Auto-enter text in linked email doc?

Hi-
Apologies for my lack of HTML prowess...
I'm creating a website using DW8, with a page that has a
number of different email links to various government officials.
Because the messages to each of the recipients is different, I was
hoping to be able to program Dreamweaver to auto-insert specific
text into whatever email composer pops up when users click on the
email link as it appears in their browsers. Is this possible? If
so, is it very complicated? Thanks for any and all leads.
RD

OK. Never mind my previous post. I found the ASCII line break
code that did the trick.
Everything is working fine with one exception:
Once I post this to the server for testing, one of my test
email clients (Outlook Express 6) ceases to open the document if
the body exceeds 190 words (1085 characters, 1270 including
spaces). If I upload the total doc (293 words, 1657 characters,
1943 wtih spaces) the link does nothing when clicked upon. As a
test, I tried omitting the top of the body text to see if there was
some code in the tail end that was screwing things up, but it works
under a certain word count, so apparently, it is not defective code
in the body.
i realize this is getting kind of obscure, but, is anyone
aware of any issues that might cause this behavior in Outlook
Express? My other test client is Apple's "Mail." That seems to be
working properly. Normally, I wouldn't care, as I spend most of my
time in Mac, but this thing has to work for everyone.
Thanks for any insight.
RD

Similar Messages

  • Auto enter text

    What can i enter in script Editor to make it so when i run the script, it enters a specific text into another program's textbox area, then delays 5 seconds, and enters another text?
    I want it somewhat like this:
    Enter this text:
    /server server.domain.net
    /nick MyNickname
    Wait 5 seconds
    /ns id password
    /join #channel
    <End>
    I am wondering if maybe there is a way i can just double click the script to run it, wait a second or two to give me time to Tab to the IRC program, and have it start typing away at the commands?
    Message was edited by: Sackmannn

    I used TextEdit in this example because I no longer have an IRC client. There also may be better ways to accomplish this based on what IRC client you are using.
    --> Cut <--
    set L1 to "/server server.domain.net" & return & "/nick MyNickname" & return
    set L2 to "/ns id password" & return & "/join #channel" & return
    tell application "TextEdit" to activate
    tell application "System Events" to tell process "textedit"
    keystroke L1
    delay 5.0
    keystroke L2
    end tell
    --> Cut <--

  • Auto populate text fields with a trigger such as entering text into input fields in ADF

    Hello all,
    I am not able to auto populate text fields with a trigger such as entering text into input fields in ADF.
    I tried AdfFacesContext.getCurrentInstance().addPartialTarget(val); in the back end using setter method of input text field.
    its not working ..
    is there any way to achieve it
    Regards,
    Shakir

    Hi,
    Always mention your JDev version.
    The valueChangeListener would fire only when you set the autoSubmit property of the field to true. Can you elaborate your requirement? What do you mean by related data? Are you performing some sort of search?
    If you want to get the value you entered on the field, just set autoSubmit to true and get the new value from the valueChangeListener. If your requirement is something like as and when you type, do something, you need to check out this approach :https://blogs.oracle.com/groundside/entry/auto_reduce_search_sample
    -Arun

  • Why does aol not auto enter email addresses when I compose an email?

    why does aol not auto enter email addresses when I compose an email?

    what a ridiculous decision to change from "starts with" to "contains".
    I have a further problem - having selected the address I want from the umpteen options pulled from my address book, I then press enter to add another line for another address.....and the first address I selected changes to a completely different address!
    And also addresses from the address book which previously appeared only in black now randomly appear in red.
    help please!

  • In adobe reader app on iPad, I have a PDF document that added notes and comments to.  Once I left the document and returned to it, the notes and comments were gone.  Where are they?  I clicked "save" and "done" buttons after I entered text.

    In adobe reader app on iPad, I have a PDF document that added notes and comments to.  Once I left the document and returned to it, the notes and comments were gone.  Where are they?  I clicked "save" and "done" buttons after I entered text.

    The application auto-saves your input when you close the document.  If you left the document, as you state, the notes/comments should have been saved and should have been visible the next time you opened the document with the Mobile Reader (note that if you are opening the document with another app such as Apple's built in PDF Viewer, things like notes/comments may not be visible).  Also note that if you are doing an Open In... from another app (like Dropbox), the version of the document in Dropbox does not update; only the version of the document in the Mobile Reader is updated.
    Would it be possible to send a video of the problem you are encountering to [email protected] so that we can try to help?

  • ANNC: divaLINK - convert text into links, automatically

    I am happy to announce the release of a new Extension for
    Dreamweaver:
    divaLINK. Using unobtrusive javascripting, it will convert
    plain text
    urls to hyperlinks, and (optionally) plain text email
    addresses to
    mailto: links, all on-the-fly in the browser.
    I foresee two main applications for divaLINK:
    1) Your client supplies you with pages of content which
    contain plain
    text urls and email addresses, and naturally wants them all
    linked.
    You've been doing this tedious task manually for years.
    Haven't we all?
    2) Your pages are dynamically driven (i.e. the content is
    supplied by a
    database) and you'd like the urls and email addresses within
    it to be
    real links. Up until now there was no way to accomplish this
    on the
    server side.
    In addition to the automatic linking, options are offered to:
    * add a subject to the mailto: link
    * replace the visible email address with boilerplate text
    * add "rel=nofollow" to the created <a> tag
    * insert <wbr> tags to allow conditional wrapping of
    long urls and
    email addresses
    I do hope you find it useful.
    http://www.divahtml.com/products/divaLINK/convert_text_to_links.php
    E. Michael Brandt
    www.divaHTML.com
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

    Thanks - makes sense....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "E Michael Brandt" <[email protected]> wrote
    in message
    news:flmbiv$6q3$[email protected]..
    > Murray *ACE* wrote:
    >> It's very interesting - where does the subject line
    for the email links
    >> come from?
    >
    > You enter the subject line in the UI, so it is same for
    all instances,
    > however there are a few variables you can use to assist
    you - @site@
    > @path@ and @page@ .
    >
    > > And the benefit of this is that you lose the
    "mailto:" flag
    > > in the source?
    >
    > hmm, well first, adding a ?subject= would not do that
    anyway. The
    > mailto: is still there. My googling research has told me
    a few things -
    > among them that most email address-scraping does not
    depend on the mailto:
    > flag, just the address format [email protected] Since the bad
    guys are seeing
    > these pages without javascript, that address format is
    there no matter
    > what I might do with javascript to try to hide it
    after-the-fact, assuming
    > obscuration helps anyway. Most of the modern results
    seem to be pointing
    > to better spam-blocking rather than attempting to
    obscure at the source.
    >
    > The option to replace the email address with
    boilerplate, which is what I
    > think you were really asking about, meaning replacing
    the visible address
    > with e.g "Email" or "Contact them" is only cosmetic, is
    simply the linked
    > text that appears visibly on the page for users to see
    and click.
    >
    >
    > --
    >
    >
    > E. Michael Brandt
    >
    > www.divahtml.com
    >
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    > Standards-compliant scripts and Dreamweaver Extensions
    >
    > www.valleywebdesigns.com/vwd_Vdw.asp
    > JustSo PictureWindow
    > JustSo PhotoAlbum, et alia
    >
    > --

  • Dropdown list (predefined list) along with provision for user to enter text

    Hi,
    Is there any provision in J2ME to have
    " a drop-down list , which contains predefined variables. if the user does not want to use those predefined variables, then a provision for user to enter text."
    thanks in advance

    Append Method
    I would create a box / div in Animate then when you publish it and put it on your page just append a form with an email input ( <input type="email></input>" ) and submit button.
    <form action="url">
      <input type="email" name="usremail">
      <input type="submit">
    </form>
    This page provides a lot of information on how to use Edge Animate and how to do more advanced things.
    http://www.adobe.com/devnet-docs/edgeanimate/api/current/index.html

  • I would like to know how to fix my safari. There are many pages that the text and links appear as "AAAAAAA" and I dont know where to click or what to do

    Please if anyone knows how to solve this problem, I bought this mac brand new, first time using it and many pages dont render the texts or links. It shows it like a series of "A"s.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • Plain Text URL links not working in the Windows 8 Mail App for only one account.

    Hello,
    I just started using a Surface Pro, and randomly one of the accounts I have setup in the "Modern" Mail app stopped parsing the pain text URL path that was included in them.  Specifically links to forum discussions.  I have 4 other Win
    8 devices and they display the links fine.
    More confusing is this issue happens ONLY with my O365 mail account and only on one PC.   I have an Outlook.com account and it renders the pain text URL as a clickable link, but when I send the same email to my O365 account it just shows up as
    text, no link generated.  All in the same Windows 8 Mail App.
    I ran the Windows 8 App Troubleshooter, I've reinstalled the Mail app,  I've removed and re-added the mail account.  Nothing fixes this.  Anyone know why?
    Thanks,
    Joe

    Same problem for us, the link is also not rendered, if the mail is sent to an on-premise Exchange server.
    Its only for plain-text messags, HTML-messages work fine.
    Why is this problem ignored? The app is useless with that limitation.

  • I cannot enter text in the iTunes search box

    I'm having a really bizarre problem with iTunes latest version (10.5,0.142). When I click in the search field in the upper right-hand corner of the program, I cannot enter any text--no text cursor appears.  I can click on the little down arrow next to the magnifying glass and select "All," or "Artist," or "Album," etc, but I'm not able to enter text. It's like the focus doesn'tshift from the Library pane and any letters I type just cause the highlight for that window to drop down to the closest match to the character I typed, even though the focus has shifted to the search pane.
    I've tried uninstalling and reinstalling iTunes, but that does not correct this misbehavior.
    Not sure if it's related, but I also no longer have the text menus available at the top of the window, whether the program is maximized or minimized and taking up only part of the screen (this is not a screen clipping problem--those text menus are no longer there, though you can get very small hotspots to appear near the upper left hand edge of the program window (when you have the program window in normal mode, rather than maximized), where those text menus would be, and if you click on the hotspots, the menus do appear.
    But, by far, the first issue is the most perplexing.

    Solved: This was caused by replacing the SegoeUI (Regular) true-type font. I have no idea what process or why that font was deleted, but finding the segoeui.ttf file on another Windows machine, emailing it to myself, saving it to disk, then right-clicking and choosing "Install" fixed this problem.

  • [svn:osmf:] 15865: FM-505: Add text to link instead of displaying URL

    Revision: 15865
    Revision: 15865
    Author:   [email protected]
    Date:     2010-05-02 19:22:20 -0700 (Sun, 02 May 2010)
    Log Message:
    FM-505: Add text to link instead of displaying URL
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-505
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/elements/F4MElement.as

    Hi,
    Solution is very simple:
    <af:column headerText="company">
    <af:commandLink text="#{row.Company}">
    <af:setActionListener from="#{row.rowKeyStr}"
    to="#{requestScope.currentRowKey}"/>
    </af:commandLink>
    </af:column>
    On the detail page in PageDef.xml add action (for the same iterator)setCurrentRowWithKey - as argument set #{requestScope.currentRowKey}. Don't forget invoke this action when page is loading setting Refresh Condition= #{adfFacesContext.postback == false}
    Kuba

  • [svn:osmf:] 15864: FM-505: Add text to link instead of displaying URL

    Revision: 15864
    Revision: 15864
    Author:   [email protected]
    Date:     2010-05-02 19:21:01 -0700 (Sun, 02 May 2010)
    Log Message:
    FM-505: Add text to link instead of displaying URL
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-505
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/net/StreamingURLResource.as

    Hi,
    Solution is very simple:
    <af:column headerText="company">
    <af:commandLink text="#{row.Company}">
    <af:setActionListener from="#{row.rowKeyStr}"
    to="#{requestScope.currentRowKey}"/>
    </af:commandLink>
    </af:column>
    On the detail page in PageDef.xml add action (for the same iterator)setCurrentRowWithKey - as argument set #{requestScope.currentRowKey}. Don't forget invoke this action when page is loading setting Refresh Condition= #{adfFacesContext.postback == false}
    Kuba

  • Solutions for User Decision step- Upon reject, auto-popup text for reason

    Execute user Decision workitem, when user click reject button, open text for rejection reason within the workitem.
    Ideally, for the auto-pop text , we need a descriptive header and user can enter reject reason. Text must be added before the workitem can be saved.
    Any thoughts.
    Thanks a lot.

    yes, on the SOFM.Create-Task use a dataflow from the WIOBJECT_ID => (append table) ADHOCOBJECTS
    This will popuplate this rejection to the hyperlink-section of the workflow.
    You may also activate the outcome-even "user-cancelled" in the workflow definition (or by copying the coding to your own method that could do it) and loop around back to the user decision if he cancels the document create (which I found out is sometimes a problem for the users).
    I also have made the experience that it is quite the same effort and more convenient if you design a complete user-driven screen. Then you have full control of that issue. I always use a small dialog box with a textEdit-Control where the users have to enter their rejection reason.
    I then create my own ZWFNOTE-Object and append this to the ADHOCOBJECT. This usually works very fine.
    with kind regards,
       Florin

  • Text Anchor Links

    Hello,
    We are working on a project that uses Text Anchor Links.
    We need the links, that are in the same document, to open in a new window. (For example: A link on page 4 that points to page 76 needs to open a new window showing both page 4 in the original window and 76 in a new).
    The only way we can get this to work is by having the links in separate PDF documents, but would like to have one file instead of a resource folder.
    Anyone know of a way to do this?
    TIA
    LM

    I have exactly the same problem with the url's in the body of my Verizon webmail emails too! The problem started a couple of weeks ago. The url's are not highlighted at all. I too have to copy them and them paste them into a browser. It appears to be a problem with the Verizon webmail application, since it doesnt matter which computer I access webmail from.

  • Linking Word Docs in RH8 - Need Workflow Critique, Best Practices Tips, etc.

    Me: TCS 2
    Writer 2: Word 97, Acrobat Pro 8
    Software industry
    Help File Specs: Using RH8 to output to AIR Help (prior to current project = CHM), approx. 500 topic legacy help system (apparently created several years ago from the Word U.G; no CSH, index, or glossary); project uses one master page and one CSS
    Project Challenges: Big new features being added at the 9th hour, deadline moved UP by two months, have just been given a writer to help document new features but she only has Word and Acrobat (and we both work from our home offices)
    After reading everything in the RH Help on Linking Word docs, Peter's info (RH8 Tour on Grainge.org), the related posts I found here, and watching RJ's demo on Linking vs. Importing, I've come up with a tentative workflow. Going to do some tests, but wanted to get this posted in the meantime.
    Workflow
    1. Generate separate Word file for each of the existing RH topics Writer 2 will need to update.
    2. Apply template to Word files that matches my CSS styles (?)
    3. Create Word template matching my CSS styles for Writer 2 to use for new topics.
    4. Writer 2 updates/creates content. Each Word file =One RH Topic.
    5. I delete the existing topics she now "owns" from the project.
    6. When she's done with her first pass, I link all of these into the project.
    7. When she supplies revised files, I drop them into the folder, then do "Update" (or "Force Update"?)
    8. She also supplies a commented PDF version of each file to me to say "XYZ.jpg goes here" or "Make sure to include this topic in the TOC". (From what I've read, images from Word to RH = headache, and I don't enjoy files names such as "Image0001"...already a big pain since this project originated in Word and my client is in love with screen captures...trying to "wean" them off.)
    Questions/Comments
    - I know you can bring TOC entries over from Word, but think I'll spend more time messing with trying to integrate into the "master" TOC than just manually doing it.
    - Can I just have Writer 2 use the Word Comments feature to pass info on to me, or would those show up in my output or cause some other issue?
    - Can Writer 2 use Word cross-references that would become hyperlinks to the correct topics in RH given above (or would all of her "topics" have to be in one Word file to do this)? Any way she can "code" text to end up creating a link to one of my topics, or am I going to have to do this?
    - Would I be better off generating one big Word file for her to edit, then telling RH to break it at a certain heading style instead of the 1-to-1 ratio I had in mind?

    Hi there
    In my own opinion, Panning is a nice attempt, but just doesn't cut the mustard. It's nowhere near as good as the panning one sees with Camtasia Studio.
    I might suggest combining Camtasia with Captivate for the ultimate development set. There are aspects Captivate shines in when compared with Camtasia, and there are aspects Camtasia shines in when compared with Captivate. So I say if you can afford it, go for it!
    Now I know that both packages are sort of pricey and not everyone can afford both. In that case you might want to try Jing, which is free to use. I've not looked very deeply at it, but it may offer some of what Camtasia does. You could then use that for your panning and enhance Captivate that way.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

Maybe you are looking for