Auto-generated executable jar not working properly

Hi all,
I have a desktop application. that I can run it from Netbeans with all its functionalities but when I click the generated jar file the application run wel but some of its functionalities was not working.
Any idea ...
Thank you in advance

Yousef_Aqarbeh wrote:
I have a desktop application. that I can run it from Netbeans with all its functionalities but when I click the generated jar file the application run wel but some of its functionalities was not working.Possibly you have not added your resources to the Jar file or are trying to get these resources as files, and files don't exist inside of Jars (AFAIK).
Any idea ...For more help, better help, and helpful help, create a [Short, Self Contained, Correct (Compilable), Example|http://sscce.org] or SSCCE. This is a small program that compiles, runs, demonstrates your problem, and contains no extraneous code. Please read the link, and have a go at it. Best of luck.

Similar Messages

Variable contents inside "EXECUTE IMMEDIATE" not working properly.

Hello,
I have the following package:
CREATE OR REPLACE PACKAGE "BACKUP"."PKG_BACKUP"
IS
PROCEDURE BACKUP_TABLE (TABLE_NAME IN VARCHAR);
END PKG_BACKUP;
CREATE OR REPLACE PACKAGE BODY "BACKUP"."PKG_BACKUP"
IS
PROCEDURE BACKUP_TABLE (TABLE_NAME IN VARCHAR) IS
MYDATE VARCHAR(10);
BEGIN
MYDATE := to_char(sysdate,'YYYYMMDD');
DBMS_OUTPUT.PUT_LINE(' Backing up '||TABLE_NAME||' table...');
EXECUTE IMMEDIATE 'CREATE TABLE "BACKUP"."'||TABLE_NAME||'_'||MYDATE||'" AS SELECT * FROM "MYSCHEMA"."'||TABLE_NAME||'" COMPRESSED';
END backup_table;
END "PKG_BACKUP";
/However, every time I execute it I get the following error:
SQL> exec BACKUP.PKG_BACKUP.BACKUP_TABLE('POOL');
** Backing up POOL table...*
BEGIN BACKUP.PKG_BACKUP.BACKUP_TABLE('POOL'); END;
ERROR at line 1:
ORA-00942: table or view does not exist
*ORA-06512: at "BACKUP.PKG_BACKUP
", line 9*
*ORA-06512: at line 1*
Table does exist and user executing the statement has the proper privileges (i've even executed the contents of "execute immediate" by hand and it works fine)
What am I missing?
Thanks in advance.

SQL> CREATE OR REPLACE PACKAGE pkg_backup AUTHID CURRENT_USER
2 IS
3     PROCEDURE backup_table (table_name IN VARCHAR);
4 END pkg_backup;
5 /
Package created.
SQL> CREATE OR REPLACE PACKAGE BODY PKG_BACKUP
2 IS
3     PROCEDURE backup_table (table_name IN VARCHAR)
4     IS
5        mydate   VARCHAR (10);
6     BEGIN
7        mydate := TO_CHAR (SYSDATE, 'YYYYMMDD');
8        DBMS_OUTPUT.put_line (' Backing up ' || table_name || ' table...');
9
10        EXECUTE IMMEDIATE 'CREATE TABLE BACKUP'||table_name||'_'||mydate||' AS SELECT * FROM '|| table_name || ' COMPRESSED';
11     END backup_table;
12 END PKG_BACKUP;
13 /
Package body created.
SQL> EXEC PKG_BACKUP.backup_table('EMP');
Backing up EMP table...
PL/SQL procedure successfully completed.
SQL> SELECT * FROM BACKUPEMP_20090130;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-80        800                    20
      7499 ALLEN      SALESMAN        7698 20-FEB-81       1600        300         30
      7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
      7566 JONES      MANAGER         7839 02-APR-81       2975                    20
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2850                    30
      7782 CLARK      MANAGER         7839 09-JUN-81       2450                    10
      7788 SCOTT      ANALYST         7566 09-DEC-82       3000                    20
      7839 KING       PRESIDENT            17-NOV-81       5000                    10
      7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30
      7876 ADAMS      CLERK           7788 12-JAN-83       1100                    20
      7900 JAMES      CLERK           7698 03-DEC-81        950                    30
      7902 FORD       ANALYST         7566 03-DEC-81       3000                    20
      7934 MILLER     CLERK           7782 23-JAN-82       1300                    10
14 rows selected.Edited by: user10594152 on Jan 30, 2009 5:18 PM
Edited by: user10594152 on Jan 30, 2009 5:19 PM

Auto Po creation is not working properly

Hello Gurus
I am trying to create PO automatically by making GR.
Material has Auto PO flag on
Vendor has Auto PO flag on
Plant is asigned to Standard POrg
Standard Info record is avaliable for Vendor,MAterial, Plant and Standard Porg
When i give all the detials in MIGO it is showing the error Vendor field is mandatory even after giving Vendor detials in Partnet tab.
Error is M7018.
I checked in SE91 if the Message Class M7018 is having problem .. it says there is no message class set up.
I am using 4.7 .. did i miss something in settings please help me
Regards
Sameer

Hello Sameer,
Make sure that you have followed the customizing steps detailed in the SAP Note 324517:
In Customizing "MIGO: Field Selection per Movement Type" enter field name LIFNR for movement types 101 and 161. The corresponding path is:
Materials Management
      > Inventory Management and Physical Inventory
        > Settings for Enjoy Transactions
          > Settings for Goods Movements (MIGO)
            > Field Selection per Mvt Type"
see here wether the entries:
   101 - LIFNR
   161 - LIFNR
have been created.
If not, please, create these two new entries and set both of them to 'Optional', then, re-test the system behaviour following the steps:
.- MIGO: Choose business transaction 'Goods Receipt' - 'Purchase Order' and movement type 101. Leave the field for the Purchase Order empty.
.- Click on 'non-ordered item' icon.
.- Enter all data in the item detail subscreen (material, quantity, plant, storage location - if needed - and vendor).
.- Check and post.
I hope this helps!
Esther

[svn] 1967: * Fixed issue where -keep-generated-actionscript would not work

Revision: 1967
Author: [email protected]
Date: 2008-06-05 08:12:21 -0700 (Thu, 05 Jun 2008)
Log Message:
* Fixed issue where -keep-generated-actionscript would not work
properly when -generate-abstract-syntax-tree was enabled, which is
now the default.
tests Passed: checkintests
Needs QA: YES
Needs DOC: NO
API Change: NO
Reviewer: clucier
Code-level description of changes:
CompilerConfiguration.java
Modified setKeepGeneratedActionScript() to force AST generation
off when the value is true.
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/CompilerConfiguration.java

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Auto-Brightness on iPad mini Retina is not working properly.

Hello! Noticed that the Auto-Brightness on iPad mini Retina is not working properly.
It works correctly only when such a dark place, then unlock the iPad brightness will be at a minimum. Likewise, if unlock iPad in a room with light, the brightness will adjust to the surrounding space.
If I turn light into a dark room, the brightness slider does not move, and stands on the site. Checked on the iPhone 5S, there problems are not present. Auto Brightness is working correctly.
P.S. Sorry for my bad english!

Godly19 wrote:
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

My auto-lock does not work properly in this new iOS 6

My auto-lock does not work properly in this new iOS 6

Do you have your Assistive Touch on? Per another user in another forum:
Source: http://forums.imore.com/ios-6-forum/240631-auto-lock-not-working-ios-6-a.html. Username: Chambaka
Okay, I did a 'reset all settings' in settings and problems fixed. Hope this can be useful for others.
Edit: it appears that when the assistive touch is on the autolock function won't work while in the home screen, but will work if opening a app. I hope Apple fixes this bug in the next update.
I tried what he said and my auto-lock's working again - so, I turned off my Assistive Touch. Hope Apple fixes this bug soon,

FireFox auto updated to 6.0 this weekend and has not worked properly since. I have uninstalled and reinstalled. Made sure all windows componets were up to date and still no joy. Any idea? Windows 7, 64 bit, normal configfuration. It is extreamly slow.

FireFox auto updated to 6.0 this weekend and has not worked properly since. I have uninstalled and reinstalled. Made sure all windows componets were up to date and still no joy. Any idea? Windows 7, 64 bit, normal configfuration. It is extreamly slow and never finishes loading ANY page.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

RFC adapter in XI 3.0 not working properly with BAPI in R/3 4.6C

Here is the scenario.
An XML file is received from our customer. This file contains purchase order information that is used to create a sales order in our SAP 4.6C system. Once the sales order is created an acknowledgement is generated and this is returned back to our customer in an XML format. This scenario is working perfectly fine in our XI 2.0 system but is not working properly in our XI 3.0 test environment. Our custom function module in R/3 is a wrapper function that uses a standard SAP BAPI to create the sales order. Part of the function module does use the statement
call function 'BAPI_TRANSACTION_COMMIT'
The last thing the BAPI does is call another function module that using an RFC destination that will return and order acknowledgement.
Here is what happens within XI and our SAP system.
The XML file is received and mapped to our imported RFC. The RFC adapter is called and the information is passed onto SAP where our customer function module executed. The sales order is created within SAP without any problems and the second function module is called which references an RFC destination assigned to our XI 3.0 system. The information is sent back to XI and an appropriate file is created for our customer. All seems to be working properly except that when the original RFC is sent from XI to SAP, SAP creates a short dump stating
"call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException:" Then it is put back into the que where 5 minutes later it executes again and trys to recreate the sales order in SAP. (again, this same function module executing from XI 2.0 works fine)
I believe I have everything configured properly because the SAP side is being executed and I am successfully passing information back from SAP to XI. However the original function module in SAP is failing with the above error message. It appears that the original function module cannot communicate back with XI. I have had SAP looking at this issue and they have not been successful yet in solving this problem.
Any ideas.
Thanks,
Jim d'Hulst

Hi,
I think the problem is with the send back of acknowledgement to XI. Does the DeliveryException state something about the sender agreement? I guess you are using a statement like below:
CALL FUNCTION 'ZABCD'
destination <tcp/ip destination>
exporting
input = ack.
In that case, check whether the TCP/IP destination is working fine. Also, to be able to exchange message, the structure of the Function Module ZABCD needs to be identified as the sender in XI Configuration (Integration Directory).
Also, check your config with the blog mentioned below:
<a href="/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit">/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit</a>
Regards,
Amitabha

Remote not working properly with Apple TV...sporadic fuctioning

Hello,
I have no idea what caused this to happen, but both my remotes (I have one from my MacBook Pro and one from my AppleTV) seem to not work properly with AppleTV. It sometimes works but it is extremely frustrating as it only registers about 1 out of every 10-20 clicks then continues to remember the previous clicks therefore making it essentially impossible to select the desired menu/item. Basically it just seems like it's out of control!
I tested whether it was the remote or AppleTV that was causing the problem by running Front Row on my MacBook Pro and both remotes seem to navigate Front Row perfectly fine. They both act the same way with AppleTV, whether they are paired or not. It seems as though something happened with my AppleTV. This problem occurred randomly, with no specific cause I can think of.
Please let me know if any of you have ever experienced this problem and what your solution was, if any!
I have tried restoring to factory conditions, resetting settings, ran diagnostics, unplugged and replugged it, and nothing seems to be working!
Oh, and I just replaced the battery on one and have tried swapping batteries, etc.
HELP PLEASE!
Thank you,
Travis

The menus have never been as responsive as they used to since the 2.0 update in my opinion - basically AppleTV seems to cache/buffer remote click if it is busy or perhaps waiting for something to stream from itunes, and when resources become available it suddenly executes all command rapidly which makes it behave wildly in menus.
Usually happens I find after restarting the unit or if streaming drives have gone in to power saving modes and there's a delay while they wake up to feed the AppleTV.

Why is my executable VI not working with a PCI-6259?

I have bought a PCI-6259 which has referencing trigger capability. I wrote a VI for acquiring the data and tested the VI on my PC that has the full developmental LabView 8.2.1 package installed. The trigger is a 1 volt level that is triggered by a potentiometer ranging from 0-5 volts that I control manually. The VI works exactly how I want it to, however, now I want to use the Application Builder to create an executable to distribute the VI to the testing station PC. I then removed the PCI-6259 from the developmental PC and installed it in the testing station PC and loaded the executable VI along with the LabView 8.2.1 Run Time Engine. I open the program and it runs but I cannot get the program to trigger using the same potentiometer so it runs in an infinite loop. I'm pretty sure everything is loaded correctly and the only difference between the two stations is that one has the full developmental LabView package and the other is an executable. Would anyone know why my executable is not working?
Thanks,
Matt Kostyal

Hey Matt,
Thanks for contacting National Instruments support. One thing I'd like to see you try in the DAQ diagnostic utility. I do not suspect a bad card, but it is an executable that we can try that we know was properly built. If it doesn't work that will give us some more insight into the problem if it is truly hardware or software.
Let me know what you find.
Regards,
Kenn North
Senior Product Manager - Search, Product Data
http://ni.com/search

CTSS is not working properly in RAC 11.2.0.1 on vmware 1 (redhat 5.3)

Dears
I have installed CRS 11.2.0.1 on vmware 1 at redhat 5.3 .
CRS has installed sucessfully without any error. but when execute
[oracle@RAC1 grid]$ ./runcluvfy.sh stage -post crsinst -n RAC1,RAC2 -verbose
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name                             Status
RAC2                                  passed
RAC1                                  passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name                             State
RAC2                                  Active
RAC1                                  Active
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Reference Time Offset Limit: 1000.0 msecs
Check: Reference Time Offset
Node Name     Time Offset               Status
RAC2          -4700.0                   failed
RAC1          0.0                       passed
Result: PRVF-9661 : Time offset is NOT within the specified limits on the following nodes:
"[RAC2]"
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@RAC1 grid]$ After That I checked on RAC1
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
and on RAC2
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -4700
[oracle@RAC2 ~]$ But when some time ago i checked it was
oracle@RAC1 ~]$
[oracle@RAC1 ~]$ cluvfy comp clocksync -n all
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
CTSS resource check passed
Querying CTSS for time offset on all nodes...
Query of CTSS for time offset passed
Check CTSS state started...
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Check of clock time offsets passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
and on RAC2 is was
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -1000
[oracle@RAC2 ~]$ So, I am seeing that in RAC2, CTSS is not working properly . I don't know why it's time Offset is increasing ?
Thanks&Regards
Muhammad Abdul Halim
http://halimdba.blogspot.com

Dears
I have installed CRS 11.2.0.1 on vmware 1 at redhat 5.3 .
CRS has installed sucessfully without any error. but when execute
[oracle@RAC1 grid]$ ./runcluvfy.sh stage -post crsinst -n RAC1,RAC2 -verbose
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name                             Status
RAC2                                  passed
RAC1                                  passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name                             State
RAC2                                  Active
RAC1                                  Active
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Reference Time Offset Limit: 1000.0 msecs
Check: Reference Time Offset
Node Name     Time Offset               Status
RAC2          -4700.0                   failed
RAC1          0.0                       passed
Result: PRVF-9661 : Time offset is NOT within the specified limits on the following nodes:
"[RAC2]"
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@RAC1 grid]$ After That I checked on RAC1
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
and on RAC2
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -4700
[oracle@RAC2 ~]$ But when some time ago i checked it was
oracle@RAC1 ~]$
[oracle@RAC1 ~]$ cluvfy comp clocksync -n all
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
CTSS resource check passed
Querying CTSS for time offset on all nodes...
Query of CTSS for time offset passed
Check CTSS state started...
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Check of clock time offsets passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
and on RAC2 is was
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -1000
[oracle@RAC2 ~]$ So, I am seeing that in RAC2, CTSS is not working properly . I don't know why it's time Offset is increasing ?
Thanks&Regards
Muhammad Abdul Halim
http://halimdba.blogspot.com

My Macbook is not working properly, I went to a Genius Bar appointment, they were not helpful at all and just told me to go off and reboot my Mac and then restore via TimeMachine. I dont know how to do this. I am extremely displeased with Apple, help me?

My late 2011 Macbook Pro is not working properly it is very slow and extremely painful to use, I went to a Genius Bar appointment, they were not helpful at all and just told me to go off and reboot my Mac and then restore via TimeMachine. I dont know how to do this. I am extremely displeased with Apple at the moment, can someone please help me?

Your problem description is generalized and non-specific. I would make another appointment at the Apple store and insist they help you execute their suggested fixes.
Incidentally, if you search this site, Apple has excellent articles re: restoring a system.
Barry

Old Netscape console 4.2 not working properly with new Directory Server 5.2

After successfully installing Messaging Server 5.2 and applying patch 2, the old Netscape Console doesn't work properly, I tried running the script which is given in the link
http://docs.sun.com/source/816-6734-10/index.html
which hobbles the server by creating a set of dummy jar files in order for the directory server console not making any changes on the messaging server. At first I got these messages:
Failed to install a local copy of msgadmin52.jar or one of its supporting files: not a ZIP file (END header not found)
I got the same message for these 2 files:
admserv42.jar
msgadmin52.jar
After that I made real dummy jar files using a zero-length file I created with touch and I got these messages:
class com.netscape.management.admser.AdminServer not found
After that I erased all the files created by the script and I get these messages:
failed to install a copy of admserv51.jar or one of its supporting files: null
failed to install a copy of msgadmin.jar or one of its supporting files: msgadmin52.jar not found at http://192.168.10.205:5001/
and for admserv42.jar I get the same message
Does anyone have a clue on what to do next??
thanks in advance
Eduardo

The thing is that the netscape console 4.5 won't work properly with messaging server 5.2, and the directory server console is not working properly for the directory server. I already know the limitations about these consoles since it is explained in the doc where the procedure of migrating from a 4.x directory server to 5.1. I

ESS is not working properly after upgrade from 4.7 to ECC6.0

ESS Scenario in 4.7
4.7 Scenario:
The IMG configuration u201CWork and Life Eventsu201D is done to map them with the PZM3 service (Home Page) to get them as different folders/links on the home page as given below:
List of Services used to set up ESS:
Sl.No     Functionality     Service/EWT/URL Name     Standard/ Customized     Type
1     Home Page     PZM3                                          Standard                 Service
2     Inbox                     BWSP                                          Standard                 Service
3     Calendar                     BWCA                                          Standard                 Service
4     Whou2019s Who     PZ01                                          Standard                 Service
5     CPF Display     http://192.168.0.2:7070/omcpf             NA                                  URL
6     Payslip Display     ZPAYSLIP_USER                          Customized                Service
7     Section 80C     PZ88                                          Standard                EWT
8     Section 80                     PZ80                                          Standard                EWT
9     Form 16                     HRESSIN_F16                          Standard                EWT
10     Address                     PZ02                                             Standard                EWT
11     Bank Information     PZ03                                          Standard                Service
12     Open Appraisals     Not Available                           NA                                 Service
13     Emergency Address     PZ05                                           Standard                 EWT
14     Family/Dependents     PZ12                                           Standard                 EWT
15     Personal Data     PZ13                                               Standard                  EWT
16     Previous Employers     PZ28                                           Standard                 EWT
17     Apply Leave     WS20000081                           Standard               Service
18     Leave Overview     WS01000109                           Standard              Service
19     Leave Balance     PZ09                                             Standard              Service
20     Loan Application     ZLOAN                                          Customized              Service
ECC6.0 Scenario:
In ECC6.0, flow based services are no more supported by ECC6.0 and Dynpro based services are supported.PZM3 (Home Page) is a flow based service.
There is no replacement provided for PZM3 service, so the IMG configuration is not possible for u201CWork and Life Eventsu201D.
OSS ticket raised, but no solution for IMG u201CWork and Lifeu201D events.
List of Services would be used to set up ESS:
Sl.No     Functionality     Service/EWT/URL Name     Standard/ Customized    Type
1     Home Page     PZM3                                       Standard                           service
1)this service is not available
2)SAP does not provide any replacement.
3)PZM3 is not supported in Integrated ITS. No direct solution proposed.
4)Given reference of few notes.
5) A dynpro (module pool screen) based IAC needs to be created and links need to be provided on that screen. Generated HTML page is modified to access the services via URL or by OKCODE.
Screenshot attached below.
2           Whou2019s Who                 PZ01                                      Standard                             Service
1)this service Available
2)Not Working properly.
3) The problem may be because of the dependency with SAP Query. Either Query is missing in the new system or not having the proper authorization. Needs to be debugged and finalized.
7     Section 80C     PZ88      Standard     EWT     Available
8     Section 80      PZ80     Standard     EWT     Available
9     Form 16                HRESSIN_F16     Standard     EWT     Available
10     Address                PZ02     Standard     EWT     Available     Only EWT Available.          Service needs to be created to access the EWT.
11     Bank Information     PZ03     Standard     Service     Available     EWT Available.           Service needs to be created to access the EWT.
12     Open Appraisals     Not Available     NA     Service          EWT Available.           Service needs to be created to access the EWT.
13     Emergency Address     PZ05     Standard     EWT     Available     EWT Available.           Service needs to be created to access the EWT.
14     Family/Dependents     PZ12     Standard     EWT          EWT Available.           Service needs to be created to access the EWT.
15     Personal Data     PZ13     Standard     EWT          EWT Available.           Service needs to be created to access the EWT.
16     Previous Employers     PZ28     Standard     EWT          Service Available
17     Apply Leave     WS20000081     Standard     Service     Available, but not working                                                                               No solution is proposed yet.
18     Leave Overview     WS01000109     Standard     Service     Available, but not working               No solution is proposed yet.
19     Leave Balance     PZ09     Standard     Service     Available, but not working               No solution is proposed yet.

Ya ramakrishna,
Even easier is for you to send us the mail ID of your client. We will do the work, then send them an idoc of message type INVOICE and for you a post card of course.
Please do the needfull,
Julius

Undo,redo not working properly with JPopupMenu

if i use JButton for undo ,redo it is working fine. but the same code is not
working properly if i add it in JPopupMenu.
what could be the problem.
thanks

what could be the problem.Your code is different or written incorrectly and since you didn't post any we can't help.
[url http://java.sun.com/docs/books/tutorial/uiswing/misc/action.html]How to Use Actions
If you need further help then you need to create a [url http://homepage1.nifty.com/algafield/sscce.html]Short, Self Contained, Compilable and Executable, Example Program that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
And don't forget to use the [url http://forum.java.sun.com/help.jspa?sec=formatting]Code Formatting Tags so the code retains its original formatting.

Auto-generated executable jar not working properly

Similar Messages

Maybe you are looking for