Using visual studio entity frameworks in crystal reports
Can visual studio entity frameworks be used in designing crystal reports?
Can visual studio entity frameworks be used in designing crystal reports?
Similar Messages
-
Visual Studio 2005/2008 and Crystal Reports versions/upgrade questions.
I've tried posting this question on the MSDN forums and gotten no response.
I've downloaded and installed VS 2008 Beta 2. The versions on the Crystal Reports files included are 10.5.0.1806
I'm currently using VS 2005, with the included Crystal Reports. The versions on those files are 10.2.0.xxxx. I've created an desktop app (in VB) which stores it's data in a database and uses the CR 10 runtime merge modules to generate a report.
I was considering upgrading the Crystal Reports version to XI. I would like to allow customers to modify my delivered report with their own licensed copy of CR XI. I am not providing any functionality within my app to create or modify the delivered .rpt or use it outside my application.
Questions:
Do I need to update the runtime files to CR XI to support rpt files modified with CR XI? Current runtime files are being delivered with the CR 10 merge module.
I see a Crystal Reports for Visual Studio upgrade to CR XI.
Can I update the merge modules to CR XI and still use the CR for VS2005 for development?
Does it make any sense to update CR for VS 2005? Or to get the full CR XI Developer edition? My usage of CR functionality is very limited.
Would there be any benefit to waiting for the release of VS 2008? How does that change the scenario?
How does Crystal Reports for Visual Studio fit in with the Crystal Reports Lifecycle? It's not mentioned on Business Objects End of Life Dates page . Crystal 10 has a Patch EOL of 31-Dec-07. Does this apply to CR for VS 2005? Where does 10.5 fit in?
My main concern is allowing customers with CR XI to change the format of my delivered .rpt to run with my app. Adding their company name, logo, etc. My testing show a CR XI report still works with my current app. But, going forward, what should I deliver and what do I need to use to continue development?To use Reports designed in XI, you need to use XI or higher runtime, running them in older versions may work, but you may encounter unforeseen issues doing so.
If you are to use VS2005 for development you need to use XI Release 2 (11.5) runtime.
If you are going to use VS2008 for development you need to use Crystal Reports 2008 with Service Pack 0.
The support end of life for versions of Crystal Reports bundled with Visual Studio are linked to what Microsoft's lifecycle for the product is. Generally if there is a workaround for the issue that is simple enough, there will not be a patch created.
The changes you are expecting the customer to do can be accomplished with our RAS SDK which is available without using enterprise starting with Crystal Reports XIR2 SP2. -
Deploying visual studio 2008 project with crystal reports
I have deployed an application using ClickOnce. The application works except that I am getting a "Load Report failed" error. I am able to view reports on my developer machine, but when I deploy it I get the error.
What causes this and how can I fix it?Cause is that either the report file is not found where the engine expects it to be, or the engine does not have the neccessary permissions to load and / or process the report. A bit more information is needed:
1) What version of CR are you using?
9.2.2.634
2) What is the OS you are deploying to?
XP
3) Is this a web or a windows app?
Windows
4) How are the reports being loaded? (code snippet may be a good idea)
THIS IS IN FORM frmCRReports
<snip>
Private Sub SetReport()
Dim strReportPath As String = Application.StartupPath
If rbDetails.Checked = True Then
ReportName = strReportPath & "\Reports\rptDetail.rpt"
ElseIf rbByYear.Checked = True Then
ReportName = strReportPath & "\Reports\rptYearly.rpt"
End Sub
<snip>
Private Sub cmdPreview_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdPreview.Click
Call SetReport()
frmCRViewer.Show()
End Sub
THIS IS IN FORM frmCRViewer:
<snip>
Private Sub ViewReport(ByVal ReportName As String)
Dim oReport As New ReportDocument
oReport.Load(ReportName)
CrystalReportViewer1.ReportSource = oReport
End Sub
Private Sub frmCRViewer_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Call ViewReport(ReportName)
End Sub
The reports are located in a folder named Reports which is directly under the Application Files folder; both underneath the folder having the application name on the application server. Any help will be appreciated! -
I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks.Hi,
I have a question. This application retrieves SSRS reports from the report sever. When I download the reports
from the SQL Server I can open them in visual studio 2008 but they don't open in visual studio 2010. I can access the application files on visual studio 2010 and team foundation server 2010. I was unable to open team foundation server 2008 on visual studio
2008. The issue is that I am unable to add a report with a new name to the application. I use visual studio 2008 to deploy the reports on the report server but it has to be the same name to be able to run the report from the application. I can deploy any report
on the report server but I can't access it from the application unless it has to be the same name as the present reports. If I keep the report the same name then it will replace the old report and the new report will run from the application. But only if it's
the same name. I guess when I add a new report to the application with a new name I am supposed to add a definition in the application C sharp files on visual studio 2010 so that the new report will show in the application. What's your opinion
? I have attached 2 images of the application and team foundation server 2010 and the report server.
Thanks. -
Crystal Reports using Visual Studio
I am becoming more comfortable with working with Crystal Reports using Visual Studio. I ran into some issues, but I was able to figure them out. I have ran into one which I am not able to figure out. I would like for you to ask Business Objects if they can assist me on this one. When the reports are displayed, a group tree is displayed to the left of the report making it possible for users to navigate through the reports. As you continue to click down through a branch, eventually you are not able to see what to click on or to click on the next link. What could be done to fix this issue?
Hi,
Have you checked the crystal report in designer mode? If not, try doing it.
Further, you can provide following:
1)Windows or Web Application?
2) Version of Crystal Reports?
3) Version of Visual Studio?
4) OS (32 bit or 64 bit)?
Thanks,
Saurabh -
Runtime Distribution for Crystal reports for Visual Studio 2010 framework 4
Hi,
Where can I find the msi for installing runtime distribution for asp.net web application that was created using visual studio 2010?
Thanks.
Rosa.MSM
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_mergemodules_13_0.zip
MSI 32 bit
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0.zip
MSI 64 bit
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_64bit_13_0.zip
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
How open a report with Viewer 2008 without using Visual Studio and Java
Hi,
There is a way to open a report (with parameters) save in a web server with Crystal Report Viewer 2008 without using Visual Studio or Java ?
I've an asp page and i want to open this report using some command (I know asp, vbscript and html)
In the past it was very easy because we use CR 9, but now it's already many days im looking for a solution but seem impossible.
I know the craxdrt.dll is not included with Crystal Reports 2008.
It seem me i can use OpenDocument, but i'm not sure. Someone has some easy example to help me ?
Remember i have only Crystal report viewer 2008 on the server and on the clients.
Thanks in advanceIf you are looking to create a web application or view report through a web server using only Crystal Reports then you do have to either use Java, or .NET.
If you have Crystal Reports server or Business Objects Enterprise you can use OpenDocument to view managed reports but this does require one of our server products.
Trevor. -
Error on Visual Basic 6.0 and Crystal Reports 9.2 on XP SO
We need support to resolve an error on a system made with Visual Basic 6.x and Crystal Reports 9.2.
Error '-2147417848 (80010108)'
Automation Error
Not always give these errors.
Often occurs after request two reports followed and SO is XP
When SO is Windows 2000 professional this error not occurs.
These are versions of the products used:
Versión Visual Basic: 6.0.9782
Versión Cristal Reports: 9.2.0.448Hello,
This forum is for community use and is not considered a support site. For assistance you need to purchase a case from our support site. But 9 is no longer a supported version so this is your only place to get assistance.
Try downloading the only patches available from:
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90actxwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90dbexwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90devwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90mainwin_en.zip
Thank you
Don -
Question about creating association between Sharepoint BDC entities using Visual Studio 2010
I am following this tutorial:
http://blogs.msdn.com/b/vssharepointtoolsblog/archive/2010/08/02/walkthrough-of-creating-association-between-sharepoint-bdc-entities-using-visual-studio-2010.aspx
I am getting the following error:
There is an error in the TypeDescriptors of Parameters on Method with Name 'CustomerToOrder' on Entity (External Content Type) with Name 'Customer' in Namespace 'BdcAssociationSample.BdcModel1'. The TypeDescriptors incompletely define where the Foreign
Identifiers of Entity 'Order' in Namespace 'BdcAssociationSample.BdcModel1' are to be read. That Entity expects exactly '1' Identifiers, but only '0' TypeDescriptors with the correct Association were found from which to read them.
I have viewed the following:
http://lightningtools.com/business_connectivity_services/the-typedescriptors-incompletely-define-where-the-identifiers-of-entity-x-are-to-be-readbcs-error/
after reading that article, I am still not sure what setting I am missing. Does anyone have the full working source code from the msdn article linked above?Hi,
According to your post, my understanding is that you got the symbols not loaded error.
First try rebuilding your project by right mouse click the project > Rebuild If that doesn't work, try a clean of the project (right mouse click on the project > clean)
If that didn't work check this:
Right mouse click your project
select [Properties]
select the [Build] tab
make sure [Define DEBUG constant] and [Define TRACE constant] are checked
Click the [Advanced] button at the bottom of the Build tabpage
Make sure that [Debug Info:] is set to [full]
Click [OK] and rebuild the project ;
Hope that works for you! (step 6 generates the .pdb files, these are the debugging symbols)
What’s more, you can clean & re-compile the code, then install the respective dlls one more time to GAC (just remove them before adding to GAC again), do an IISReset to check whether it works.
More reference:
http://stackoverflow.com/questions/2155930/fixing-the-breakpoint-will-not-currently-be-hit-no-symbols-have-been-loaded-fo
http://stackoverflow.com/questions/2301216/the-breakpoint-will-not-currently-be-hit-no-symbols-have-been-loaded-for-this-d
http://geekswithblogs.net/dbutscher/archive/2007/06/26/113472.aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
Adding Columns to the matrix in SAP B1 user form using Visual studio 2010
Hi,
Using Visual studio 2010, I have created a SAP B1 user form( b1f ) with one matrix.Matrix is having 5 columns. Its working properly. Later, I want to add few more columns. Then I added columns to the matrix as I have created columns initially. But, it does not saves.
i.e, Whenever I run, In B1 I could see only old columns. Newly created columns are not showing.So, I closed the .net project and opened again. Created columns are not showing in visual studio b1f itself. So, I created again and saved. But, its not saving.I tried it many times.
What I am missing?
Any help is appreciated.
Thanks in advance,
Parvatha Solai.NHi Parvatha,
Are you using B1 Studio? Anyway try to clean the solution first then rebuild it. This would re-copy files to the output directory, that contain your changes.
Best regards,
Pedro Magueija -
How to get string value from database table using Visual Studio 2005?
Hi,
Im developing plugin in illustrator cs3 using visual studio 2005. I need to get the values eneterd in database. Im able to get the integer values. But while getting string values it is returning empty value.
Im using the below code to get the values from database table
bool Table::Get(char* FieldName,int& FieldValue)
try
_variant_t vtValue;
vtValue = m_Rec->Fields->GetItem(FieldName)->GetValue();
FieldValue=vtValue.intVal;
CATCHERRGET
sprintf(m_ErrStr,"Success");
return 1;
Im using the below code to get the values.
AIErr getProjects()
char buf[5000];
int i;
std::string catName;
::CoInitialize(NULL);
Database db;
Table tbl;
errno_t err;
err = fopen(&file,"c:\\DBResult.txt","w");
fprintf(file, "Before Connection Established\n");
//MessageBox(NULL,CnnStr,"Connection String",0);
if(!db.Open(g->username,g->password,CnnStr))
db.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
fprintf(file, "After Connection Established\n");
if(!db.Execute("select ProjectID,ProjectName from projectsample",tbl))
db.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
int ProjectID;
int UserID;
int ProjectTitle;
char ProjectName[ProjectNameSize];
if(!tbl.ISEOF())
tbl.MoveFirst();
ProjectArrCnt=0;
for(i=0;i<128;i++)
buf[i]='\0';
int j=0;
while(!tbl.ISEOF())
if(tbl.Get("ProjectID",ProjectID))
fprintf(file,"Project ID: %d ",ProjectID);
ProjectInfo[ProjectArrCnt].ProjectID = ProjectID;
sprintf(buf,"%d",ProjectID);
//MessageBox(NULL, buf,"f ID", 0);
j++;
else
tbl.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
break;
//if(tbl.Get("ProjectTitle",ProjectName))
if(tbl.Get("ProjectName",ProjectName))
MessageBox(NULL,"Inside","",0);
fprintf(file,"ProjectTitle: %s\n",ProjectName);
//catName=CategoryName;
ProjectInfo[ProjectArrCnt].ProjectName=ProjectName;
//sprintf(buf,"%s",ProjectName);
MessageBox(NULL,(LPCSTR)ProjectName,"",0);
else
tbl.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
break;
ProjectArrCnt++;
//MessageBox(NULL, "While", "WIN API Test",0);
tbl.MoveNext();
//MessageBox(NULL, ProjectInfo[i].ProjectName.c_str(),"f Name", 0);
::CoUninitialize();
//sprintf(buf,"%s",file);
//MessageBox(NULL,buf,"File",0);
fprintf(file, "Connection closed\n");
fclose(file);
for(i=0;i<ProjectArrCnt;i++)
sprintf(buf,"%i",ProjectInfo[i].ProjectID);
//MessageBox(NULL,buf,"Proj ID",0);
//MessageBox(NULL,ProjectInfo[i].ProjectName.c_str(),"Project Name",0);
return 0;
In the above code im geeting project D which is an integer value. But not able to get the project name.
Please some one guide me.As I said in the other thread, this really isn't the place to ask questions about a database API unrelated to the Illustrator SDK. You're far more like to find people familliar with your problem on a forum that is dedicated to answering those kinds of questions instead.
-
How to create a three state approval workflow in SharePoint 2013 using visual studio 2013
Hi Everyone,
i have a requirement like 3 state to approve. Here is the details:- when the item added into the list it will go for reviewer. Once the reviewer review the item, he will assign the task to concern person/department(Parallel process more than two persons).
Once they will approve the request again it will come back to reviewer and he will assign the task to team member(parallel process). Once the team member accepted then workflow terminate.
i want develop this workflow using visual studio 2013 only, not using designer..
Thanks in Advance.....
MalleshHello,
you can find multiple sample on the web like those
http://www.splessons.com/2013/12/create-state-machine-workflow-in-sharepoint-2013-using-visual-studio-2012/
http://msdn.microsoft.com/en-us/library/ee231606.aspx
I don't think that's very different using VS2013 or VS2012
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer? -
How to manage a connection with powershell using visual studio with C#
Hi
I want to manage a connection with powershell for a web app using visual studio with c#. and also run command with pipeline
Plz give a some suggestions..Hi Raj_Kumar_Saini,
To make things clear, could you please clarify these thing?
1. Do you mean you want to execute some PowerShell scripts from C# language? These blogposts may give you some ideas:
Executing PowerShell scripts from C#
Powershell Automation and Remoting (a c# love story)
Execute PowerShell from a ASP.NET Web Application
2. Is your question related to Visual Studio Integration? Do you want to build a Visual Studio Extension?
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Which is better to use Store Procedure or Views in Crystal Reports ?
Hi,
which one is more better to use Store Procedure or Views in Crystal Reports ?
Thanks.It depeneds on the requirement. Well, but from performance point of view as u know that stored procedures are already compiled on DB side, they would be more efficient. Views are handled differently. Here CR has nothing to do with it.
But if the stored procedure u r using is having 2 Select statements, CR will only display the results from the first select statement. In that case you need to use Views as one can use more than one views in the report and join them.
Using a Generic view which is created by the DBA for a larger audience will result in performance issues meaning if a View "V" has 25 fields and View is based on 5 tables and ur report is using only 5 fields which are coming only from 2 tables inside the view,in this case u will end up in joining 3 more tables unnecessarily.
Hope this helps! -
Project server online workflow using visual studio
hi sir,
I am working on project online 2013(office 365).I have create a workflow with sharepoint designer also.but i have need to create workfow in project online using visual studio.please suggest me.and deploy as it wsp file.
vijayHello,
you can start with SharePoint 2013 project and then add the Project server dlls. Then add the tabs to get the project server workflow history and tast list.
follow this blog
http://blogs.msdn.com/b/project_programmability/archive/2012/11/07/creating-project-workflows-using-visual-studio-2012.aspx
It will help you to get started. Hope it helps.
Please mark as answered if it helps.
Maybe you are looking for
-
How to reinstall my OS on macbook pro?
how to reinstall my OS on macbook pro? there is no DVD attached with my purchase, and if I just download one from APP store, I have to pay and the ilife 11 suite will not be incleded, what should i do?
-
Text Field Alphabet Soup crashes Safari 3.0.4 - How to fix?
Like many others, I have installed the 10.4.11 bundle update and am having problems with Safari. My problems occur when I try to type anything into a text field. If I type something that starts with the same characters I have used before, the field f
-
My hard drive crashed and I had to wipe my computer. When I plug my iPod into my computer, it asks if I want to sync my (empty) iTunes account to my (full) iPod, but doesn't give me the option to put my iPod music onto my empty iTunes account. All I
-
I Just synced my iPhone and lost all the info in notes I had on the phone. How do you have the info sync from phone to desktop and not the other way around as I usually make contact changes etc on my phone. I would then like to be able to sync that i
-
how do I get msm on my iPhone 3GS I can send but I can't reseve