Auto create chapters??

Hi,
Is there a way to automatically create chapter markers in an iMovie project?
Cheers

OK then, how about a way to auto-create chapters either:
in iDVD when sending the movie from iMove to iDVD (i.e have iDVD create a chapter at the start of each iMovie clip), or;
in iDVD when doing a One-Step DVD from a connected DV camcorder?

Similar Messages

  • Alternative to GarageBand for creating chapters in podcasts?

    Now that GarageBand no longer has podcast-creation-specific features, I'm wondering if there's another way to create chapters in podcasts. Anyone know? I know I can just keep using the old version, but I'd like to find a solution that hasn't been discontinued.

    Hi Photosphere,
    Apologies for the delayed response, my daughter was born on Sunday.
    Thanks for taking the time to try our product.
    Could you please explain what podcasting features you feel are missing?
    Some of the podcasting features that many thousands of our professional and amateur podcasting customers appreciate are:
    * Create chapters (which is what this thread started with)
    * Auto-leveling of recording based on Loudness
    * User-friendly interface
    * Voice Profiler that analyses your speak and sets the EQ and compression for you so you sound the best every time
    * 1-click podcast allows you to upload your podcast to multiple destinantions (SoundCloud account, Podcast server, FTP etc) with one click in the correct format, amnd updates your RSS feed at the same time
    * Extremely fast support response
    You might find more of the features you are looking for in our Video Tutorials: http://hindenburgsystems.com/training-videos
    Addressing your comments:
    - Regarding pricing - unfortunately the podcasting and radio markets are not that big. Selling it for "a decent price and getting more customers" assumes that there are a lot of people that actually would buy software to make a podcast. Our analysis is that this is not the case - if we lower our price we will not sell significantly more copies of our software. $95 for a highly advanced software tool is not much compared to the price of a microphone or whatever recording device you use for your podcast, is it?
    - "Your website is out of date, the registered trademark of your company site is 2011" - Normally a trademark date is the date a trademark is registered - it doesn't really change. I'm not quite sure what you are refering to.
    - "I find it hilarious that you chose the company name to be Hindenburg Systems... Hindenburg crashed and burned" - A little radio history, the event of the Hindenburg crashing is one of the most important daes in radio/recorded story history. It was the first ever mobile news report and the first ever report broadcast coast-to-coast. Besides that, Hindenburg is a surname, so there are other connotations than the limited history of one event in Lakehurst in 1937.
    I hope that clarifies things a bit?

  • I can't get garageband to export!  It keeps getting stuck at 'creating chapters' when I try to export my enhanced podcast.  Please help!

    I am trying to export my enhanced podcast through garageband.  I have all the current updates.  I am on my MacBookPro 10.6.8 2.3GHz with 8GB ram.  My enhanced podcast (podcast with pictures) is about 80 mins long and I have tried exporting with everything from the lowest settings to the highest always with the same result.  I have tried deleting GB preferences.  I have tried repairing permissions to no avail.
    I hit export to disk or send to itunes.
    I select some AAC format I want (optimized for spoken podcast).
    It slowly builds the mix, normalizes, and creates chapters (yeah, it goes through the creating chapters bar to completion)
    Then it goes all candystripe on the creating chapters bar once it fills up and will hang forever (hung for 8 hours....pretty much sounds like 'forever' in my book).
    Please help...I have my podcast sitting there waiting to be used....I have tried exporting smaller chunks (by moving the end of file bar) but that doesn't work either.  Is there a way to just send the pictures and the picture start times over to imovie and work with it there?  I'd much rather work with the tools that imovie has but man that program is just a PITA to use when you want to run through 100+ pictures for variable durations (whereas it's easy to just drag and drop with garageband as you do playback).
    The file only has one stereo audio track!

    Hi notmatthew, I have exactly the same problem as you. I am trying to export a podcast about iPod X Anniversary so I need to publish it next sunday.
    It's midnight in Spain but tomorrow I will tray something I read in other post:
    w4b3l said:
    Problem solved.
    I deleted the chapters one by one, exporting it each time, until it worked. i then replaced the image (which was a .jpg and i converted to .png) with that chapter and now it works.
    Could you try it?

  • PO CNV: Auto-Create POs from PUR Reqs generated by OM

    Objective: Convert open sales orders and maintain the link to the purchase order for back to back and drop shipment sales orders? 
    Question: Is it possible to convert the sales orders first.  Then run requisition import to create the purchase requisitions in the PO module.  After the requisition lines are created, convert the purchase orders through the open interface table or an API by auto-creating the PO from the requisition lines?  This would maintain the link between purchasing and order management.
    If this is not possible, does anyone have any suggestions?  Someone mentioned using BPAs (this assumes I can assign items to specific suppliers).
    Any ideas are greatly appreciated.
    Thanks

    Hi,
    After creating a PR, why you want to go thru open interface.
    There is a standard functionality : AUTOCREATE, available , which will convert the PR to PO.
    On PO Shipment level, you can view the SO number & Line Number also.
    Please review the below link.
    Oracle Applications - Functional: Business Flow of Drop Ship Order

  • Auto-create delivery for multiple sales orders

    I would like to ask how to create auto-create 'single' delivery
    for multiple sales order during release sales order in R11i.
    It is found in my example during release sales order, multiple
    sales orders fulfill release sales order criteria, a single pick
    slip is generated but it is found that each sales order have
    individual delivery with it. It will casue multiple pack slips
    for a singles pick slip. Is it normal feature for auto-create
    delivery, or any setup to solve it?
    Thanks in advance.

    Am not able to do Single Delivery for Muktiple sales orders
    Have you searched the forum for this question as to why you were not able to generate ??  It could be due to multiple reasons.  Please search the forum and update here what steps you have taken after taking the inputs from here, if the problem is still not resolved.
    thanks
    G. Lakshmipathi

  • Auto Create service order from incoming email

    Hi,
    We have a requirement that we want to create service order with a default transaction type automatically from an incoming email. Also we want to route this service order to a specific service group on creation an above.
    How can we handle this? I know we can create a rule policy with an action to auto create a service order. My question is how do we set up that this service order is of a particular transaction type and has the default routing to the specific service group..
    Thanks
    Dan

    Hello Dan,
    You can specify the transaction type (for ERMS auto-created Service Orders/Tickets) via IMG configuration. In transaction CRMC_ERMS_SM_PROF you select the DEFAULT service manager profile and open the folder "Indirectly Called Services". Then you can specify the transaction type for each of the relevant service IDs: AH_CREATE_SO and AH_CREATE_SR.
    Best regards,
    John

  • Sound Icon Greyed Out - Midi AutoAggDevice auto-created

    Whenever I restart my computer or log out/back in, the sound icon in the menu bar is greyed out. When I check the sound preferences in system preferences, it says that the output is: "AutoAggDevice". I gain back control after selecting "Internal Speakers". I have tried setting them as my default, but it always defaults to "AutoAggDevice".
    I have gone into the MIDI preferences (Audio Midi Setup) and there are many extra devices, but when I try and remove them, they come right back after a restart. I wouldn't mind if it wasn't affecting my default output, but it is getting really frustrating.
    I have also run a repair disk permissions to no avail.
    Does anyone know how to permanently delete these auto-created midi devices or at least get the default audio setting to stay as internal speakers?
    Thanks.
    MBP, 13 inch Retina, Late 2013 model
    OS X 10.10.2
    2.4 GHz Intel Core i5
    8 GB 1600 MHz DDR3

    Resetting PRAM may help.
    Reset PRAM.  http://support.apple.com/kb/PH14222

  • How to clear interco vendor/customer which auto created during interco pstg

    Hi all,
    During intercompany posting, system auto created vendor/customer line items.
    When and how these created items to be clear out?
    TQ

    Hi,
    Please go through below thread:-
    [Inter company AR/AP open item clearing - Urgent;
    Regards,
    Gaurav

  • Auto created line item in J1inchln

    Sap Gurus
    while doing J1INCHLN extra line is creating for WCT liability account.
    FS10n WCT liability account is showing credit balance of Rs 125000
    while updating challan one extra line item in credit side is generating by system automatically for Rs 3150 and debit the Liability account, by crediting the Govt. as vendor account by 128150.
    WCT liability A/C        Dr       128150
    Govt. Vendor A/C      Cr       125000
    WCT liability A/C       Cr         3150…………….Auto Created
    Why this entry is generating Please suggest.
    Pavan

    Hi Pavan,
    Check the Govt. Vendor master - withholding tax tab, whether any TDS payment related tax codes are assigned.  If so remove them and run the transactions again.
    Hope it helps

  • Porject code from requisition not going to PO from auto create

    Hi
    We are adding a project code to the requisition.
    and after all approvals for the requisition
    we want the project code which is a 4 digit number to populate the dff on the PO form when we use auto create function.
    please let me know how can we go about this.
    thanks

    suspecting a known issue:
    Refer MOS NOTE:
    Requisition Distribution DFF Values Not Copied To Purchade Order Distribution DFF During Autocreate (Doc ID 976943.1)
    The file versions which contain the updated trigger definition are:
    Rel 11i : popch80.sql v. 115.4.11510.5 or later
    Please check for relevance

  • How do i create chapters of a book in Adobe Reader?

    My English 101 professor has given us thee entire text book for this semester in a .pdf file. It is very hard to navigate through. is there a way i can manually group the pages, creating chapters? i want to upload it for our entire class as a revision.
    I am runinng Adobe Reader X 10.1.4
    Thanks,
    Du-Marc Mills

    You cannot edit PDF files with Adobe Reader; you will need Adobe Acrobat.
    If this is a one-time task, download the trial version of Acrobat, which will be fully functional for 30 days.
    However, normally such a task should be performed on the original document, before the PDF is created.

  • I am no longer able to create chapters in my Apple TV files

    I am no longer able to create chapters in my Apple TV files.  When I first started editing on the Mac (November 2009) I had a brand new iMac and Snow Leopard.  With Snow Leopard came a 'special' version of QuickTime (QT X?) which were told not to update to 'Pro' (QT 7 Pro).  My process was to use FCE with chapter markers to export my home videos to a QuickTime file.  FCE created a beautiful .mov file with embedded visual chapters as I had marked them.  It imported fine into iDVD.  The next step was to 'Save As' within QuickTime and choose to save with the Apple TV profile.  The .mov file would be converted and everything, including Chapters, would go with it.  From Apple TV, I could peruse my home movies and dig deeper via chapters.  Amazing and totally cool.
    About 9 months ago, maybe a year, the chapters were no longer saving with the Apple TV format.  This meant that each hour long home movie could not be accessed via chapters.
    Was this functionality removed from QuickTime X?  Is there any way to get it back?  I am almost a year behind in my editing since I can no longer easily get the chapter markers in.
    Thanks,
    D.

    im glad that somebody is atleast trying. perhaps i need to be more clear.
    i will step by step describe the issue in detail.
    1) i open an email that contains an attachment .dxf or .pdf
    2) i click on the attachment shown in the email and aprompt comes up asking if i want to open or save the attachment.
    3) i select save. (by default it saves to a downloads folder. but i have also chosen to use other folders (when i did that it wouldnt save them)
    4) i highlight the downloads arrow on the right top side of my browser and click it
    5) it pulls down a list of the files that i USED to be able to click and drag onto my destop, or anyplace i chose
    6) used to be when i clicked and held the left mouse button down on top of a file of my choosing it would highlight and as i began to drag, a ghost image would appear of the file i was dragging. showing a (/) symbol next to it showing i couldnt drop the file within the browser and a + simbol showing that i could drop the file when the file was hovering over a place where i could drop the file such as my desktop or other folder. now, when i click and hold on the file.... I DONT get anything. when i drag. nothing follows. while i am "dragging" in the area that is my browser, i get the pointy finger icon. as soon as i enter an area where i could have dropped the file as before, i get my standard cursor arrow.
    its really as if the drag and drop feature just dosent work IN FIREFOX.
    i can drag and drop files all day long everyplace else.

  • IPad Air - photo auto created in gallery issue

    Hi everyone!
    Not sure if anyone found this issue before, the identical photo has been auto created in gallery (iPad Air 7.1.1) many times. I never took the photo myself. it just looks like it came from the internet but I never saved. I wonder if this is a bug and how should i do to solve the issue.  Many thanks in advance !!

    It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
    Note that this can't happen if your iPhone is not connected to a WiFi network:
    When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
    iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
    Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
    PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
    from here: http://support.apple.com/kb/ht4106

  • Auto create request by reading a row in MS SQL table?

    Auto create request by reading a row in MS SQL table?
    If all required data for a particular request type were included in a row of a MS SQL db table (staging table), could a request be created using a db adaptor?  Or is web services the only option to auto create a request?

    By definition, a DB adapter is part of ServiceLink and ServiceLink handles task-level integration, ie, it can externalize a task that's in a request that already exists. Web Services is the only option to create a new request.

  • Creating Chapters in PDF documents?

    How do you create chapters in PDF documents, similar to the way Apple has done it with their user manual PDFs on the support section?

    Hi Allen,
    I spent a bit of time looking at your interesting query, but am afraid I cannot find any solution to it.
    If you want to send the document via email, and therefore need the hyperlink, your best bet might be to send it as an HTML document. I don't know if you can achieve the transformation to an HTML document using traditional SAPScript though, but it is possible with Smartforms.
    Martin

Maybe you are looking for