Auto po creation after save sales order.

Hi, Experts,
A s per my business requirement, We have mapped configuratin for auto PR creation at a time of order if stock not available, But system not create automatic PO after save sales order. I want to crate Automatic PO after save sales order, it is possible i know , But for that which type for configuration require i don't know, can anybody give me solution for this issue.
Thankls a lot in advance,
Regards:
Happy

Hi,
It's possible to create PO automatically after sales order is saved.
1. Set up back-to-back, i.e. PR can be automatically created after the SO is saved.
2. Item category - make sure 'Create PO automatically' checkbox is ticked.
3. Enterprise Structure --> Sales Organization - ensure that PO type, purchasing group etc. is maintained.
4. Transaction code SWETYPV - Ensure that both checkboxes are ticked for BO (object category), BUS2032 (object type), ALECREATEE/CHANGED and ERRORCHANGINGPURORD/ERRORCREATINGPURORD.
5. Optional: You could execute BD86 to check for consistencies (note that you can still get it work even if BD86 shows errors)
Regards,
HweeLing

Similar Messages

PO Creation after CRM Sales Order Creation

I am creating a CRM Sales Order and the moment I save the CRM Sales Order,
it creates a PO in ECC. I need to find out how PO is getting triggered?
When I open the CRM Sales Order it shows a PO already created for this Sales Order.
Has anyone face this or same kind of scenerio ever? If yes please let me know how can fnd the triggering point of PO creation.
Thanks in advance!!
Sachin

Hi Mathivana,
I had faced these issue several time. As per SAP standard logic whenever you saved order in CRM it replicate immediatly in ERP till that time the order will be locked for any further change in CRM to save transaction data intigrity. The lock gets removed once the CSA queue(notification) from ERP update in CRM than unlocked.
You check the in SMW01 transaction and perform search with order number you will find Bdocs are in Intermediate stage(I can't tell reason as it can be so many reason why Bdocs get stuck) -Select and activate the Bdocs once again if you are lucky and it activated your order till be unlocked.
Or else user report most common for this issue "CRM_CHECK_DISTRIBUTION_STATUS" pass order number number and document type to unlock distribution than you will be able to change order.
100 % sure shot answer. Appriciate if points alloted
Thanks,
prem

How to block the creation of a Sales Orders without a linked Purchase Order

Hi. I'm trying to block the creation of a Sales Order that doesn't have a linked Purchase Order. The first thing I did is using the SBO Transaction Notification as follows:
IF @transaction_type = 'A' AND @object_type='17'
BEGIN
     IF (SELECT PoPrss FROM ORDR WHERE DocEntry = @list_of_cols_val_tab_del) = 'N'
     BEGIN
          SET @error = 1
          SET @error_message = 'Purchase Order Missing...'
     END
END
This works good. I create the Sales Order, I tick the purchase order field on the logistics tab, I click Add, and then the purchase order window appears...
Then, the problem begins... If I click the Cancel button, the purchase order is obviously not created, but the Sales Order is created.
Can someone tell me how to block the creation of the sales order If the user press the cancel button on the purchase order window (and the purchase order is not created)
As far as I can see, after clicking the add button in the sales order document, the Sales Order is created on the DB. If there's no way of blocking the creation of the Sales Order, can I avoid closing the purchase order window by the SBO_TransactionNotification? (if the purchase order has not been created)
Thanks...

Hi Yail,
I think you can't close the purchase order with the stored procedure.
Try to catch the Event when the user click on Cancel button.
So you can list the vents with event logger : https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ede3be37-0e01-0010-1883-cd1b5293473e
You can block the cancel button and force the user to create the purchase order.
Hope i help you
Best regards
Michael

Automatic Creation PO from Sales Order

Hi All,
I'd like to make automatic PO Creation check box (Sales Order - logistics tab) is checked by default (not blank). Do you have any idea how to do this? Currently I use SAP B1 2005B version.
Thanks and Regards

Use
Use following procedure to create a purchase order directly from a sales order.
Prerequisites
In the Sales Order window, choose the Logistics tab. Select the Purchase Orders option. This initiates an automatic creation of a purchase order as soon as the sales order is added to the system.
Procedure
       1.      Create a sales order and choose Add.
The Purchase Order Confirmation window appears. All items included in the sales order appear on the left side of the window; the purchase order is on the right.
       2.      Select the items you want to include in the purchase order by highlighting their rows.
       3.      To move the selected items to the opposite side of the window, click . To include all the items in the purchase order, click .
       4.      By default, the quantities for the selected items are the quantities from the sales order. If necessary, change the quantities for the purchase order.
       5.      To save the purchase order as draft, select Create Draft Doc..
       6.      If required, select Split PO.
By default, the purchase orders or drafts are created for the regular vendor of each item. The Purchase Order field allows you to place an item row under a different regular vendor:
○     Select the item row you want to place under a different regular vendor.
○     From Purchase Order, click and choose the regular vendor to which you want to assign the item row.
○     Place the item row under the selected regular vendor.
       7.      To create the document for a different vendor, highlight the relevant item and click   to choose a different vendor from the Purchase Order.
       8.      To create the purchase order or the purchase order draft, choose Add.

Blocking creation of particular sales order type

HI ,
I initially my sales order type was ZMF , so many sales order are open , as of now I want to block the creation one new sales order of type ZMF,
Please guide me

Hi Sunaina,
Simply go to the details of ur doc. type (i.e in Define Sales Doc. types in SPRO) & put "X" in the "Sales Document Block" field on the top right of the order type.
This will block d usage of this particlar doc type.
Hope it helps. Plz close the thread if answered.
regards

Need the userid & creation date of sales order.

Hi all,
I need to know the userid and creation date of sales order. Can any body please tell me..

check the fields ERNAM and ERDAT in the table VBAK.

Availability quantity after changing sales order -

Hi experts,
where is the settings for availability quanity for assembly order..
problem is..
after creating sales order when we wanted to do change ..that time i am not getting availability quantity..
Thanksin Advance,
Anthyodaya...

Hello,
I hope you are using the Standard Assembly to Order strategy,in ATO if any changes in Sale order like Delivery date, Quantity will pass to production Order directly,vice Versa any changes in production Order will be passed back to Sale Order.
Generally in ATO availability check will be carried out at component level, Based on the availability date of component , the delivery date get adjusted.
Now explain me , what changes you have done in sale order, either date or quantity, what message you are getting during your availability check.
Regards
Pradeep

Every time system create new production order after releasing sales order c

Hi Guru,
FG material strategy: 82 (sales order creates production order).
After creating the sales order it goes in to credit block. Whenever we release sales order from credit block through VKM1, system has created production order. We confirmed this production order and delivered.
But after this sales person change the sales order value, because of which again sales order goes into the credit block and after releasing sales order from credit block system create new production order even if one production order already confirmed and delivered against the same sales order.
*Every time system create new production order after releasing sales order credit block.
Thanx & regards
pnu

PNU,
So, to restate:
In MD04, you have Unrestricted Sales order Stock ('E' Stock) on hand.
In the same MRP segment, and against the same Storage Location as the stock, you have a Sales Order requirement that was recently blocked and unblocked.
During the unblocking event, the system produced a new production order.
This is not normal. If the above accurately depicts your situation, I would look for an altered Strategy 82, or a userexit. SAP ATP (the beginning event of the Strat 82 process) will normally first check for the availability of stock. Only if the stock is not available, then it will create the new production order.
Best Regards,
DB49

Auto-create delivery for multiple sales orders

I would like to ask how to create auto-create 'single' delivery
for multiple sales order during release sales order in R11i.
It is found in my example during release sales order, multiple
sales orders fulfill release sales order criteria, a single pick
slip is generated but it is found that each sales order have
individual delivery with it. It will casue multiple pack slips
for a singles pick slip. Is it normal feature for auto-create
delivery, or any setup to solve it?
Thanks in advance.

Am not able to do Single Delivery for Muktiple sales orders
Have you searched the forum for this question as to why you were not able to generate ?? It could be due to multiple reasons. Please search the forum and update here what steps you have taken after taking the inputs from here, if the problem is still not resolved.
thanks
G. Lakshmipathi

GTS Stop delivery creation for blocked sales orders

We implemented Note 579357 to stop the creation of deliveries when sales orders are blocked and everything works correctly except for rush orders (order type SO).
After the note was applied, deliveries are not automatically created for rush orders even though the orders have gone thru screening in GTS and have been released. Any solution to this problem???

Dear GTS experts,
I'm facing exactly the same problem with rush orders that Sammy Chan describes in his original post.
I checked all replies but I have still no idea to solve this issue. The problem is that when creating the delivery during a rush order creation at the time the system reaches the copy condition with the implemented coding there is no order number available to check against in GTS.
As the whole thread is marked as answered I hope someone can help me.
Best regards,
Ulrich

Va01 , vbap-taxm1 field not should not be blank when save sale order

Hello all,
           I am working on sale order.I want if VA01,VA02,VBAP-TAXM1 fields kept blank while saving the sale order it should display a MESSAGE.can anyone please help me with this.
Thank in advance.

Write your code in MV45AFZZ USEREXIT_SAVE_DOCUMENT_PREPARE.
check for xvbap-taxm1 and throw error message.
write the below code after the error message.
PERFORM FOLGE_GLEICHSETZEN(SAPLV00F).
        CH_FCODE = L_C_FCODE.
        SET SCREEN SYST-DYNNR.
        LEAVE SCREEN.
other way is to ask your functional to add the field to in-completion procedure and then trigger this incompletion via exit, use the same save document prepare

When i save sales order, Getting error.......

Hi expert,
I have created my own standard order (from company code to master data maintenance and Pricing Procedure).
1. Here the problem is that when i save the sales order, getting message/error is that Financial document: No financial document assigned.
2. If click "Header Output Preview Icon (ctrlshftF1)" in the sales order,getting error/message is that No Output has been Selected for Printing.
Please help me out from this problem.
Looking forward to hearing from Expert soon.
Thanks in advance

Dear Kaviya
1) Probably you are trying to create an export order for which the field "Financial Doc" is made mandatory.
As you may be aware, few export orders are to be executed against Letter of Credit which should be created through VX11N. Once all the required datas are given in vx11n while saving, a document reference will be generated. This reference you should assign in sale order. To do the same, after giving the datas in sale order, select "Goto --> Header --> Billing Document". Here at the bottom screen, there is a field "Financial doc no". Assign the reference you got in vx11n. Now try to save the order.
2) I dont know why you are trying to print the sale order. Is it necessary.??
thanks
G. Lakshmipathi

Customer Master Creation Icon in Sales Order

Hi All
does any one know what is the setting to get the icon to create customer master in the sales order screen after u give order type and sales area in VA01. I am geting the same for standard SAP order type OR and not for my custom order type ZOR.
Regards
Yatin Thakkar

Have you tried Mr.Ravi's suggestion ??
That is delete the existing order type (assuming that you were trying in development server), copy the standard order type OR and rename it as ZOR and save.
After a few minutes, create a sale order and see how it works.
thanks
G. Lakshmipathi

Getting error while i save sales order

Hi,
I am getting error when i save my sales order that
Company code 1000 and co area 1000 have different period determination For this i maintain okkp also.
But still i am getting the same error.
Thanks in advance

Chk out for ur Fiscal Year variant in:
OKKP for ur controlling area and
OB37 for ur company code
Hope this helps
*Reward if does
Rgds

Creation of a Sales Order

Hello All,
I want to know if I can create a SO, based on material description and not based on material number?
Plz give hints on how can this be acheived?
Regards,
Rags.

Hi Rags,
This is not possible by any means in SAP. There is no way by which the material description will find the material number and do all the other functions like Availability Check, Stock etc.
If I imagine the reason for ur query, you could have seen somewhere a sales order where only material description is available without the material number.
This is possible. During VA01, the material number will be entered. Or the material number will be determined as mentioned earlier by Customer Material Inforecords. However the material number will be a hidden field in the sales order and hence the material number will not be seen. Due to this the material description along with quantity will be seen. I hope you have seen this somewhere.
This happens by creation of screen variants. If you ask tech guys they can explain you better on this. Else you yourself can see the top right corner of any screen , click the icon there and then configure how you want to see the fields/
Hope this helps

Auto po creation after save sales order.

Similar Messages

Maybe you are looking for