Detected at: qqdo_LbRouter::Route at 2
    Error Time: Fri Jan 22 10:44:15
    Distributed method called: GenerationMgrProxy.GeneratePartitionCode
    (object name
    site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
    from partition "Fscript_cl9_Client", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
    "fscript",
    pid 4b81 on node MOOSUP in environment IGTSDENV
    Distributed method called: qqlo_Object.<Message> (object name
    Unnamed)
    from partition "Forte_Executor", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: Cannot resolve the distributed reference for an object of
    class
    (qqlo_Object) named (<Unknown>) for the reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 144]
    Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
    Error Time: Fri Jan 22 10:44:15
    Distributed method called: qqlo_Object.<Message> (object name
    Unnamed)
    from partition "Forte_Executor", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: This distributed reference was previously invalidated due
    to the
    reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 132]
    Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Asynchronous Failure: Recieved a close from the network
    partner:
    Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
    193.1.11.26 %LINKDISCON, network partner disconnected logical link
    Event 4
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: This method invocation is being retried because the
    failures
    shown below and the fact that the dialog duration is MESSAGE. This is
    try #1.
    Class: qqsp_DistAccessException
    Error #: [601, 54]
    Detected at: qqdo_Message::Failed at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Fri Jan 22 10:44:15
    Distributed method called: qqlo_Object.<Message> (object name
    Unnamed)
    from partition "Forte_Executor", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Asynchronous Failure: Recieved a close from the network
    partner:
    Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
    193.1.11.26 %LINKDISCON, network partner disconnected logical link
    Event 4
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi,
    If this INCLUDE is in a function group go the MAIN program and activate from there.
    Can you list out the include name?

  • Generic oracle eway code generation error in Java caps 5.1.3

    Hi,
    I'm using an oracle eway for adding records to a table. I have a prepared statement in the otd. When I try to build the project I'm getting the following error. Could any one let me know how this problem can be fixed?
    com.stc.codegen.framework.model.CodeGenException: Generic Oracle eway code generation error(ERROR_CODEGEN_GENERIC_CODELET_GENERAL)
         at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1860)
         at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.processCodelets(CodeGenFrameworkImpl.java:640)
         at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1544)
         at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
         at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
         at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
         at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
         at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
         at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
         at org.openide.util.Task.run(Task.java:136)
         at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
    Caused by: com.stc.codegen.framework.model.CodeGenException: Exception when generating OTD code ...Exception: javaClass: Oracle_std_otdOTD: Exception when invoke DB Codegen Task...Exception: Invalid parameter type: Class : [Std_insert_PreapredStat] Object: [Param1] Param Type : [DECIMAL].(ERROR_CODEGEN_DB)(ERROR_CREATE_OTD)
         at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateOtdJarFile(OracleEWayCodeletFactory.java:2045)
         at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1756)
         ... 10 more
    Regards,
    Abdul

    hi...
    i too getting same problem..how did u reslove this...
    please help me out...
    thanks in advance
    KK

  • NI Motion Assistant LabVIEW Code Generation Error

    Hello, the following is my current setup:
    NI PCI-7334 motion control board
    NI UMI 7774 splitter board
    3 x NI P70530 Drives
    3 x NI CTP12ELF10MAA00 Stepper Motors
    3 x Power supply units for drives
    LabVIEW 2010
    NI Motion Assistant 2.6
    Motion and Automation Explorer 4.7
    I have built a three axis motion system that I am trying to configure with labview. After verifying that everything was set up correctly, I opened MAX, updated the firmware to my motion control board, and intitialized the controller. Since then, I have created many basic programs using the Motion Assistant Software to test the movement of my device. Everything works fine while using the Motion Assistant software (I have three axis movement, multidirectional control, and can perform various straight line and arc moves). My problems begin when I try to use the code generation feature.
    When trying to use the code generation feature to output a labview diagram, I run into a problem where a dialog box pops up and says "Find the vi named ...."
    Some examples of the names that come up are: Configure Vector Space.flx, Vector Space To Control.flx, Motion Error Handler.flx.
    To be clear the program in Motion Assistant that I am trying to export to LabVIEW code is composed of two individual steps. One that tells X,Y, and Z motors to move forward 25 revolutions, and one step that tells them to move backwards 25 revolutions.
    I have made many other programs in Motion Assistant that run fine, but I always receive similar errors when trying to use the code generation feature to export to LabVIEW. Is there something that I can do to solve my problem?
    Thank you for your help.

    Hi Joe,
    I am using Ni-Motion Assistant 2.6, Ni-Motion 8.1, and Motion and Automated Explorer version 4.7.
    The code I posted is supposed to tell Axis 1 to move 40 revolutions at 400 rpm. It works fine in Ni-Motion Assistant but when I try to generate a LabVIEW diagram I receive the following error, "Find the VI named 'Motion Error Handler.flx'". I have had it search my directory, as well as the disk that I installed both LabVIEW and Ni-Motion but no luck. Thanks for your help.
    Attachments:
    1111.vi ‏9 KB
    1 axis movement.zip ‏8 KB

  • Code Generation and Optimization

    hi,
    we have been looking into a problem with our app, running in a JRockit JVM, pausing. Sometimes for up to a second or so at a time.
    We enabled the verbose logging of codegen and opt.
    And we see entries like:
    [Fri Sep  3 09:51:38 2004][28810][opt    ] #114 0x200 o com/abco/util/Checker.execute(Lcom/abco/util/;)V
    [Fri Sep  3 09:51:39 2004][28810][opt    ] #114 0x200 o @0x243c4000-0x243c7740 1186.23 ms (14784.88 ms)
    So the optimization took 1186 ms.
    Does this optimization happen in the main thread?
    I.e., is the above message an indication that the app had to stop for 1186ms while the optimization occurred?
    Any help on this would be greatly appreciated!
    Also, does anyone have any more pointers to info on the code generation and optimization in JRockit?
    I have only managed to find the following:
    http://edocs.beasys.com/wljrockit/docs142/intro/understa.html#1015273
    thanks,
    JN

    Hi,
    The optimization is done in its own thread and should not cause pauses in your application.
    The probable cause for long pause times is garbage collection. Enable verbose output for gc (-Xverbose:memory), or use the JRockit Management Console to monitor your application. Try using the generational concurrent gc, -Xgc:gencon, or the gc strategy -Xgcprio:pausetime. Read more on: http://edocs.beasys.com/wljrockit/docs142/userguide/memman.html
    If you allocate a lot of small, shortlived objects, you might want to configure a nursery where small objects are allocated. When the nursery is full, only that small part of the heap is garbage collected at a smaller cost than scanning the whole heap.
    If you need help tuning your application, you could make a JRA recording and send to us: http://e-docs.bea.com/wljrockit/docs142/userguide/jra.html.
    Good luck,
    Cecilia
    BEA WebLogic JRockit

  • Code generation error when implementing an accumalator

    Hi everyone,
    I am implementing an accumalator which implements X = X + Y where X and Y are memories of length say 5. Initially I write 5 values into X and Y using a for loop. Then I perform the addition inside a single cycle timed loop and store the results in a temporary buffer(another memory) again of length 5. In another single cycle timed loop, I copy the data from the temporary buffer to memory X.
    I changed the arbitration option to never arbitrate for X, but I get a code generation error because of arbitration. Could anybody please tell how to solve this problem.
    Regards,
    Prashant
    Solved!
    Go to Solution.

    Hi NitzZ
    I figured out a way to solve the problem. I chose the "Never Arbitrate" option for all memories and replaced the for loop with a timed loop. Now there are no errors.
    Thanks,
    Prashant

  • Code generation bug in C++ 5.0

    The enclosed test program generates incorrect code
    with C++ 5.0 when -g is not used.
    The problem showed up in our production code
    and concerns any reference counted smart pointer
    implementation.
    The test program is specifically written to demonstrate
    the problem and diagnose a reference miscount.
    With any optimization at all (without -g, and/or with
    any level of -O including no -O) it generates
    incorrect results. With -g the results are correct.
    gcc compiles this correctly with any optimizations
    selected.
    // main.cc
    // test program to demonstrate code generation bug in
    // Sun WorkShop Compilers C++ 5.0
    // bug exhibited as of 27th April 2001
    // relevant patches applied:
    // 107289-05 Packages: SPROcc
    // 107390-12 Packages: SPROtl7x, SPROsclx, SPROtll7x, SPROcplx, SPROlgcx
    // 107311-12 Packages: SPROscl, SPROtll7, SPROtlbn7, SPROcpl, SPROgc, SPROlgc
    // 107357-11 Packages: SPROlang
    // correct behaviour with CC -g:
    // CC -g main.cc -o main; ./main
    // incorrect behaviour with CC (no -g):
    // CC main.cc -o main; ./main
    #include <stdio.h>
    class O {
    public:
    inline O() : m_refCount(0) { };
    inline void ref() { m_refCount++; }
    inline void deref() { m_refCount--; }
    inline int refCount() { return(m_refCount); }
    private:
    int m_refCount;
    class R {
    public:
    inline R() : m_object(0) { };
    inline R(const R &r) : m_object(r.m_object) { if (m_object) m_object->ref(); }
    inline R(O *o) : m_object(o) { if (o) o->ref(); };
    inline ~R() { if (m_object) m_object->deref(); }
    inline R &operator =(const R &r) {
    if (this == &r) return(*this);
    O *o = m_object;
    if (m_object = r.m_object) m_object->ref();
    if (o) o->deref();
    return(*this);
    inline R &operator =(O *n) {
    if (m_object == n) return(*this);
    O *o = m_object;
    if (m_object = n) n->ref();
    if (o) o->deref();
    return(*this);
    inline operator O *() const { return(m_object); }
    inline O *operator ->() const { return(m_object); }
    private:
    O *m_object;
    class B {
    public:
    inline B(const R &r) : m_ref(r) { };
    inline const R &ref() { return(m_ref); }
    private:
    R m_ref;
    R buggy(int notnull, B &b)
    return(notnull ? b.ref() : 0); // BUG HERE
    int main()
    O o;
    R r(&o);
    B b(r);
    int i;
    for (i = 0; i < 20; i++) {
    R s;
    s = buggy(!0, b);
    printf("refCount: %d (should be 2)\n", o.refCount());

    How do I file a bug report for this and get
    a bug ID assigned?

  • Code Generation Error - SUP 2.2 / SUW 2.2

    Hi,
    I have formatted my laptop PC and re-installed Sybase Unwired Workspace 2.2. After the installation I get Code Generation Error message:
    Before Code Generarion attemp the Java Build Path / Source tab is empty and after the Code Generation the error specified above is generated and the following path is added to the Java Build Path / Source tab:
    XXX/Generated Code/src (missing)
    I cannot resolve the problem. Does anybody has idea about the problem?
    thanks,

    Hi,
    1. I created a new model having only one MBO and generated code successfuly.
    2. The result is the same after deletion of "Generated Code" and creating new folder
    3. The result is the same after generation code to another folder.
    nothing has changed but I discovered additional information in the "workspace\.metadata\.log" file:
    com.sybase.uep.tooling.codegeneration.coordinator.CoordinatorException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
      at com.sybase.uep.tooling.codegeneration.coordinator.impl.ClientObjectAPICoordinator.sendRequest(ClientObjectAPICoordinator.java:115)
      at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.sendRequest(CodeGenerationJob.java:200)
      at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.processTasks(CodeGenerationJob.java:172)
      at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.runInWorkspace(CodeGenerationJob.java:123)
      at org.eclipse.core.internal.resources.InternalWorkspaceJob.run(InternalWorkspaceJob.java:38)
      at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
    Caused by: com.sybase.uep.tooling.codegeneration.clientobjectapi.ClientObjectAPIException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
      at com.sybase.uep.tooling.codegeneration.coordinator.CoordinatorException.<init>(CoordinatorException.java:27)
      ... 6 more
    Caused by: com.sybase.modeling.templatej.runtime.adapter.impl.NoSuchMemberException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
      at com.sybase.uep.tooling.codegeneration.CodeGenerationException.<init>(CodeGenerationException.java:26)
      at com.sybase.uep.tooling.codegeneration.clientobjectapi.ClientObjectAPIException.<init>(ClientObjectAPIException.java:27)
      at com.sybase.uep.tooling.codegeneration.clientobjectapi.impl.ClientObjectAPIDelegator.generate(ClientObjectAPIDelegator.java:155)
      at com.sybase.uep.tooling.codegeneration.coordinator.impl.ClientObjectAPICoordinator.sendRequest(ClientObjectAPICoordinator.java:86)
      ... 5 more

Maybe you are looking for

  • Trouble with .dwt (i have provided photos of code)

    Ok I work for a university and I am working on work that other people have done. They have created a main.dwt file that sets the framework for the site.  I needed to add a button to the top menu bar and to edit the menu bar you must be in the .dwt fi

  • OCS 2007 R2 to )365 migration

    I've Exchange 2007 & OCS R2 deployed in On-Prem, and we planning to moved to O365 and de-commission our Exch & OCS R2. My question once we moved O365, the users who are using OCS how can they access Online lync once we de-commission our OCS and clean

  • Unable to install new version of app without deleting old one first

    When I get a new version of an app from my developers (with ad-hoc provisioning), if I just drag it to iTunes and then try to sync with my phone, the app does not make it over. Itunes/iphone dont realize that the new version needs to be installed. I

  • Display Personal Data Screen

    Hi, How can I change the layout of the display when I display Personal Data(PA20)? I would like to display the Personnel No, EE group, EE subgroup, Pers. area and valid from. In this first screen I would like to display the Name and HR data tabs too.

  • RUN ALLOCATION

    Hi All, *RUNALLOCATION *FACTOR=USING/100 *DIM ACCOUNT  WHAT=570927; WHERE=570999; USING=CRITERIA1 *DIM ENTITY WHAT=31400; WHERE=31300; USING<>31300 *ENDALLOCATION This allocation works fine.But I would like to execute this for all accounts(source) in